Error in Kpro server when checking in originals from NW Portal

Hi Experts,
I am not able to check in originals in my NetWeaver Portal.
When I try to save I get the follwoing error message:
- Error in Kpro server
But if I try in to check in the same original in the PLM system through SAP GUI it works just fine.
Any thoughts about what I can do?
Thanks in advance,
Mikael

Hi Mikahel,
I have tried changing the whitelist and now I am able to check-in document to a content server storage category but not able to display it..
Could you please tell waht additional setting you have done with data carrier?
We have maintained PC and Default front end..
Regards,
Aby

Similar Messages

Just getting: "There was an error contacting the server. Check your internet connection and try again"

When signing in from PSE12 i just get this error message: There was an error contacting the server. Check your internet connection and try again
Internet is working (access this forum) and adoberevel website works fine. Everything works but elements revel sign in from PSE12. PSE12 have been syncing thumbnails for several days - now have 48.000 of my revel library, but now it will not allow me to sign in again from PSE12.
Running Win7.
Any ideas ?

Hi,
I tried this but it did not work. Still getting: There was an error contacting the server. Check your internet connection and try again
I do not think there actually is a network issue, because if i try another username/password i do get: Please provide valid Adobe ID and/or password to sign in. So i assume PSE12/Revel Agent actually has a network connection to adobe.
Any other ideas?

It tells me that there's an error on the server when i enter my password. what can i do?

it tells me that there's an error on the server when i enter my password. what can i do???

This is not an issue with Firefox, your message actually confirms this by the error you listed. "There was an error on the server" Firefox is only an internet browser basically, the connection to the internet & such local configuration is outside external from Firefox, the server is on the host side of the connection. It sounds like you have a bad connection between the server & your computer which Firefox has nothing to do with, rather it is your local network. I would actually check out Windows 7 VPN support, you need to setup a virtual private network VPN which is basically a secure connection stable enough to support the bandwidth required to facilitate the meeting.
This is why you are also having the problem with Internet Explorer as you need to correctly configure a VPN connection via windows if your connection supports it.

" Errors have been discovered when checking the Expense Report"

Hi all,
I am getting this following error while trying to review the New Travel request
Error : " Trip cannot be saved in this status "
"Errors have been discovered when checking the Expense Report. Please correct them in order to proceed"
I am unable to save the travel request and I am stuck here.
Can someone provide me with a solution to this.
(We are using EP7, ESS 1.0 , EA-HR - 600,SP17 )
Thanks in advance,
NR

Hi all,
When i checked in the default trace file ... a statement " No end date for validity of trip schema PL defined in customizing. Infinite validity is assumed.# " is present ..
can some tell me what needs to changed in the SPRO settings ...

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Error starting ORMI server, when run oc4j.cmd -start

hello oracle guru,
i just finish installing the Oracle Business Intelligence Publisher Standalone 10.1.3.4 in Window XP Home Edition SP3 platform..
but when i want to start the BI Publisher, by running the oc4j, i get this errors
Starting OC4J from E:\OraInstall\OraBIP\oc4j_bi\j2ee\home ...
2010-10-13 17:33:17.453 ERROR ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]:persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
10/10/13 17:33:17 *** (SEVERE) ServerFile[PersistentMap,/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/persistence/jms.state]: persistence file could not be locked. Resolve the sharing violation by ending the process currently holding the file lock or by using a different persistence directory for one or both processes.
2010-10-13 17:33:17.484 ERROR Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
10/10/13 17:33:17 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.484 ERROR J2EE OJR-00011 Exception starting JMS server: Failed to set the internal configuration of the OC4J JMS Server with:XMLJMSServerConfig[file:/E:/OraInstall/OraBIP/oc4j_bi/j2ee/home/config/jms.xml]
2010-10-13 17:33:17.593 ERROR J2EE RMI-00002 Error starting ORMI server TOSHIBA port 23,791:Address already in use: JVM_Bind
2010-10-13 17:33:17.609 ERROR java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:433)
at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.java:347)
at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:210)
at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer.java:2378)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:966)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
10/10/13 17:33:17 Error starting ORMI server TOSHIBA port 23,791: Address already in use: JVM_Bind
10/10/13 17:33:17 Shutting down OC4J...
Can somebody who have been facing this error before this can guide me on how to solve the problem?

http://kr.forums.oracle.com/forums/thread.jspa?threadID=640696
Please check this link... it helped me in Solaris environment..it works for me.
All the best..
Thanks
Deependra

Error on Production Server when php service is called.

The web application runs fine on my development machine but on the production server it gives me the following error and no responce when a phpservice is called.
error:
Send failed
Channel.Connect.Failed error NetConnection.Call.BadVersion: : url:
'http://ipaddress/Project/public/gateway.php'
Network Monitor:
Development Machine:
Windows 7
MySQL 5.5.16
Zend Framework 1.10
Production Machine:
Ubuntu 11.10
MySQL 5.1.58
Zend Framework 1.11
I followed the following steps to deploy the application on production server;
1. created identical database with same credentials on the production server
2. confirmed that my php service works on the server by manually navigating to the php file and printing the data retrieved on the page
3. modified the paths in amf_config.ini to reflect production server
[zend]
webroot = "/var/www"
zend_path ="/usr/local/zend/share/ZendFramework/library"
library ="/var/www/Project/library"
services ="/var/www/Project/services"
[zendamf]
amf.production = true
amf.directories[]=Project/services
4. initialized the class by adding
// Initialization customization goes here
_serviceControl.endpoint = "http://ipaddress/Project/public/gateway.php";
in the .as file for the php service
I have also found from my zend server logs that when my php service is called its throws the following error:
PHP Notice: Undefined index: HTTPS in /usr/local/zend/share/ZendFramework/library/Zend/Amf/Response/Http.php on line 59
I doubt that there is anything wrong in the deployment process but please do let me know if you could think of something i might have missed.
The other thing im wondering is the php notice if it were to be caused due to different Zend Framework versions!
Kindly advice

EGJ Steens has post a fix at http://forums.adobe.com/message/4097998#4097998#4097998/Using Flash Builder
Zend framework 1.11 added an extra function in the Http.php file (which was mentioned in the post) and was fixed as follows
protected function isIeOverSsl()
        $_SERVER['HTTPS'] = 'off'; //Adding this line fixed the issue
        $ssl = $_SERVER['HTTPS'];
        if (!$ssl || ($ssl == 'off')) {
            // IIS reports "off", whereas other browsers simply don't populate
            return false;
        $ua = $_SERVER['HTTP_USER_AGENT'];
        if (!preg_match('/; MSIE \d+\.\d+;/', $ua)) {
            // Not MicroSoft Internet Explorer
            return false;
        return true;
My concern is if i wish to secure my application with ssl using HTTPS will this prevent me from doing so.
Any Pointers Anybody?

Check-out originals from Content Server to File server?

Hello Experts,
We have urgent requirement to check-out huge number of originals from the Content server and send to an application server (ftp server).
The input data that we can use to fetch the originals are PHOIO nunber or LOIO or Original File name.
I tested below function module but they does not seem to meet our requirements.
BAPI_DOCUMENT_CHECKOUTVIEW2 - Originals are checked-out to C:\Temp\
CV120_KPRO_CHECKOUT_TO_SERVER
CV120_KPRO_CHECKOUT_TO_TABLE
SDOK_PHIO_LOAD_CONTENT - here the content is written to table in binary mode.
CV120_DOC_GET_FILE
Also i tested program - DMS_KPRO_READ. In this case, manual action is required to select the path in front end where the originals needs to be checked-out.
Please help if you have suitable solutions.
Thanks!
sandeep

Hello Sandeep,
You can use "DMS_KPRO_READ" report to achive your purpose. In this report you will get PHIO ID & LOIO ID. with these ID's you will get originals path to download the files uploaded on content server to application server or FTP server.
Use F_BROWSE function to select all files in foreground/background to downlaod it on desktop. I have implement in my project & it is working fine till date.
Thanks
Pravin

Phone hog links give me error message "an error occuredon the server when processing the URL

When ever I click on the links sent from phone hog.com to earn free minutes I get the following error message. "An error occurred on the server when processing the URL. Please contact the system administrator" I have made several contacts with phone hog help and they claim it is my settings on my computer. However I contacted my internet provider TDS telecom and they indicated that this is a phone hog issue. I do not have any other problems with any other links I click on with this type of error message.

Hello msFit,
it's well known, that in all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

"there was an error contacting the server. please check your network connection and try again."

On my Ipad Revel is giving me the following error:
"there was an error contacting the server. please check your network connection and try again."
The Ipad is connectd to the internet and it's the only app not working. This has been going on for 6+ months.

I'm having the same problem on an iPhone and an iPad, while another iPhone and iPad are working perfectly, all on the same account. The Mac app is also working fine. I've reinstalled the apps on the iDevices and checked to make sure the region is set (it is) and all apps are up to date. What seems to happen is the app syncs perfectly, the blue progress bar shows the sync is complete, but the app continues to try to snyc, periodically flashing the connection error. If I quit or force quit the app or even force a restart of iOS 7.04, then open Revel, it immediately begins to sync, updates with no problem, but the sync icon continues to spin until I quit. Each time I activate the iDevice, I'm greeted by a message from Revel that the sync was interrupted. I open the app and it's back to the endless syncing and error messages.
Update: The problem continues. Message was edited by: lumierefl

Authorization error when running a report from the portal

Hello,
I am trying to run a certain report under a certain user in the portal.
If I run this report with this user from the BW it is working but if I run it from the portal with this user it doesn't. The error I receive in the portal is this:
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Errors while reading InfoProvider data
ABEND: Error in BW:
ABEND: You do not have authorization for the data transfer process
Which other authorizations the user needs?

Hey Roy,
Check with the User Portal Roles and all Authorization Objects in BW.
when we talking about Portal from BW - Is is URL portal or RFC Portal?
Thanks,
CP

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Error while creating user in LDAP (MS ADS) from SAP Portal 7.0

Hi,
Is it obliged to use SSL connection to create new user in LDAP (MS ADS) from SAP Portal 7.0 ?
I've configured the UME with ldap server adress and port 389. And use configuration file "dataSourceConfiguration_ads_writeable_db.xml"
I succeed to view users existing in LDAP but when I try to create new user I've the following error message:
LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0)
Thanks and regards

check this link
http://help.sap.com/saphelp_nw70/helpdata/EN/37/cfd93f130f9115e10000000a155106/frameset.htm
and at the end of the page there is a qoute "We strongly recommend that you configure SSL between the UME and the LDAP directory. Some LDAP directories, such as Microsoft Active Directory Server, require an SSL connection if you want to create users on the LDAP directory"
hence follow this link to configure SSL
http://help.sap.com/saphelp_nw70/helpdata/EN/7d/77fa735e5f47a2a50b5336fd1b5a61/frameset.htm
hope this helps..
[Rahul|http://rahulursportal.blogspot.com/]

Error in Kpro server when checking in originals from NW Portal

Similar Messages

Maybe you are looking for