Error in lens metadata

My Canon EF-S 15-85mm is being reported as a Canon EF 70-300 DO in Aperture 3.0.2
Has anyone else come across this type of error before and this one specifically? Is there a fix?
Thanks in advance.

Hi The Aardvark;
My camera is a Nikon D300 which started reporting my lens incorrectly. So I sent the camera in for repair. It turns out a logic board in had crapped out.
Allan

Similar Messages

  • Bex Report Designer: Error while loading metadata

    hi experts,
    I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
    Error while loading metadata.
    Check the Query and portal settings.(but the query is working fine in Analyzer).
    and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
    when i double click the error its giving below error details.
    Diagnosis
    An error occurred in the BI components on the SAP J2EE Engine.
    System Response
    Procedure
    Contact your system administrator to have the error analyzed in detail.
    Procedure for System Administration
    Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
    The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
    If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
    could you plz suggest me how to rectify the problem.
    regards
    vadlamudi

    Hi vadlamudi
    The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
    1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
    2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
    Regards,
    Janine

  • Errors in the metadata manager

    Hi Experts,
    Periodically we're seeing Error Event ID's 18 and 19 on our SSAS server (SQL Server 2008 R2) hosting SCSM Data Warehouse DB's.
    The cube's appear to be processing OK from what I can tell, but everything I can find online relating to these errors indicates some corruption in the Data directory.  We get these errors in two different, separate SCSM environments (SCSM 2012 SP1 UR4). 
    Has anyone ever experienced these Errors before?
    Below are the details for these Errors.
    Log Name:      Application
    Source:        MSSQLServerOLAPService
    Date:          1/9/2014 3:07:12 AM
    Event ID:      19
    Task Category: (289)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SCSMP06SQL.wcbbc.wcbmain.com
    Description:
    Errors in the metadata manager. An error occurred when loading the ReviewActivityCreatedByUser partition, from the file, '\\?\H:\OLAP\Data\DWASDataBase2.0.db\SystemCenterChangeAndActivityManagementCube.0.cub\ReviewActivityCreatedByUser.0.det\ReviewActivityCreatedByUser.223.prt.xml'.
    Log Name:      Application
    Source:        MSSQLServerOLAPService
    Date:          1/9/2014 3:33:08 AM
    Event ID:      18
    Task Category: (289)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SCSMP06SQL.wcbbc.wcbmain.com
    Description:
    Errors in the metadata manager. An error occurred when instantiating a metadata object from the file, '\\?\H:\OLAP\Data\DWASDataBase2.0.db\SystemCenterWorkItemsCube.0.cub\BillableTimeBilledByUser.1830.det.xml'.

    Hi David,
    Did you end up resolving this? I've just come across the same error this morning (different cube reference though) and am beginning to look at the issue.
    Cheers,
    Lain

  • Errors when writing metadata to files on Windows Server

    Good day!
    I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
    My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
    I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
    The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
    Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
    I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
    It looks to me like a timing related issue.
    Any ideas?
    (After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
    Any ideas?
    Yuval

    I Yuval
    I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
    Do you have solution to this? Or are you stuck as I am?
    Cheers, Chris

  • Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

    We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
    The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
    Any help would be appreciated.
    Thanks!
    Rich Oliver

    Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue.  I think it might be a timing issue with how lightroom interact with a slower write delay using network shares.  I suggest you also chime into this thread:  Lightroom 5 can't write metadata to DNG files   I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

  • Missing Camera and Lens Metadata after iPhoto Import

    I've noticed that the Photos for Mac app seems to have "lost" all of the Camera and Lens Metadata associated with each of my photos. Has this happened to anyone else?
    No matter which photo I choose, the Info inspector window shows "No Camera Information" and "No Lens Information".  I've confirmed that the Camera and Lens metadata is still present in the original iPhoto Library. 
    If I create a new iPhoto Library with just a dozen or so pictures and then choose that Library when launching Photos for Mac, by pressing the Option key while clicking the Icon, the photos are imported with the Metadata intact.  Clearly something went wrong with the import of my much larger main iPhoto library. (The main library has over 100,000 photos in it.)
    I'm wondering if there is some way to force Photos for Mac to re-index the Metadata.  Any thoughts?
    Thanks,
    Michael

    I have the same problem.. no lens metadata
    will rebuild library with  alt-cmd-start-Photos help?
    first pic imported in photoshop from Photos app 
    second pic from iPhoto

  • BPC Installation :Errors in the metadata manager

    Hi All,
    We are trying to install BPC MS 10 and getting an error message during the installation: 'Errors in the metadata manager. Either the database role with the ID of 'EnvironmentShell Role' does not exist in the database with the ID of 'EnvironmentShell', or the user does not have permissions to access the object.'
    Here is Logs:
    ==============[System Error Tracing]==============  [System  Name] : OLAPServerHandler  [Message Type] : ErrorMessage  [Job Name]     : Olap9Manager : DeleteRole  [DateTime]     : 6/11/2014 5:07:07 PM  [UserId]       :   [Exception]       DetailMsg  : {Microsoft.AnalysisServices.OperationException: Errors in the metadata manager. Either the database role with the ID of 'EnvironmentShell Role' does not exist in the database with the ID of 'EnvironmentShell', or the user does not have permissions to access the object.      at Microsoft.AnalysisServices.XmlaClient.CheckForSoapFault(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError)     at Microsoft.AnalysisServices.XmlaClient.CheckForError(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError)     at Microsoft.AnalysisServices.XmlaClient.SendMessage(Boolean endReceivalIfException, Boolean readSession, Boolean readNamespaceCompatibility)     at Microsoft.AnalysisServices.AnalysisServicesClient.SendExecuteAndReadResponse(ImpactDetailCollection impacts, Boolean expectEmptyResults, Boolean throwIfError)     at Microsoft.AnalysisServices.AnalysisServicesClient.Delete(IMajorObject obj, ImpactDetailCollection impact, Boolean ignoreFailures)     at Microsoft.AnalysisServices.Server.Delete(IMajorObject obj, ImpactDetailCollection impactResult, Boolean ignoreFailures)     at Microsoft.AnalysisServices.MajorObject.DropPrivate(DropOptions options, XmlaWarningCollection warnings, ImpactDetailCollection impactResult, Boolean analyzeImpactOnly)     at Microsoft.AnalysisServices.MajorObject.Drop(DropOptions options)     at Osoft.Services.Platform.YukonAdmin.Olap9Manager.DeleteAllRoles(String strDBName, String& strMsg)}  ==============[System Error Tracing  End ]==============
    Did you have any idea?
    Thank you in advance.
    Regards,
    Wafa

    Hi Roberto,
    Thank you for your answer.
    I can complete the installation by clicking on the 'OK' button. As if the error is ignored by the system during the installation.
    But, after the installation is completed, the deployment of the OLAP cube with (with restore) is not working. we get an error message. I think it is related to the first one.
    Is it mandatory to restart the Send Governor after the installation?
    Thank you very much for your help!
    Regards,
    Wafa

  • PowerView Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later

    SQL 2012 SP 1 CU4 applied. Now getting " Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later"
    Any ideas what could be causing it to send the incorrect version?

    amaltsev1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • "Error parsing MPEG Metadata file.

    I have been using Encore for about 4 years: 1.5 -> 2.
    Recently I have had problems with projects exported as an avi file from Premier 2 and used in a simple menu and timeline in Encore 2. Typically projects were about an hour long. Chapter points were added in Encore automatically every 3 mins for general navigation assistance. I checked the project was OK and pressed Build. After watching the video transcoding progress bar creep to 100%, the error message appears immediately the process appears to have completed - "Error parsing MPEG Metadata file. Deleting or renaming filename.m2v.xmpses" will allow you to import, but any markers will be lost". On the previous occasion I went back to the assets, highlighted the avi file and transcoded it manually (automatically). No error message. I then built and burned the DVD.
    I have sometimes cured problems by removing any info from the final chapter point - delete the visible info. This may have just solved this last problem despite the initial build being reported as being free of problems. Following the first problem I rechecked and was told there was a problem with the final chapter point. I deleted the chapter point info and it has built and burned satisfactorily.
    Two questions.
    What is causing this problem. I have burned lots of DVDs over the years with Encore. Is the use of chapter points the cause of the problem. There have been quite a lot of reports of this in other (Matrox) forums. I am using Matrox RTX100. How can I prevent this huge waste of time - a build may take me a couple of hours.
    Is it better to export the Premier Pro2 timeline as an avi and use Encore for the transcoding, or is it better to export a trancoded file from Premier directly and just include this in the Encore project. If yes, which format should I export it in. I have the Premier and Matrox transcoding options.
    Roger

    Not sure if this is causing the error, but since version 2 Encore automatically adds a chapter point on the last available GOP. It could be that the last of your 3 minute chapter markers is closer to this final chapter point than 0.4 seconds. The DVD-Video specification requires chapter points to be at least 0.4 seconds apart.

  • Aperture 3.1 doesn't export lens metadata

    When I export images from Aperature (File->Export->Version), they are missing lens metadata.
    I exported a master version of an image and a version of the same image.
    I open both the master and the version in DxO.
    The master contains lens metadata with a value of "18-105mm f/3.5-5.6" and the version is simply blank.
    This is a fresh copy of Aperature 3.1, with no plugins, and I can repeat this behavior for any master image that contains lens metadata.
    Is this a bug that will be fixed in a Aperature update? This is a very frustrating bug.

    I bought AP 3.1 after my metadata nightmares with iPhoto '09 (I wasn't going to pay for '11). AP 3 has some nice features (like iPhoto on steroids) and its metadata handling is much better than iPhoto. But this bug is really, really messing with my photo processing workflow.
    I'm going to keep looking for a solution (I haven't had the time thus far) and will update the thread. Thanks for the confirmation of the bug, and the commiseration
    -Elliot

  • "not known error system" saving metadata

    very often, but no always, when I save metadata in the file, appear an "not known error system" message

    Hi, thanks for reply,
    I use mainly raw files,
    Giancarlo Majocchi
    cell +393356263390
    www.buildup-it.com
    Inviato da iPad
    Il giorno 17/mar/2014, alle ore 13:19, Tony Jay <[email protected]> ha scritto:
    Re: "not known error system" saving metadata
    created by Tony Jay in Photoshop Lightroom - View the full discussion
    Hi welcome.
    Are you able to furnish information about which files metadata is being saved - RAW files (XMP sidecar files in reality), JPEG, TIFF, PSD etc?
    Are there any patterns to this error message appearing?
    Tony Jay
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6216084#6216084
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6216084#6216084
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6216084#6216084. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Error Parsing MPEG metadata file (repeatedly!)

    Hello, I am getting the error message "Error parsing MPEG Metadata file. deleting or renaming <pathname>\cache\temp_transcodes\ss_aJstrm_5\ss_AJstrm_v5.m2v.xmpses" will allow you to import, but any markers will be lost". <br /><br />I have a fairly simple DVD (I think) ..one menu (PAL_Projector-MENU) and 9 slideshows of JPEG images. I start to build a DVD or DVD Folder (tried both). I get "no errors detected" when I do a Project check.<br /><br />I keep cycling through these error messages hoping I am eventually going to get to the end. I delete the files as it suggests, and restart after it forces a save. I have gone round the cycle about 10 times - not sure when it's likley to end.<br /><br />Help anyone?<br /><br />XP Pro SP2, Pentium 4 CPU 3.00 GHz, 2GB RAM. <br /><br />Thanks<br />Mark

    M,
    Like I said, i don't use encore for slideshows, so I can't really give expert advice on this one. However I do 90% of my video productions with adobe software and 10% with pinnacle. I have had WAY too many issues burning DVD's and Playback issues and rendering issues with pinnacle, however their music video/slide show automation is by far the best out there. Aside from software we'll get back on topic. I would recommend starting a whole new slideshow from scratch. Create a new project, import new photos, etc. Start with the basics to do your trial and error. Don't use a menu, don't loop anything. Just import, set your title button to the first picture, and set the end action to stop. Then try to burn, however instead of wasting discs, try writing an image file, or even just build the dvd folders. Other than that, I'm not too sure what direction to head, but start basic and trial and error everything from that point. If you have msn you can contact me at [email protected] and maybe i can further assist you. Either way, let me know how you make out.

  • Error while importing : /metadata/iam-features-ldap-sync/LDAPUser.xml

    Hi,
    I am unable to import modified Oracle Identity Manager metadata. I am using OIM 11.1.1.5 on Windows Server 2007 EE.
    I am trying to use the import/export functionality via EM.
    I am able to export the LDAPUser.xml file from */metadata/iam-features-ldap-sync/LDAPUser.xml,* have made changes to it but when I am importing it back I am getting the error :
    Error occurred while executing operation.
    MDS-00001: exception in Metadata Services layer
    MDS-01059: document with the name /metadata/iam-features-ldap-sync/LDAPUser.xml missing in the source metadata store
    The values of the parameters in the import MDS operations are :
    fromLocation : E:/MDS/import/ +(On the physical server hosting the OIM)+
    docs : */metadata/iam-features-ldap-sync/LDAPUser.xml*
    restrictCustTo:               
    excludeAllCust: false
    excludeBaseDocsan : false     
    excludeExtendedMetadata : false
    cancelOnException : true
    I have tried using the command line script as well, It runs without a hitch but when I try and import back, it gives me the same old unedited document.
    Has anyone been successful with this approach ?
    Regards,

    Yes, I have. But still the same issue. It seem to run fine using the weblogicImportmetadata.bat fine but when I export and check the updated file, I still get back the original.
    Here's what I get on runnung the weblogicImportmetadata.bat file
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Starting import metadata script ....
    Please enter your username :weblogic
    Please enter your password :
    +Please enter your server URL [t3://localhost:7001] :t3://localhost:7001+
    Connecting to t3://localhost:7001 with userid weblogic ...
    Successfully connected to Admin Server 'AdminServer' that belongs to domain 'OIM
    +1'.+
    Warning: An insecure protocol was used to connect to the
    server. To ensure on-the-wire security, the SSL port or
    Admin port should be used instead.
    Location changed to domainRuntime tree. This is a read-only tree with DomainMBea
    n as the root.
    For more help, use help(domainRuntime)
    Disconnected from weblogic server: AdminServer
    End of importing metadata script ...
    Exiting WebLogic Scripting Tool.
    C:\Oracle\Middleware1\Oracle_IDAM\server\bin>
    Edited by: 810367 on Aug 21, 2012 6:45 PM

  • Error,while importing METADATA  from production to development

    Folks,
    I am getting the following error while importing the metadata. I have exported from production server and want to do some modification to the existing mappings. Can some body help me to resolve this?
    Here is the error.
    Import started at 10/07/2004 11:12:19 AM
    * Import for OWB Release: 9.0.2.56.0 Version: 9.0.2.0.0
    * User: owb_rep Connect String: (DESCRIPTION=(ADDRESS=(HOST=vectrenabp)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=SDWSTEST)))
    * Data File: C:\oracle\OWBHome\owb\bin\win32\SDWSDEV-MAPPINGS-20041007_0916.mdl
    * Log File: c:\oracle\OWBHome\owb\bin\win32\Log.log Log Message Level: ALL
    * Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
    * Ignore Universal Identifier: N Commit At End: Y
    Informational at line 15: MDL1205: PROJECT with Unique Object ID (UOID) <85247BBFEA1B44C6B10CDB3B70155A63> already exists, so PROJECT with physical name <SDWSDEV> and logical name <SDWSDEV> not imported.
    Informational at line 24: MDL1205: DATAWAREHOUSE with Unique Object ID (UOID) <268F5A9F43364309A8C0D01374C4A867> already exists, so DATAWAREHOUSE with physical name <DWH_TARGET> and logical name <DWH_TARGET> not imported.
    Error at line 141: MDL1247: Error occurred importing mapping <DWH_ZIP_CODE_DMGRPHCS_DIM_MAP/DWH_ZIP_CODE_DMGRPHCS_DIM_MAP> (at line 141).
    Detailed Error Message:
    API2014: Internal Error: Error in createStage:

    I have selected the option
    Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
    1. deleting the existing mapping and tried.
    2. Putting the mapping in recycle bin and try.
    3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
    Error occurred importing mapping
    <DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
    (at line 141).
    Detailed Error Message:
    API2014: Internal Error: Error in createStage:
    In above all cases it is giving me the error.
    Could you please help?

  • Error while loading metadata in HPCM application using Import Staging table

    Hello All,
    I was loading metadata in HPCM using Import Staging table. I successfully uploaded Driver Definition metadata.
    However while loading "Driver Exception" metadata, I am not able to load it successfully. I have checked the HPCM logs but found nothing. I then checked the "Import Exception" table and found the following error message.
    ERROR_POPULATED_DIM_COLUMNS_DO_NOT_MATCH_STAGE_DEFINITIONCan anyone please help me with this.
    Regards,
    -SM

    It is a bug and there is a patch available.
    Oracle Support - "Bug 12905298 : INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
    Patch = 12905298: INTERFACE FAILS TO INTEGRATE ON STEP "LOAD DATA INTO PLANNING"
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for