Error in net!

Hi, i'm writing a googledorking program and when i try to search its just opens my homedrive. Is it maybe becuse of the =, +, - ? (it's work fine with just www.google.com for exampel)
                    try {
             Runtime.getRuntime().exec("explorer /search?hl=com&q=intitle%3Aindex.of+%2B+"+type+"+%2B+%22"+name+"%22"+banned+"&btnG=Google-s%C3%B6kning&meta=");
                 } catch (IOException ex) {
    }Thanks!

Crossposting time sink alert!
http://forum.java.sun.com/thread.jspa?threadID=707999

Similar Messages

  • Open PO LSMW Quantity conversion error in net price calculation

    Hi gurus,
    I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
    Please help
    Thanks

    Hi Jürgen,
    Where in the Material Master can I find the conversion ratio between both units?
    Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
    Please help

  • Get "Error in Net Price Calculation" error while creating a Purchase Order

    I am getting a error when i try to create a PO. Says "Error in Net Price Calculation item 00010(Please correct)"
    I have defined conditon records with the price for the material  and have also created info record.However the price in the info record (including currency i.e USDN is different than the one defined in the conditon records currency is USD).
    However the price is different from the one defined in info record and in material master.
    Where is it picking the price from also is there any way to edit the price in material master or info record ?
    Also when i view the condition records by using Tcode MEK1 i get the following error
    "Access Pricing Purchasing Z00q 20 contains no fields"
    I know Z001 is the access sequence
    Can any one tell me wht is this error message about ?
    Edited by: Dspsac on Jan 29, 2008 4:31 AM

    how can u maintain the condition record as well as info record for a vendor -material in the same time frame
    it is not possibe
    as info record is also 1 of the condition table
    if u have maintained the info record then system is going to fetch the data from there but point top notice is it depends on the validity of record
    system fetch the price from info record
    and the currency used is fom vendor master

  • Error in net price calculation In PO

    Dear all,
    I created a new pricing procedure where i am getting an error message in PO i.e.
    "Error in net price calculation, item 000010". Message no. 06213
    Please advise me how to overcome the error.
    Thanks
    Prasant

    Dear Prasanth,
    Check the condition schma -> Control data
    here Condition Type NETP-Net Price
    this condition type were it is applied in total condition how it reflecting to total pricing scema
    hope this will helps you
    Prem

  • Message no. 06211 Currency translation error in net price calculation

    Hi,
       When i am creating purchase order i am changing currency from INR to JPY for FOB condition type only, And system issuing error message Currency translation error in net price calculation. Document currency is INR.
    When i am using USD i am not getting this error.
    I have checked table OB08 and both conversion maintained INR to JPY AND JPY to INR valid from 01.01.2012
    Any solution for this please.
    Thanks in advance.

    Hi, Check in T-code M/08 for your import prizing procedure,what have you maintained for subtotal for gross price condition (PBXX,PB00), Maintain over there as '9', also for JPY currency there is issue with decimal also, ratio maintained in 100:1 ratio.
    Edited by: tej yadav on Jan 6, 2012 1:29 PM

  • ME21N--Quantity conversion error in net price calculation

    Hi MM experts,
    Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
    The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
    i) the conversion results in a net price that is too high, or
    ii) the conversion factor for the units has not been properly maintained.
    iii) Check whether the units of measure and their conversion factor are correct.
    I have checked material master>unit of measure> 1 PL = 22 KG maintained.
    Can you please tell me how to resolve this issue?
    Appreciated early response.
    Thanks in advance.
    Suresh

    Hi Suresh,
    Please check on Material Master Data - Accounting 1 tab - Price Unit
    Moshe

  • HTTP Transport Error in Net BEans 6.5

    Hello,
    I am consuming a web service using JAX-RPC. I am trying to log onto a web interface through my program but I am getting the following error:
    Feb 6, 2009 1:10:54 PM ttsample.Engine Login
    SEVERE: null
    java.rmi.RemoteException: HTTP transport error: java.net.UnknownHostException: http; nested exception is:
    Logged in...
    HTTP transport error: java.net.UnknownHostException: http
    at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:819)
    at ttsample.Engine.Login(Engine.java:77)
    at ttsample.Main.main(Main.java:30)
    Caused by: HTTP transport error: java.net.UnknownHostException: http
    at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
    at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
    at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:802)
    ... 2 more
    I searched the web and found that this is a proxy setting proble.
    I configured apache earlier to use the local host that run the web client.
    When I change the http port host and port number and try to login into the web client its giving me page not found error.So I changed the proxy settings to default and then restarted the system and then tried to log into the web client and it worked.
    I dont know where i am going wrong.I want to consume the WSDL and log into the web client but i am gettingthe above error.
    Anyone's help will be greatly appreciated.
    Thank You,
    Sravanthi.

    Where did you get the address: http://sal006.salnetwork.com:82/bin/lccountrycodes.cgi (shouldn't the 82 be 83 instead?)

  • Quantity Conversion Error in Net Price Calculation

    We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process"  Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
    No Instance of Object type PurchaseOrder has been created. External Reference
    Puchase Order still contains faulty Items
    Quantity Conversion Error in Net Price Calculation
    Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
    Thanks in advance.

    Hi Robert,
    Regarding this backend error E 212 06 Quantity conversion error in net
    price calculation.         
    This error is because in the PO Order price unit is empty. And          
    quantity is null. So, please enter the quantity and order price unit          
    for this PO and order the PO again. Or you can retransfer the      
    PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need       
    to input the PO header guid, which you will get it from tx.BBP_PD             
    by providing PO number and object type as BUS2201).
    This has worked for other customers.
    Hope this helps,
    Kind Regards,
    Matthew

  • Quantity conversion error in net price calculation in BAPI_PO_CREATE1

    I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
    quantity conversion error in net price calculation.
    plz guide me to remove it.

    Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
    Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
    Good luck!

  • Error in net price calculation, item 000010 (Please correct)

    Hi
    Can you tell me error and correction for the same ? It occurs during creation of Std.PO. whom RM1000 prcing procedure is assigned.
    Error in net price calculation, item 000010 (Please correct)
         Message no. 06213
    Diagnosis
         Possible causes:
         o   The net price is negative.
             Check the prices and conditions entered.
         o   An error has occurred during currency translation.
             Check whether the foreign currency is defined in the system.
         o   The unit of measure of an item is not allowed.
             Check the units of measure entered.
         o   An internal error has occurred during the price determination
             process.
             A mandatory condition type is not defined in the system. Please
    In the analysis under item details condition tab I got message 301 as Acess 0002 12 is missing.
    Acess seq. 0002 is assigned to condition type PB00.

    I know this thread is very old but I had the same issue and found the solution.
    Enter the SubTotal in the pricing scheme for condition P101 (in my Case 9 - Copy values to KOMP-BRTWR (gross value)).
    Than it works for my case.
    Hope this helps.

  • Using Mountain Lion and getting "Error 102 (net::ERR_CONNECTION_REFUSED)" from some domain names that work on other computers on my network.

    I can not load some websites/domain names through Firefox,Chrome & Safari. It seems like a DNS caching issue to me. I have tried flusing DNS cache and changing to to public nameservers with varying success. The domains will load on other versions of OSX on my network, so Iappears to be an OS version issue. Any help would be greatly appreciated.
    Chrome Error
    Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection.
    Firefox Error
    Firefox can't establish a connection to the server at domainname.com
    Safari Error
    Safari can't open the page "http://domainname.com" because Safari can't connect to server "domainname.com".

    The following update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many. http://support.apple.com/kb/PH11143
    From braden85:
    About changing or updating printer software in Mountain Lion:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622

  • Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

    Hi,
    I am using APEX version 4.2.1.00.08 with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    I've developed an application, that was working fine till 3 days ago...
    At the moment, I can log into the application but when I enter my ID/PW it takes me to my 1st page but then it runs for a mint or so (trying to load charts) and then generates following error message
    No data received
    Unable to load the webpage because the server sent no data.
    Here are some suggestions:
    Reload this webpage later.
    Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
    interestingly, I haven't changed anything within the application
    I've tried it with Chrome Version 27.0.1453.116 m and IE 8.0...
    with IE 8.0, it shows I/O Error in place of my graphs and get's a pop up message that displays "Error - error unknown"
    The only thing that I can recall doing differently is logging via remote desktop connection, but I've used remote desktop in the past as well and it worked.
    Please advice

    anyone...?

  • Oracle 10g: Initialization error SQL*Net not properly installed

    Hello, everyone.
    I have an app that uses Oracle 10g client to connect a remote Oracle 10g server.
    I encountered a pop-up error saying
    " Initialization error SQL*Net not properly installed. "
    OracleHomeKey: SOFTWARE\ORACLE
    OracleHomeDir:
    Please advise a fix.
    Thanks.

    Maybe PL/SQL Developer is trying to use some missing registry values, or a missing ORACLE_HOME environment variable
    Check the ORACLE_HOME is pointing to your 10g client path, and then try to add the following entries in the registry, making a .reg file with the following, replacing with your paths, and executing (from Windows PATH variable
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
    "inst_loc"="C:
    Program Files\\Oracle
    Inventory"
    "API"="D:\\oracle\\product\\10.1.0
    db_1"
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES]
    "HOME_COUNTER"="1"
    "DEFAULT_HOME"="HOME0"
    "LAST_HOME"="0"
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES\ID0]
    "NAME"="Oracle - ORACLE_HOME"
    "PATH"="D:\oracle\product\10.1.0\db_1"
    "NLS_LANG"="NA"
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0]
    "ID"="0"
    "ORACLE_GROUP_NAME"="Oracle - ORACLE_HOME"
    "ORACLE_HOME_NAME"="ORACLE_HOME"
    "ORACLE_HOME"="D:\\oracle\\product\\10.1.0\\db_1"
    I hope this help
    Regards,
    Alfonso Vicente

  • Diagnosing errors from Net Services trace files

    Hi,
    does anybody have a link to any documentation where it's explained how to interpret errors in Net Service trace files. For example, a snippet of a trace file looks like this:
    [30-JUN-2009 14:32:39:302] nttcni: trying to connect to socket 1836.
    [30-JUN-2009 14:32:40:224] ntt2err: entry
    [30-JUN-2009 14:32:40:224] ntt2err: soc 1836 error - operation=1, ntresnt[0]=511, ntresnt[1]=61, ntresnt[2]=0
    [30-JUN-2009 14:32:40:224] ntt2err: exitI suppose that ntresnt[1]=61 means means (from metalink DocId 67211.1):
    WSAECONNREFUSED 61 10061
    Connection refused. No connection could be made because the target machine
    actively refused it. This usually results from trying to connect to a service
    that is inactive on the foreign host.
    But what about the other part:
    operation=1, ntresnt[0]=511
    Does anybody know what "operation" and the "511" code mean?
    Thank you in advance for any answer.
    Regards,
    Jure

    Look at metalink note 156485.1 "Examining Oracle Net Trace Files"

  • Error inesperado​: net.rim.de​vice.api.i​o.Connecti​onClosedEx​ception: Connection closed

    Estimados,
    Les consulto, luego de intentar verificar mi numero para bajar la aplicacion de whatsapp me aparece el siguiente mensaje: Error inesperado: net.rim.device.api.io.ConnectionClosedException: Connection closed, podrían ayudarme con esto?
    Saludos,

    Estimado Usuario, lamentablemente este foro es solo para el idioma Ingles, sin embargo lo podemos ayudar en el foro especializado en Español, esta es la dirección donde gustosamente lo podemos atender:
    http://foros.blackberry.com/t5/Foros-de-Soporte-Ge​neral/ct-p/bscf_es
    Muchas gracias
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Chrome error :Error 324 (net::ERR_EMPTY_RESPONSE) : The server closed the

    hi,
    I have installed Oracle Database Express Edition 11g Release 2.2.0 on Windows 7 Home Premium x64.
    when i click the get started with oracle database 11g Xe destop icon ..i am getting error in chrome
    No data received
    Unable to load the webpage because the server sent no data.
    Here are some suggestions:
    Reload this webpage later.
    Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
    please help with this error..

    IE error..
    Internet Explorer cannot display the webpage
    This problem can be caused by a variety of issues, including:
    •Internet connectivity has been lost.
    •The website is temporarily unavailable.
    •The Domain Name Server (DNS) is not reachable.
    •The Domain Name Server (DNS) does not have a listing for the website's domain.
    •There might be a typing error in the address.
    •If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.

Maybe you are looking for