Error in process chain DTP not executed
Hello,
Sorry tried to find the most appropriate forum, not sure it is the one. Am a newbee
In a process chain we have a event passing information from one cube to another that stops and do not go until the end of the job. But it doesn't happen all the time, which is rather strange.
Here is the log when everything goes well:
2007-11-16 Dynamic List Display 1
Job log Job log Message text uncoded Msg.typ Message ID Msg.no.
16/11/2007 10:46:44 Job started S 0 516
16/11/2007 10:46:44 Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE) S 0 550
16/11/2007 10:46:52 Performing check and potential update for status control table S RSM1 490
16/11/2007 10:46:52 Performing check and potential update for status control table S RSM1 490
16/11/2007 10:46:53 Status 'Executable' (user ALEREMOTE) S RSBK 223
16/11/2007 10:46:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465300 S RSM 703
16/11/2007 10:46:58 Status 'Active' (user ALEREMOTE) S RSBK 223
16/11/2007 10:46:59 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16322_1 with ID 10465800 S RSM 703
16/11/2007 10:46:59 Job finished S 0 517
And here is the one when it stops:
2007-11-16 Dynamic List Display 1
Job log Job log Message text uncoded Msg.typ Message ID Msg.no.
16/11/2007 10:48:27 Job started S 0 516
16/11/2007 10:48:27 Step 001 started (program RSPROCESS, variant &0000000006327, user ID ALEREMOTE) S 0 550
16/11/2007 10:48:35 Performing check and potential update for status control table S RSM1 490
16/11/2007 10:48:36 Performing check and potential update for status control table S RSM1 490
16/11/2007 10:48:36 Status 'Executable' (user ALEREMOTE) S RSBK 223
16/11/2007 10:48:36 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_16328_1 with ID 10483600 S RSM 703
16/11/2007 10:48:41 Status 'Active' (user ALEREMOTE) S RSBK 223
16/11/2007 10:48:42 EXTRACTION OF DATAPACKAGE 000001 S RSAR 51
16/11/2007 10:48:42 Processing of data package 000001 started S RSBK 244
16/11/2007 10:48:43 All records forwarded S RSM2 730
16/11/2007 10:48:44 SQL: 16.11.2007 10:48:44 ALEREMOTE I DBMAN 99
16/11/2007 10:48:44 ALTER TABLE "/BIC/FZHREMPL" ADD PARTITION I DBMAN 99
16/11/2007 10:48:44 /BIC/FZHREMPL0000000430 VALUES LESS THAN I DBMAN 99
16/11/2007 10:48:44 (0000000430 ) TABLESPACE "PSAPCAR" I DBMAN 99
16/11/2007 10:48:44 SQL-END: 16.11.2007 10:48:44 00:00:00 I DBMAN 99
16/11/2007 10:48:44 SQL: 16.11.2007 10:48:44 ALEREMOTE I DBMAN 99
16/11/2007 10:48:44 ALTER TABLE "/BIC/FZHREMPL" MODIFY PARTITION I DBMAN 99
16/11/2007 10:48:44 /BIC/FZHREMPL0000000430 REBUILD UNUSABLE LOCAL I DBMAN 99
16/11/2007 10:48:44 INDEXES I DBMAN 99
16/11/2007 10:48:44 SQL-END: 16.11.2007 10:48:44 00:00:00 I DBMAN 99
16/11/2007 10:48:44 SQL: 16.11.2007 10:48:44 ALEREMOTE I DBMAN 99
16/11/2007 10:48:44 ANALYZE TABLE "/BIC/FZHREMPL" PARTITION ( I DBMAN 99
16/11/2007 10:48:44 /BIC/FZHREMPL0000000430 ) ESTIMATE STATISTICS I DBMAN 99
16/11/2007 10:48:44 SAMPLE 10 PERCENT I DBMAN 99
16/11/2007 10:48:44 SQL-END: 16.11.2007 10:48:44 00:00:00 I DBMAN 99
16/11/2007 10:48:45 Job BIDTPR_16328_1 no longer exists S BT 127
16/11/2007 10:49:45 Technical status 'Green' (user ALEREMOTE) S RSBK 224
16/11/2007 10:50:45 Status transition 8 / 8 to 8 / 8 completed successfully S RSBK 222
16/11/2007 10:50:46 Overall status 'Green' (user ALEREMOTE) S RSBK 225
Can anyone help and tell me where i could search to improve performance...I don't want a plain vanilla answer but some leads to an answer would already be very helpfull
Thanks a lot in advance
Dear friends
I am also facing the same issue :
Below is the job log when the DTP is completed successfully,
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
But when its yellow forever or failed, I get the below Job log
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
Can anyone help, is this happening because there is no resouce available to schedule "RSBATCH_EXECUTE_PROZESS".
Any help is appreciated!
Regards
MultiABAP
Similar Messages
-
Error in process chain variant when executing BI IP planning sequence
Hi All,
I am trying to execute a planning sequnce as a background job using a process chain. Here one of the variant failed giving an error as : Overflow occurred when calculating <Key figure name> with value 6.5231044352058409E18+.
I tried executing that process chain variant separately using the ABAP program RSPLS_PLSEQ_EXECUTE as a background job, but still its not working.
At last I tried executing the individual planning step in the planning modeler, but again the same error.
Earlier such case was resolved by compressing the planning cube requests and executing the failed variant using the ABAP program, but this time even compression is not helping to solve this.
Can anyone please help on this issue ?Hi Andrey,
This Key figure is created of the data type CURR (Stored as decimal) for Amount type. Now the length of CURR is maintained by SAP as 17 with 2 decimal places, so do you mean that I have to switch to other data type to hold the large value that is getting generated.
My concern is : the error is coming for just one of the variant of the chain and not for other variants. If it has something to do with the KF data type, then certainly all others variants must have thrown the same error. -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Error in process chain TRIGGER_BW_CHAIN
Hello,
I am working with SAP BPC 7.5 NW and I have a issue when I execute a process chain in BPC that call one process chain in BW.
When I execute the process chain from BW (TA RSPC) the process chain finish correctly but when execute the process chain throught DataPackage in BPC the process chain is stoped in one point of the chain. In BW, the process chain do not display error but in BPC the log shows:
An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was neither handled locally, nor declared in a RAISING clause
Call of the method IF_RSPC_GET_PARALLELIZATION~IS_SYNCHRONOUS of the class CL_RSPC_ABAP failed; the obligatory parameter I_VARIANT has not been filled
Application: MAIN Package status: ERROR
Thanks you in advance,
RegardsHi
We applied SAP Note to (1420224) to fix this issue. Now I can execute BW process chains from BPC Data manager package using /CPMB/TRIGGER_BW_CHAIN process. From within the BPC Package link, this process starts BW process chain to load data into the DSO which is followed by package to import data loaded into the DSO to BPC Rate Application.
Regards,
Oscar -
Error in process chain (psa data)
We have got an error in our PROCESS chain for master data.
Info object Name : 0customer
In that it was showing there was error in our request. When I wanted to correct data in the request there it was showing no error records. All the records are good and also it is showing as error in request. I have deleted the request from infoobject and also from the PSA. And the last updated good request is also showing error as No data packets available for the request .
0Customer is delta update ; Process chain is daily based.
My doubt is whether the records in the deleted requests will be reloaded again from sap R/3 into PSA, as requests during Process chain or not.
While monitoring the request details in Monitor u2013 Administrator Work bench, it shows the following:
1. Requests (messages) Everything Ok
2. Extraction (messages) Missing messages
3. Transfer (IDocs and TRFC) Missing messages
4. Processing (data Packet) No data
5. Process chains : Everything Ok.
Even after deleting the requests my process chain is not getting updated.
Kindly help me in solving the above problem
Regards
PadmaHi,
Once deleted the request, try to manually trigger the load and see whether it completes. if it completes and pulls reocrd then you can push the chain process ahead with the program RSPC_PROCESS_FINISH
Regds,
Shashank -
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
Infopackage in process chain is not scheduling
Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balajiHi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen -
Hi All,
I have created the Process Chains and Scheduled the Process chain on early morning 2.00AM. In STart variant, i have specified the time and date and saved the Process Chains. I have checked the Scheduled job in SM37 and found,BI_PROCESS_TRIGGER is scheduled. Today i have checked the Log view and found Chain has not executed.
Can u pls help on this issue.
Thanks,
Jelina.Hi Jelina,
In the scheduling options,check whethre you have selected direct scheduling or with meta chain. Make the desired one and also if you want it to repeat periodically, then Check the Periodic job checkbox and select the periodic vaules from the Period Values Tab.
Hope this helps... -
Process chain is not getting scheduled
Hi all ,
Process chain is not getting shceduled , i have saved , checked and wanted to activate but its going to a loop and its not getting activated . please suggest some solution
Regards
AkhileshHi Akhilesh,
Can you check that your user has the necessary authorizations to schedule a job? Can you also check if there
is an error message generated in sm21 or dump in st22? You say as well that the scheduling is looping, in sm50 what
table/statement is the process looping over? Can you also let us know your BW release and support package level.
Best Regards,
Des -
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa.
Maybe you are looking for
-
I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received
-
Install print driver in 10.4, and make it show on the print drivers list.
Hi, I can't seem to install my Canon print driver, and make it show on the print drivers list. I have a Canon MP180 as a network printer on a Windows Computer, and it requires special printing drivers, not the OSX bundled ones. Without it, I can't pr
-
When I click on the icon for Safari, it takes forever to load and sometimes doesn't load at all. It just bounces in the dock and then will even stop bouncing all together without opening at all. Ichat does this to me too, where it will bounce for a w
-
Z30 BB Link Software will no longer connects via Wifi
My BBZ30 no longer connects wirelessly to the BB Link softwre, but it used to. It connects via USB okay. The Z30 also connects perfectly with my wifi router. Any suggestions would be welcomed.
-
After restoring my iPhone 4s how long should it take for it to function?
I just restored my iPhone through itunes on MacBook Pro but after the restoration the screen went black with just the apple icon on it. Should it be this way? and if so for how long? I'm hoping its just processing the info but its been a good 20 minu