Error in process chain for PCA full load
Hello everyone,
I'm trying to use a process chain in order to delete a previous full load of plan data in a cube prior to the new load (to avoid double records). The successor job in the process chain is loading a delta of actual data into the same cube (same info source).
When executing the process chain (and the included info package (full load)), the setting "Automatic loading of similar/identical requests from info cube" in the info package is not working (I have ticked "full or init, data-/infosource are the same")...
I have checked that the function itself works as I have executed the info package manually with success. So the problem is the chain somehow.
In the chain I just execute the info package as usual... so to my understanding, it should work the same way as if I executed it manually. Or am I wrong? Is some additional setting required in the chain in order to make it work?
Any ideas?
Thanks,
Fredrik
Hi Fredrik,
not all settings in infopackages work in chains in the same way they do while running the package manually. Mostly you can check that with pressing F1 on the setting. In your case, you need to add a process type for deleting the data to the chain. In your chain maintenance, look at process types and then in load processes .... There you will find the type you need.
kind regards
Siggi
Similar Messages
-
Process chain for a full load failed
Hi,
I have a process chain where load data from an InfoCube to a DSO with the following steps:
Begin
Load data: Execute an Infopackage with full load.
Update from PSA
Activate Data: Activate data of DSO.
When I execute the process chain, the step of execute InfoPackage succes, but the step of Update from PSA failed. If I saw the errors, I can see that when the infopackage finished need to Activate the data of DSO, and the status of the request is yellow and to Update from PSA need the QM status was green. What can I do? The data transfer correctly to the DSO but not is active.
Thank you very much.
PD: May be, some steps and options are not exactly like I wrote them but I'm working in Spanish and the meaning is the sameHi....
Look if Update from PSA has failed......then go the details tab in the IP monitor.........expand the failed data packet and see the error message........there may be several reasons .......try to solve that issue............ then delete the request from the target without making the QM status red.......the reconstruct the request................
Actually I am not getting you clearly....I think your process chain is fine......Are you trying to say your ODS activation also failed...........but how ODS activation will start..........the load itself failed.........Is the link is on success or failure....
Regards,
Debjani....
Edited by: Debjani Mukherjee on Oct 16, 2008 2:02 PM -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
Error in Process chain for CO-PC
Dear ALL
I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
@5C@ 0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record RSDMD 191
Thanks in AdvanceHi,
Check below these links for more business knowledge about CO-PC.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
Regards,
Praveena. -
Error while creating process chain for flat file loading
Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
MamtaHi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan -
Error in Process Chain for DTP- Job not finished
Hi Experts,
We have an issue with one of our process chains. When we execute the chain manually, there is no problem. BUt if we schedule the chain, issues arise. the last part of the chain is DTP. But the job doesnt finished even if the DTP step si already green. Locks occur for the DTP and the infoobject. When we look at the job log in SM37, it is still active. But this should not take a long time, since if we execute it manually it is ok.
Pleas help expertsGuys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Process chain for full load.
Hi,
I have developed a Process chain for delta loads. Now my question is, can we use process chain to load full load data source for master data, if yeas then what are the steps.
If we can use process chain for full load to master data then can we use delta and full load infopackages in the process chain.
Please update.Hi Sata,
You can Include both Full and Delta in the Process Chain. But make sure that you execute the Init InfoPackage manually before executing the delta InfoPackage in the Process Chain.
For Full Load Process chain, add the infopackage
>DTP for Full Load---->delete PSA data variant(after 2days) -
>attribute change run
Normally load the hierarchy first then the attribute and text.
Assign points if it helped you.
Regards,
Senoy -
Process chains for loading data to target is not functioning
Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
SoujanyaHi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Delta and Full process chain for same master data target.
Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddyHi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh -
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
Hi,
Im creating Process chain for 0notification master object, here we have 8 infopackages with different selections but im not able to use 1 DTP for all the Infopackages. so plz solve my issue
Thanks and Regards
Satish Kumar K.SHi Satish,
Not clear about your requirement.
As per your post, there are 8 infopackages with different selections.
These infopackage will load data to PSA and from PSA to data target ( say DSO ) will be loaded by DTP.
If the DTP is full load, it will load all data from PSA. If it is a delta DTP, last changed data will be loaded to target ( based on delta pointer ) . You can use single DTP to load data to target, from PSA. Number of Infopackages is not an issue.
In the process chain, use all 8 Infopackage steps in series and then use DTP. It will work fine.
Please let us know the error message you are getting.
Thanks,
Vinod.
Edited by: Vinod Sivadas on Feb 23, 2012 8:21 AM -
Error in process chain (psa data)
We have got an error in our PROCESS chain for master data.
Info object Name : 0customer
In that it was showing there was error in our request. When I wanted to correct data in the request there it was showing no error records. All the records are good and also it is showing as error in request. I have deleted the request from infoobject and also from the PSA. And the last updated good request is also showing error as No data packets available for the request .
0Customer is delta update ; Process chain is daily based.
My doubt is whether the records in the deleted requests will be reloaded again from sap R/3 into PSA, as requests during Process chain or not.
While monitoring the request details in Monitor u2013 Administrator Work bench, it shows the following:
1. Requests (messages) Everything Ok
2. Extraction (messages) Missing messages
3. Transfer (IDocs and TRFC) Missing messages
4. Processing (data Packet) No data
5. Process chains : Everything Ok.
Even after deleting the requests my process chain is not getting updated.
Kindly help me in solving the above problem
Regards
PadmaHi,
Once deleted the request, try to manually trigger the load and see whether it completes. if it completes and pulls reocrd then you can push the chain process ahead with the program RSPC_PROCESS_FINISH
Regds,
Shashank -
Error in Process chain while deleting index and create index
While executing the process chain for delete index the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
Please help me in solving this issue.
Thanks & Regards,
BharathiHi,
Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
You can also use RSBKREQUEST table to check the request and its corresponding data target.
This request is either red or yellow caused this failure.
Hope this helps.
Regards, -
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun
Maybe you are looking for
-
Export expenses and vendor invoices
Hi Gurus; We have an export scenario, we are using TA order type, and we have some conditions like freight, insurance.. but we have a problem. we don't how we can link vendor invoices with this sales order. i want to use miro to enter freight invoice
-
OC4J, Stateful Session EJB, & Session Timeout
In my J2EE applications, I have a user authentication layer whereby when the user is authenticated against our LDAP repository after logging in, a Stateful Session EJB keeps that conversational state with the client at all times until the user logs o
-
When I try and update my flash player, it downloads as a .mdlp file. How do I fix this?
-
Value property not getting updated for edit on firefox
Der Sir/Mam, I am a selenium tester and my test fails on moxila due to following issue, Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath. The test case run fine on IE. I want
-
I just changed the hard drive on my computer and my music and videos that I got from my friend will not play because I don't remember his password. Any solutions????