Error in process chain (psa data)
We have got an error in our PROCESS chain for master data.
Info object Name : 0customer
In that it was showing there was error in our request. When I wanted to correct data in the request there it was showing no error records. All the records are good and also it is showing as error in request. I have deleted the request from infoobject and also from the PSA. And the last updated good request is also showing error as No data packets available for the request .
0Customer is delta update ; Process chain is daily based.
My doubt is whether the records in the deleted requests will be reloaded again from sap R/3 into PSA, as requests during Process chain or not.
While monitoring the request details in Monitor u2013 Administrator Work bench, it shows the following:
1. Requests (messages) Everything Ok
2. Extraction (messages) Missing messages
3. Transfer (IDocs and TRFC) Missing messages
4. Processing (data Packet) No data
5. Process chains : Everything Ok.
Even after deleting the requests my process chain is not getting updated.
Kindly help me in solving the above problem
Regards
Padma
Hi,
Once deleted the request, try to manually trigger the load and see whether it completes. if it completes and pulls reocrd then you can push the chain process ahead with the program RSPC_PROCESS_FINISH
Regds,
Shashank
Similar Messages
-
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa. -
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
Authorization objects for Process chain and Data source in BW 3.x
Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
BharatHi bharat
I dont thin these objects are part of 3.0
check from SU03 weather these objects are present in 3.o box
In 7.0 they exist:
http://help.sap.com/saphelp_bw33/helpdata/en/8b/134c3b5710486be10000000a11402f/frameset.htm
TO see weather these objects exist:
Go to Tools -> Administration ->User maintenance ->Information System -> Authorization objects -> Authorization objects by Complex Selection Criteria -> By Object Class. For the object class, enter either RS (for Business Information Warehouse objects)
OR
S_BCE_68001413 (Tcode for this rep)
Thanks,
Raj -
Authorization objects for Process chain and Data sources in BW 3.x version
Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
Bharatits the same thread again
/community [original link is broken]
Thanks,
Raj -
Update from PSA error in Process Chain
I have a process chain in which I am using an InfoPackage to load data into 2 ODSs at the same time. I keep getting the following error in the 'UPDATE FROM PSA" process and the following are the messages:
-Job Started
-Step 001 started (program RSPROCESS, variant &0000000001438, user ID Z_R3USER)
-Performing check and potential update for status control table
-Specify valid date
-Job cancelled after system exception ERROR_MESSAGE
Can anyone tell me wht I can do?
Thank you for your inputHi,
I was able to resolve this problem. It was not a problem with process chain, but was something to do with the data. The values for fiscalperiod were not in the right format.
Thank you all for your inputs. -
Error in Process Chain while loading Master data text?
Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balajiHi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto -
Error in Process Chain while extracting data from source system
Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.
Maybe you are looking for
-
How do I turn off Air Drop on my MacBook Pro?
Realy don't like the idea of my MacBook being available to people around me.
-
Add effects (rounded corners) to an embedded HTML video frame?
Is possible to add effects (rounded corners) to an embedded HTML video frame?
-
How do you install ARC 4.4 into LR 1.3.1? Thanks, Bruce
-
How to use GUI_UPLAOD?
Hello, I am working on CRM2007 version of CRM. I have an excel file with just one column that has phone numbers. I want to upload these phone numbers into an internal table. I am trying to use GUI Upload in the following way call function 'GUI_UPLOAD
-
8300 won't turn on after desktop manager problems
I tried to install the Blackberry Desktop manager here and during installation my usb connection became undone between the computer and the phone. I was able to make it halfway through setup to where I have an IPD file of my backup information. I j