Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris Gokul
Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun
Similar Messages
-
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
-
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa. -
When attempting to use Facetime, i get the message "the server encountered an error in processing registration. Please try again later." What does this mean and how do i fix it. I've tried "later" many times.
Hello Mikeytsmith
Check out the article below for troubleshooting the issue of activating FaceTime for Mac.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Infopackage deleted - error in process chain
Helle experts,
I have a problem in process chain.
Today the log advices an error because an Infopackage (that is used in the chain) was deleted yesterday; in fact, in the chain there is an other name for the Infopackage (first question: is this automatically generated?).
It seems that none deleted it.
Can you help me, please?
It's urgent
I think that the problem can be resolved with the creation of a new Infopackage with the same features of the precedent, but I don't understand the cause of the problem.
Thanks,
regards, VitoHi,
you can check in the log what went wrong for this InfoPackage: transaction SLG1, object RSSM, subobject SDL, external ID = *.
What kind of name do you have in your chain? Is it a generated name or a name one of you typed for the IPack.
In a chain some of the packages are generated automatically depending on the process you drag in your chain.
Creating a new IPack with the same name would work I think, if the package in your chain is not a generated one. If it is a generated IPack, then create a new IPack and drag it in your chain.
Hope this helps,
Olivier. -
Error in process chain :hierarchy
Hi,
I am working in BI 7.0..i am getting the following error in DTP Process of process chain
Error Message:Node ID 1 occurs more than once in the hierarchy table.
Please guide me how to solve.
Regards,
Visali.GHi Vaisali,
Your question is not clear, can you please tell us at what level the you are getting this perticular error in the Process chain.
To the extent that i understood is that when you try to put the DTP while you create the process chain.
If this is correct then i feel like that you are trying to insert the same DTP twice in creation of the process chain.
And more over change the display to Graphical mode rather that the Netwok mode while you display the Process chain in RSPC T-code.
Best Regards,
VNK. -
Error in process chain activation
HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanksHi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps... -
Error in process chain variant when executing BI IP planning sequence
Hi All,
I am trying to execute a planning sequnce as a background job using a process chain. Here one of the variant failed giving an error as : Overflow occurred when calculating <Key figure name> with value 6.5231044352058409E18+.
I tried executing that process chain variant separately using the ABAP program RSPLS_PLSEQ_EXECUTE as a background job, but still its not working.
At last I tried executing the individual planning step in the planning modeler, but again the same error.
Earlier such case was resolved by compressing the planning cube requests and executing the failed variant using the ABAP program, but this time even compression is not helping to solve this.
Can anyone please help on this issue ?Hi Andrey,
This Key figure is created of the data type CURR (Stored as decimal) for Amount type. Now the length of CURR is maintained by SAP as 17 with 2 decimal places, so do you mean that I have to switch to other data type to hold the large value that is getting generated.
My concern is : the error is coming for just one of the variant of the chain and not for other variants. If it has something to do with the KF data type, then certainly all others variants must have thrown the same error. -
Error in Process Chain while extracting data from source system
Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.
Maybe you are looking for
-
Can't log into itunes on my iphone 5s
okay so , i have problem with i cloud and i reset my network then it worked but i stil can't download any application from i tunes and i tried to log out and log in again but i can't log in anymore and i don't know why , i need help , thanks in advan
-
Sync "smart playlist" without song-titles?
Is it possible to synchronize only a smart playlist without all the song-titles what are included? A example; In i Tunes i have a very large song library on my mac. Then i have synchronized some titles, with "Check Selection" mode. Now i have a "Smar
-
I have a form page (jsp/html) that has a number of fields and the results are finally stored in a table(oracle). In the same page I am planning to include a field that populate the data from another table and when I select and submit, those values sh
-
hi i have table and data like below.. CREATE TABLE HEIGHT (FEET NUMBER(2), INCH NUMBER(2), NAME VARCHAR2(6)); INSERT INTO HEIGHT VALUES(3,1,'JOHN'); INSERT INTO HEIGHT VALUES(3,7,'SMITH'); INSERT INTO HEIGHT VALUES(3,0,'MILLER'); INSERT INTO HEIGHT V
-
Best practise to versioning Web Service WCF
I've a web service SOAP developed with WCF, there is a best practise to versioning it? when I change the contract I don't want to update all the client's referiments but I want simply publish a new version that coexists with the old. STUDY-CASE: I've