Error in Process Chains

Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
Amit

Hi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@     Errors in source system     @35@
3. @5C@     Error 1 when loading external data     @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you

Similar Messages

I am getting an error in process chain in bw 3.5?

Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
pooja

Hi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

Error in Process chain( Urgent Please )

error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris Gokul

Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun

Error in process chain pushing step

Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...

Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat...

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Errors in process chain

hello gurus,
what are regular errors in process chain during data loads?

Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa.

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

BW: Not getting Dump For Program error in Process Chain

I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.

Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM

Data load Error using Process chain

Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
Param

Hi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep

Error in process Chain

Hi all,
When I am executing a process chain just for loading a DSO( process types used are : Start process-->DTP processtype --> Activation procss type ) it is showing the following error in monitor of that particular DSO.
" Cannot perform frontend function in batch input mode " .
Kindly help me with your inputs....
Regards
KK

Are you using BI7.0 data flow? (or) are u using 3.5 data flow? I think if you are loading using transformations..
you have to load to PSA using infopack and then DTP to load till DSO..
If you are using 3.5 data flow, i think you can do what ever u mentioned...
But let us hear more from the BI 7.0 experts..
regards,
Srini

Error in process chain :hierarchy

Hi,
I am working in BI 7.0..i am getting the following error in DTP Process of process chain
Error Message:Node ID 1 occurs more than once in the hierarchy table.
Please guide me how to solve.
Regards,
Visali.G

Hi Vaisali,
Your question is not clear, can you please tell us at what level the you are getting this perticular error in the Process chain.
To the extent that i understood is that when you try to put the DTP while you create the process chain.
If this is correct then i feel like that you are trying to insert the same DTP twice in creation of the process chain.
And more over change the display to Graphical mode rather that the Netwok mode while you display the Process chain in RSPC T-code.
Best Regards,
VNK.

Error in Process chain creation

Hi All,
My dataflow is:
R/3---ODS--Cube.
R/3 to ODS is Daily Load
ODS to cube is Monthly Load.
I am planning to create 2 process chains.
One I did from R/3 to ODS with following Processes.( This Chain Is OK)
Start----Execute ODS Infopackage--
ODS Activation.
Second One with (Error)
Start-----Further Processing--Delete IndexLoad Data--Create Index.
When I click on Checking View I am getting Red mark on Load data Process.
WHen I take Further Process as variant It proposed Activation of DSO process Again, I removed that process.
Details of the eRROR IS: Infopackage ZPAK_**is generated, Not able to be used as Loading variant.
Can ANy body help me on this and what could be the best way to create chain for this flow.
Regards,
Madhu

Hi Friend,
Q. Second One with (Error)
Start-----Further Processing--Delete IndexLoad Data--Create Index.
A. The Flow should be :
Start - > Delete Index for Cube - > Load Data (IP to load from ODS to Cube) - > Create Index for Cube.
Hope this helps.
Regards
Hemant Khemani

Error in process chain activation

HI
I am learning on 3.0b,(on my pc) while using process chains, at the time of activating the process chain it is giving the following error "JOB BI_PROCESS_PSAPROCESS COULD NOT BE SCHEDULED, TERMINATION WITH RETURN CODE 8". Why am getting this error, is there anything wrong with my system or software or there any mistake in activating process chain" (what ever may be the process type i use, i am getting this error), plz help me.
thanks

Hi Ganesh,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...

Error in process chain variant when executing BI IP planning sequence

Hi All,
I am trying to execute a planning sequnce as a background job using a process chain. Here one of the variant failed giving an error as : Overflow occurred when calculating <Key figure name> with value 6.5231044352058409E18+.
I tried executing that process chain variant separately using the ABAP program RSPLS_PLSEQ_EXECUTE as a background job, but still its not working.
At last I tried executing the individual planning step in the planning modeler, but again the same error.
Earlier such case was resolved by compressing the planning cube requests and executing the failed variant using the ABAP program, but this time even compression is not helping to solve this.
Can anyone please help on this issue ?

Hi Andrey,
This Key figure is created of the data type CURR (Stored as decimal) for Amount type. Now the length of CURR is maintained by SAP as 17 with 2 decimal places, so do you mean that I have to switch to other data type to hold the large value that is getting generated.
My concern is : the error is coming for just one of the variant of the chain and not for other variants. If it has something to do with the KF data type, then certainly all others variants must have thrown the same error.

Error in process chain (psa data)

We have got an error in our PROCESS chain for master data.
Info object Name : 0customer
In that it was showing there was error in our request. When I wanted to correct data in the request there it was showing no error records. All the records are good and also it is showing as error in request. I have deleted the request from infoobject and also from the PSA. And the last updated good request is also showing error as No data packets available for the request .
0Customer is delta update ; Process chain is daily based.
My doubt is whether the records in the deleted requests will be reloaded again from sap R/3 into PSA, as requests during Process chain or not.
While monitoring the request details in Monitor u2013 Administrator Work bench, it shows the following:
1.     Requests (messages) Everything Ok
2.     Extraction (messages) Missing messages
3.     Transfer (IDocs and TRFC) Missing messages
4.     Processing (data Packet) No data
5.     Process chains : Everything Ok.
Even after deleting the requests my process chain is not getting updated.
Kindly help me in solving the above problem
Regards
Padma

Hi,
Once deleted the request, try to manually trigger the load and see whether it completes. if it completes and pulls reocrd then you can push the chain process ahead with the program RSPC_PROCESS_FINISH
Regds,
Shashank

Error in Process Chains

Similar Messages

Maybe you are looking for