Error in PSA manage - '& error in PSA'

Hi,
I am receiving error in while selecting data at PSA. The data in PSA is loaded successfully. It can be seen at the table level.
However whenever I click on PSA button , I receive error.
The error received is '&'.
I tried to search the description of error '&'. However I am unable to see the text.
Kindly help.
Thanks in advance,
Mrugali

Hi Amol,
Thanks for the quick reply.
Even I am loading data through flat file which contains Date in mm/dd/yyyy format.
I ve changed the format and it is working now.
I ve rewarded points.
Regards,
Mrugali.

Similar Messages

2960 switch SNMP packet errors vs Device Manager Errors

So we use the 2960 switches and monitor the in and out packet errors with snmp. The numbers are not the same in the device manager as the numbers we get from snmp. does anyone know a reason why this would be?

SSL3.0 is disabled in A5(3.1b) and A5(3.2) A5(3.1b) was released in late November 2014 and A5(3.2) was released in April 2015
https://software.cisco.com/download/release.html?mdfid=281222179&flowid=151&softwareid=282775307&release=A5(3.1b)&relind=AVAILABLE&rellifecycle=&reltype=latest

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Intern ipod-manager error

I cannot update or restore. I tried everything, i even thought it might be the harddisk that went dead but thats not it.
When i open ipodupdater it gives me that error:
intern ipod-manager error..
does anyone know how im able to fix this?

http://docs.info.apple.com/article.html?artnum=301907

ICM 7.2: Error with Domain Manager

Hi all,
When I run the Domain Manager to add more instances to my ICM, it returns an error:
ICM Domain Manager Error
Error updating the member of SQLUser and WVScript groups.
Please help me on this.
Thanh

Hello, Thanh.
You may be running into known defect CSCsk02930, which is fixed in 7.5.
The published workaround is to just dismiss the error message and continue -- nothing is actually failing.
Can you try that?
For more details, please check the full bug report via the online Bug Toolkit:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
-Paulo

PSA level Errors are not displayed

Hi friends,
    I'm using BI 7.0....up to PSA i'm getting data perfectly.. Even though some errors are there i mean.. data mis match in my flatfile(for NUMC fields I was enterd Charecter data... ... that time also.. psa level data was showing green only.... if i upload into ODS then only i'm getting problem..
      but   in previous versions it was showing Red (for error reacords..) in PSA level itself...
     for what reason I'm not getting like this.... is there any problem with my procedure.. or   is this BI 7.0 feature..
plz clarrify..
Thanks
babu

Hi,
    Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control the behavior of the BI system if data records with errors occur in the data flow with 3.x objects (use of transfer and update rules) when you are loading data using the PSA.
The system checks for data records with errors:
      in the transfer rules
      in the update rules
      when data is updated to the master data tables, text tables, or hierarchy tables
      when data is updated to the InfoCube
      when checking for referential integrity within an InfoObject against the master data tables or DataStore objects on the communication structure level.
Features
Incorrect records arising in transfer rules, update rules, when updating to a data target, or when checking for referential integrity, are highlighted and returned to the error handler. The error handler locates the original PSA records and writes the corresponding log. This function is not yet available for updating to DataStore objects.
Using the Error Handling function on the Update Parameters tab page in the scheduler, you can control how the system responds to incorrect data records.
Activities
       1.      Define how the system should react to incorrect data records
a.       No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.       Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.       Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
With option a), the incorrect records are marked in red in the PSA maintenance. You can display the relevant error messages amodally, edit the records, and update the request manually. If it was not possible to write to the PSA (hierarchy or transfer method IDoc), an application log is written instead.
With options b) and c), a new request that is only updated to the PSA is formed from the incorrect records. Here you can edit the records of the new request in the PSA and start the update manually.
If errors arise when an InfoCube is updated, new requests are generated for incorrect records for each InfoCube combination. Among these requests, the incorrect records are updated to the PSA. These new requests have entered as data targets the InfoCubes for which there were incorrect records. If, for example, a record was updated to two InfoCubes by mistake, a request is generated for this record that contains both InfoCubes as data targets. In the PSA tree, the requests appear as successfully updated in the PSA. These new requests can then be triggered again for updating to the InfoCubes.
       2.      Specify the maximum number of incorrect data records that are allowed before the system terminates the load process. In the PSA, you can display the errors that have arisen up to that point. If you do not specify the maximum number of incorrect records after which termination should occur, the handling of incorrect data records is inactive and the update terminates after the first error.
       3.      Define how the BI system should react if the number of data records received by the BI system is not the same as the number of data records updated in BI.
A difference between the number of received and updated records can occur:
         in the transfer rules
         in the update rules
         when updating
Records are sorted, aggregated, or added.
If you set the No Aggregation Permitted indicator, the request is deemed incorrect if the number of received records is not the same as the number of updated records.
Regardless of this indicator, an error occurs if the number of selected records is not the same as the number of records received in the BI system.
Result
The monitor directs the user to the relevant error case and enables a direct navigation into the PSA or the respective error request.
If you want to continue processing the incorrect data records in a program that you have written yourself, you can use the method GET_ERRORS of class CL_RSSM_ERROR_HANDLER. The use of this method is documented in the RS_ERRORLOG_EXAMPLE.
More Information:
Checking and Changing Data Using the PSA APIs
To perform complex checks on data records, or to carry out specific changes to data records regularly, you can use delivered function modules (PSA-APIs) to program against a PSA table.
If you want to execute data validation with program support, select Tools ® ABAP Workbench ® Development ® ABAP Editor and create a program.
If you use transfer routines or update routines it may be necessary to read data in the PSA table afterwards.
Employee bonuses are loaded into an InfoCube and sales figures for employees are loaded into a PSA table. If an employees bonus is to be calculated in a routine in the transformation, in accordance with his/her sales, the sales must be read from the PSA table.
Procedure
       1.      Call up the function module RSSM_API_REQUEST_GET to get a list of requests with request ID for a particular InfoSource of a particular type. You have the option of restricting request output using a time restriction and/or the transfer method.
You must know the request ID, as the request ID is the key that makes managing data records in the PSA possible.
       2.      With the request information received so far, and with the help of the function module, you can
         read RSAR_ODS_API_GET data records from the PSA table
         write RSAR_ODS_API_PUT changed data records in the PSA table.
RSAR_ODS_API_GET
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
Result
The corrected data is now available for continued updates.
if it helps plz assign points

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error While loading the data into PSA

Hi Experts,
       I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created       YOKYY on   20.02.2008   12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.

Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error in rules while updating from PSA to ODS

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Hi Kazmi:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Short text
    Error when attempting to IMPORT object "HIST2".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RSORAT4M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "AKT_DAY_HIST2" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "HIST2", the component no. 8 in the
    dataset has a different type from the corresponding component
    of the target object in the program "RSORAT4M".
    The data type is "I" in the dataset, but "P" in the program.
How to correct the error
    Try to find out why the type of the object should be different.
    There are various possible options:
    1. The type of the imported field has changed in the Data Dictionary.
       Make sure that the type of the imported field matches the type
       of the field in the Data Dictionary.
       If the data cannot be restored from another source, the data must be
       read by the 'old' structure, converted und again eported with the new
       structure, so that future IMPORTs will always function with the new
       structure.
    2. A new program version is active, which no longer fits the dataset.
       Try to solve the error generating the program "RSORAT4M" again. This
       works as follows: Select transaction SE38 in the SAP system. Enter
       the program name "RSORAT4M". Then activate the function 'Generate'.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONNE_IMPORT_WRONG_COMP_TYPE" "CX_SY_IMPORT_MISMATCH_ERROR"
"RSORAT4M" or "RSORAT4M"
"AKT_DAY_HIST2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught wit
"AKT_DAY_HIST2" "(FORM)", or its possible occurren
RAISING clause of the procedure.
Hope this helps.
Thanks to you and all
Raj

Psa data error

hi
while trying to load data to infocube ..i am getting errors .it is showing errors in PSA undefined characteristics found for the characteristic 0incoterms..it is entered as hamm.
in place of hammenburg. how to correct the record.
not only hamm all the characteristics in 0incoterm are found error.
it is giving the messagehexadecimal characteristic found in the 0incoterm field..
please tell the solution

Hi,
There are 2 basic solutions
1. In the maintenance screen of the infoobject, click the checkbox for lower case letters
2. using transaction RSKC you can enter the unpermitted characters.
3. Also Unpermited char can be made permited by tcode RSRV
4. you can correct the data manually in PSA or write logic to correct the data in update rule
reward if you find it useful
regards,
Naveen

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Server Manager error 0x80070422 - Roles and features are not accesible

Hi
I cannot view Roles and Features in Server Manager on my Server 2008 R2 box. The error is:
Unexpected error refreshing Server Manager: The service cannot be started, either because it is disbaled or because it has no enabled devices assicaited with it (Exception from HResult: 0x80070422)
I have looked at my services - but don't know what service to look for, everything seems to be in order.
After some investigation on the net, I understood that I need to setup the win readiness tool, I did and the output in CheckSur file is as follows
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 12.0
2011-05-31 19:02
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual
file name
(fix) CBS MUM Corrupt CBS File Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
(fix) CBS Paired File CBS File also Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 4058
Found 1 errors
Fixed 1 errors
CBS MUM Corrupt Total count: 1
Fixed: CBS MUM Corrupt. Total count: 1
Fixed: CBS Paired File. Total count: 1
Here again, it seems that everything is fine.
Thanks in advance for your help

Hi,
Please try to install Windows Server 2008 R2 Service Pack 1 directly and check the result. Service Pack 1 for Windows Server 2008 R2 includes all the
previous released Windows Updates and hotfixes.
If it does not work, you will need to copy these files from another working Windows Server 2008 R2 system to replace the corrupt ones.
Otherwise, you will need to perform an In-Place upgrade to repair the system.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Log On to null and Plugin Manager error

After installing BOE XI 3.1 Update and SAP Integration Kit 3.1, when attempting to log on to InfoView get a Log On to null showing up in the upper corner and when attempting to use SAP Authentication get:
Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)
SAP Authentication doesn't show up in CMC either. Any ideas? Already checked SAP Java Connector.

Here is the "README":
wdeploy: Business Objects Deployment tool
Objective: To deploy Business Objects web applications.
Location of online deployment guides:
BusinessObjects Enterprise XI 3.1 Web Application Deployment Guide for Windows
BusinessObjects Enterprise XI 3.1 Web Application Deployment Guide for UNIX
1. Go to http://help.sap.com
2. Click on tab "Business Objects"
Please note that you will need your SAP Service Marketplace USER ID and PASSWORD to access this material.
If you do not have the necessary credentials contact your SAP support center.

Error in PSA manage - '& error in PSA'

Similar Messages

Maybe you are looking for