Error in RE contract

Hello Experts,
We are facing an eror in RE contract profit center determination.
We have reviewed the earlier posts on profit center determination, however for us we are unable to save the contract.
While creating contract:
Contract level no profit center
RU1 : PC1
RU2 : PC 2
Cannot save contract due to error. Error: RETMFI019. Unable to determine exact profit center.
Suggestions please.
Regards
Veena

Hi Veena,
if the profit center is not entered directly for the contract the system tries to determine it by the assigned objects.
In your example it is impossible for the system to derive the PC automatically.
While creating contract:
Contract level no profit center
RU1 : PC1
RU2 : PC 2
Which PC should be used (PC1 or PC2)? As this cannot be determined automatically you have to enter the profit center manually in the contract posting parameters.
Regards, Franz

Similar Messages

  • Error in posting contract for interest rate futures with product type 70B

    Hi All,
    I am getting the below error while creating contract(FTR_CREATE) for interest rate futures with product type 70B.
    Processing leads to inconsistent positions for 11.02.2014  CoCd:LT01 ValArea:001 ValCls:0001  IDNo:IRF021 Fut.Act:CITI001
    Message no. TPM_TRL063
    Diagnosis
    An error exists in the derived flows. Further processing would lead to inconsistent positions for 11.02.2014 .
    CoCd:LT01 ValArea:001 ValCls:0001  IDNo:IRF021 Fut.Act:CITI001
    System Response
    Processing was terminated.
    Kindly Suggest.
    Regards,
    Anish

    Thank u for ur response.Now it is solved when OB40 and OBCN maintained.Here I am facing a new problem.pl. provide the solution.we configured twoseperate  pricing procedures for our product and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain  seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
    now I am facing the following problems.
    1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for  product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
    2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of  ZVAT/ZCST.
    Now I would like to know is there any procedure  to assign the Material type and Customer group to Tax category.
    Thanks & Regards
    sam

  • I have been using iTunes for years to connect to radio and just recently tried to get on and sign pops up stating " A error occurred while contracting the radio tuning service. Check your internet connection or try again later "  I do but the same respons

    I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?

    You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes.  No, Apple makes no comment about this kind of thing.  It may reappear, it may not (it has been dead for over a week now).  Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without.  You can still open streams if you can get the URL, and you can then save them as playlist items.

  • Error while creating contract

    Hi Experts,
    I am getting a strange error,while creating quantity contract in VA41 .
    When ever I am trying to save the quantity contract it gives a in completion Log.
    So when I am trying to complete the documents it gives a list of incomplete fields,in those fields I see a field called Net value so when I am clicking on the field its taking me "condition" tab and under that to pricing elements .
    I have assigned pricing procedure to sales org.
    I am not able to understand how to proceed since incomplete doc would not get saved.
    Pls help .

    This is because the cost pricing for EK01 is missing. In t.code V/08, go to pricing procedure. In the pricing procedure, the pricing condition type is ticked as mandatory, hence you see the details in the imcompletion log. For details on cost using EK01, there are plenty of threads in the forum available. Just search, for example Re: Contion Type Line Items:EK01
    Regards,

  • Error while creating contract wrt pr

    hi
    i am creating a pr for cotract, via me51n..selecting outline agr req..then creating pr for a raw material...
    i m releasing this pr in 54n...now i go to 31k...i select wrt pr....now when i give my pr no. i get this error message
    "Requisition doc. type RV not allowed with doc. type"
    i have tried a whole day with different material types...always getting same error msg....
    plz  throw some light on this issue, if u can..
    help appreciated
    regards
    rahul

    SPRO>Materials Management>Purchasing>Contract>Define Document Types
    Here you select your document type and select link to purchase requisation.You can which document typease are assigned.If your entry missed add your PR document type.

  • Error while creating contract type 0002

    Hiya
    While trying to create purchasing side contract, i am getting an error as below
    No sales prices possible at plant level for distribution chain S001/01
    Message no. WV228
    Diagnosis
    For distribution chain S001/01, in the distribution chain control parameters in Customizing, the "distribution chain pricing level" indicator does not allow plant level as an allowed pricing level below the distribution chain. Plant level must be allowed as a pricing level before you can calculate plant-specific sales prices in sales price calculations.
    System response
    Sales prices cannot be calculated for items containing plants belonging to distribution chain S001/01.
    Procedure
    Make sure you really want to calculate sales prices at plant level. If not, remove the plant(s) concerned.
    If you want to calculate plant-specific sales prices for distribution chain S001/01, change the Customizing settings accordingly.
    Make any necessary Customizing settings if you have the required authorization.
    Contact your system administrator if you cannot make the settingsyourself.
    Any help is appriciated
    Regards

    Hi Vijay
    Thanks for the input, the issue got solved, however i got stuck ahead with another error. it is as belo
    No basic purchase price relevant to pricing found with schema RM0000
    Message no. WV185
    Diagnosis
    There is no condition record flagged as relevant to pricing in the master conditions defined for the basic purchase price.
    Procedure
    Check in Customizing (price determination, Purchasing) whether the condition types that are used as gross price or promotion price (these are PB00, PBXX and PA00 in the standard system) are flagged as relevant to pricing. Set this flag if you wish new condition records to be saved as relevant to pricing in future. If you wish to flag existing condition records as "relevant to pricing" in retrospect, use report RWVKP01U.
    This seems to be from MM side, however if you have any idea please suggest
    Regards
    Ranjeet

  • Error while creating contract type 0002 [Purchase side]

    Hiya
    While creating a purchase side contract vide tcode wb21 i am getting following error
    No basic purchase price relevant to pricing found with schema RM0000
    Message no. WV185
    Diagnosis
    There is no condition record flagged as relevant to pricing in the master conditions defined for the basic purchase price.
    Procedure
    Check in Customizing (price determination, Purchasing) whether the condition types that are used as gross price or promotion price (these are PB00, PBXX and PA00 in the standard system) are flagged as relevant to pricing. Set this flag if you wish new condition records to be saved as relevant to pricing in future. If you wish to flag existing condition records as "relevant to pricing" in retrospect, use report RWVKP01U.
    Kindly help
    Regards
    Ranjeet

    Closing...

  • Error in Releasing Contracts in SRM-Error Log for user WF-BATCH

    Hi,
    When we are releasing contracts in SRM, an error log is being generated for a user WF-BATCH with message :
    "Recipient not found
    The error ocurred by processing event RELEASED_NEWLY with GUID 4530EA86C23B007700000000B0000023 and object_id= 4400000238"(Where 4400000238 is our contract no)
    Also our contract is not being transported to CCM even though all the relevant configurations have been done in XI.
    Is this because of the error log?? What is the issue??
    Any Useful answers would be suitably rewarded..
    Regards,
    Puneet

    Hello Puneet,
    Please check whether u have released that contract or not.
    if u need to release purchase order from the contract, it needs to be released first.
    from ur problme statement, it seems u haven't released that contract.
    Sarabjeet

  • Error in Quantity Contract

    Hi Experts,
    I have created a quantity contract in VA41 and with that reference I am creating now a sales order. But while saving I am getting error "The Customer Requires Complete Delivery: Item XXXX has not been confirmedu201D
    Message number: V1293.
    I have checked in customer master" complete delivery reqd. by law" is de activated and "Partial delivery per item " blank.
    In sales order also its blank.
    Plz need help urgent

    Dear Sap_Ritu,
    The order quantity is 20 and the stock quantity is 50.Still the prob persist
    You may check one thing.
    Please check whether the material under dispute has some stock reservations againsts open orders or deliveries.
    Maybe the 50 has been assigned to some orders/deliveries created before, but not yet completely processed.
    Thanks & Regards,
    Hegal K Charles

  • Error while deleting contract line item

    Hi All,
    In ME32K when I try to delete the line item of the contract it goes to runtime error. Pls help me why I get that error.
    It has 3 PO`s created in 2010.

    Error analysis
    A RAISE statement in the program "CL_HANDLE_MANAGER_MM==========CP" raised the
    exception
    condition "FAILURE".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "RAISE_EXCEPTION" C
    "CL_HANDLE_MANAGER_MM==========CP" or "CL_HANDLE_MANAGER_MM==========CM005"
    "GET"

  • ERROR IN SUB CONTRACTING

    Hi frnds,
                         im facing a error while im posting the quantity reconciliation for sub contracting challan..

    error is that "challan not valid, material docuement is valid for another scenario".
    we sent the material outside for sub contracting and now we received the deliverable goods from vendor, so we posted the goods receipt. but while reconciliating the error is coming........
    every thing is perferct that maintained the posting dates, movement types.
    thanks in advance

  • GL account doesnt exist in company code-error in Sub contracting PO.

    While doing GR for the sub contracting PO, I am getting this error for line item 4:  GL account 490237 is doesnot exist in company code 0600.
    3 line items are already recieved to the GL account 490223 which is correct.
    for 4 th line item when i am going to do the GR the above error is occuring,
    I have checked the FRL setting for Valuation grouping code VB01 with 490237; it should be acually 490223.
    Where can I see the changes relevant to that, all of a sudden GR is asking for the new GL account than the one which use to posted earlier? Pls help me experts.
    Thanks
    Sri

    The correct G/L account is 490223, so far posted with. what changes went to production I dont know
    Valuation grouping code in obyc is VB01 490237 (at present for FRL)
                                                            VB02 490223 (at present fro FRL).
    due to which all of a sudden its looking for 490237 which is not correct.
    after our EHP5, is this got changed to vice versa?
    Thanks
    Sri

  • Error IN SRM CONTRACT Creation

    Hi,
    When i am executing the fucntion module 'BBP_PD_CTR_CREATE', it is showing the error 'Incorrect Interface Data for set 78 in method C'. What could be the problem?
    Please help.

    Hi
      In ECC, When you procure services, system expects you to put a Account assignment category . So when you are creating a contract for a service(item category D), you either specify the account assignment details in the Contract. If you dont have one right now, configure Account Assignment Category U(Unknown) in SRM and map it to ECC Account Assignment Category U.
    On using U as account assignment category you will not be required to enter other account assignment details in the contract,
    Setting up Unknown account assignment can be done as follows:
    1. Create Account Assignment Configuration in ECC which you have already completed.
    2. On the IMG Path in SRM: Path:IMG --> SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Account Assignment --> Define Account Assignment Categories:
    a. Create SRM Account Assignment Category and map it to the respective Backend Category.
    3. Assign the new account assignment category in the Attribute KNT in SRM Org Structure
    After that user will be able to select that category in the SRM Application DOcuments
    Regards
    Virender Singh

  • MIGO Error against SUB-Contract LB031

    Hi Expert,
    i have a Sub-contract scenario, both material and component under this material are managed with HU.
    step is:
    1. Create a sub-contract PO ME21N
    2. Create a delivery to Vendor for this component via ME2O
    3. G/R against this sub-contract PO MIGO
    4. Create a TO against the inbound Delivery Note which create in Step 3 LT0F;
    5. Confirm TO LT11;
    6. Post good receipt against Delivery note which create in Step 3 VL32N
    then there is a error message "Of the required quantity of material H000003786, 2.000 EA remain(s) open
    Message no. LB031"
    I checked there is enough component stock under vendor in MMBE.
    Can anybody help me?
    Much appreciate.
    Rocky

    Hi All,
    Thanks for your reply.
    +"what is the PO quantity? what is the receipt quantity? is H000003786 the material you ordered or the material that is consumed?
    what is the percentage of this material in your BOM if it is the component?"
    PO is 5000EA, and receipt quantity is 1 EA.
    BOM structure is:
         1EA  F0000007677 map 1EA H000003786 (Include 2% component scrap)
    So 1 EA F00007677 G/R requires 2 EA H0000003786. And i need to backflush 2EA H0000003786.
    You are talking about PGI and saying you have created TO in LT0F !! (which is for inbound delivery Putaway) !! Iam asking you to create a TO in LT03 and confirm. How do you issue your goods in IM? You have to create and confirm the TO for the same transaction. Pls be clear and revert.
    When i do G/R, only Inbound Delivery note is generated, so i can only to create TO via LT0F. How can i create outbound Delivery Note during MIGO transaction?
    Thank
    Rocky

  • 'Administration item could not be processed' error in Sales Contract

    Hello,
    When I try to create a sales contract in CRM 5.0, I get the following error message:
    Administration item could not be processed 46760D4DB17003F4E10000000A350350
    Message no. CRM_ORDERADM_I001
    Does anybody know how to solve this?
    Thanks,
    Jeroen

    Hi Jeroen,
    Pls check if you have implemented any exit.
    This could be when you try to access any item level data in exit(Badi's)
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

Maybe you are looking for