Error in retraction program

when trying to retract information from BIW to Funds Management, what does the following error mean:
Source type \CLASS=CL_ABAP_ELEMDESCR is not compatible, for the purposes of assignment, with target type \CLASS=CL_ABAP_STRUCTDESCR
Message no. RS_EXCEPTION000.

Look at SAP NOTE : 1108424 , 701941
This is similar to your error ..
Symptom
You are using an application in CRM release 2007 and on a view that uses a table (thtmlb:tableView or thtmlb:cellerator) you get an exception:
Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_ABAP_TABLEDESCR is not compatible, for the purposes of assignment, with target type \CLASS=CL_ABAP_ELEMDESCR.
Method: CL_THTMLB_CELLERATOR=>GET_TABLE_COMPONENTS.
Reason and Prerequisites
The reason for this dump is that the table is defined without any column definitions, neither via the corresponding tag parameter nor via an iterator class. In this case the thtmlb:cellerator tag tries to get the columns from the table assigned to the tags table attribute. If this contains deep structures or tables the dump occurs

Similar Messages

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
    ABAP.
        DATA: ref_it_tab TYPE REF TO data,
              ref_wa TYPE REF TO data.
        FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
        FIELD-SYMBOLS: <fs_wa> TYPE ANY.
        FIELD-SYMBOLS: <fs_field> TYPE ANY.
        CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
        ASSIGN ref_it_tab->* TO <fs_itab>.
        SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
        CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
        ASSIGN ref_wa->* TO <fs_wa>.
        loop at <fs_itab> assigning <fs_wa>.
            assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
            V_CLIENT = <fs_field>.
            assign component 'C0' of structure <fs_wa> to <fs_field>.
            V_C0 = <fs_field>.
            assign component 'C1' of structure <fs_wa> to <fs_field>.
            V_C1 = <fs_field>.
            assign component 'C2' of structure <fs_wa> to <fs_field>.
            V_C2 = <fs_field>.
            assign component 'C3' of structure <fs_wa> to <fs_field>.
            V_C3 = <fs_field>.
            assign component 'C4' of structure <fs_wa> to <fs_field>.
            V_C4 = <fs_field>.
            assign component 'C5' of structure <fs_wa> to <fs_field>.
            V_C5 = <fs_field>.
            assign component 'C6' of structure <fs_wa> to <fs_field>.
            V_C6 = <fs_field>.
            assign component 'C7' of structure <fs_wa> to <fs_field>.
            V_C7 = <fs_field>.
            assign component 'C8' of structure <fs_wa> to <fs_field>.
            V_C8 = <fs_field>.
            assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
            V_MESSAGE_ID = <fs_field>.
            assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
            V_TIMESTAMP = <fs_field>.
            assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
            V_EXTRACTKEY = <fs_field>.
            assign component 'STATEID' of structure <fs_wa> to <fs_field>.
            V_STATEID = <fs_field>.
            assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
            V_DEVICE_ID = <fs_field>.
        ENDLOOP.
    ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

Runtime Error in MMBE- s yntax error occurred in program "SAPLMBBS " in inc

Hi Gurus,
Runtime Error in "MMBE" Transaction -
The following syntax error occurred in program "SAPLMBBS " in include "LMBBSU07
" in
line 76:
"The column name "MATNR" has two meanings . ."
Any Input is Highly appreciated.
Thanks and Regards,
Selva

Hi,
This looks like an ABAP runtime error and the program concerned is a standard program. Please check the include and try debugging, suggest a breakpoint in line 76.
Thanks

Error Your browser/program is not supported by Web Dynpro

Hi,
1. I am getting error "Your browser/program is not supported by Web Dynpro" while executing Web dynpro java application
2. Portal is EP 7.0 with SP15
3. Browser is IE 8.0
4. Which browser(s) (& sp level) are supported by web dynpro?
5. Is it possible to customize this error message?
6. If so, from where (Web dynpro java application or Visual Admin)
7. My web dynpro application supports multiple languages.
8. Is it possible to maintain this message in messagecomponent.xlf file
Thanks & regards,
Nilesh

Hi Nilesh
IE8 and IE7 is not supported.
For browser/program is not supported by Web Dynpro----
check this forums link
/message/6416540#6416540 [original link is broken]
/message/2842083#2842083 [original link is broken]
Re: browser/program is not supported by Web Dynpro!
Hope this link information will help you
Regards
Ruturaj

Error while running Program YL_ADJUST_COMMITMENT

Error while running Program YL_ADJUST_COMMITMENT, i think it actually comes from FN8C business operation for single posting w
"Message" - No account refernce could be found - Error in update to Accounting - Distribution error -CoCd 601.
Please help

Resolved my self

Error while executing program

Hi ,In sap bods, im using abap dataflow as my source and target is flat files ,while im executing its showing error
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/zcustdim.aba> error <    Open File Error"
how can i solve this problem,
Moderator message: please have a look in the forums for Business Objects.
Edited by: Thomas Zloch on Mar 8, 2012

Prem,
Looking at the error that you have shown, looks like its a different error. Is there a control/GRID that is being used in the program.
If you are using a CUSTOM CONTAINER and a GRID to display the data, whenever you executing the program, you should not create the container. Something like this ..
    if cl_gui_alv_grid=>offline( ) is initial.
      create object CUSTOM_CONTAINER
             exporting container_name = CUSTOM_CONTROL
    endif.
Regards,
Ravi
note : Please reward the helpful posts.

Error message c:\program files (x86)\itunes\ituneshelper.exe r6034

can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to login

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

On Mac OS 10.9.5 : impossible to initialize Photoshop because of an error of the program

I downloaded Adobe PhotoShop CC and Lightroom 5 (paid version). Lightroom 5 seams to work but Adobe PhotoShop gives an error message "impossible d'initialiser Photoshop en raison d'une erreur du programme" (sorry it's in French, in English this could be "impossible to initialize Photoshop because of an error of the program". Not any additionnal error code or comment.
I tried to uninstall, dowload and install again, but I still get the same message after the new install.
Has anybody experimented this problem ? Thanks for your kind help.

Thanks for tour suggestion, but unfortunately it does not work. I get a dialog box about virtual memory and the disks I want to choose for, but I cannot trash the prefs. I changed the disks to see and I still get the same message.

Syntax Error occured in Program in include " CNTN01

Hi,
We are working on SAP 4.6C to ECC 6.0 Migration. While testing One Transaction, I am getting following error:
The current ABAP program "CL_GOS_TOOLBOX_MODEL==========CP" had to be
terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"Z3I_CL_BASCULER_SCS_GOS=======CP " in include "<CNTN01> " in
line 13:
"Within classes and interfaces, you can only use "TYPE" to refer to ABA"
"P Dictionary types, not "LIKE" or "STRUCTURE"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
This Error is coming while executing transaction in ECC 6.0 however in R/3 4.6C it is working fine.
Pls Advice what should be done to resolve this issue. This issue is coing in alot of transactions.
I will appreciate if anyone of you can guide me regarding same.
regards
Sandeep

Hi,
I was trying hand on one of my Z class which contain include <CNTN01>. in its Local Types.
I commented the existing include statement and added new statement as
INCLUDE CNTN01_OO.
After saving now when i try to activate the Z Class, it is giving me following error:
INCLUDE CNTN01_OO
You can only define classes and interfaces at the highest level of CLASS-POOL.
CLASS Z5C_CL_MESSAGE, Internal classes in a class include "CNTN01_OO" does not start with the prefix (Z5C_CL_MESSAGE=======)of the current class pool.
pls advice what i should do correct this issue.
Sandeep

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Syntax Error in generated program.

Hi Experts -
I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
I get an error message:
Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
There is a syntax error in the code.
How do you solve this issue?
We applied OSS note 822323 but still get the same error. The code still has the syntax error.
Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!

Hi,
Use the program RSA1HCAT in SE38 to check your hierarchy.
Transaction RSA3 was not developed for checking hierarchy DataSources.
Rather, it is only for transaction and attribute/text datasources. If
you want to check the extraction of hierarchy datasources in the R/3
system, you should use the report RSA1HCAT. In this report, enter the
name of the hierarchy datasource in the "DataSource with HierarchyType"
field.
For this problem look at the note: 632920.
Regards,
Srikanth.

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
Some things of note:
I did all of the things requested by the link I provided
My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
I did not uninstall iCloud
I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
Hope this helps!

Error in retraction program

Similar Messages

Maybe you are looking for