Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Similar Messages

  • Sales order stock does not exist error during PGI

    dear sir,
    we have two plants 1010 and 1020,we are using variant configuration for our finished goods
    we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
    so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
    but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
    if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
    how to resolve this
    thanks and regards
    srinivas pai

    There can be two reasons for these kind of error
    - Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
    - Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
    Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
    In either of the case, you have to again do the process.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Sales order stock does not exists

    Dear All:
    I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

    Hi,
    Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
    GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
    If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
    Regards,
    Saju.s

  • Sales order stock does not exist

    Hi All,
    In MTS scenario also while doeing PGI against a sales order/delivery the system is giving error prompt "sales order stock does not exist"
    What could be the reason? Pls suggest
    rgds

    hi
    goto MB1b here issue the raw material against the sales order no
    now do the PGI
    regards
    KI

  • Sales order cost estimate not happening because of GIT B/S account

    Hi,
    Requirement is to have Goods in Transit account in PGI and reverse it in Invoice no issues iwth it.
    For the same sales order user wants to get cost using sales order cost estimate.
    When i run that am getting following error
    Item 00001 : Cost element 14001212 does not exist in CO area 0010 for 10/07/2011
    Message no. KK689
    Even though i maintain the CE for Balance sheet account with Cost element category 90 its not accpeting.
    Can you please help me on how to proceed for sales order cost estimate.
    Thanks,
    sudha

    hi,
    if you give a balance sheet account in obyc , you will not be able to create a cost elementin category 01 , accordignly system will give error in sales order costing , as its not able to get correct cost element in cost planning.
    if your requirement is just to post  cogs to a balance sheet account which is goods in transit and when invoice is done cogs to be posted.
    you should actually use  revenue based RA functionality on sales order instead of assinging a balance sheet account in obyc.
    in this approach;
    - first assign a p/l account in obyc and create cost element in cateogry 01.
    - create revenue based RA and assign RA key in requirement class.
    - in OKG8 for RA category  WIPR and your ra key assign , goods in transit account and give a offsetting account which is not cost element (credit entry in offsetting account nullify debit in account given in OBYC when GIT is posted , when billing is done system will automatically post a oppsite entry in both account).
    -in OKG8 for RA category COSR give the COGS account and a offsetting account without cost element (credit entry in offsetting account nullify debit in account given in OBYC when COGS is posted).
    regards
    rajesh

  • Error "Account not found" in Catalog

    Hi All!
    I have a problem with the catalog of OBI EE.
    When connecting to multiple users showed the error "Account not found".
    I've located the "Catalog Manager" accounts whose permits were <delete Account>. I deleted those accounts and have been fully rebuilt. These accounts are already functioning.
    But to connect to the "Presentation" with the manager and access the option "Manage users and groups" by clicking the link "Show users and groups," again gives the error "Account not found". The log shows:
    An error occurred during execution of "connect". No connection could be made Actively Because the target machine refused it.
    [Socket: 868]
    Type: Error
    Severity: 42
    Time: Mon Oct 26 13:31:01 2009
    File: project / WebSecurity / securitymanager.cpp Line: 84
    Properties: ThreadID-6808; HttpCommand-getAccounts; remoteIp-10.12.127.129; User-Administrator
    Location:
    saw.httpserver.request
    saw.rpc.server.responder
    saw.rpc.server
    saw.rpc.server.handleConnection
    saw.rpc.server.dispatch
    saw.threadPool
    saw.threads
    Account not found.
    Any ideas?
    Regards.

    When you log in into presentation services as administrator, you can still see these users in the user list? You have to delete them not only via the catalog manager, but also overthere.
    And restart your services once...
    Hope it helps.
    Kr,
    A

  • Sales order number in not coming as a text in Accounting Document

    Hi Friends,
    Sales order number in not coming as a text in Accounting Document in INSTALLMENT BILLING PROCESS
    is there any config missing for this doc number
    Pl advise me
    Raju

    HI Prem,
    Please understand my query.
    In VF01 in accounting document we can see the text document field.
    Here i need the Sales order number as a Text field.
    But it is not coming over here
    Pl advise me
    Raju

  • Unconfirmed line items of a sales order into account in credit management

    Hi Gurus
    Updated the customer orders via prog. RVKRED09.
    There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
    Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure  equals item 10 and 30. So my 1question is: Where is the setting that  does not take unconfirmed line items of a sales order into account in credit management?
    Thanks in advance
    Regards
    Nalini Iyer

    Hi nalini
    Even though , you create a sales order for that line item , but if that item is not confirmed then the value  wont be considered.  into credit exposure. .
    But once it gets confirmed then the value will be taken into credit exposure..
    Regards
    Srinath

  • Sales Order number is  not showing in MD04

    Hi Gurus  ,
    I have got one case where  Sales order number is not showing  in MD04 screen  . This sales order , line item  has already delivered , PGI &  billing document also been generated  . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen  because at  the time sales order creation  availability check “01” was maintained  which has sum up all the  requirement in one  particular day ( Also as
    per SAP note -70408) .
    Now because  all the subsequent document has been generated  for sales order so we can not mark it for “Rejection for rejection “  & to create new  sales order  with  availability check “02” in material master .
    Please let  me know the possible solution for the same or  if any  sap note would  be required to get the sales order number in MD04  .
    Thanks  ,
    Aman

    Hi Kiran ,
    Actually  before running the  report in “SDRQCR21”  in PRD I wanted to  run it in “Quality “ .
    In quality I am not able to simulate the same  .
    Please refer below points related to my testing result .
    1.Mainatined availability check group “01” .
    2 . Created Sales order 
    3. Check in MD04 screen & as expected  sales order  was coming blank  with negative Qty .
    4. Run the MRP which generated PR
    5. PR converted to PO  & GRN was done which updated the stock
    6. Created delivery  & checked the same in MD04  . It was also coming blank  . No delivery  document  numbe was showing in screen  but  it was coming with negative  Qty .
    7. Done the PGI  & blank  delivery document number  was removed & it become  normal .
    In PRD .
    There are 3 sales order
    One sales order is already marked reason for rejection & two sales order delivery , PGI has been done  .
    But still it is showing  blank sales order with negative Qty  & after MRP run it is generating the PR also  .
    I don't why it was  showing with negative values  .
    Please refer attacehed screen shot  .
    Thanks,
    Regards ,
    Aman

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • Error in Your Order  The account was registered for a different country.

    go to upgrade and this is hwat it says. I have been online to check out oters answers and have tried everything suggest and still no good. i did just get a letter saying my information had been illegally found by someone. Can they ahve changed my settings without me knowing it.
    the error once i am in my cart says the follwoing
    Error in Your Order
    The account was registered for a different country. Please sign out and sign in using an existing account for this country.
              Ok

    Hi;
    Please review this related FAQ if you have not already and try the steps in here: http://forums.adobe.com/docs/DOC-2984
    If that does not help let me know and confirm whether the AdobeID (email address) you used to sign into this Forum is the same as your FormsCentral account and I will forward to support.
    Thanks,
    Josh

  • I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

    I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded".  Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • In Sales order plant is not allowing to change

    Hi Guru's
    In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
    dnr

    Hi friend,
    I suppose you cannot change the plant at order level if the material is created to a particular plant.
    As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
    Regards

  • How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this

    Dear Concerns
    In MB1C, Mov Type=521E, and the batch no=A.
    After entering all the required entries the systen gives me the warning and the system  save the transaction after pushing the enter button five to six times.
    Sales order (SOBKZ = ) is not provided for this goods movement.
    I want to get rid of this warning .
    So that the system could save the transaction in one click.
    Regards:Vijay

    Hi
    Can u please tell me the solution of that issue as in my case the item has to be received
    and reserved against the sales order.
    can i make my sales order item cate mark with the special stock indicator and
    does it help to solve my problem
    Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
    Then PGI will be smooth otherwise you can expect problem
    This reply is for the other friend
    In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
    Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
    Regards
    Raja

Maybe you are looking for

  • ZCover iPod Nano case for sale in UK, anyone interested?

    I am selling a zCover ipod nano case for anyone in the UK that wants it. Used for 1 week, but need to sell as I no longer have an ipod! Comes with the 2 cases and screen protector. Cheapest in the UK is £20, but I am starting bids at £10 If anyone is

  • How to I pair device

    How to pair with other device

  • Unable to connect the wi-fi network in my iPad

    Hi frds, I couldn't connect the wi-fi network in my iPad. It says "unable to join the network". I gone through all your instruction but I couldn't get any happy results. Can you help me to solve this problem?

  • Mozilla thunderbird on new 'puter rejecting my password

    I recently purchased a new computer.  I was using mozilla thunderbird on my previous computer.  I liked it so I wanted to use it on the new one also.  I keep getting an error saying the "user name or password is wrong".  I can still receive and send

  • How do you export LabVIEW SignalExpress Log files into MatLab?

    I am using SignalExpress to capture vibration and acoustic data.  I need to show the results to a customer that doens't have access to LabVIEW.  They have Matlab, so I need to find a way to export the SignalExpress log file into a usable format that