Error in SAP BPC

Hi Experts,
We are facing a strange error while sending data from input Schedule in SAP BPC 7.5 SP08. For Reporting Currency USD, we are able to send data from the input schedule but from reporting currency EUR we are getting the error
"Error running default logic()"..."Error converting records: The root element is missing.
In some of the other schedules, we can send data for EUR and not USD.
Am i missing something?
Thanks in advance

Hello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia

Similar Messages

MDX Statement error in sap bpc 10.1 admin when opening a report

I have restored a previously created environment that was built on the sap bpc 10.1 platform and am receiving the following errors when accessing my reports and clicking refresh. I also received an error when restoring the environment that says "Error occurred in expanding member formula". I don't believe these would be related but I am unable to access the member formulas in the model. I am however able to access all dimensions, etc. I am not able to create any new reports though. Any ideas on a solution.

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

Installing error. SAP BPC 7.0

Hi Experts,
I am trying to install SAP BPC 7.0 on microsoft platform in this multiserver configuration:
Server 1: Windows 2003 SP2 (US English) Application Server. WebServer. Only SQL Native Client installed.
Server 2: Windows 2003 SP2 (Spanish) SQL Server, OLAP Server, Reporting Services Server. All SQL components installed in Spanish.
Installing process is OK until Creating Appserver process when it keeps much time until an Error message appears. "Unable to create AppServer".
any idea?
Thanks in advance

Hi,
Collation specified into installation guide is required. If it is not right then some of databases or tables can not be created.
Yes SSIS has to be installed into application server is one of prerequisite software.
1433 port is not open then it is possible to have problems with comunication between application server and sql server.
1433 port is used by sql client from application server to comunicate with server.
Make sure you are using a port which is open between application server an sql server.
Port 1433 can be changed into sql server for comunication (this is default one).
So first make sure you have open the ports for SQL and SSAS open between application server and database server.
After that make sure you have the right collation into sql.
Kind Regards
Sorin Radulescu

Import package error in SAP BPC 4.1

Hi,
Can anyone please assist.
I tried running the import package several times on bpc ver 4.1 without aby success. I even tripple checked Users and Security and it validated successfully but the package still crashes in the middle of processing.
The error message read:
[Package Result = Error]
Package:                    Import
Appset:                       CQS
Application:                 FIXEDCOST
Request Time:             2009-06-23 13:44:42
Start   Time:                2009-06-23 13:44:42
End     Time:               2009-06-23 13:48:51
Total   Time:                00:04:09
TOTAL STEPS 3
1. Assign initial parameters:        completed in 0 sec.
2. Convert data:                     completed in 7 sec.
3. Load and process:                 Failed in 241 sec.
[Selection]
FILE= DATAMANAGER\DATAFILES\CQSSA\2009\Fixed Costs Testnew.txt
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
CLEARDATA= Yes
RUNLOGIC= No
[Member Selection]
CATEGORY: ACTUAL
ENTITY: SQSSA
TIME: 2009.MAY
[The list of conversion file in each transformation file]
Transformation file: DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTACCOUNT
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTCENTRE
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!MARKETS
[Messages]
FIXEDCOST
Failed
Submit Count : 15278 (Record count in source file : 20056)
Accept Count : 0
Reject Count : 15278
You do not have WRITE authority.::ACTUAL
Where can I enable WRITE authority?

Hi Vishal Mahawadhi,
Thank you for replying. I've tried all your suggestions before I even logged the query. I even went to analysis manager, gave access to the application and processed the cube but still that didn't help.
But I noticed that I only have read access when I look at the settings on the roles in analysis manager. The problem is that I can't change the settings to read/write. Version 4.1 is a mess.

401 Unauthorised Error in SAP BPC Client

Hello Experts,
Recently we have moved to new facility of our company from where we are trying to access BPC Admin client and web url.
We have BPC 7.5 NW version of BPC Server.
In our previous location we had Windows XP workstation with IE 7 and we were able to acess with no problem.
In the new location we have desktops with Windows 7 and IE8. Are there any additional security settings we need to take care of in Windows 7?
Also from both locations we are accessing BPC server through VPN. IS there any additional setting for accessing BPC server through VPN?
Please share some tips for the above issue.
Thanks.

Hi Mak,
Can you please look into SAP Note: 1540512. Here are the excerpts:
Issue was fixed in BPC NW 7.0 SP08 and is schedulled for fix in BPC NW 7.5 SP06
Workaround solution 1 is to attempt to connect with the same user to BPC Admin client once and then try to access web page again
Workaround solution 2:
a. in BW run SE16 and view table UJA_LAST_USER where USER_ID = domain\username
This table defines which system was last accessed by the user
b. Check that application set in APPSET_ID and application in APPL_ID are currently accessible for this user
c. Only if the application set mentioned was removed, please edit both APPSET_ID and APPL_ID to a correct value of an application set and application the user has access to (you can copy the value from another user's).
Hope this resolves your issue.
Rgds,
Poonam

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

SAP BPC 7.5 Installation Error

Hello All,
We got a requirement to install the SAP BPC 7.5 on top of fresh machines with SAP BI 7.02 for our customer. As a part of installation and configuration process i have downloaded the SAP BPC Patches and installed on top of BI 7.02 with enhancement pack 2. created a new apshell Apshell whcih is default. the server was included in a DOmain XX. I also craeted the Dot Net server with domain user and which was included in admin group successfuklly. i was able to see the dot server manager diagnoistic green and successful. Now the real confusion starts.
1. After installation of BPC DOT NET server on Windows 2003 server wich was already included in the domain now when i ca access the server http://localhost/osoft which is taking me to the screen sap bpc console and givig me a couple of options like
1.Interfact to word
2.interface to powerpoint
3. Interface to excel
4.Interface to web
5.Administration
when i click on administration it is taking me to second screen where it is askig me to select Appset in a small popup windows. There i dont have any popup to select where as it is leading to empty screen where there is no popup. when i click on ok then it will lead to again the main screen it have all the options interface to word,powerpoit etc..,
I am really confused where i am missing ad whether i need to do anything else more for the same.
I also see lot more in the installatio guide like select apshell.db9 etc where i am unable to see that option. i no where saw the file with name apset. I also saw in the some blogs and installation guide saying that to select the option install on top of mssql2005 where as i didnt see such an option anywhere.
Can any one guide me o this where and what i am really missing.
Edited by: Hemanth Kumar on Dec 25, 2010 5:18 PM

Hi,
This is one of the most common error I encountered during my recent BPC Project . This can be solved by the following ways.
1.Please check the authorizations ( make sure to have full admin authorizations for the Apshell) .
2.Make sure to Re- install both admin & client tools (check the Diagnostics and uninstall re-install both admin & client tools once.)
Regards
CSM Reddy

Error when creating a business activity in SAP BPC 10.1

Hi Experts,
I am failing to save a new business activity in SAP BPC 10.1 when setting up a new business process flow. I can validate the the activity successfully, however when I try to save the activity i receive the following message " Saving the workspace failed because of a missing root folder; contact your system administrator"
Please can anyone help me with why I am receiving this message?
Thanks so much

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Full Optimize Error - OutOfMemmory in SAP BPC

Hello
Has anyone come across the following error when running a full Optimize from SAP BPC Administration.
Error Message: Exception of type system OutOfMemoryException was thrown.
I've raised a support call but would appreciate any help on knowing why this happens and how I can resolve it.
Many thanks
Hina

Hello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia

Error on the SAP BPC patches

Dear SAP Support,
I used the SAP BPC 5.1 SP 3 and Ms.SQL Server 2005 SP 2 in my dev environment , I have upgrade it to be SP 11 and Ms.SQL Server 2005 SP3. SAP BPC upgrade for server, Administration, and Client(office) ran perfectly and based on the SAP BPC documentation, but I really confuse when I log in the SAP BPC Administration Console, appears the error window as following:
Public member 'SetMemberSheetVer' on type 'FormMain' not found
How to solve it please ? Please expert could help me.
Best Regards,

Hi,
When you process dimension for the first time, a message window will pop up asking to select the version, 2003 or earlier, or 2007. Once this option has been selected. It creates an entry in the table tblDefaults and cannot be changed later.
If you have selected 2003 or earlier, then the dimensions will be saved with .xls extension. In this case, all the excel versions (including 2007) can open the dimension sheets.
If you have selected 2007, the dimensions will be saved with .xlsx extension. In this case, the dimension sheets can be opened only if your system has 2007. If any system has 2003 or earlier version, then they will not be able to open the dimension sheets.
In this case, you need to go to the table and explicitly mention the version in MEMBERSHEET_VERSION.
Hope this helps you.

Error when loading templates on connection to SAP-BPC

Dear Experts,
I have a user who has a error when connecting to SAP-BPC. The error message this user gets is:
bold"AUTOMATION ERROR: an attempt was made to load a program with an incorrect format"bold
Do you have any idea on how to solve this problem?
Thank you very much for your help.
Kind regards,
Chanthy CHONGKAM

Hi,
We already tried to connect with the user login on another computer and it worked correctly.
We also reinstalled Excel and SAP-BPC but with no sucess. The same error message appears.
Kind regards,
Chanthy

Error in Data upload through Flat files in SAP BPC

Hi,
we are trying to upload data from flat files in SAP BPC but an error is coming viz Object reference not set to an instance of an object .

Hi,
Can you please cross check the file structure and the transfer structure.
Cheers,
Malli....

Bunch of ERRORS after installing SAP BPC 5.1 for the first time

Hi guys
Our basis guy is installing SAP BPC 5.1 for the first time. After the installation, I can get into SAP BPC - Administration screen but I get a lot of errors when I try to do some changes. Some of them are -
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
    Error on uncompressing file: Error : ActiveX component can't create object.
2. Create dimensions -
    Split File Error
3. Delete dimensions -
   OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
4. BPC for Excel (I am logging in as a system admin)
    The dimension information file cannot be created. There may be a network or security issue.
    Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
I am sure I will get a lot of errors once I start playing with the configuration.
Please comment.
Thanks,
Ameya Kulkarni

Hi Ameya Kulkarni,
I sorry I wrong type something,
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
Error on uncompressing file: Error : ActiveX component can't create object.
==>
You should do this step such as:
1. copy file "XceedZip.dll" into the directory SAP BPC
2. register that file into the register window using sintaks: "regsvr32"
3. If the successfully message box appears, You should open the MS.Excel or SAP BPC administration
2. Create dimensions -
Split File Error
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
3. Delete dimensions -
OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
4. BPC for Excel (I am logging in as a system admin)
The dimension information file cannot be created. There may be a network or security issue.
Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
==>
You must solve the problem no.2&3 because you should add new user through SAP BPC Administration for the application.
I wish My Suggestion can help you.
Regards,
Wandi Sutandi

SAP BPC 7.5 NW - BPF Error

Hi all,
I have created a BPF template in BPC 7.5 NW. When I click on a step, an input schdule should open up in Interface for Excel, but this does not happen. No action is excuted. Whereas the same BPF template in another system (in the same domain) opens up as expected. I did check the computer settings and both the computers have the same settings. We run on Windows 7 (64-bit), MS Office 2010 (32-bit) and SAP BPC 7.5 NW SP07 Patch 1.
Thanks
BSV

Hi,
Add your BPC IP address under trusted sites of Internet explorer and check.
Tools>Internet Options>Security-->Trusted Sites->Sites
Hope it helps...
regards,
Raju

Error in SAP BPC

Similar Messages

Maybe you are looking for