ERROR IN SAVING MARKETING PLAN

HI forum
when i saving the marketing plan in 5.0 getting the error like can't get RFC for SEM. anybody suggest how to solve this.

Hi Madhu,
If this error comes u have not definef the terget systen for ur mktg. Go to IMGCustomer Relationship ManagementMarketingMarketing Planning and Campaign ManagementSystem Landscape--Define Target Systems (ERP, BI, SEM, CPRO)
Hope it helps. Reward the points if it helps
Thanx
Chinmaya

Similar Messages

  • Error in saving project plan in project server 2007

    I am  getting following error when I try to make a change and saved the  project plan. It has happened several times since yesterday. Not sure if the file is corrupted.
     Is it possible to make a copy of the file and mark the current file as inactive?
    The File cannot be opened.
    Check that the File name and path are correct.
    Check that the File format is recognized by Project.
    Project Files saved in a version earlier than Microsoft Project 98
    can't be opened.
    If your File is From an earlier version, open it in that version, click
    Save as (File menu), and save in MPX Format Open the MPX File. When
    you use this method, project data is imported, but Formatting is lost.
    Has any one has same issue? any suggestions please reply.
    Thanks-

    Hi Micahel,
    Thanks for the posting!
    what would be solution inorder to make it working.i was looking at some posts which i listed below for some it had worked....i did not try it but just guessing it would work
    1. Launch Project Professional 2007 and connect to Project Server.
    2.  In the new blank project (Project1), click Insert - Project.
    3.  Select the troublesome project.
    4.  DESELECT the "Link to project" checkbox and then click the Insert
    button.
    5.  When prompted to save the changes to the troublesome project, click the
    No button
    Or in another case it may  be
    Saving as a template with re-open is a smart work around, typically when a network connection gets dropped.  In these cases
    we have copy/pasted to a new file, or, saved as XML and then reopened.
    I appreciate any kind of help on it.
    Thanks
    Tummala

  • Error while saving data form in planning

    Hi,
    We are getting the below error while saving the data form in planning
    "There was an error during the save process"
    i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
    can any one please help me on this

    One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

  • Please tell what to do if I see this error while opening an plan or while saving this plan?

    Error messsge: the enterprise global already contains a table named “Enterprise Entry”.
    Do you want to replace the table with the one from the enterprise global, replace all items with duplicates, rename the table in the project, or cancel opening the project.
    Please tell what to do if I see this error while opening an plan or while saving this plan?

    A-K-J --
    The error message indicates that your Project Server administrator has accidentally polluted the Enterprise Global file with local view and/or tables.  The solution does not lie with the user.  It does not really matter what button the user clicks
    in the dialog, since only the Project Server administrator can solve this problem.  To solve the problem, the Project Server administrator must do the following:
    Open the Enterprise Global file editing.
    Click File > Organizer.
    On the right side of the Organizer dialog (in the Enterprise Global file), delete any non-enterprise views.  There should be NO views named Gantt Chart, Resource Sheet, etc.  The only default enterprise view is named Enterprise Gantt Chart, which
    should not be deleted.
    Click the Tables tab.
    On the right side of the Organizer dialog, delete any non-enterprise tables.  There should be NO tables named Entry, Work, Cost, etc.  The only default enterprise table is named Enterprise Entry, which should not be deleted.
    Click the Close button.
    Save the Enterprise Global file.
    Close the Enterprise Global file.
    Close Microsoft Project, relaunch the software, and log into Project Server again.
    After completing the above steps, every PM should also exit Microsoft Project and relaunch the software again.  Hope this helps.
    Dale A. Howard [MVP]

  • Execution error in Marketing planning

    Hi all
    I am getting following error "CL_CRM_MKTPL_APPLICATION====CP" while creating a new market plan. It an is execution error.
    PLz help me out
    Regards
    Quantuscumque
    Edited by: quantuscumque on Aug 16, 2010 9:58 AM

    Hi Quants ,
    Please be informed that as of release 5.1,SAP GUI is suppose to use
    only for administrative tasks and for transactions,new WEB UI.
    Please check the attached note 1118231 for more information.
    Thanks & regards,
    Krishnen

  • BPS Marketing-Planning RFC-Error when Using summation

    Hi Together,
    we're using BPS for planning Marketing-Costs. The BPS-Layout is Included in a CRM 7.0 WebUi, and we're able
    to plan Marketing-Costs.
    The Layout is defined as keyfigures in data-columns, rows are defined individually.
    If I add an extra Summation row and/or an extra summation column I'm getting an RFC Error
    in the WebUi.
    Has anyone an idea why summations causes such an error?
    Kind regards
    Lars

    whenever I go to "Planinng" tab for an Opportunity, I get the below error. I guess I may have to do some Planning Services Setting.
    Error in planning services
    Planning Services Error
    Error messages - count 0001:
    Planning area does not exist

  • Saving of Marketing Plan, Campaign and campaign element is slow

    Hi All,
    Saving of marketing plan, campaign and campaign element is taking lot of time. What could be the reason for this?
    Please suggest pointer.
    Regards,
    Nikhil

    Hi Nikhil,
    Use the transaction st05 to check the performance analysis.
    1. Goto the transaction st05.
    2. Activate the trace.
    3.Then do your operation which is hanging.
    4. Deactivate the trace.
    5. Display the trace.
    There you can find where the system spends most of the time.
    Regards
    Leon

  • WCM Error while saving Project

    Hi,
    I am getting following error while saving new created project in cProject.
    Saving is not possible because the WFM Core data could not be adjusted
    Message no. PRP086
    Diagnosis
    When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
    The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
    The WFM Core configuration has been changed in Customizing.
    The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
    When working with the application, an existing resource already assigned in the WFM Core is deleted.
    System Response
    The project cannot be saved.
    Procedure
    Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
    Let me know how to resolve this issue??
    Thanks in advance,
    Atul.

    hi Atul,
    Are you using WFD server for your resource planning in cProjects???
    If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
    If not, then do following settings to remove the error you are getting:
    1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
    Maintain following setting:
    Group     Sem. abbr     Value abbr     Description
    HRALX     HRAC     X     Activate HR Integration
    2) SPRO -> Collaboration Projects ->  Resource management Qualification Management->  Activate Qualification Search and Matchup Using WFM Core
    In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
    Hope this will be helpful to you.
    Regards,
    Niraj Sikligar

  • Error while saving general customer data....Help needed...!!!

    Hi all,
    I am testing peoplesoft 9.0 version for an upgrade project. When i try to save the general customer information using Home>Customer>generalinformation . i got the following error. *"Invalid parameter 1 for function currentrownumber (2.116) TABLENAME.FIELDNAME.savePostChange*"* . this is custom people code in a custom table. plz help me to solve this.

    One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

  • Text determination procedure in Marketing Plan

    HI All,
    I am using text object CGPL_TEXT and Text determination procedure MPL assigned under it. Text determination procedure MPL has two text types "Description" and "Notes". System is allowing to select "Notes" in marketing plan and enter the text. Next time if I try to select same type "Note" then system is giving error "Make entry in the field Language". But I can select other type "Description" and enter the text.
    Does it mean system allow to enter text for a text type only once? What if I want to use same text type for multiple time to enter information related to the same item.
    Any pointer?
    Regards,
    Nikhil

    Dear Nikhil,
    You are correct that in standard only one text type can be created per language... i.e. 'Note in English' or 'Description in English' can only be created once. But you can certainly add information to a previously created text type.
    I'm not sure if there is a technical way to change this.
    Regards,
    Anik Roy
    SAP CRM Moderator

  • Attachment in Marketing Plan

    Dear all
    I was creating a marketing plan in CRM. I saved a excel file as attachment in the element of marketing plan. Now I want to get  the data in excel file .
    Please suggest.
    Edited by: Abhinav Saxena(CRM) on Dec 8, 2011 9:08 AM

    Hi Abhinav,
    - Table SMOATTACHLNK is the attachment Link table to link attachments to Business Objects like Marketign Plan.
    - Table SMOATTACHMNT is the attachment Header table containing all the file attributes like Name, size, physical path, logical path etc.
    - Link between SMOATTACHLNK and SMOATTACHMNT:
    1. Pass Project GUID to SMOATTACHLNK-PARENTID, and extract SMOATTACHLNK-SFAATTACHMNT.
    2. Pass extracted SMOATTACHLNK-SFAATTACHMNT to SMOATTACHMNT-SFAATTACHMNT, and extract PHIO_ID, PHIO_CLASS, LOIO_ID, and LO_CLASS.
    - Get the content of file
    Use class CL_CRM_DOCUMENTS. It has so many methods to deal with attachment and its content.
    For example, to get the binary content of attachment,
    1. Create object of class CL_CRM_DOCUMENTS, and use method GET_DOCUMENT with exporting parameter IO-OBJTYPE = P, IO-CLASS = PHIO_CLASS, and IO-OBJID = PHIO_ID (Process by using PHIO details). Similarly, we can also use LOIO details as IO-OBJTYPE = L, IO-CLASS = LO_CLASS, and IO-OBJID = LOIO_ID as exporting parameter.
    2. Importing parameter CONTENT_BIN of class CL_CRM_DOCUMENTS will contain contents of the attachment in Binary format.
    Hope this helps.
    Regards,
    Susanta

  • Crm 7.0 - marketing plan creation ??

    Hi All
    How do we create a marketing plan in crm 7.0, we get an error when we execute this T code crm_mktpl.
    Regards
    Mohammed

    Hi Mohammed,
    That transaction is not supported anymore in version 7.0. You have to use WebUI.
    Enter on it using MARKETINGPRO business role, and you'll find it in marketing viewset.
    Kind regards,
    Garcia

  • Error Message in Market Planner

    Hi,
    Does anyone know if the following error has any effect on "Warning System CLNT400BW0 cannot be reached" on the Market Planner? What do i have to do to eliminate this message? Call in basis/BW team?

    Hi Noobie
    this warning comes, because the BW client is not available for you to use and the marketing planner needs it for key figure planning and analysis.
    But the marketing plan can work with this warning also but these functionalities will not be available to you
    If you want this error not to come, you will have to get the logical system for BW created and connectivity maintained
    Hope this helps
    Regards
    Rekha Dadwal

  • Marketing Plans & Campaigns

    I am a BW developer and have a project to work with CRM to build the Marketing Plans & Campaigns.  I have some experience with BPS, so I think I can work with this piece of it also.  However, the first problem I am having is when I go thru the following in CRM:
    SPRO->Marketing Planning and Campaign Management->Key Figure Planning
    The problem I have from this point is when trying to go into Planning Workbench or Define Key Figures. 
    When I try Planning Workbench, I get an error "Access via NULL object reference not possible." 
    When I try Define Key Figures, I get "You are not authorized to use Transaction UMK_MB"
    When I do an SU53 for both of these, it shows all authorization checks were successful.  So I am thinking there may be a problem with the BW to CRM connection.  However, we have another CRM project that I am not having any problem with.
    My next question is how does BPS play into the Marketing Campaigns?  I thought all the planning happens in CRM, so why can't I just pull the results into the BW InfoCube, instead of going thru BPS.
    Any info about anything to do with this, would be greatly appreciated.

    Hi Keith,
    Please check the below link which will explain how BPS is integrated with CRM Marketing planning & Campaign Management.
    http://help.sap.com/saphelp_crm50/helpdata/en/8e/6480ac5efb49f795efe5a50a1d3e07/frameset.htm
    Also please check if you have made the below customizing in CRM for BI :
    BI Update flag: Marketing --> Marketing Planning and Campaign Management --> System Landscape --> Activate BI Update.
    RFC Connection to BI: RFC connection to the BI system in Customizing by choosing Marketing
    -> Marketing Planning and Campaign Management --> System Landscape --> Define RFC Connection
    Also please make sure that user assigned to the system is a dialog user and the user has the required planning authorizations.
    For BPS planning Authorization please see the below link:
    http://help.sap.com/saphelp_crm50/helpdata/en/c8/ad8438619a7c51e10000009b38f842/frameset.htm
    Hope these help !
    Regards,
    Naveen

  • Getting run time error for multiple counter plan

    Hi Friends,
    Its very critical issue,wherein i am getting run time error for multiple counter plan.
    Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
    Please find the screen shots for your reference and please let me know how to fix the issue.
    Regards,
    Srinika

    Hi,
         Please check reason for update termination in Transaction code SM13.

Maybe you are looking for