Error in SLG1 after reversal EA13

Hello friends,
we have an issue when reversing a document with EA13.
First of all the document was reversed, however we had a error message "S:EDER:541".
We were able to apply note 1733506 .
Now we are getting the following error (but document is still reversed).
No items found
Message no. >4541
Maybe its an OSS note but i want to check with you guys first.
Any help appreciated.
Thanks,
Andreas

Hi Andreas,
The error message that you are getting is arising from the correction instructions that were deployed as a part of the SAP note-1733506.
I dont think that the note 1733506 has fixed your error completely, because in either of the two scenarios as per the Corrected instructions, you will get an error message,i.e- either EDER 060 or >4 541.
I would request you to contact SAP for the same.
Hope it helps..
Thanks,
Amlan

Similar Messages

Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

Thank you for the tips!
OGELTHORPE wrote:
I would check to see if the WD HDD has its own Sudden Motion Sensor. If so, it may be coming in conflict with the one in the Mac. If that is the case, I suggest disabling the SMS in the Mac.
WD5000BEVT does indeed have it's own protection:
ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
Melophage wrote:
this could be indicative of a faulty internal SATA cable. /.../
Reteep,
you could try the same thing as well.
In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

Error 150:30 after restoring CS4 from Time Machine backup

I just got myself a new Imac with OS X Maverick and set it up using a time-machine-backup. My Adobe CS4 now has a Problem with the license and shows me error: 150:30?
Do I need to uninstall CS4 and reinstall? Is there any easier solution to this problem?
Thank you anyone for some help.
chris

Thanks a lot for your help......everything back to normal after reeinstallation.
chris
Am 29.09.2014 um 23:28 schrieb John Waller <[email protected]>:
Error 150:30 after restoring CS4 from Time Machine backup
created by John Waller in Adobe Creative Cloud - View the full discussion
Do I need to uninstall CS4 and reinstall?
Unfortunately yes.
Also run the Cleaner Tool prior to reinstalling
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Restoring from Time Machine backups invariably breaks the activation mechanism (Error 150:30) and there's no easy way to fix a 150:30 error other than via re-installing.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6775090#6775090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

Error in finder after install osx mavericks

error in finder after install osx mavericks

I have a similar problem but the error code that keeps coming up is -600 please help !

Getting error in DB02 after checking Consistency check Unknown objects in A

Dear All,
I have getting error in DB02 after checking Consistency check.
Please find the details.
I have queries.
How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.
Missing in R/3 DDIC      1              11
Consistency check of 07.04.2009 10:14:24
-- Objects missing in the database
Primary indexes                  0
Secondary indexes                0
Tables                           0
Views                            0
-- Unknown objects in ABAP Dictionary
|   |-- DB tables                        1
      |-- DB indexes                      11
     |-- DB views                        12
-- DB tables without unique index   1
-- Optional indexes
Too many indexes created         0
-- Indexes not created            145
Regards,

Hi
Check this may help you
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
Regards
Uday

Errors starting JBoss after installing OIM

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Error code msvcr80 after last update now itunes will not open

Error code msvcr80 after last update now itunes will not open. Reinstalled and still does not work

Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98968)

Getting error message -050 after downloading 11.1

Getting error message -050 after downloading 11.1, radio and match do not work.

What is the version of your OHS. Are you referring to 11gR2 webgate for OHS ?

Lost payment method after reversing the payment and check

Hi all,
After reversing payment and check via FB08 , the payment method stored in payment document is cleared.
does anyone know that why the payment method in the payment docuemnt is cleared after reversing the document ? and where can I chase back the payment method ? Thanks

Hi Sreehari,
Thanks for your reply. The configuration you mentioned have already been set. The payment method can be determined by vendor master when creating invoice and the payment method can also be stored in the field "payment method" in payment document. But the problem is the value of the filed "payment method" in payment document will be cleared after reversing the payment and cheque. As a result, we can't chase back the payment method in the reversed payment document.
Regards,
Ken

Javascript error in BEx after system database copy

Hello,
we made a database copy of our BW 3.1 system on another hardware. After having done everything described in the How-To-Guide "Enable SAP BW Web functionality", we called the BEx via URL. The login screen displays and also the Report menu, but there occur JavaScript errors on the page, that didn't occur in the copy master. E.g.
"SAPBWSSgdo is null or not an object" or
"SAPBWItemCatalog undefined".
These errors prevent the choice menu for BW report value options to be displayed, which is quite annoying. Does anybody know where the error might come from? Are there any components required by BEx which weren't copied with the database copy?
Thanks for your help in advance,
Volker Hofmann

Hi Beat,
thanks you're helping me! The MIME-Repository objects like JS-Files, stylesheets and images can be read. The strange thing is:
The J2EE engine is hosted by a provider. When they're calling the BEx web reports, they're displayed correctly. But when we call them (via proxy!), the error occurs. Even the application management doesn't know where the error comes from, after having checked if the proxy caches old data. The error is still not resolved...
Do you have another idea?
Regards,
Volker

Error message 16 after install

I have error message 16 after installing Photoshop CC and LR 5. I've tried uninstalling and re-installing. I have a MacPro running Mavericks. Any ideas?

well, it was worth a try...Any other suggestions? It still isn't working.

BADI or User Exit for VL09 after Reversing

Hi Experts,
I have a requirement that updating certain values in Custom Table after Reversing a Delivery. Is there any BADI or User Exit which trigger After Reversing a Delivery in VL09.
Thanks in Advance.

1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute your SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction

Error in SLG1 after reversal EA13

Similar Messages

Maybe you are looking for