Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Similar Messages

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Error while extracting the data from R/3

HI all,
I am extracting HR data from R/3 system.
It is throwing the below error message.
Error: Splitting error User Exit employee/date/hrs 00100545 20071106 2.000
I am not sure how to rectify this error. Is this issue with data in R/3? Does it have to be corrected in R/3?
Do let me know what can be done.
Thanks in advance,
Maddy

Hi Maddy,
can you tell me if there are any routines used to split the employee, date and hrs fields data?
If so check for the code is with our systez errors?
What is the source system?
what is the data source?
Did you check for how the data exist in the source? goto RSA3 and check for the data how it look like for the employee , date and hrs records.
Regards
KP

Error in Source System while running the Full Load

HI Experts,
We are using 0CRM_UT_SRV_CONT_I datasource from CRM to extract data.
It is giving error while running the full load as 'Error Occured in Source system' with messaage Number : RSM340.
I want to mention certain points here:
1) In RSA3 its running fine.
2) Connection between BW and CRM system is OK.
3) We have replicated datasource and send active veriosn from Dev system.
4) When I run Init without data, Init set sucessful with entry in RSA7 in CRM.
5) Delta run fine with green status.
6) As source system is static client, hence do data for delta.
The Main issue happens when we run either the Full load or Init With Data transfer.
Kindly suggest.
Thanks
Mayank

Hi Mayank,
see in source system (CRM) with transaction SM21 and ST22 the error log and and then you let us know.
Charly

Error in ERP system while copying the document from CRM system

Hi Friends,
I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
also
with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
"input data for industrial material is not fully"
regards,
sunil

Hi Sunil,
You are getting error in the Sales Order is because of Master Data.
Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
Please maintain the master data in R/3 side & download into CRM Side.
For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
Use following link for downloading Customer Master & Material master.
http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
Best Regards,
Rajendra

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while retracting the data from BW system

Dear all,
while retracting the data from BW we are getting the below dump
"Inconsistent entry in table TKA07 (Plan Version Maintenance)",Request you to please help to solve the issue
Thanks,
Jyoti

Jyoti,
Could you please explain in detail, were you using any standard retractor or custom?
is it erroring out in ECC system or BI?

Error while extracting the data

Hi All,
i am facing a problem while loading the data from the flat file to the DSO. i am working on BI 7. data is loaded to psa but all columns com under the one column. like this 10, jjj, a10, m10, s10, n. i know that i had made a mistake pls help me out.
Thanks & Regards
KK

Hi KK,
If it is a CSV file you need to select 'data format' as CSV... and 'data separator' as ',' in the extraction tab
Assign points if this helps.
Regards,
Anil

HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

Hi experts ,
I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

Hi Sushma,
how to configure sendor JDBC adapter ..
Select adapter type is JDBC..
Give the Transport Protocol:.JDBC 2.0 (Example)............
Message Protocol:...JDBC...........
IAdapter Engine : Integration Server
Processing Parameters..
Quality of service.....(Example)..Exactly once
Poll Interval .... Example ..10
Query Sql statement..Example ..select * from XXXXX
Document Name.....
Update Sql stetement.....
Thanks,
Satya
Reward points if it id useful...

Can't extract the data from sourse system

hi,everyone
i have a question about extracting the data from sourse system.i created a general datasourse.in the r3 system,i used t-code:rsa3 to extract the data successful. but ,when i replicate the datasourse to the bw system,i can't extract the data to the psa. in the process of the extracting,accur a error like below:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the
authorizations of the background user in the source system.
who can tell me why?
thx
zhang

Hi zhang,
Please check the below points.
1. Perform the connection and authorization test in SM59 for the RFC connecion.
2. Make sure the RFC user extracting the data is having sufficient authorization and correct profile as per note 150315.
3. make sure there are sufficient number of Dialog process in BW in SM50.
4. check T code SM58 in source system for any more errors.
5. check the connection between the systems.
Check
Note 561880 - Requests hang because IDocs are not processed.
Note 535172 - IDoc: Dup. IDocs in tRFC inbound processing w/ runtime error
Note 555229 - IDocs hang in status 64 for tRFC with immediate processing
Hope this helps.
Regards,
Suman.T

Error While Testing the Data from RWB

Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
Sreeni

Hi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Error encountered while collecting the data from JMS topic bus

Iam encountering a problem while collecting the data from JMS topic bus and pushing the data to BAM.On the DesignStudio window, after I click on “update” button in the plan window to run the plan I get the following exception messages:
IMessageSourceReceiver->messageReceive:
javax.naming.CommunicationException: Connection refused: connect
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
     at
com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at
iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerS
tart(JMSMessageSourceReceiverImpl.java:1001)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageRecei
ve(JMSMessageSourceReceiverImpl.java:326)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:426)
     at java.net.Socket.connect(Socket.java:376)
     at java.net.Socket.<init>(Socket.java:291)
     at java.net.Socket.<init>(Socket.java:147)
     at
com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnecti
on.java:682)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSoc
ketRmiTransport.java:58)
     at
oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java
:78)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTr
ansport.java:68)
     at
com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.ja
va:646)
     at
com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientCon
nection.java:190)
     at
com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.jav
a:174)
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
     ... 5 more
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]

The error msg says that your BAM server cannot connect to your JMS provider. Make sure your configs are all ok, in EL DesignStudio, BAMArchitect EMSdefinition, etc. You can refer to the samples and technotes and tutorials to understand these details. If you are following the steps in the technote etc. pl verify your oc4j container is running, and oc4j version and 'jndi path' is ok. Give the doc name, pg number and step where you are getting this error.

Error in source system while extracting the data from R/3!

Similar Messages

Maybe you are looking for