Error in SQL Statement (ODS data loading Error)

Hello Gurus...
I am trying to loading the data Info Source To ODS in my ODS Key Figure Z_IVQUA (Invoice Quantity)
is getting the Error Message Data shows 0 from 0 Records.
I was Remove the Key Field from ODS Then try to load the data but i am getting same Error..
Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/Z_INVQUA
Errors in source system
Please Suggest....
Thanks
Prakash

Hello All...
Really appreciate if you can give me some advise. Thanks.
Prakash
Edited by: Prakash M on Jan 14, 2009 2:14 PM

Similar Messages

Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Error in Activation of ODS Data

Dear All,
I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
The program terminates at this line
Types corresponding to Change-Log-structure
l_s_chgdata TYPE /BIC/B0000103000,
The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
Thanks.
Fayak.

Hi Siggi,
Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
Test for Activation Program
Active generated load program not available
Activation Program is not Current
Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
Activation program has to be generated again
I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
Thanks,
Fayak.

Report -Error in SQL Statement

Hi to All,
Whe I ran the report on ODS its giving the following error.
Error Error in SQL Statement:DBIF_RSQL_INVALID-RSQL
Error Error When generating the SQL statement
Error reading the data of Infoprovider ZABCXX
Abort system error in Program SAPLRRK0 and form RSRDR;SRRK0F30-01
Note:ZABCXX is a Multiprovider
Then I identified data type is mismatched for 4 characteristics in ODS , I have changed the data type from Date to Char then deleted the data from ODS and reloaded the six Init packages with different selections.
After reloading I ran the report still same error its showing.
Is any bug in stadard program?
Pls can anyody throw some light on my problem.
Thanks,
Sha.

Hi,
Try using transaction code ListCube and see if you are able to see some entries in BW system itself.
Also in RSRT -> Query -> Environment -> Delete old abaps
Also in RSRT -> Query -> Environment -> Generate Queries
And let us know the outoput .
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Error in SQL Statement: SAPSQL_INVALID_TABLENAME

Hello all,
While displaying contents of infocube i am getting strange error ..
Error in SQL Statement: SAPSQL_INVALID_TABLENAME ABC
Message no. DBMAN256
( Table name length is 16 )
I am able to see the contents of Fact table.
Could not found any solution till now.. Any lights , views will be very much helpful.
Regards
Nimesh

hi Nimesh,
check oss note 835816
Symptom
When you execute a query, a data-mart, SEM, APO or similar access, an SQL error 4004 occurs "Unknown table name" Open SQL: Short dump with UNCAUGHT_EXCEPTION CX_RSR_X_MESSAGE in the ABAP Call Stack, you find the RSDRC_BASIC_DB_QUERY_DATA_GET function module.
Prior to this, relatively large datasets (more than 10%) were deleted from the InfoCube.
Other terms
Business Information Warehouse, Factview, DBMAN256, DBMAN
256, SAPLRSDRS, DELETE, DELETE_FACTS, RSDRD_DELETE_FACTS
Reason and Prerequisites
During the purge, the fact tables are rebuilt again as of a certain percentage, for performance reasons. The factview is then not created again.
Solution
Views that are already missing can be compiled again with the SAP_FACTVIEWS_RECREATE report.
The correction prevents the problem reappearing.
BW 3.0B
           Import Support Package 27 for 3.0B (BW3.0B Patch27 or SAPKW30B27) into your BW system. The Support Package is available whennote 0723258 with the short text "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 21 for 3.10 (BW3.10 Patch21 or SAPKW31021) into your BW system. The Support Package is available whennote 0723263 with the short text "SAPBWNews BW3.1 Content Support Package 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 13 for 3.5 (BW3.50 Patch13 or SAPKW35013) into your BW system. The Support Package is available when note 0765114 with the short text "SAPBWNews BW Support Package 13 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases you can use the correction instructions.
These notes may already be available before the Support Package is released, to make information available in advance. However, the short text then still contains the words "preliminary version".

Error executing SQL statement

Hi,
Can anyone see why I am getting this error message for my SQL query?
WITH SKU_DATA AS (
SELECT /*+ MATERIALIZE */ DISTINCT FROM_LOC_ID,
           SKU_ID,
           DESCRIPTION,
           UPDATE_QTY,
        ORDER_ID,
        CONSIGNMENT,
           WEIGHT,
        PALLET_ID,
        CASE
    WHEN Upd_Qty_Ratio < 1
    THEN TO_CHAR(UPDATE_QTY) || 'U'
    WHEN TRUNC(Upd_Qty_Ratio) = Upd_Qty_Ratio
    THEN TO_CHAR(Upd_Qty_Ratio) || 'C'
    ELSE TO_CHAR(TRUNC(UPDATE_QTY)) || 'C' || ' ' || TO_CHAR(ROUND(MOD(Upd_Qty_Ratio, 1) * USER_DEF_NUM_3, 6)) || 'U'
    END CU_Sum
    FROM (
SELECT DISTINCT
         FROM_LOC_ID,
      S.SKU_ID,
         S.DESCRIPTION,
         ITL.UPDATE_QTY,
         S.USER_DEF_NUM_3,
      OH.ORDER_ID,
      ITL.CONSIGNMENT,
      ITL.PALLET_ID,
         NVL(ITL.UPDATE_QTY,0)*NVL(S.EACH_WEIGHT,0) Weight,
         ITL.UPDATE_QTY/(CASE S.USER_DEF_NUM_3 WHEN 0 THEN 1 ELSE S.USER_DEF_NUM_3 END) Upd_Qty_Ratio
    FROM INVENTORY_TRANSACTION ITL, SKU S, LOCATION L, ORDER_HEADER OH
    WHERE ITL.SKU_ID = S.SKU_ID
    AND ITL.CODE = 'Pick'
    AND ITL.CONSIGNMENT = $P{Consignment}
    AND OH.ORDER_DATE = TO_CHAR($P{Date}, 'DD-Mon-YYYY')
    AND OH.ORDER_ID = ITL.REFERENCE_ID
    AND ITL.TO_LOC_ID = 'CONTAINER'))
SELECT DISTINCT ORDER_ID, CONSIGNMENT, WEIGHT, PALLET_ID, CU_Sum,
(SELECT NVL(TO_CHAR(SUM(CASE WHEN NULLIF(SUBSTR(Cu_Sum, -1), 'U') IS NULL THEN NULL ELSE REPLACE(Cu_Sum,'C',NULL) END)),'0') ||'C' || ' ' || NVL(TO_CHAR(SUM(CASE WHEN NULLIF(SUBSTR(Cu_Sum, -1), 'C') IS NULL THEN NULL ELSE REPLACE(Cu_Sum,'U',NULL) END)),'0') ||'U' FROM SKU_DATA) AS Total_Cu_Sum
FROM SKU_DATAThanks in advance.
SM.

Hi Sean,
It is saying error executing SQL statement, but with no "ORA error" so maybe its a Jasper Reports error i'm not too sure.
And this is a different version of the one we done together, that one is running fine just having problems putting the jasper file on to the server. I'm just using the main bits from the original SQL.
SM

SAP BW 3.5 "Error in SQL Statement: DBIF_RSQL_INVALID_RSQL" in Infospoke

Hi ,
I am working on SAP BW 3.5.
while downloading the records through infospoke and giving them to the Application server side, I am getting an error "Error in SQL Statement: DBIF_RSQL_INVALID_RSQL".
Daily the Infospoke runs on delta mode. But for downloading of few records i have deactivated the delta and changed it in to Full mode. After downloading the data I again Activated the delta.but while Executing on Background mode I am getting an error mentioned above.
can anyone please suggest a solution for resolving this error?
Thanks in advance.
Santosh.

Hi:
Did you do some recent change in the objects?. I face sometimes this error and it is due to misalignment among the objects in a data flow (cubes, DSOs, transformations, DTPs, etc.).
What you can do is activate everything again.
Best regards.

Error in SQL Statement: SAPSQL_INVALID_TABLENAME /BI0/V0FIGL_C01F

Hi,
When I am executing datasource 80FIGL_C01 using T.code RSA3 in BW3.5, getting error Error in SQL Statement: SAPSQL_INVALID_TABLENAME /BI0/V0FIGL_C01F
I am getting same error when pulling data from BW3.5 to BI7.0 at scheduling.
Can I have your valuable insights on this.
Thanks in advance!
Sapna

Hi,
Try the report sap_factviews_recreate. Warning: the program generate the views for all infocubes. When you don't want to do this, debug the abap and delete the infocubes from the table G_T_CUBE.
Or activate the infocube and re-generate the datasource.
Sven

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/ZREVISQTY

Dear Guys,
Regards..In the "Listcube" transaction and "Manage Contents" of the cube,whenver i execute the transaction to get the 'Output List' ,i get the following error : " Error in SQL Statement : SAPSQL_INVALID_FIELDNAME"..with the following obj : ZREVISQTY............But when i remove the "ZREVISQTY" from the selection screen in both "LISTCUBE" and "MANAGE" of the cube,the output works fine......It would be great if somone can throw light on this...........
Manythanks
Arun

Dear Guys,
Regards..In the "Listcube" transaction and "Manage Contents" of the cube,whenver i execute the transaction to get the 'Output List' ,i get the following error : " Error in SQL Statement : SAPSQL_INVALID_FIELDNAME"..with the following obj : ZREVISQTY............But when i remove the "ZREVISQTY" from the selection screen in both "LISTCUBE" and "MANAGE" of the cube,the output works fine......It would be great if somone can throw light on this...........
Manythanks
Arun

SQL error, Error in SQL statement

hi all,
in our project we are using 0SD_C03. while i creating aggrigates it's showining "SQL error" and Error in SQL statement.
please provide me some inputs.
sasidhar

check:
Aggregate issue
Problems with BITMAPINDEX under ORACLE in BW
SAP Note Number: 159779
No 'Star Transformation' for a Hierarchy Changerun
SAP Note Number: 934281

RMAN-10006: error running SQL statement: alter session set remote_dependenc

Backups are failing with following error
RMAN-00554: initialization of internal recovery manager package failed
RMAN-12001: could not open channel default
RMAN-10008: could not create channel context
RMAN-10002: ORACLE error: ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must be from among MANUAL, AUTO
RMAN-10006: error running SQL statement: alter session set remote_dependencies_mode = signature
Not able to change to signature
SQL> alter session set remote_dependencies_mode=signature;
ERROR:
ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must
be from among MANUAL, AUTO
I dont see MANUAL or AUTO as valid value for this parameter (http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1175.htm#1023124) DB version is 9.2.0
Parameter type
String
Syntax
REMOTE_DEPENDENCIES_MODE = {TIMESTAMP | SIGNATURE}
Default value
TIMESTAMP
Parameter class
Dynamic: ALTER SESSION, ALTER SYSTEM
=======================================
I believe it could be because of following bug
"A PRE-PATCHED ORACLE IMAGE CAN BE INSTALLED IN MEMORY "
Refer: "https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1613505143885559758::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,4610411,1,1,1,helvetica"
I appreciate your effort in fixing this issue.
Edited by: user10610722 on Nov 25, 2008 4:37 PM

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Error in SQL Statement (ODS data loading Error)

Similar Messages

Maybe you are looking for