Error in SRM 7.01,Trace showing Partner Ship-To Address not found in FEH.

Hi Gurus,
Please throw some light on my isssue.
We are developing Plan Driven Procurement Business Scenario in SRM.
Current System details are ECC 6.0 EHP4, PI 7.1 & SRM 7.01.
We have done all the configuration settings in ECC, PI & SRM.
PR created in ECC 6.0 and External source of Supply tab generated in PR, processed through SAP PI successfully to SRM 7.01. In SRM it showing an error trace as *Partner Ship-To address not found* . We are using ABAP Proxies and standard content for this PDP Scenario.Using PurchaseRequestERPSourcingRequest_Out as an outbound interface and PurchaseRequestERPSourcingRequest_In as Inbound interface. shopping cart is not getting created in SRM system. FEH is enabled in SRM system to trace the error.
Please provide inputs to resolve the issue.
Ashok

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

PARTNER SHIP_TO ADDRESS NOT FOUND problem in PDP---Please help

Hi all,
We are using the plan driven procurement to push our requirements using the RFC user.
When running the prgm "BBP_EXTREQ_TRANSFER" to transfer the PR to SRM it shows item transferred, but its getting stuck in the ques in 'SMQ1' transaction with a log saying
PARTNER SHIP_TO ADDRESS NOT FOUND.
Is there any need to maintain any other attributes for PDP user or RFC user in ECC or SRM,
please let me know.
I am waiting for the reply,
If you have any solution then please reply to this thread.
Regards
Santosh F.

Hi
Check this note is applicable for you or not
1101215 - External Requirements: Error transfering the hierarchy
items
Note Language: English Version: 2 Validity: Valid from 10.10.2007
Summary
Symptom
When transferring the purchase requisitions with hierarchy items, the ship
to address is not mapped properly. You get the error "No address found for
partner function type Ship-To Address". The purchase requisition gets stuck
in the outbound queue of backend
More Terms
BBP_EXTREQ_TRANSFER MAPV_PARTNER_FROM_EXT
Cause and Prerequisites
This is due to program error
Solution
Please implement the attached correction instructions or import the
corresponding support package.
Valid Releases
Software Component Release From
Release
To Release and Following
SRM_SERVER 550 550 550
Support Packages
Support Packages Release Package Name
SRM_SERVER 550 SAPKIBKT12
muthu

PARTNER PROCESSING OBJECT BUS2032 NOT FOUND WHILE CREATING SALES ORDER

Hi All,
I am not able to create a sales order it gives a Error "PARTNER PROCESSING OBJECT BUS2032 not found". Can any one inform me what could be a problem. Thanks in advance.

Yes, The Partner function SP is active.
We had a work around.
When the sales order was saved, being in Partner function Tab we got the error message. However when we returned to the Overview and saved the Order, we were through with the same. But, Iam not sure how could this happen.

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99220)

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

Internal error: Recipient address not found.return code : 80

Hi All,
I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
Status trans.met sender recipient send date send time status text
Red mark via. inter. john - 27.08.08 15:45:00 internal error: Recipient address not found.return code : 80
Need solution urgently.

Not in SCOT, If you read carefully i said,
setup the Relay Agent in your SMTP server
For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
Regards
Juan

Show Database Get "Object was not found"error

Hi there,
I have a weird situation here.
I created Data Guard Broker setup and show configuration return good result.
It is running for quite a while, and I can see if I switch log file on Primary, the Max Seq# is matched between Primary and Standby. Also do a lot of other test query all return good result.
But today when I happen to run Show Database command it says the DB object not found,
and there is no error in DRCxxx.log file.
Did I miss something? Any suggestions are appreciated.
===============Script===================
--Standby
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2R
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2R
--Primary
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2
-- primary
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2/dg1XXXPRD2.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2/dg2XXXPRD2.dat' scope=both;
-- standby
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2R/dg1XXXPRD2R.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2R/dg2XXXPRD2R.dat' scope=both;
-- primary
alter system set dg_broker_start=true scope=both;
-- standby
alter system set dg_broker_start=true scope=both;
-- primary
dgmgrl /
create configuration 'dg_XXXPRD2' as primary database is 'XXXPRD2' connect identifier is 'XXXPRD2';
add database 'XXXPRD2R' as connect identifier is 'XXXPRD2R' maintained as physical;
enable configuration;
===============Script===================
DGMGRL> show configuration
Configuration - dg_XXXPRD2
Protection Mode: MaxAvailability
Databases:
XXXPRD2 - Primary database
XXXPRD2R - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> SHOW DATABASE XXXPRD2
Object "XXXPRD2" was not found
DGMGRL> show database XXXPRD2R
Object "XXXPRD2R" was not found
-----------------------------------------------

Hello;
What I have noticed is sometimes single quotes count and sometime they don't.
Try :
SHOW DATABASE 'XXXPRD2';
Test
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show database standby
Object "standby" was not found
DGMGRL> show database 'standby';
Object "standby" was not found
DGMGRL> show database 'STANDBY';
Database - STANDBY
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   (unknown)
Apply Lag:
Real Time Query: OFF
Instance(s):
    STANDBYSo getting the case matters too.
DGMGRL> SHOW DATABASE STANDBY;
Object "standby" was not found
DGMGRL> Best Regards
mseberg
Edited by: mseberg on Jan 18, 2013 2:21 PM

Partner & Addresses not found for partner fxn Requester & Ship-To-Party

Hi Gurus,
We are in SRM 4.0
A purchaser is getting the following error message while trying to convert a approved SC to PO
Warning: No address data found
Error: No Addresses found for partner function type Requester
Error: Partner not found with partner function type Requester
Error: No Addresses found for partner function type Ship-To-Party
Error: Partner not found with partner function type Ship-To-Party
I've checked the Requester using BBP_CHECK_USERS to find that the user is consistent.
Any idea what might be causing this issue?
Kind regards,
MGS

Thanks for that. Following the tutorial very closely. we are trying to setup 3040 850. We have many successful 4010 850.
Still we continue to get same error. I have setup the new Business Action supporting 3040 standard, and believe all of my settings are correct according to tutorial and help files.
Am I looking at at bug?
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "CUSTOMER", To party[NAME] "US", Business action name "null";

Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

Hi
I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
Followed the following steps
    - Install Oracle 10.2.0.1.0
    - Install downloaded ERP 6.0 (Rapid Installer)
    - But this stopped with an error
        brconnect.exe - Entry Point Not Found
            The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
orauts.dll is oracle' client dll
When I checked BRTool' version using command
    *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
BR0651I BRTOOLS 7.00 (6)
Patch   Date     Info
release note               849483
kernel release             700
patch date                 2005-08-31
patch level                6
make platform              NTintel
make mode                  OCI_10103_SHARE
make date                  Sep 19 2005
Here make mode is "OCI_10103_SHARE"
Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
Is it error because of database version mismatch?
Thanks !
Ruhi Hira

Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

New Nano shows in source but file not found

This is really frustrating. My new nano starts to sync in I-tunes. IT will start to download my library then about a third of the way into it an error comes up that says "Nano can not be updated the required file can not be found". I've updated i-tunes, restored the Nano, even though it's new. It shows up on the I-tunes source list and in device manager. Then after I get the error of "file not found" I-tunes says update complete. When I disconnect the ipod, it's frozen on do not disconnect and I have to reset it.
Any ideas?

Hi,
Did you updated Latest CR_content and Cimsap?
If not download from SAP marketplace and update in SLD.
Regards,
Manivannan P

SRM 7.0: How to add Ship-to address ?

Hi Experts,
This is on SRM 7.0.
I have to add a new ship-to address in SRM 7.0.
When i log in as SRM ADMIN, i go to the transaction "Business Partner: Purchasing Company".
Here i have the options "Create Purchasing Company" , "Display" and "Edit"
The option "Create Purchasing Company" is alone open to execute, where as the other two options like "Display" and "Edit" are greyed out.
The table is also empty, even though we have Companies created in the system already.
Is there any setting required to bring up all the Companies in the table ? sothat i can Edit or Display ?
Please advice.
Thanks!

Harsha,
Edit and Display buttons will be active only when you select any purchasing company from the list that displayed when you choose Purchasing Companies. So in your case you do not have any Purchasing companies maintained and hence you were not able to view the companies.
To view the companies in the list you need to maintain a company in the Org structure.First choose an org unit and activate company check box under Function Tab and make sure BP# is generated by the system for this org unit. This will create a Purchasing company. Then logon to SRM portal and go to "Business Partner:Purchasing Company" and refresh the screen, you will see the company you just created. Select this and click Edit button that will open a new window. Go to Address Data tab and create new addresses and activate the check box Ship-to Address.
Hope this will help you.
Thanks,
Jagadish

Error in Installing Oracle 9i on redhat 7.2 -- jre was not found again!

I'm installing Oracle 9i on redhat 7.2. The machine I'm installing it on is an AMD k-6 500 mhz pc. While attempting to install Oracle 9i
I think I'm successful (well, maybe not) except for the fact that the oui reports the following error:
"configuration tool oracle net configuration assistant failed. jre was not found
in /home/ora1/jre/1.1.8/bin/../bin/i586/green_threads/jre"
Now, I know about the i686/i586 scenario, and I have a 586 pc. I got the more common error message:
"jre was not found in /tmp/OraInstall/jre/bin/i586/green_threads" (also for ../lib/..)
and I set up symbolic links for that and re-ran the runInstaller. Everything I've tried so far has been unsuccessfull.
Can anyone help? Thanks.
BTW: What does it mean when the path has double dots (i.e. bin/../bin) in it?. That confuses me a bit.

I had a similar problem when running jre in linux.
Any help really appreciated.
[root@Linux bin]# jre
jre was not found in /usr/local/bin/../bin/i686/green_threads/jre
[root@Linux bin]#
[root@Linux bin]# uname -a
Linux Linux 2.6.9-34.EL #1 Fri Feb 24 16:44:51 EST 2006 i686 i686 i386 GNU/Linux[root@Linux bin]#

QuickTime not found error when trying to run iTunes 64 bit on W7, QuickTime not found error when trying to run iTunes 64 bit on W7

I have quicktime installed on windows 7, 64 bit, and then installed the 64 bit version of iTunes. Install is successful, but when I try ot run iTunes, I get an error - "QuickTime was not found". Any suggestions?

I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.

ASA 5525, v9.1.2 - IPAA: Error freeing address ip-address, not found

Hello everybody!
The following problem:
VPN-dial-in on the ASA .
There are different VPN group policies , each with its own DHCP pool .
Authentication is performed by the AAA AD .
Everything works properly.
However, 3 users of a VPN group can not dial in . On the firewall then this error always comes in the log :
IPAA : Error freeing address 172.24.16.41 , not found
That address is nowhere else on the firewall , but was once assigned to a user . But this Network Object is deleted now.
The DHCP pool for this VPN Group goes from .33 to .63 .
I don not understand why the ASA always wants to take the .41 However, even if no one else is logged in via VPN .
No matter which one of the 3 users I take, the ASA always wants to assign the .41 .
For all the other users that are having no problem, it assumes a different IP from the pool.
I recreated the pool, created another pool and assigned that pool, I rebootet the ASA. No luck.
Also did a "clear arp".
No improvement .
Ideas ?
As I said, all other VPN groups and users have no problems.
ASA 5525 , v9.1.2
Thank You!

Problem solved.
The User is only allowed to be in one of the VPN-Groups in the ActiceDirectory.
Those 2 problem-users where in two VPN-groups.
So, problem fixed.

Error in SRM 7.01,Trace showing Partner Ship-To Address not found in FEH.

Similar Messages

Maybe you are looking for