Error in standard workflow 200000075

Hi Experts,
I know many people had a problem with the customizing of the standard workflow 200000075. I read all the posts, triple-checked the customizing and it is still not working
When I start my workflow (independent if I start it by creating a PO or by testing it manually) the status is set to "error" (can not see more information about this error).
Message no. WZ703
In the workflow log with technical details I can see following information:
          workflow created
          workflow started
error   exception occured
error   process_node
error   create
error   create wim_handle
error   create via WFM
error   evaluate_agent_via_rule
error   AC20000027
         Error Message Created for Admin
error  executing flow work item
error  executing flow work item
If I check the WF in transaction SWUD the Event raises the WF, it starts correct.
In transaction SWETYPV I created an entry for the BO BUS2012 realesestepcreated with my workflow and active linkage.
The WF Diagnosis (SWUD) tells me following:
WD:287 Task 'TS20000168' has no agent assignment.
Can anybody give me some help with this?
Thanks a lot,
Christoph

Dear Christoph,
As i understand that the Agent determination standard Rule  which you are using 20000027 is not working.
Behind this is a Function module ME_REL_GET_RESPONSIBLE which is being called.
For this you need to maintain entries in the tables T16FW and T16FC.
First you maintain the table <b>T16FC</b> in which you will maintain the
Release Group, Release Code,
Workflow Role - Here Space = No Role Resolution.
                                '1'       = Role Relevant for Workflow
                                '9'       = Role Resolution uses a User exit   
                                             EXIT_SAPLEBNF_001 for getting the Users.
I quote from the documentation available through custzomisng here
<i>The Workflow indicator is also used to control role resolution:
"1 - Role Resolution with Group, Code and Plant (T16FW)"
Here you use a role resolution that is supplied in the standard system. To do so, you must assign the release point in the section Workflow (see below).
"9 - Role Resolution via User Exit"
Here you use the customer exit M06E0005 to define a role resolution of your own</i>.
You need to maintain these through customising mode and the path is as follows :-
SPRO-> Materials Management-> Purchasing-> Purcahse Order-> Release Procedure for Purchase Orders-> Define Release Procedure for Purchase Orders.
You will also need to maintain the table T16FC through the customising process the same way as given above.
This should definitely solve your issue.
and in T16FW the entries need to have entries like
Release Group, Relese Code, Description,
OT = Here you need to give 'US' for user type
        'O' or organization
        'P' for Person
        'S' for a Position
        'C' for a Job
Agent ID = the agent id created through the Organizational object .
for e.g you can have
release group = X1
release code =C1
Description = 'Release one'
OT = 'US'
Agent ID = 'CHRISTOPH' - SAP User Id of a particular person
Hope this solves yyour issue
Thanks & Regards
Venugopal

Similar Messages

  • Error in PR standard workflow WS20000077

    Hi Friends ,
    I have activated the standard workflow WS20000077 which is for PR release procedures . When i am creating a PR it is triggering the workflow  with an error " Import container contains errors (are any obligatory elements missing?) " .
    I have checked the forum for the same error but i did not find ant exact solution for that .
    In SWEL , the  object key  is being populated by the  PR no . So i think this is the problem due to the Release code which is not getting any value in the event container after the  event " Releasestep craeted" gets triggered .
    So please guide me on the same how to resolve the above  error .
    I am using ECC 6 version of SAP .
    Thanks in advance
    Sarmistha

    Thanks again for your reply .
    I have tested the workflow in SWUE by assigning the Release code value manually and the workflow is triggering without any error .
    So as  you told i think some SAP Notes needs to  be implemented to resolve this issue .
    If you have any idea on this please guide .
    Thanks
    Sarmistha

  • Standard Workflow(Approve Document Change) in Error.

    Hi Experts,
    I have activated a standard workflow from IMG. It is a workflow for approval of Document change (WS21000093). I have assigned the agent as being the workflow initiator. After workflow is triggered, I've executed the work item (approve doc ) from my SAP inbox and it always goes into an error (Read last error).
    Can anyone suggest the cause of this error or how to debug this?
    Thanks a lot in advance.
    Regards,
    TM

    In the Workflow the Activity stepwhich is having the task TS2100021 in that Task method the below FM is not retruring SY-SUBRC as ZERO that's y it is going into that step check with the data that you are passing to the BOR method
    FKK_DOCUMENT_CHANGE_FROM_ID

  • How to activate the standard workflow :ws10000051

    hello,experts
        here is my problem:
        I want to activate the standard workflow for document parking :ws10000051 .
         I have already activate the event type linkage in SWE2.
        And then ,  i maintian  obwa , obwj , obwb, obwc, obwd.obwe,obwf.
         In obwa,i choose posting release  , subworkflow is ws10000055. 
        In obwe, Swf amnt rel  is  ws10000052.  
        In obwf , the org object is the position cfo (myself), before i assign this ,i create a position in ppoce.
       But, when i use f-65 to park a document ,  i can't receive any workflow in sbwp. I also find "the status of Document Parking (Frame), Parallel  is error " in my outbox.
       Can anyone tell me the reason ?
       Thanks !

    hi ,hari,
        you are right . when i check swel ,i  found ws10000051  : evnet put in the queue .  more detail message said :The OPEN_DI of BTE 00002214 could not determine any function modules.  
    when i check the workflow log (view with technical details), the activity :' determine subworkflow for amount release of document etermine subworkflow for amount release of docu ' status error . the message said :error in workflow customizing for document parkig (transaction obwe).
    i don't understand this , because i have already maintian  obwe. i made a new entry,like this:
    wrkf :1000   (workflow name)
    apth: 1000   (workflow approval path)
    ammont to : 9999999
    crcy: eur
    wsf amnt rel :ws10000052
    so ,could you tell me more details about this problem ,
    thanks

  • Error in GR workflow

    Hello all,
    when I create confirmation for line item in EBP, workflow is starting and Confirmation is in status "Awaiting Approval".
    I did not change standard workflows, only changed default currency to my own.
    As I see from workflow there are three conditions: completition status, value type and approver list.
    How can I fill ApproverList?
    TIA
    Gordan

    Hello Vadim,
    I tried to implemnt your proposal and included mine part in WS10400016 where amount is higher than 0.01.
    When I check Approval before confirming I can see "No Approval needed" but after posting message is: "No workflow started. Application error occured".
    In SLG1 message is "Workflow definition is inconsistent (NODES is initial)".
    Where I can set this "NODES"? Or workflow should do it automatically.

  • How to use standard workflows in my company?

    Hi Experts,
    I want to know how do i use standard workflows for my company. I have searched forum, but coudn't find proper answer. I have seen some standard workflow numbers(eg.WS12300111). But when i search for them it wont works. It will pop up "Choose Workflow Template" window. When i select the module there it opens up the empty folders.
    What is the meaning of this?
    Can i know what do i need to do for overcome this problem?
    Thanks,
    Rashika.

    Hello rashika ,
      To differentiate between standard and  custom workflows .
    All custom workflows would have first three digits lying betwee 900-999  ( called prefix number range )
    The number range 90000000 - 99999999  is reserved for customer developmen t and the range 00000000 - 89999999 is reserved for SAP.
    Or to  know precisely what exactly is the number range of  custom workflows in your system , check through tcode  OOW4.
    To help with your search in HR workflow , I am providing some -
    HR -OM
    WS01000014     Execute Designated Personnel Action
    WS01000038     Consolidate Headcount Planning
    WS01000039     Generate Headcount Planning
    WS01000040     Create Vacancy for Position
    WS01000041     Delimit Vacancy for Position
    WS01000043     Error in processing a vacancy
    WS01000077     Execute Designated Personnel Action
    WS01200136     Message New Employee in Department
    HR-PA
    WS00400077      Absence approval (asynchr. unlock)
    WS00400078     Handling of unapproved absence
    WS00400095      Display approved absence
    WS00400220      Preparations for start of work
    WS00400221      Choose letter
    WS00400222      Approve absence (sychr.unlock)
    WS01000015      ESS Plausibility check change of address
    WS01000036      ESS activities after hiring
    WS01200175      Entry due to country reassignment
    WS20000003      Pay increase approval with SAP forms
    WS20000015      Approve absence
    WS20000017      Determine basic pay items
    WS20000018      Resubmit postponed pay increase
    WS20000057      Find and Lock Employee
    HR-TM
    WS01000109     Cancel leave request
    WS01200003     Find and Lock Employee
    WS04200009     ESS Leave Request
    WS12300111     General Workflow for Documents
    WS12400004     ESS Leave Request Without Approval
    WS12400005     Cancel absence
    WS12400007     Cancel Absence Without Approval Step
    WS20000081     Leave Request with HTML
    HR-PY
    WS01000090      W-2 form reprint
    HR-BN
    WS01000001     Initial enrollment Benefits
    WS01000002     Create offer and inform employee
    WS01000003     Create adj. reason because of event
    WS01000009     Check if the employee is locked
    Thanks,
    sahiba

  • SAP Standard Workflow for REFUNDS in FS-CD

    Hi
    We have a requirement to implement SAP Workflow in Financial Services Collections & Disbursements (FS-CD) module for REFUNDS Approval.
    Is there any SAP standard Workflow available to meet the requirement?
    How to find the Standard SAP workflows available for different Modules (MM, SD, PM, FI, FS-CD etc)?
    Correct answers will be rewarded with points.
    Thanks
    Nikhil.B

    Just to add:
    The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
    Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

  • About ale error handling in workflow?

    Hi,
    can any one explian in detail ale error handling through workflow,its urgent for me.
    Regards,
    phani

    Hi Srikanth,
    follw the steps it will helpful u,
    Pre-requisites. 
    It is assumed that the reader of this article has some knowledge in SAP workflow BOR objects and ALE Idoc process like process code, Partner Profile etc. 
    Description 
    Here, we will be discussing in details the Error handling of an Inbound Idoc through triggering an event, which in turn will be triggering a workflow attached to the workflow. 
    Steps:-
    1.     Create custom BOR object with the events, Start and Stop event
    2.     Create a workflow for the error handling, like generating a notification whenever an error occurred in the Inbound Idoc.
    3.     Creation of Function Module and attachment with the Process Code
    4.     Create the settings for the Inbound Process of the Idoc through the Process Code.
    Creation of BOR objects. Go to the[http://www.****************/Tutorials/ALE/ErrorHandling/page3.htm] transaction SWO1. 
    Enter a name for the Object type and click ‘CREATE’ button for creating the custom BOR object. 
    Enter the details required for creating the BOR objects... 
    Create the Key fields and events of the BOR object.
    For creating the Key fields place the cursor on the Key fields and Click on the Create Button
    Create events for triggering the workflow and stopping the workflow.
    For creating the event place the cursor on the EVENTS and Click the create button like Key fields.
    Create two events.
    Enter the event name description etc and proceed further to create it. 
    Similarly create another event for ending the Workflow in the similar manner like that created earlier. 
    Now, Generate the BOR object through the generate button
    Release the EVENTS and subsequently release the BOR object. 
    After the creation of BOR object
    Create a workflow for the generation of notification whenever an error is reached in the Inbound Idoc.
    Execute the transaction SWDD. 
    Click on the CREATE button for creating the workflow for error handling. 
    Choose the Step type to be inserted for the notification like here we are using Send Mail option for sending a mail to the user whenever any error occurred.
    Activate the Workflow and test it whether it is working as per the requirement.
    After the successful completion it is required to attach the workflow with the event.
    Go to the Header section (Denoted by CAP).
    Go to the Start Events TAB.        
    Enter the details of the event with which the workflow should be linked like the category, BOR object type and the event with which that should be linked.
    Enter here the BOR object that has been created and give the name of event created for starting the workflow.
    Click on the Binding Button for generating the binding between the event and the workflow.
    Click on the Binding Button for generating the binding between the event and the workflow.
    Generate the binding and click OK button to save the binding.
    Click on Activate / deactivate button for activating the linkage.
    After the successful linkage the following sign will appear on the workflow..... 
    This shows that the workflow has been linked to the event and it will be triggered whenever that particular event will be triggered. 
    After the creation and successful linkage of workflow with the event it is required it is required to generate a function module and attached it to the process code. 
    Go to SE37 transaction and copy a standard process code function module to a custom one. Do no delete any parameters from the function module as the SAP standard program itself is calling this. 
    In that function module do the required validation and whenever the validation fails set a standard parameter ‘WORKFLOW_RESULT’ to 9999 from within the function module, otherwise normally proceed to set the status to 53.
    After the creation of function module it is required to attach it to the process code and corresponding attached to the message type at the Partner Profile stage.
    The process code is being created through the transaction WE42
    Go to the change mode and click the New Entries button for creating new process code. 
    Enter the Process Code Name, description and choose the processing type as Processing by function module. Click on the extension button of Identification.
    The details for the of the Process Code after clicking the identification button will be  
    Whenever idoc arrives into the Destination system then the standard SAP triggers the Process code attached to the Message type in the partner profile. The partner profile is being maintained in the transaction WE20. 
    Since, it is and inbound scenario so the message type and the corresponding process code will be maintained for the Inbound Parameters. 
    Click on Create Inbound Parameters button for creating new Inbound Message type and the corresponding message type. 
    Enter the process code for the corresponding message type. 
    Click SAVE button for saving the changes. 
    Whenever the IDOC arrives into the target system, it checks the partner profile and finds the corresponding process code. The process code is being linked with the function module through which the IDOC is required to be processed.
    Regards,
    Phani.

  • ALE: Error handling through workflow

    Hi All,
    My requirement is to trigger a workflow to send a mail when ever there is an error in posting an IDOC.
    I have created a FM, Business object, Process code and assigned FM & BO to it. created a workflow object and assigned BO object to it. I am getting mails too.
    But the problem here is I am getting mails to SAP inbox even the IDOC is posted successfully.
    I am setting the value WORKFLOW_RESULT = 99999 when IDOC posting fails.
    My requirement is to trigger workflow only when there is an error in posting IDOC.
    Please suggest.
    Thanks in advance,
    Prathap

    I think there are standard workflow for your requirement. Please check WE46 transaction code for the task.
    Thanks
    Arghadip

  • Move In Standard Workflow (ISUACBMOVEIN) : Automatic Owner Allocation Proc.

    Hello Experts,
    In the automatic owner allocation process, when we move out the tenant the owner is supposed to automatically move in with the pre-configured offset. In my case the workflow was not being triggerred so we defined the the linkage of the events (tcode: SWETYPV). After doing this we got an exception
    "Object MOVEINDOC method MOVEINOFOWNERCREATENODIALOG cannot be executed" with error EQ067 (Check the reference for move-in document &1). 
    When I see the standard workflow I see that it analyses Contract Account and verifies what category it belongs to Residential or not and splits it into two paths one for Residential and one for non residential. Then it passes through "template Movein Doc for". Here it provides a Move in Doc Reference as 000000004712 for non residential and 000000004711 for residential customers in a container operation.
    This is where the problem is. These donot exist in Move in / move out tables. So how do I approach now
    1) Is there any standard reference document already present in SAP system which can be configured?
    2) Do I have to copy the standard workflow and edit the template to give different reference document numbers?
    Or is there any other way to solve this issue?
    I really appreciate all the help i am getting from this forum so far.
    Thanks a lot.
    Vinay.

    Hi Vinjay,
      we are using different method to create a owner move-in MOVEINDOC->MDTMOVEINOWNER which doesn't required the reference.
      However, for your answer, you should check out these SAP help:
      http://help.sap.com/saphelp_rc10/helpdata/en/43/a7b39d823017b5e10000000a1553f6/content.htm
      http://help.sap.com/saphelp_rc10/helpdata/en/43/a24f89794e274ee10000000a422035/content.htm
    Regards,
    Chaiphon

  • Error in WS14000075: Workflow definition '' not in version ''

    Hi,
    We are getting the following error on our SRM 5.0 system while trying to approve the PO with 0step approval workflow: (in swud after running a consistency check on the workflow WS14000075)
    E WD:401 Workflow definition '' not in version ''
    We have already checked OSS Note 962488 and it did not resolve our problem. Besides we had a look at the forum Workflow without approval not working
    Awaiting your help

    Hi Emre,
    In our case the problem was in several confirmation standard workflows.
    In the workflow builder (SWDD) we use the navigation Area to check every workflow. I mean we did double click in each step, if the step had a subworkflow, then we open the subworhflow, checked it, and if it appeared the same error we used the function module for the subworkflow.
    In this way we achieved to solve the problem. I hope this helps you.
    BR.
    Jorge

  • SAP Standard Workflow for PR Release (with user exit)

    Hi SAP WF Gurus,
    Good day!
    I just wanted to check with you if you have ever used a user exit in the activation of the standard workflow for PR (overall ( release. What we have is a two0step approval process wherein each level has a proxy/alternate approver. We used the available user exit to accommodate this customer requirement since the standard release would only allow us to define 1 approver as a prerequisite for the next level. We were able to execute this on the first level approval; however, we observed that the workflow is not anymore triggered (i.e. does not send work items to agents) for the level 2 release. My questions therefore are:
    1. How to set up SWEC? I already executed SWELS and SWEL to check if the events are being created and event linkage is automatically deactivated after running into an error regarding the binding...My initial SWEC setup is for BANF BUS2105 RELEASED On Change. I am assuming that since the workflow was released from the first level, this should be the starting point
    2. How to rectify the binding error? I already executed automatic binding in the WF header for the start events but still face it
    Your inputs/comments are most welcome
    Regards,
    DeLo

    Just to add:
    The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
    Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

  • Activation of Standard Workflow (WS10000051)

    Hi
    We have identified a standard Workflow (WS10000051) for the Payment release in “FS-CD”
    Problem
    When I am trying to activate the same in IMG (PFTC) it is giving the error saying “Object not found”.
    Questions
    Is there any way to activate the same to get in PFTC Tcode?
    Is it required to activate all tasks associated to the workflow or else only if we activate the Workflow is it enough?
    I want to know how we can activate the workflow and what are all the steps required in configuration to start the standard workflow once the Business transaction triggered.
    Thanks
    Nikhil.B

    Hi ,
    we can use the transaciton code 'SWDD' to activate the workflow, give workflow number there. and click on the activate button on the applicaton tool bar.
    Thanks
    Anitha

  • Need HR-qualification related standard Tasks or standard Workflow templates

    Hi,
    i need HR-qualification related standard Tasks or standard Workflow templates available if any????
    My exact requirement is Whenever i am adding a qualification for an employee i need to start the workflow to send the approval
    request to the manager ..
    Immediate responses will be highly appreciated!.

    Hi venkatramana
       Look at this link
    [ALE EDI Error Handling via Workflow |https://wiki.sdn.sap.com/wiki/display/Snippets/ALEEDIErrorHandlingvia+Workflow]
    [Complete Guide to Learn ALE Error Handling Through Workflow and Implementation|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/609e6465-15de-2a10-859d-da7bcbca54a3&overridelayout=true]
    [https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e6769d90-0201-0010-848d-ae3c7bb18f8a]
    Please search the forum before posting.
    Regards
    vijay

  • Standard workflow template dose not contain rule responsiblities

    Hi Experts ,
    I am new to the workflow we are using standard workflow ws12300111 for leave request while executing the workflow it showing error 'No agent found' and rule 60100010 used to determine agents but it does not contain any responsiblities so shll we need to create responsiblities to find agents ?
    Pleas give your advices..
    Thanks
    Sreenath

    Hi experts ,
    We are using copied stadard leave request for UWL while executing error occured no agent i set task as genaral created responciblities and simulated for rule when i am giong through swi1 below steps i can see.
                          agent
    (green mark)rijesh                    (Sub)workflow created                    08.03.2012 15:01:37
    green mark)rijesh                    Workflow started                         08.03.2012 15:01:38
    (red mark) rijesh                    Exception occurred                       08.03.2012 15:01:40
    (red mark) rijesh                      START                                  08.03.2012 15:01:39
    (red mark) rijesh                        EVALUATE_SWITCH_CONDITIONS           08.03.2012 15:01:39
    (red mark) rijesh                          EVALUATE_CONDITION_COMPLEX         08.03.2012 15:01:40
    (red mark) rijesh                            GET_VALUE_ELEMENT                08.03.2012 15:01:40
    (red mark)rijesh                              EVAL_CONTAINER_ACCESS_CODE     08.03.2012 15:01:40
    (green mark)rijesh    Error Message Created for Admin          08.03.2012 15:01:42 Office Document Workflow 386151 set tostatus
    (red mark) rijesh                    Executing flow work item                 08.03.2012 15:01:42
    (red mark) rijesh                      Executing flow work item               08.03.2012 15:01:42
    Please advice .
    Regards
    Sreenath

Maybe you are looking for

  • ITunes no longer finding iOS devices

    All of sudden iTunes is no longer finding my iOS devices.  I have an iPhone 6 and an iPad Air 2.  I have connected both to my iMac running latest OS, using the lightning cable.  It worked fine till about an hour ago.  Now both devices keep prompting

  • I'm tearing my hair out. Got a new iphone went to sync and now all my iTunes playlists are missing. Please help

    Basically my iTunes playlists have gone missing. They were there yesterday and today I got a replacement iphone. I connected it to itunes and they were gone I was left with just 3 songs I had downloaded from the itunes store. I've read previous posts

  • Windows Small Business Server 2003- Cant successfully log in.  Suggestions?

    I have just acquired this iMAC for my daughter. I have been trying to connect to my server with frustrating results. From "connect to server" I successfully get the SMB/CIFS system authentication logon prompt. No matter what I try, I always get the m

  • Playstation 3 hardwired using fios

    I'm currently with cablevision and have my ps3 hardwired to a d-link wireless router which is connected to their modem. I have Verizon coming to set up fios and what I would like to know is can you still hardwire a ps3 the same way. We at one time tr

  • How to attach douments in ABAP

    Hello, I would to attach a document to a BOR object and can not find one simple way to do that. We are trying to ATTACH SOME DOCUMENTS with the customer contact information as reference. can some one help me? thanks.