Error in start asm

Hi,
I had a cluster distributed on three nodes: server09 (node1), server08(node2) and server07(node3).
I deleted erroneously many system files from server08 and now I need to start the cluster on the other nodes.
I started the server09 and server07 but the asm does not start.
I tried to execute this command but I receive:
[oracle@server09 ~]$ su -c "crsctl stop crs -f"
Password:
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'server09'
CRS-2673: Attempting to stop 'ora.crsd' on 'server09'
CRS-4548: Unable to connect to CRSD
CRS-2675: Stop of 'ora.crsd' on 'server09' failed
CRS-2679: Attempting to clean 'ora.crsd' on 'server09'
CRS-4548: Unable to connect to CRSD
CRS-2678: 'ora.crsd' on 'server09' has experienced an unrecoverable failure
CRS-0267: Human intervention required to resume its availability.
CRS-2795: Shutdown of Oracle High Availability Services-managed resources on 'server09' has failed
CRS-4687: Shutdown command has completed with error(s).
CRS-4000: Command Stop failed, or completed with errors.If I try to start asm I receiver:
[oracle@server09 ~]$ su -c "crsctl start crs"
Password:
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.Then I executed:
[oracle@server09 ~]$ crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.and
[oracle@server09 ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4533: Event Manager is onlinebut nothing.
What can I do?
I cannot use the server08 for some days so I need the cluster on on the other two instances.
Thanks a lot,
bye bye.

My oracle version is 11.2.0
in crsd.log I found:
2012-09-18 13:34:14.937: [ CSSCLNT][2795496160]clssscConnect: gipc request failed with 29 (0x16)
2012-09-18 13:34:14.937: [ CSSCLNT][2795496160]clsssInitNative: connect failed, rc 29
2012-09-18 13:34:14.937: [  CRSRTI][2795496160] CSS is not ready. Received status 3 from CSS. Waiting for good status .. The I received this executing cluvfy stage -post crsinst -n server07,server08,server09 -verbose:
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "server09"
  Destination Node                      Reachable?             
  server08                              no                     
  server07                              yes                    
  server09                              yes                    
Result: Node reachability check failed from node "server09"
WARNING:
These nodes cannot be reached:
     server08
Verification will proceed with nodes:
     server09,server07
Checking user equivalence...
Check: User equivalence for user "oracle"
  Node Name                             Comment                
  server09                              passed                 
  server07                              passed                 
Result: User equivalence check passed for user "oracle"
Checking time zone consistency...
Time zone consistency check passed.
ERROR:
Cluster manager integrity check failed
PRVF-5434 : Cannot identify the current CRS software version
UDev attributes check for OCR locations started...
Checking udev settings for device "/dev/mapper/mpath2p1"
  Device            Owner         Group         Permissions   Result         
PRVF-5184 : Check of following Udev attributes of "server09:/dev/mapper/mpath2p1" failed: "[Group: Found='root' Expected='oinstall', Permissions: Found='0600' Expected='0640']"
  Device            Owner         Group         Permissions   Result         
PRVF-5184 : Check of following Udev attributes of "server07:/dev/mapper/mpath2p1" failed: "[Group: Found='root' Expected='oinstall', Permissions: Found='0600' Expected='0640']"
Checking udev settings for device "/dev/mapper/mpath3p1"
  Device            Owner         Group         Permissions   Result         
PRVF-5184 : Check of following Udev attributes of "server09:/dev/mapper/mpath3p1" failed: "[Group: Found='root' Expected='oinstall', Permissions: Found='0600' Expected='0640']"
  Device            Owner         Group         Permissions   Result         
PRVF-5184 : Check of following Udev attributes of "server07:/dev/mapper/mpath3p1" failed: "[Group: Found='root' Expected='oinstall', Permissions: Found='0600' Expected='0640']"
Result: UDev attributes check failed for OCR locations
UDev attributes check for Voting Disk locations started...
ERROR:
PRVF-5197 : Failed to retrieve voting disk locations
Result: UDev attributes check failed for Voting Disk locations
Check default user file creation mask
  Node Name     Available                 Required                  Comment  
  server09      0022                      0022                      passed   
  server07      0022                      0022                      passed   
Result: Default user file creation mask check passed
Checking cluster integrity...
Cluster integrity check failed This check did not run on the following node(s):
     server09,server07
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations
Checking OCR config file "/etc/oracle/ocr.loc"...
OCR config file "/etc/oracle/ocr.loc" check successful
Checking OCR location "/dev/mapper/mpath2p1"...
Check for OCR location "/dev/mapper/mpath2p1" successful
Checking OCR location "/dev/mapper/mpath3p1"...
Check for OCR location "/dev/mapper/mpath3p1" successful
Checking OCR device "/dev/mapper/mpath2p1" for sharedness...
ERROR:
PRVF-4172 : Check of OCR device "/dev/mapper/mpath2p1" for sharedness failed
Could not find the storage
OCR integrity check failed
Checking CRS integrity...
ERROR:
PRVF-5316 : Failed to retrieve version of CRS installed on node "server09"
ERROR:
PRVF-5316 : Failed to retrieve version of CRS installed on node "server07"
ERROR:
PRVF-5305 : The Oracle clusterware is not healthy on node "server09"
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4533: Event Manager is online
ERROR:
PRVF-5305 : The Oracle clusterware is not healthy on node "server07"
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4533: Event Manager is online
CRS integrity check failed
Checking node application existence...
ERROR:
Could not retrieve static nodelist. Verification cannot proceed
Checking Single Client Access Name (SCAN)...
ERROR:
PRVF-5054 : Verification of SCAN VIP and Listener setup failed
PRCR-1068 : Failed to query resources
Cannot communicate with crsd
Checking Oracle Cluster Voting Disk configuration...
ERROR:
PRVF-5434 : Cannot identify the current CRS software version
PRVF-5431 : Oracle Cluster Voting Disk configuration check failed
Checking to make sure user "oracle" is not in "root" group
  Node Name     Status                    Comment                
  server09      does not exist            passed                 
  server07      does not exist            passed                 
Result: User "oracle" is not part of "root" group. Check passed
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
  Node Name                             Status                 
  server09                              failed                 
PRVF-9671 : CTSS on node "server09" is not in ONLINE state, when checked with command "/u01/app/11.2.0/grid2/bin/crsctl stat resource ora.ctssd -init"
  server07                              failed                 
PRVF-9671 : CTSS on node "server07" is not in ONLINE state, when checked with command "/u01/app/11.2.0/grid2/bin/crsctl stat resource ora.ctssd -init"
Result: PRVF-9672 : All nodes for which CTSS state was checked failed the check: Nodes: "server09"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.

Similar Messages

  • Getting errors while starting ASM instance in 11gR2

    Hi All,
    While starting ASM instance, i'm getting the following errors.
    [grid@xxxxx ~]$ . oraenv
    ORACLE_SID = [+ASM2] ?
    The Oracle base has been set to /u01/app/oracle
    [grid@xxxxx ~]$ sqlplus "/ as sysasm"
    SQL*Plus: Release 11.2.0.3.0 Production on Thu May 3 05:23:52 2012
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Connected.
    SQL> cl scr
    SQL> shut immediate
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 32 bytes of shared memory ("shared pool","unknown object","KGLH0^37a71565","kglHeapInitialize:temp")
    Please give me any suggestions?
    --Thanks,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    http://ora-04031.ora-code.com/
    ORA-04031:
    unable to allocate string bytes of shared memory ("string","string","string","string")
    Cause:     More shared memory is needed than was allocated in the shared pool.
    Action:     If the shared pool is out of memory, either use the dbms_shared_pool package to pin large packages, reduce your use of shared memory, or increase the amount of available shared memory by increasing the value of the INIT.ORA parameters "shared_pool_reserved_size" and "shared_pool_size". If the large pool is out of memory, increase the INIT.ORA parameter "large_pool_size".

  • Error while starting ASM instance

    when i was trying to startup my ASM database , i was getting the following error.
    SQL> startup
    ASM instance started
    Total System Global Area 125829120 bytes
    Fixed Size 2019000 bytes
    Variable Size 98644296 bytes
    ASM Cache 25165824 bytes
    ORA-15032: not all alterations performed
    ORA-15003: diskgroup "DBDATA" already mounted in another lock name space"
    thnx in advance

    Hi,
    i was not aware of ASM anymore, i can give some more details of this.
    There was already an instance named +ASM in the host, which has the diskgroup 'DBDATA' created.
    But now i have created a new instance and i was trying to connect to the same diskgroup.
    I dont have permission of the root, but i have the oracle login.
    could u pleaze help me in this regard...
    i need to connect to the diskgroup, if i try to stop the other instance, i was not getting the error, but the diskgroup is getting dis-mounted.
    thnx alot for the replies

  • Errors starting ASM

    Dear All,
    We have databases running on RAC with 2 nodes. Late this afternoon, the entire system crashed! While still trying to determine what caused such a crash, we are trying to bring up the systems. We did a reboot and crs came back online. We then tried to startup the ASM on the first node, but encountered the following errors:
    PRKS-1009 : Failed to start ASM instance "+ASM1" on node "balt-bannerdb1", [balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL*Plus: Release 10.2.0.2.0 - Production on Thu Mar 5 22:36:29 2009
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:Enter user-name: Connected to an idle instance.
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL> ORA-03113: end-of-file on communication channel
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:SQL> Disconnected
    balt-bannerdb1:ora.balt-bannerdb1.ASM1.asm:
    CRS-0215: Could not start resource 'ora.balt-bannerdb1.ASM1.asm'.] Does anyone know what is going on here?
    Thanks!

    Hi,
    there is similar article. maybe you can try this suggestions:
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=851576
    Regards,
    Tom
    http://oracledba.cz

  • Problem starting ASM on non-RAC environment on HP-UX 11.11

    I am trying to start ASM on single node running multiple database as I am planning to test setting up on of the db files with ASM.
    Wen I tried to start the ASM after I created the init+ASM.ora and exported the ORACLE _SID to +ASM; I got the error below;
    SQL> startup
    ORA-29701: unable to connect to Cluster Manager
    I realized the css was down and I tried to start without much success as shown below; by the way, the ASM home is the same as the Oracle 10g (10.2.0.3) binaries home.
    # $ORACLE_HOME/bin/localconfig add
    clscfg: EXISTING configuration version 3 detected.
    clscfg: version 3 is 10G Release 2.
    Successfully accumulated necessary OCR keys.
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Configuration for local CSS has been initialized
    Failed configure CSS. Fix the problem and rerun this script from destination Oracle home with 'reset' argument
    # $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
    # $ORACLE_HOME/bin/crsctl set css misscount 600
    Failure 32 in main OCR context initialization: PROC-32: Cluster Ready Services on the local node is not running Messaging error [9]
    Please advice

    This is what I get when I run the localconfig add
    # $ORACLE_HOME/bin/localconfig add
    clscfg: EXISTING configuration version 3 detected.
    clscfg: version 3 is 10G Release 2.
    Successfully accumulated necessary OCR keys.
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Configuration for local CSS has been initialized
    Failed configure CSS. Fix the problem and rerun this script from destination Oracle home with 'reset' argument

  • CRS-0210: Could not find resource while start ASM on 10G RAC

    Dear All
    I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
    ORA-03113: end-of-file on communication channel
    select value from v$parameter where name='instance_type'
    ERROR at line 1:
    ORA-01034: ORACLE not available
    This seems to be due to a failure CRS. The trace file shows:
    [Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
    [Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
    Executing
    /u01/app/oracle/product/10.2.0/crs/bin/crs_stat
    produces:
    NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on bfhxx-sql012
    NAME=ora.bfhxx-sql012.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on bfhxx-sql012
    NAME=ora.bfhxx-sql012.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on bfhxx-sql012
    NAME=ora.bfhxx-sql012.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on bfhxx-sql012
    Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
    Many thanks
    Paul

    It all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
    -Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
    If the above does not work
    -Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
    Always a good practise to take a backup of status quo before you restore from the backups.
    It would be interesting to know what lead to your disk mapping problem in the first palce.
    Good Luck!

  • Can't start ASM,help me

    Help I can't start ASM on rhel4(32bit) + oracle 10G 10.2 RAC
    Wed Jun 28 17:10:40 2006
    Error: KGXGN polling error (15)
    Wed Jun 28 17:10:40 2006
    Errors in file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_24375.trc:
    ORA-29702: error occurred in Cluster Group Service operation
    LMON: terminating instance due to error 29702
    Wed Jun 28 17:10:40 2006
    Dump system state for local instance only
    System State dumped to trace file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_diag_24363.trc
    Wed Jun 28 17:10:40 2006
    Trace dumping is performing id=[cdmp_20060628171040]
    Wed Jun 28 17:10:41 2006
    Shutting down instance (abort)
    License high water mark = 2
    Wed Jun 28 17:10:45 2006
    Instance terminated by LMON, pid = 24375
    Wed Jun 28 17:10:46 2006
    Instance terminated by USER, pid = 29540
    Wed Jun 28 17:10:47 2006
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    WARNING: No cluster interconnect has been specified. Depending on
    the communication driver configured Oracle cluster traffic
    may be directed to the public interface of this machine.
    Oracle recommends that RAC clustered databases be configured
    with a private interconnect for enhanced security and
    performance.
    Picked latch-free SCN scheme 2
    Using LOG_ARCHIVE_DEST_1 parameter default value as /oracle/product/10.2.0/db/dbs/arch
    Autotune of undo retention is turned off.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    large_pool_size = 12582912
    spfile = /dev/raw/raw3
    instance_type = asm
    cluster_database = TRUE
    instance_number = 1
    remote_login_passwordfile= EXCLUSIVE
    background_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/bdump
    user_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/udump
    core_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/cdump
    asm_diskgroups =
    Cluster communication is configured to use the following interface(s) for this instance
    203.144.222.81
    Wed Jun 28 17:10:48 2006
    cluster interconnect IPC version:Oracle UDP/IP
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=29735
    DIAG started with pid=3, OS id=29737
    PSP0 started with pid=4, OS id=29739
    LMON started with pid=5, OS id=29741
    LMD0 started with pid=6, OS id=29743
    LMS0 started with pid=7, OS id=29745
    MMAN started with pid=8, OS id=29755
    DBW0 started with pid=9, OS id=29757
    LGWR started with pid=10, OS id=29759
    CKPT started with pid=11, OS id=29761
    SMON started with pid=12, OS id=29763
    RBAL started with pid=13, OS id=29765
    GMON started with pid=14, OS id=29767
    Wed Jun 28 17:10:48 2006
    lmon registered with NM - instance id 1 (internal mem no 0)
    Wed Jun 28 17:12:59 2006
    Error: KGXGN polling error (15)
    Wed Jun 28 17:12:59 2006
    Errors in file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_29741.trc:
    ORA-29702: error occurred in Cluster Group Service operation
    LMON: terminating instance due to error 29702
    Wed Jun 28 17:13:01 2006
    Shutting down instance (abort)
    License high water mark = 1
    Wed Jun 28 17:13:03 2006
    Instance terminated by LMON, pid = 29741
    and trace file
    /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_29741.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    ORACLE_HOME = /oracle/product/10.2.0/db
    System name: Linux
    Node name: aadb01
    Release: 2.6.9-34.ELsmp
    Version: #1 SMP Fri Feb 24 16:54:53 EST 2006
    Machine: i686
    Instance name: +ASM1
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 5
    Unix process pid: 29741, image: oracle@aadb01 (LMON)
    *** SERVICE NAME:() 2006-06-28 17:10:48.174
    *** SESSION ID:(46.1) 2006-06-28 17:10:48.174
    GES resources 1890 pool 4
    GES enqueues 2510
    GES IPC: Receivers 2 Senders 2
    GES IPC: Buffers Receive 1000 Send (i:830 b:830) Reserve 81
    GES IPC: Msg Size Regular 388 Batch 4096
    Batching factor: enqueue replay 99, ack 110
    Batching factor: cache replay 71 size per lock 56
    kjxggin: receive buffer size = 32768
    *** 2006-06-28 17:10:48.509
    kjxgmrcfg: Reconfiguration started, reason 1
    kjxgmcs: Setting state to 0 0.
    *** 2006-06-28 17:10:48.509
    Name Service frozen
    kjxgmcs: Setting state to 0 1.
    kjfcpiora: published my fusion master weight 5622
    kjfcpiora: publish my flogb 9
    *** 2006-06-28 17:11:53.883
    =====================================================
    kjxgmpoll: CGS state (0 1) start 0x635d41bb cur 0x672b6877 diff 0x3ce26bc
    =====================================================
    Group name: +ASM
    Member id: 0
    Cached KGXGN event: 0
    Group State:
    State: 0 1
    Reconfig started start-tm 0x635d4173 tmout period 0x7270e00
    Commited Map: 0 1
    New Map: 0 1
    KGXGN Map: 0 1
    Master node: 0
    Memcnt 0 Rcvcnt 0
    Substate Proposal: false
    Inc Proposal:
    incarn 1 memcnt 2 master 0
    proposal true matched false
    map: 0 1
    Master Inc State:
    incarn 1 memcnt 2 agrees 1 flag 0xa
    wmap: 1
    nmap: 0 1
    ubmap:
    Substate Handler Execution State
    substate 0 status done
    substate 1 status done
    substate 2 status done
    substate 3 status done
    substate 4 status done
    substate 5 status done
    substate 6 status done
    *** 2006-06-28 17:12:59.243
    =====================================================
    kjxgmpoll: CGS state (0 1) start 0x635d41bb cur 0x6af9582a diff 0x79c166f
    =====================================================
    Group name: +ASM
    Member id: 0
    Cached KGXGN event: 0
    Group State:
    State: 0 1
    Reconfig started start-tm 0x635d4173 tmout period 0x7270e00
    Commited Map: 0 1
    New Map: 0 1
    KGXGN Map: 0 1
    Master node: 0
    Memcnt 0 Rcvcnt 0
    Substate Proposal: false
    Inc Proposal:
    incarn 1 memcnt 2 master 0
    proposal true matched false
    map: 0 1
    Master Inc State:
    incarn 1 memcnt 2 agrees 1 flag 0xa
    wmap: 1
    nmap: 0 1
    ubmap:
    Substate Handler Execution State
    substate 0 status done
    substate 1 status done
    substate 2 status done
    substate 3 status done
    substate 4 status done
    substate 5 status done
    substate 6 status done
    kjxgmpoll: terminate the CGS reconfig.
    Error: KGXGN polling error (15)
    error 29702 detected in background process
    ORA-29702: error occurred in Cluster Group Service operation
    ksuitm: waiting for [5] seconds before killing DIAG

    Modify the classpath as follows.
    set JAVA_HOME=C:\JDK1.3.1
    set ANT_HOME=C:\jakarta-tomcat
    set TOMCAT_HOME=C:\jakarta-tomcat
    set CLASSPATH=%CLASSPATH%;C:\jdk1.3.1\lib\tools.jar;JAVA_HOME\lib;
    Modify the Path as follows
    set PATH = %PATH%;%JAVA_HOME%\bin;%TOMCAT_HOME%\bin

  • Getting error while starting the RAC instance through SRVCTL utility

    Hi DBA's,
    We are getting the below error while starting the Orcale 10g RAC instance on one of the node thru SRVCTL:
    oracle:/home/oracle]>srvctl start instance -d SQLTSTM2 -i SQLTSTM21
    PRKP-1001 : Error starting instance SQLTSTM21 on node r1racd
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.SQLTSTM2.SQLTSTM21.inst' has placement error.
    :oracle:/home/oracle]>
    srvctl status database -d SQLTSTM2
    PRKO-2015 : Error in checking condition of instance on node: r1racd
    Instance SQLTSTM22 is running on node r2racd
    oracle:/opt/oracle/product/10.2.0/db]>
    NOTE: but i am able to start the instance thru SQLPLUS.
    After starting the instance thru SQLPLUS i checked the CRS_STAT -t . It shows the status offline... Please find the details below:
    Name Type Target State Host
    ora....21.inst application OFFLINE OFFLINE
    ora....22.inst application ONLINE ONLINE r2racd
    ora....VLM2.db application ONLINE ONLINE r2racd
    ora....21.inst application ONLINE ONLINE r1racd
    ora....22.inst application ONLINE ONLINE r2racd
    ora....STM2.db application ONLINE ONLINE r2racd
    ora....SM1.asm application ONLINE ONLINE r1racd
    ora....CD.lsnr application ONLINE ONLINE r1racd
    ora.r1racd.gsd application ONLINE ONLINE r1racd
    ora.r1racd.ons application ONLINE ONLINE r1racd
    ora.r1racd.vip application ONLINE ONLINE r1racd
    ora....SM2.asm application ONLINE ONLINE r2racd
    ora....CD.lsnr application ONLINE ONLINE r2racd
    ora.r2racd.gsd application ONLINE ONLINE r2racd
    ora.r2racd.ons application ONLINE ONLINE r2racd
    ora.r2racd.vip application ONLINE ONLINE r2racd
    Thanks in advance...
    Anil

    Use the 'srvctl config database -d ' command to check if the instance has been configured in the Oracle Cluster Registry; make sure that the GSDs are running on each node in the cluster.
    Also refere to Metalink note 295328.1

  • Failed to start ASM instance "+ASM1" on node "rac1"

    I have a problem, because when I start RAC and write command crs_stat -t
    column State have 2 wrong parameter..
    Name Type Target State Host
    ora.....CRM.cs application ONLINE ONLINE rac2
    ora....db1.srv application ONLINE ONLINE rac2
    ora.devdb.db application ONLINE ONLINE rac2
    ora....b1.inst application ONLINE OFFLINE
    ora....b2.inst application ONLINE ONLINE rac2
    ora....SM1.asm application ONLINE UNKNOWN rac1
    ora....C1.lsnr application ONLINE ONLINE rac1
    ora.rac1.gsd application ONLINE ONLINE rac1
    ora.rac1.ons application ONLINE ONLINE rac1
    ora.rac1.vip application ONLINE ONLINE rac1
    ora....SM2.asm application ONLINE ONLINE rac2
    ora....C2.lsnr application ONLINE ONLINE rac2
    ora.rac2.gsd application ONLINE ONLINE rac2
    ora.rac2.ons application ONLINE ONLINE rac2
    ora.rac2.vip application ONLINE ONLINE rac2
    When I try
    srvctl start asm -n rac1 then is wrong:
    PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
    [PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.rac1.ASM1.asm' has placement error.]]
    and when I try start instance manualy then
    PRKP-1001 : Error starting instance devdb1 on node rac1
    CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.devdb.devdb1.inst' has placement error.
    :( Where is my problem??

    hi, i have exactly the same error
    but your suggestions of remove an recreate the asm resource not working
    ./srvctl remove asm -n dbs2 -i +ASM2 -f
    PRKS-1023 : Failed to remove CRS resource for ASM instance "+ASM2" on node "dbs2", [CRS-0214: Could not unregister resource 'ora.dbs2.ASM2.asm'.]
    ./srvctl start asm -n dbs2
    PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
    [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "dbs2", [CRS-1028: Dependency analysis failed because of:
    CRS-0223: Resource 'ora.dbs2.ASM2.asm' has placement error.]]
    how do i proceed?
    iam using solaris 10 with t2000 and t5210 server and oracle 10.2.0.4

  • Error when starting Weblogic server with Coherence

    We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
    <Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
    <Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
    <Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
    CONFIGURATION:
    We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>*</cache-name>
    <scheme-name>distributed</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <distributed-scheme>
    <scheme-name>distributed</scheme-name>
    <service-name>DistributedCache</service-name>
    <backing-map-scheme>
    <local-scheme></local-scheme>
    </backing-map-scheme>
    <autostart>true</autostart>
    </distributed-scheme>
    </caching-schemes>
    </cache-config>
    We also have tangosol-coherence-override.xml in the same dir:
    <coherence>
    <cluster-config>
    <member-identity>
    <cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
    </member-identity>
    </cluster-config>
    <configurable-cache-factory-config>
    <class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
    <init-params>
    <init-param>
    <param-type>java.lang.String</param-type>
    <param-value>epcis-coherence-cache-config.xml</param-value>
    </init-param>
    </init-params>
    </configurable-cache-factory-config>
    <license-config>
    <edition-name system-property="tangosol.coherence.edition">SE</edition-name>
    <license-mode system-property="tangosol.coherence.mode">dev</license-mode>
    </license-config>
    </coherence>
    We have modified startWebLogic.sh by adding:
    PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"

    As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
    This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
    <cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK

  • Error while starting weblogic server

    Hi, I am getting following error while starting weblogic server
    Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
    Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
    Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
    java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
    at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
    at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
    Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
    jdk 1.31
    TIA
    Ashwani

    Hi,
    1)Could you please try logging into sqlplus using using the below command :-
        sqlplus "/ as sysdba"
    2)Execute the below command to check if the password in expired :-
      select username, account_status, expiry_date, where username='MDS username';
    3)Change the password if the password has been expired by following the below command :-
       alter user <user> identified by <password>;
    4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
        + Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
        + Restart the Weblogic once again.
    5)Lets us know the result.
    Regards,
    Prakash.

  • Error in starting SPLService on Tomcat

    Hi,
    I get an error while starting CC&B v2.1.0 installed at my local machine on Tomcat. Hereunder is the SPL.log :
    - 10:32:37,953 [main] INFO (web.startup.SPLWebStartup) Initializing SPL web application
    - 10:32:37,953 [main] INFO (shared.context.ApplicationMode) Application is running web-based
    - 10:32:37,953 [main] INFO (shared.context.ApplicationMode) Application set to production mode
    - 10:32:38,031 [main] INFO (web.dynamicui.TransformServletHelper) Disable UIPage Compression set to false
    - 10:32:38,968 [main] INFO (support.context.ContextFactory) Creating default context
    - 10:32:39,093 [main] INFO (shared.environ.ApplicationProperties) loaded properties from resource spl.properties: {spl.runtime.service.extraInstallationServices=CILTINCP, spl.runtime.cobol.remote.jvmcommand=D:/CCB_Install/jdk1.5.0_09/bin/java.exe, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.cobol.remote.jvmcount=1, spl.runtime.socket.file.dir=D:/ccbenv/ccbdemo/runtime, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.cobol.cobrcall=false, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.disableQueryCache=false, spl.runtime.utf8Database=true, spl.runtime.cobol.remote.jvmoptions=-Xmx156m -server -Dfile.encoding=ISO8859_1 -cp D:/ccbenv/ccbdemo/splapp/standalone/config;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-beanutils-1.6.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-codec-1.3.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-collections-2.1.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-fileupload-1.1.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-httpclient-2.0.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-io-1.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-lang-2.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-logging-1.0.4.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/concurrent-1.3.4.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/dom4j-1.6.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/hibernate-3.1.3.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/icu4j-3.6.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jaxen-1.1-beta-11.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jta.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jtds-1.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/log4j-1.2.11.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/mfcobol.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-base-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-shared-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-xai-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/xstream-1.2.1.jar, spl.runtime.environ.init.dir=D:/ccbenv/ccbdemo/etc, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.oracle.statementCacheSize=300, spl.runtime.cobol.remote.rmiStartPort=5503, spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.runtime.cobol.remote.jvm=true, spl.runtime.sql.highValue=}
    - 10:32:47,140 [main] WARN (shared.environ.ContextManagedObjectSet) Could not load resource com/splwg/cm/domain/contextManagedObjects.xml on classpath. This may be harmless but could mean a problem with the classpath. Please verify that the classpath for application cm is correctly configured.
    - 10:33:12,234 [main] INFO (support.context.ContextFactory) Registering lookups
    - 10:33:12,593 [main] INFO (support.context.ContextFactory) 480 lookups registered, time 348.717 ms
    - 10:33:12,593 [main] INFO (support.context.ComponentContainerLookupHelper) Initializing constants on 505 lookup interface classes
    - 10:33:13,187 [main] INFO (support.context.ComponentContainerLookupHelper) Done initializing lookup constants, time 594.028 ms
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) Registering algorithm spots
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) 99 algorithm spots registered, time 0.168 ms
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) Registering algorithm components
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) 46 algorithm components registered, time 0.045 ms
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) Registering batch jobs
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) 13 batch jobs registered, time 0.036 ms
    - 10:33:13,187 [main] INFO (support.context.ContextFactory) Registering Entities
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) 812 entities registered, time 2,320.145 ms
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) Registering Components
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) 227 components registered, time 1.367 ms
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) Registering Change Handlers
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) 200 handlers registered, time 0.386 ms
    - 10:33:15,515 [main] INFO (support.context.ContextFactory) Registering Services
    - 10:33:15,671 [main] INFO (support.context.ContextFactory) 313 services registered, time 158.694 ms
    - 10:33:15,671 [main] INFO (support.context.ContextFactory) Registering Code Description queries
    - 10:33:15,687 [main] INFO (support.context.ContextFactory) 40 code/description queries registered, time 0.060 ms
    - 10:33:15,687 [main] INFO (support.context.ContextFactory) Registering cobol programs
    - 10:33:16,140 [main] INFO (support.context.ContextFactory) 187 cobol copybooks registered, time 455.640 ms
    - 10:33:16,140 [main] INFO (support.context.ContextFactory) Registering cobol programs
    - 10:33:16,140 [main] INFO (support.context.ContextFactory) 39 cobol programs registered, time 0.048 ms
    - 10:33:16,140 [main] INFO (support.context.ApplicationContext) Building hibernate configuration
    - 10:33:16,687 [main] INFO (support.context.ApplicationContext) Adding 812 hibernate mappings
    - 10:33:17,640 [main] INFO (support.context.ApplicationContext) Added 100 mappings
    - 10:33:18,250 [main] INFO (support.context.ApplicationContext) Added 200 mappings
    - 10:33:19,015 [main] INFO (support.context.ApplicationContext) Added 300 mappings
    - 10:33:19,609 [main] INFO (support.context.ApplicationContext) Added 400 mappings
    - 10:33:20,562 [main] INFO (support.context.ApplicationContext) Added 500 mappings
    - 10:33:21,140 [main] INFO (support.context.ApplicationContext) Added 600 mappings
    - 10:33:21,734 [main] INFO (support.context.ApplicationContext) Added 700 mappings
    - 10:33:22,343 [main] INFO (support.context.ApplicationContext) Added 800 mappings
    - 10:33:22,406 [main] INFO (support.context.ApplicationContext) Added 812 mappings
    - 10:33:22,500 [main] INFO (support.context.ApplicationContext) Done building hibernate configuration, time 6,351.886 ms
    - 10:33:22,500 [main] INFO (support.context.ApplicationContext) Building hibernate session factory
    - 10:33:24,218 [main] INFO (hibernate.connection.ConnectionProviderFactory) Initializing connection provider: org.hibernate.connection.C3P0ConnectionProvider
    - 10:33:24,218 [main] INFO (hibernate.connection.C3P0ConnectionProvider) C3P0 using driver: oracle.jdbc.driver.OracleDriver at URL: jdbc:oracle:thin:@localhost:1521:etmdemo
    - 10:33:24,218 [main] INFO (hibernate.connection.C3P0ConnectionProvider) Connection properties: {user=ccbuser, password=****}
    - 10:33:24,218 [main] INFO (hibernate.connection.C3P0ConnectionProvider) autocommit mode: false
    - 10:33:24,234 [main] INFO (v2.log.MLog) MLog clients using log4j logging.
    - 10:33:24,640 [main] INFO (v2.c3p0.C3P0Registry) Initializing c3p0-0.9.0.4 [built 23-January-2006 22:20:29 -0500; debug? true; trace: 10]
    - 10:33:24,812 [main] INFO (v2.c3p0.PoolBackedDataSource) Initializing c3p0 pool... com.mchange.v2.c3p0.PoolBackedDataSource@215748 [ connectionPoolDataSource -> com.mchange.v2.c3p0.WrapperConnectionPoolDataSource@100269d [ acquireIncrement -> 1, acquireRetryAttempts -> 30, acquireRetryDelay -> 1000, autoCommitOnClose -> false, automaticTestTable -> null, breakAfterAcquireFailure -> false, checkoutTimeout -> 0, connectionTesterClassName -> com.mchange.v2.c3p0.impl.DefaultConnectionTester, factoryClassLocation -> null, forceIgnoreUnresolvedTransactions -> false, identityToken -> 100269d, idleConnectionTestPeriod -> 0, initialPoolSize -> 1, maxIdleTime -> 300, maxPoolSize -> 150, maxStatements -> 0, maxStatementsPerConnection -> 0, minPoolSize -> 1, nestedDataSource -> com.mchange.v2.c3p0.DriverManagerDataSource@56be4e [ description -> null, driverClass -> null, factoryClassLocation -> null, identityToken -> 56be4e, jdbcUrl -> jdbc:oracle:thin:@localhost:1521:etmdemo, properties -> {user=******, password=******} ], preferredTestQuery -> null, propertyCycle -> 300, testConnectionOnCheckin -> false, testConnectionOnCheckout -> false, usesTraditionalReflectiveProxies -> false ], factoryClassLocation -> null, identityToken -> 215748, numHelperThreads -> 3 ]
    - 10:33:26,296 [main] INFO (hibernate.dialect.Dialect) Using dialect: org.hibernate.dialect.Oracle9Dialect
    - 10:33:26,312 [main] INFO (hibernate.transaction.TransactionFactoryFactory) Transaction strategy: org.hibernate.transaction.JDBCTransactionFactory
    - 10:33:26,312 [main] INFO (hibernate.transaction.TransactionManagerLookupFactory) No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
    - 10:33:26,343 [main] INFO (hibernate.impl.SessionFactoryImpl) building session factory
    - 10:33:36,812 [main] INFO (hibernate.impl.SessionFactoryObjectFactory) Not binding factory to JNDI, no JNDI name configured
    - 10:33:36,812 [main] INFO (support.context.ApplicationContext) Done building hibernate session factory, time 14,318.045 ms
    - 10:33:37,484 [main] INFO (support.sql.OracleFunctionReplacer) Oracle driver statement cache enabled with size of 300
    - 10:33:37,531 [main] INFO (support.context.ApplicationContext) Database: Oracle, version: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    - 10:33:37,531 [main] INFO (support.context.ApplicationContext) JDBC driver: Oracle JDBC driver, version: 10.2.0.1.0
    - 10:33:38,828 [main] INFO (support.context.ApplicationContext) System owner is: 'CM '
    - 10:33:39,328 [main] INFO (cobol.host.CobolHostStartup) Using provided java command for remote cobol execution: D:/CCB_Install/jdk1.5.0_09/bin/java.exe
    - 10:33:39,328 [main] INFO (cobol.host.CobolHostStartup) Using provided java command options for remote cobol execution: -Xmx156m -server -Dfile.encoding=ISO8859_1 -cp D:/ccbenv/ccbdemo/splapp/standalone/config;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-beanutils-1.6.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-codec-1.3.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-collections-2.1.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-fileupload-1.1.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-httpclient-2.0.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-io-1.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-lang-2.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/commons-logging-1.0.4.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/concurrent-1.3.4.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/dom4j-1.6.1.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/hibernate-3.1.3.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/icu4j-3.6.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jaxen-1.1-beta-11.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jta.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/jtds-1.2.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/log4j-1.2.11.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/mfcobol.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-base-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-shared-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/spl-xai-2.1.0.jar;D:/ccbenv/ccbdemo/splapp/standalone/lib/xstream-1.2.1.jar
    - 10:33:39,343 [main] INFO (cobol.host.CobolHostStartup) Using starting port number 5503 for remote cobol execution.
    - 10:33:40,031 [main] INFO (cobol.host.SocketStrategy) Socket strategy set to com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy
    - 10:33:41,171 [main] INFO (cobol.host.CobolHostStartup) Using active JVM count of 1 for remote cobol execution.
    *-  10:34:03,203 [main] ERROR (cobol.host.SocketStrategy) Unable to establish connection on port 5506 after waiting 20 seconds.*
    java.net.ConnectException: Error: Could not open pipe
    caused by system error: The system cannot find the file specified.
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.connectToPipe(Native Method)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.<init>(WindowsPipeSocket.java:63)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.createSocket(WindowsPipeSocket.java:100)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.connect(WindowsPipeSocket.java:95)
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy.openSocket(WindowsPipeSocketStrategy.java:32)
         at com.splwg.base.support.cobol.host.SocketStrategy.unsafeOpen(SocketStrategy.java:118)
         at com.splwg.base.support.cobol.host.SocketStrategy.open(SocketStrategy.java:103)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.createNewHolder(OptimizedRemoteExecuterStub.java:162)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.getStreamHolder(OptimizedRemoteExecuterStub.java:125)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.invoke(OptimizedRemoteExecuterStub.java:46)
         at com.splwg.base.support.cobol.host.RemoteRunnerImpl.invoke(RemoteRunnerImpl.java:89)
         at com.splwg.base.support.cobol.host.RemoteJVMConnectionImpl.createRemoteRunner(RemoteJVMConnectionImpl.java:148)
         at com.splwg.base.support.cobol.host.RemoteJVMConnectionImpl.<init>(RemoteJVMConnectionImpl.java:67)
         at com.splwg.base.support.cobol.host.RemoteJVMFactoryImpl.addConnection(RemoteJVMFactoryImpl.java:83)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.addNewConnection(RotatingCommandRunnerProvider.java:135)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.addNecessaryConnections(RotatingCommandRunnerProvider.java:121)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.<init>(RotatingCommandRunnerProvider.java:61)
         at com.splwg.base.support.cobol.host.CobolHostStartup.startup(CobolHostStartup.java:41)
         at com.splwg.base.support.context.ApplicationContext.initializeCobolRuntime(ApplicationContext.java:178)
         at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:158)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:144)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:65)
         at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:426)
         at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:175)
         at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3763)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4211)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    - 10:34:03,234 [main] ERROR (cobol.host.SocketStrategy) Unable to create socket for inter JVM communication on port 5506
    - 10:34:03,250 [main] INFO (cobol.host.RemoteJVMConnectionImpl) Connection to JVM 1 being shunned
    *-  10:34:03,250 [main] ERROR (cobol.host.RemoteJVMConnectionImpl) An exception has occurred calling the remote JVM*
    *-  10:34:03,250 [main] FATAL (support.context.ApplicationContext) Error initializing ApplicationContext*
    *-  10:34:03,250 [main] ERROR ([Catalina].[localhost].[]) Exception sending context initialized event to listener instance of class com.splwg.base.web.startup.SPLWebStartup*com.splwg.shared.common.LoggedException:
    The following stacked messages were reported as the LoggedException was rethrown:
    com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:158): Error initializing ApplicationContext
    com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.getStreamHolder(OptimizedRemoteExecuterStub.java:125): An exception has occurred calling the remote JVM
    com.splwg.base.support.cobol.host.SocketStrategy.unsafeOpen(SocketStrategy.java:123): Unable to create socket for inter JVM communication on port 5506
    The root LoggedException was: Unable to establish connection on port 5506 after waiting 20 seconds.
         at com.splwg.shared.common.LoggedException.wrap(LoggedException.java:197)
         at com.splwg.shared.common.LoggedException.wrap(LoggedException.java:85)
         at com.splwg.base.support.cobol.host.SocketStrategy.handleConnectionException(SocketStrategy.java:134)
         at com.splwg.base.support.cobol.host.SocketStrategy.unsafeOpen(SocketStrategy.java:123)
         at com.splwg.base.support.cobol.host.SocketStrategy.open(SocketStrategy.java:103)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.createNewHolder(OptimizedRemoteExecuterStub.java:162)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.getStreamHolder(OptimizedRemoteExecuterStub.java:125)
         at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.invoke(OptimizedRemoteExecuterStub.java:46)
         at com.splwg.base.support.cobol.host.RemoteRunnerImpl.invoke(RemoteRunnerImpl.java:89)
         at com.splwg.base.support.cobol.host.RemoteJVMConnectionImpl.createRemoteRunner(RemoteJVMConnectionImpl.java:148)
         at com.splwg.base.support.cobol.host.RemoteJVMConnectionImpl.<init>(RemoteJVMConnectionImpl.java:67)
         at com.splwg.base.support.cobol.host.RemoteJVMFactoryImpl.addConnection(RemoteJVMFactoryImpl.java:83)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.addNewConnection(RotatingCommandRunnerProvider.java:135)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.addNecessaryConnections(RotatingCommandRunnerProvider.java:121)
         at com.splwg.base.support.cobol.host.RotatingCommandRunnerProvider.<init>(RotatingCommandRunnerProvider.java:61)
         at com.splwg.base.support.cobol.host.CobolHostStartup.startup(CobolHostStartup.java:41)
         at com.splwg.base.support.context.ApplicationContext.initializeCobolRuntime(ApplicationContext.java:178)
         at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:158)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:144)
         at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:65)
         at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:426)
         at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:175)
         at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3763)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4211)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
    Caused by: java.net.ConnectException: Error: Could not open pipe
    caused by system error: The system cannot find the file specified.
         at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.connectToPipe(Native Method)
    can anyone please help me out to resolve this issue.
    Thanks,
    Fawaz

    Hi,
    Have you tried to restart the SPL service again and again? And sometime i use to get these OptimizedRemoteExecuterStub.getStreamHolder(OptimizedRemoteExecuterStub.java:125): An exception has occurred calling the remote JVM exception if the machine is occupying more memory....
    Try to restart it again.

  • Error in starting opmn server

    Hello,
    Note: I posted this thread on the Identity Management forum as well. I wanted to post it here too, as I think my problem may be a more generic Application Server one, instead of one specific to Identity Management. If this is improper etiquette, I apologize.
    I have a VM, which is being administered by VMware Lab Manager. The VM is running RHEL 5.1, and has an Oracle 11g database installed.
    I am in the process of trying to install and configure Oracle Internet Directory 11g. To do this, I ran the Oracle Fusion Middleware 11g Oracle Identity Management Installer. I selected the "Install Software - Do Not Configure" installation type, and chose to "Configure without a Domain" in order to avoid having to install and administer a WebLogic domain. I set "/data1/u01/app/oracle/product/11.1.1" as the Oracle Middleware Home, and "Oracle_IDM1" as the Oracle Home Directory. (To simplify things below, let ORACLE_IDM_HOME refer to the /data1/u01/app/oracle/product/11.1.1/Oracle_IDM1" directory... understand that no environment variable exists with this name though.) The installation routine ran successfully.
    But, I ran into a problem while trying to configure the Oracle Identity Management 11g components. I ran the Oracle Identity Management 11g Release 1 Configuration Wizard (ORACLE_IDM_HOME/bin/config.sh). Here are some of the key configuration values that I entered:
    - Oracle Instance Location: /data1/u01/config/oracle/as_admin/asinst_1
    - Oracle Instance Name: asinst_1
    - Select Domain: Configure without a Domain
    - Configure Components: Oracle Internet Directory
    - Configure Ports: Auto Port Configuration
    - Specify Schema Database: Create Schema
    After entering my configuration values and hitting the Configure button, the configuration process started running. Shortly thereafter, under Bootstrap Domain Configuration, "Failed" appeared next to the "Create ASInstance" line, with the following error listed:
    {code}
    Error creating ASInstance asinst_1
    Cause: An internal operation has failed: Error in starting opmn server
    Operation aborted because of a system call failure or internal error
    {code}
    In case it would be helpful, here is the output from the error log for the Oracle Identity Management 11g Configuration Wizard:
    {code}
    oracle.as.provisioning.util.ConfigException:
    Error creating ASInstance asinst_1.
    Cause:
    An internal operation has failed: Error in starting opmn server
    Operation aborted because of a system call failure or internal error
    Action:
    See logs for more details.
    at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:306)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:163)
    at
    oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:114)
    at
    oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:533)
    at
    oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:437)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:870)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:824)
    at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1256)
    at
    oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at
    oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at
    oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at
    oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at
    oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at
    oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at
    oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
    Operation aborted because of a system call failure or internal error
    at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:255)
    at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:251)
    ... 16 more
    {code}
    To get more information, I tried to manually start the opmn server (I set ORACLE_INSTANCE to "/data1/u01/config/oracle/as_admin/asinst_1" and then ran "./opmnctl start" from the ORACLE_IDM_HOME/opmn/bin directory). As expected, the server failed to start. But, I checked the opmn.out file (in the ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn directory), and found the following error repeated several times:
    {code}
    OPMN worker process exited with status 8b. Restarting.
    OPMN worker process exited with status 8b. Restarting.
    OPMN worker process terminated with signal 11 7 times in 10 seconds -- aborting!
    {code}
    Does anyone know what this error means? I am at a loss as to what to do at this point, so any help would be greatly appreciated.
    Thank you!

    For what it's worth.... I ran into the same thing on a Linux 64 bit Oracle Enterprise Linux box I had set up. I was just able to resolve the issue after many failed attempts.
    According to the log the instance is actually created successfully, but when opmnctl startall command is called immediately afterwards that's when the badness happens, and it just associates the opmnctl start failure to the ASInstance creation. So I decided to call opmnctl startall from the command line immediately after the failure. At that point SELinux started notifying me that a bunch of lib*.so files that opmnctl needed were being blocked when it was called. I went ahead and disabled the entire SELinux functionality and it worked after that!
    To turn off SELinux edit /etc/selinux/config file. Edit the following line:
    SELINUX=disabled
    Then restart linux, and rerun the OBIEE config again.
    Good Luck, hope that helps someone

  • Error in starting server

    Hi,
    While starting a weblogic server I am getting the following error: I am using weblogic 9.1
    <Feb 13, 2007 1:47:31 PM EST> <Error> <HTTP> <BEA-101359> <The servlet weblogic.
    servlet.AsyncInitServlet init method failed while it was run in the background.
    The exception was: java.lang.ClassNotFoundException: com.bea.netuix.servlets.man
    ager.SingleFileServlet.
    java.lang.ClassNotFoundException: com.bea.netuix.servlets.manager.SingleFileServ
    let
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
    ClassLoader.java:222)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClass
    Loader.java:195)
    at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAw
    areClassLoader.java:54)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)

    JP,
    Could you post the stack trace?
    JP wrote:
    I am getting error when starting server on linux saying JNDI not initializing JTA Exception. Please help me

  • OS Error in starting the OCFS Service on windows server 2008

    Hi,
    Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
    ERROR : OS in Error in starting the OCFS Service
    Can any one please tell what could be the issue ..
    Thank You

    Solved this after some trawling through xml configuration files on the server.
    The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
              <ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    changing this to:
              <ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    and the OC4J container starts successfully.
    Regards,
    -Haakon-

Maybe you are looking for

  • Clicking mouse many times

    Every time when I want to open a folder in Finder (Documents or Events in iPhoto) I have to click soooo many times to open it. The only time it opens directly is when I click the right side of the mouse and than "Open in New Tab".... Any ideas????

  • Issue with CSV export while using HTMLDB_ITEM.SELECT_LIST_FROM_LOV in SQL

    Hi, I have created a SQL report with HTMLDB_ITEM package. IN that report, I have generated a report column using SELECT_LIST_FROM_LOV, which can be used by the admin to update the column entry. Here is the link:- http://apex.oracle.com/pls/apex/f?p=5

  • How can I get an ipod replacement dock on my Ilive it188b or have it repaired?

    The ipod dock on my Ilive  it188b stopped working and doesn't play or charge my compatible ipod which works on my other stereo. Everything else on the stereo works fine. I contacted the company and they would not sell me a replacement dock because of

  • Witholding tax calculation with complex formula

    Hi Team, Is there any solution for the below requirement in calculating withholding tax. System should consider the below formula while calculating Withholding tax for vendor. If the Invoice (INV) amount is Less than 800 = Tax is 0 801 to 4000  = (IN

  • Clear Selection-Screen Fields

    Hello all, How to clear the fields content from a selection-screen when  the user returns from report to sel.screen? I try in PBO for selection screen to clear all the fields, works fine but with one exception, when it is pressed Enter, all the field