Error in starting the service Oracle CSService not found

Hi all,
i am trying to install Oracle Enterprise manager grid control,
i am getting the following error message
"error in starting the service Oracle CSService not found"
when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
then i checked in the service properties, and the path is pointing to a different directory,
now i want to change this path to the correct oracle bin directory.
any views how to cnage/update this path in the services.msc, for "Oracle CSService"
Thanks alot.

Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers.

Similar Messages

  • Error while starting the service "oracle client cache"

    hello everyone,
    I keep getting an error message: while i'm starting the service "oracle
    client cache "
    The instruction at 0x7c911e58 referenced memory at 0x00000000. The
    memory
    could not be read.
    please help me in rectifying this error ASAP
    so that i can proceed further in my work
    thanks in advance

    Hi
    i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
    and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
    Thanks to all the viewers.

  • Error in Starting the service.The Service Schedule doesnot Exist.

    when i install the Oracle 8i on Windows 2003 then
    it installed successfully and import and export data successfully wothout any Problem
    But after that when i restart the Server then
    it ask for the User name and Password BUT when i entered the User Name and Password it show's that Error
    "Error in Starting the service.
    The Service Schedule doesnot Exist."
    so please can you solve the problem ?
    My mail id is [email protected]
    Thanking you
    Vikas garg

    Hi
    i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
    and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
    Thanks to all the viewers.

  • Error code: 0x80070035 The network path was not found

    "Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
    The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
    Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".  
    Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
    So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
    DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
    All strarted and running in Automactic mode.
    Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
    Someone please help !

    Hi,
    In addition, I would like to suggest the following:
    Enable NetBIOS over TCP/IP:
    1.    Go to “Control Panel\Network and Internet\Network Connections”.
    2.    Right-Click on the connection and choose Properties.
    3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.    Click Properties, and then click Advanced.
    5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Thanks.
    Nicholas Li - MSFT

  • Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

    I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
    Richard

    I thought I would add in another scenario, since this link came to the top of my list in the search engine.
    We are running 2008 R2 with SP1 (it happened without SP1 as well)
    We could not map using UNC (IP, FQDN, or netbios name).  We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
    In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
    You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
    And add LanmanWorkstation to Providerorder
    I found on a Citrix board that citrix has an issue with this as well
    If you're running VM  here is an additional step you should do as well
    When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
    > Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
    To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
    To workaround this issue, if you have already upgraded VMware Tools:
    Click Start >
    Run, type regedit, and click OK. The Registry Editor window opens.
    Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
    Delete the reference to
    hgfs.
    Reboot the virtual machine.
    We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
    I hope that this saves people a lot of time.   I spent days researching this.
    This was the solution for me on 2008 R2 DC w/ Exchange.  I do not have VMWare installed but do have Hyper-V.  Thank you so much!

  • All website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not help

    ''dupe of https://support.mozilla.org/en-US/questions/928117''
    all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any ways

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *http://kb.mozillazine.org/Error_loading_websites
    You can try to reset (power off/on) the router.

  • All website went "HTTP Error 404. The requested resource is not found."

    ''dupe of https://support.mozilla.org/en-US/questions/928117''
    all website went "HTTP Error 404. The requested resource is not found."
    this only happen in firefox (i'm using IE to post this question)

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *http://kb.mozillazine.org/Error_loading_websites
    You can try to reset (power off/on) the router.

  • Error in starting the service

    iam new to OBIEE, while iam starting the services of Oracle BI Server, then display an error as
    "Could not start the Oracle BI Server sercice on Local Computer.
    Error 1064: An expception occurred in the service when handling the control request."
    why this error occurs, is there any problem in installation or in any other else....

    Hi,
    I have faced this before. When you change the NQSconfig file to add a new RPD created by you and change the INSTANCECONFIG.XML file with the services in started state you get this error. To rectify the issue please stop the BI SERVER and presentation server and JAVA host services. Then chnage the NQSCONFIG.INI file and INSTANCECONFIG.XML file. Then you start the services it will start without an error.

  • Service Error: File or assembly name Oracle.DataAccess not found

    Hi, everyone.
    I knew someone had post the similar question before. However, the discussion is not be able to solve my problem. Please give some suggestion.
    I got a net1 application use the oracle.dataAccess.dll as reference.
    I compiled it on my location machine and updated on the test server.
    But the event viewer shows the following error
    'Could not load file or assembly' Oracle.DataAccess, Version=1, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, or one of its dependenices. the system cannot find the file specified.
    Then I checked my application I realize, the oracle.DataAccess.dll I reference on my local machine is version10g. So I remove the reference and add the dll again (correct version 9i that match the testing enviroment). Becuase the testing environment got 9i installed.
    p.s I done the permission stuff for the ora92 folder and reboot is before I update the service.
    When I start the service again. I still have the same error. So after whole bunch of checking , re-add the reference and recomplie. I am running out of the solution.
    Please if anyone can kindly give a hand before I shoot myself. =(
    Thanks in advance
    null

    after long wait and there still no reply or suggestion from any one. Finally, I managed to solve this problem myself.
    Check your oracle.dataaccess.dll which you reference in the project and make sure the oracle.dataccess.dll version whould match the one you want to use.

  • MDT user credentials error: Invalid credentials: The network path was not found

    I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
    When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
    After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
    wpeutil InitializeNetwork
    ping localhost
    wpeinit
    Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
    It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
    Have someone can help me?
    Thanks a lot

    Hi,
    Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
    Dell Latitude E5400:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
    Dell OptiPlex 760:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
    Please make sure you add the correct network driver to deployment point.
    Additional Information:
    http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
    http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
    Hope it helps.
    Tim Quan - MSFT

  • Error in Installation--The Java class is not found: SDTGui

    I am in the process of instlaling SAP in AIX machine
    When i start the Startsapinst,  i am getting the following error .
    Pls hlep
    <b>The Java class is not found: SDTGui</b>

    I am using humming bird software
    i have set the display.
    Xclock is running
    Pls help

  • Error while starting the service

    Hi
    I am trying the web service example using j2ee from
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JAXRPC3.html#wp124102
    when I try to deply the service I am getting an exception as follows :
    Can any one help me out ?
    Thanks ,
    Amol
    distribute: C:\j2sdkee1.4\helloapps\MyHelloService.war
    Deploy action running...
    Contacted Server...
    Application MyHelloService transferred
    Application MyHelloService transferred
    Storing final WSDL for Web Service MyHelloService at C:\j2sdkee1.4\repository\applications\MyHelloService\MyHelloService53797.wsdl
    Deployment of MyHelloService is complete.
    Deployment of MyHelloService is complete.
    Completed
    --- Operation Completed Successfully ---
    start: MyHelloService
    Running...
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.RemoteException: null; nested exception is:
         javax.management.ReflectionException
         at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemException(ShutdownUtilDelegate.java:64)
         at javax.rmi.CORBA.Util.mapSystemException(Util.java:65)
         at org.omg.stub.com.sun.enterprise.tools.deployment.backend._JarInstaller_Stub.start(Unknown Source)
         at com.sun.enterprise.deployapi.actions.ModuleStateAction.run(ModuleStateAction.java:58)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.rmi.RemoteException: null; nested exception is:
         javax.management.ReflectionException
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.start(JarInstallerImpl.java:1171)
         at org.omg.stub.com.sun.enterprise.tools.deployment.backend._JarInstallerImpl_Tie._invoke(Unknown Source)
         at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
         at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
         at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
         at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
    Caused by: javax.management.ReflectionException
         at com.sun.management.j2se.MOAgents.EmmaBeanUtil.invoke(EmmaBeanUtil.java:346)
         at com.sun.enterprise.management.model.emma.WebModuleMdlEmmaAgent.invoke(WebModuleMdlEmmaAgent.java:425)
         at com.sun.jdmk.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:334)
         at com.sun.jdmk.MetaDataImpl.invoke(MetaDataImpl.java:496)
         at com.sun.jdmk.DefaultMBeanAccessor.invoke(DefaultMBeanAccessor.java:528)
         at com.sun.jdmk.MBeanServerImpl.invoke(MBeanServerImpl.java:579)
         at com.sun.enterprise.management.agent.MEJBUtility.invoke(MEJBUtility.java:314)
         at com.sun.enterprise.management.util.J2EEManagementObjectManager.startModule(J2EEManagementObjectManager.java:636)
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.start(JarInstallerImpl.java:1161)
         ... 5 more
    !!! Operation Failed !!!
    [Completed (time=22.7sec, status=13)]
    **********************************************************************

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

  • Plumtree Job Dispatcher Service giving an error while starting the service

    Could not start the plumtree Job Dispatcher service service on LOcal Computer. The service did not return an error. THis could be an internal windows rror or an internal service error. If the problem persits, contact your system administrator

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

  • Plumtree ob dispatcher service error - while starting the service

    Could not start the plumtree job dispatcher service service on local computer
    Error 1069: The service did not stsrt due to a logon failure

    Hi Ray,
    I assuming you are on 5.0.2. If so, please refer to chapter 3(Pre-installation) of the install document, specifically the setup of the automation server user. The stated error indicates that the automation user info you entered into the installer does not match up with the entries in the pre-install steps.
    Hope that helps.
    Vasanth

  • Not able to start the remote server - class not found exception

    All,
    I am quite new to RMI programming, although i am an experienced java programmer. I am facing a problem in starting the remote server program which i wrote for RMI. I am getting class not found exception for "stub" class eventhough the class is in the classpath.
    Following is the error console:
    cmd> java -classpath "D:\Eclipse_WorkSpaces\WS2\RMITests\classes" MyServerImplementation
    GetNames error: RemoteException occurred in server thread; nested exception is:
    java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
    java.lang.ClassNotFoundException: MyServerImplementation_Stub
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
    java.lang.ClassNotFoundException: MyServerImplementation_Stub
    at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:396)
    at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:250)
    at sun.rmi.transport.Transport$1.run(Transport.java:159)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
    at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
    at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
    at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    at java.lang.Thread.run(Thread.java:619)
    at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
    at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
    at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:359)
    at sun.rmi.registry.RegistryImpl_Stub.rebind(Unknown Source)
    at java.rmi.Naming.rebind(Naming.java:160)
    at MyServerImplementation.main(MyServerImplementation.java:21)
    Caused by: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
    java.lang.ClassNotFoundException: MyServerImplementation_Stub
    at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
    at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:386)
    at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:250)
    at sun.rmi.transport.Transport$1.run(Transport.java:159)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
    at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
    at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
    at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.ClassNotFoundException: MyServerImplementation_Stub
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:247)
    at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:434)
    at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
    at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:620)
    at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
    at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
    at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
    at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
    ... 12 morePLEASE ADVISE HOW TO RESOLVE THIS...
    Following are my classes:
    MyRemoteInterface.java
    import java.rmi.Remote;
    import java.rmi.RemoteException;
    public interface MyRemoteInterface extends Remote {
    public String[] getNames() throws RemoteException;
    public class MyServerImplementation extends UnicastRemoteObject implements
    MyRemoteInterface {
    public MyServerImplementation()throws RemoteException{
    super();
    public String[] getNames() throws RemoteException{
    return new String[]{"Name1","Name2","Name3","Name4"};
    public static void main(String args[]) {
    try {
    // Create an object of the HelloWorldServer class.
    MyRemoteInterface obj = new MyServerImplementation();
    // Bind this object instance to the name "HelloServer".
    Naming.rebind("rmi://localhost:1985/GetNames", obj);
    System.out.println("GetNames bound in registry");
    catch (Exception e) {
    System.out.println("GetNames error: " + e.getMessage());
    e.printStackTrace();
    public class MyRMIClient {
    *@param args*
    public static void main(String[] args) {
    try {
    MyRemoteInterface remObj = (MyRemoteInterface) Naming.lookup("rmi://localhost:1985/GetNames");
    System.out.println("Names are "+remObj.getNames());
    catch(Exception e) {
    System.out.println("Problem encountered accessing remote object "+e);
    }

    That's a remote exception coming from the registry. You need to learn to recognize remote exceptions and their source, it's a mjaor source of confusion in RMI.
    In this case it's the registry that can't find the stub class.
    The stub class needs to be in the CLASSPATH of (i) the Registry and (ii) the client as well. Ditto the remote interface; ditto any application classes it refers to, and so on until closure.
    The easiest way to achieve (i) is to start it in the server's JVM, with LocateRegistry.createRegistry().

Maybe you are looking for