Error in SXMB_MONI - "Message Recorded (Commit Missing)"

We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

Similar Messages

XML Status : 'Message recorded, commit missing"

Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
Sandeep

I think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK

Outbound Proxy - Message Recorded(Commit Missing)

Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan Bhasha

Do the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

TS3212 Error reinstall itunes message due to missing registry items on a Win 7 64bit system and the install is going to C:/program files/.

I have downloaded itunes and run the installation but I keep getting an error message. the request is to reinstall itunes due to missing registry items. The exact message is:
The registry setting used by the iTunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please reinstall iTunes.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Error in sxmb_moni : message scheduled

hi,
   in sxmb_moni , i get the status messasage "scheduled".
my queue status is "message waiting in queue".
my receiver field is empty.
      can somebody help me to solve this problem.
thanks in advance,
      disney

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

ABAP PROXY--Commit missing

Hi,
I am working on a scenario outbound from SAP Using Proxies :
When I check SXMB_MONI in R/3 the message has the status
Message Recorded(commit missing).
Can any one help me on this .
I guess we have to manage queues(SXMB_ADM).If so Please let me know how can i do.
Thanks,
Ravi P

Hi Udo,
Thanks ya.
I guess Commit work is not requried when we are working on the synchronous proxies.Correct me if i am wrong.
Ravi P

About OGG-01028 recovery record is missing error

Hi! everybody,
My enviroment is :windows server 2008 64bit ,oracle 11GR2,goldengate 11.1.1.1.I often meet the error :ogg-01028 recorery record is missing .
In mos,I found the relative article((Doc ID 1094767.1)
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle GoldenGate - Version: 10.4.0.19 to 11.1.1.1.0 - Release: 10.4.0 to 11.1.1
Information in this document applies to any platform.
Symptoms
Extract abended with:
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
in later OGG version, the error code is like following:
OGG-01028 Recovery record is missing from log with seqno 1934 when extract has reached log with seqno 1935, block size 512, and next_checkpoint RBA at 83962348.
Archive logs 14497 & 14498 exist, and restarting extract failed with same error.
Cause
The extract was manually stopped and current/next checkpoint is set to a zero length record in redo. This is a very rare condition, and the chance of hitting it is also low. When this extract was restarted, the error occurred. Extract's Current/Next checkpoint is set to a zero length record at the end of a log and on restart this zero length record is skipped as it has no useful data. Since this record is skipped the recovery code thinks this record was missed and generates an error.
This is bug 12693183, 12693291.
Solution
This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.
The following workaround may also be used with no data loss.
Workaround: change the current checkpoint RBA to next block boundary, keep the recovery checkpoint the same
1. Get block size of your platform.
The block size is shown in the error message.
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
For reference the following lists the block size of major platforms:
AIX, Linux, Sun, Windows & VMS: 512 Bytes
HP-UX, Tru64: 1024 Bytes
S390, MVS: 4096 Bytes.
2. Backup the checkpoint file in directory dirchk
3. info <ext> showch
Get current and recovery checkpoints, example:
EXTRACT EIDLD Last Started 2010-05-04 16:39 Status ABENDED
Checkpoint Lag 01:14:54 (updated 01:14:41 ago)
Log Read Checkpoint Oracle Redo Logs
2010-05-04 15:24:21 Seqno 14496, RBA 149274704
Current Checkpoint Detail:
Read Checkpoint #1
Oracle Redo Log
Startup Checkpoint (starting position in the data source):
Sequence #: 14496
RBA: 149273104
Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
Sequence #: 14496
RBA: 149273104
Current Checkpoint (position of last record read in the data source):
Sequence #: 14496
RBA: 149274704
4. Alter both recovery checkpoint and current checkpoint to the start point of next block number
alter <ext>, extseqno <seq#>, extrba <rba#>
In the above example:
SQL> select ceil (149274704/512) * 512 from dual;
CEIL(149274704/512)*512
149275136
seq# remains the same as in the showch display.
ggsci> alter extract <ext>, extseqno 14496, extrba 149275136
If the new rba number is bigger than the current file size of the archivelog file, you have to alter both checkpoint to start from RBA 0 in next seqno file.
For example, if the size of archived log that has seqno 14496 is only 149275000, which is smaller than the new RBA calculated, 149275136, you have to issue the following command
ggsci> alter extract <ext>, extseqno 14497, extrba 0
5. Alter the extseqno and extrba of recovery checkpoint back to its original recovery checkpoint position
In this example,
ggsci> alter extract <ext>, ioextseqno 14496, ioextrba 149273104
6. info <ext>, showch
Confirm the change.
7. start <ext>
Note: Above example is for extract without threads option. For extract with threads option, "thread <thread#>" is needed for "alter extract " command.
e.g., "ggsci> alter extract <ext>, extseqno 14497, extrba 0" will be "ggsci> alter extract <ext>, thread <n>, extseqno 14497, extrba 0" (here, <n> is the ogg thread number).
My question is :This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.My goldengate version is 11.1.1.,is it need any patch to avoid the error?If the patch can not resolve the problem ,can I use some utilities ,such as logdump,logmnor to find the relative sql detail when the extract abends.

Well, you have the seqno and RBA (where extract abended, on a zero length record). You could assume that the record before was good to go, and that should give you an idea of the relative SQL. You could also get down and dirty with Logminer, using the SCN as a starting point to find the last good record shown in the trail.

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

Do you still get that one if you restart the PC and try to connect again?

New IPad error message when connecting to Itunes: Pairing record is missing

Pairing Record is missing and Itunes can not connect to my ipad. How do I resolve?

These directions should help you: http://computerknowhow101.com/iso/a-fix-for-pairing-record-missing-error

Why am I getting error msg: Pairing Record is Missing?

I have been syncing my iPhone with my Win7 PC for several weeks now, but I am suddenly getting the error message: "iTunes could not connect to the iPhone because the pairing record is missing". What does this mean, and why has it occurred? I've rebooted both my PC and the iPhone several times, with no luck. Just a few hours ago I successfully synced, and nothing's been changed on either device, but now I cannot sync. Thank you.

Do this:
Unplug your iPhone from your computer
Tap on the iTunes app
Scroll down to the bottom
Tap on your AppleID
Sign out
Sign back in
Plug your iPhone back into your computer
Your iPhone should now be recognized by iTunes.

IPhone 5 Restore: 'Pairing record is missing' error

Hello,
I backed up my iPhone 5 this morning as I was getting it replaced due to Scuffgate, I linked my new phone with iTunes and it seemed everything was fine until and error message appears reading: "iTunes could not connect to the iPhone because the pairing record is missing"
My phone then disappears on iTunes, however on inspection of my phone it seems it worked. I was wondering is this an error due to the phone being different from the one I backed up? If so is this normal and nothing to worry about?
I would test if it restores with a new back up file however it would mean putting in all the passwords again etc anyone else had this issue/experience?

Try rebooting your computer.

Error: "pairing record is missing"

When i try to set up and sync with itunes i get "itunes cannot connect to ipod because pairing record is missing"
Any help would be appreciated.
Ted

I got the same error tonight.
Was having some odd problems with my iPod touch (16GB, v1.1.3 with January software upgrade) occasionally changing the date and time to Dec. 31, 1969, also getting stuck in caps lock mode, so I decided to restore.
First attempt at a restore failed. Second attempt looked like it succeeded, with a message that came up after the firmware restore that said the iPod would reappear in iTunes after it finished restarting. After a long wait, the iPod restarted with the "connect to iTunes" image, then went black. A short time later, a window popped up with the message about the missing pairing record.
Two, three or four attempts at disconnecting and reconnecting the cable all resulted in the same error message. I started writing this post, in fact, to report I was stuck with the same unusable iPod, when I reconnected the cable to make sure I had the wording of the error message correct.
Wouldn't you know? It connected just fine, asked me if I wanted to restore my settings and at the moment is syncing back all my music and movies. I'll return here if I see any more problems, but I'm keeping my fingers crossed that all's well.

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error in SXMB_MONI - "Message Recorded (Commit Missing)"

Similar Messages

Maybe you are looking for