Error in system connection
Hi,
I created a system in EP for publishing some RFC- based reports in EP without writing code. I given all detail for my R/3 system .I mapped my user id and password in EP and R/3.But i testing the system connection like System name-open-connection test i am getting error like this;
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Could not retrieve default alias. Make sure the system object has at least one alias.
How to resolve this error to stabilesu2019 the connection.
Thanks,
Kundan
Hi kundan,
Once we have created a system at Portal , we provide the Properties like ITS and WAS.
These are Object properties of teh system which we create.
There will be a drop down where we can choose system properties as 'object','system alias, 'permissions' and 'Connection test'. Now at these we need to choose " system alias".
Here we provide a system alias and 'add as default'.
Now we are done with defining the default alias.
Hope this was helpful to you.
Regards,
srikanth
Similar Messages
-
Error " Could not connect to SAP R/3 system"
HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
RachelWhen I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes -
Error in system created to connect BI from portal
I'm getting error when i connect with our back end system BI.
i created a system using template SAP system with load balancing. i created alias for this system and did user mapping. when i run connetcion test i got the following as test result
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
pls give the solution for this.
Regards
RVSHello Joseph:
Many thanks for sharing the solution with the community. I think the solution is what Adam aluded to in his post on May 7, 2010.
For those reading this thread, also see the following:
[Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de]
And of course, don't forget to search the forums and KB:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
Ludek -
RFC system error in system/destination 00024No connect to database, sessio
Hi Experts,
I am getting the below mentioned error while transporting the TO.Although the transport was successful, Please let me know how to solve the probblem.
RFC system error in system/destination Message no.XT107
Diagnosis:
an error occured during RFC communications.
Function:TMS_TP_SHOW_BUFFER
RFC message :00024N0 connect to database, session terminated
System responce:
The function terminates.
Procedure: correct the error on the whole system and execute the command again.
Many thanks in advance.
Regards,
SuneelHi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2 3
TMSADMPRD.DOMAIN_DV2 3
TMSADMQA2.DOMAIN_DV2 3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
Connection test TMSADMPRD.DOMAIN_DV2
Connection type: R/3 connection
Cancel At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675 -
An error occurred when connecting to the accounting system ID3DEV310
Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
AryanHi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan -
Error: unable to connect to database using user system. please check privil
Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
RajaDid you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai. -
Potal Authorisation Error:"Failed to connect backend system.Check your syst
Hi Experts,
Please advise me on how to proceed....
I created a dashboard reports (5) based on 5 different reports in BI Queries using Visual Composer...I deployed them to portal and in portal i assigned those iviews to a role and assigned that role to a end user.
In BW end user is autorized to execute those 5 queries and in portal user is able to access those queries as well
But when he tried to execute Dashboard reports..it is displaying error
"Failed to connect backend system.Check your system definition and user priviliges"
Then i modified his authorisations in BW assigned SAP_J2EE_ADMIN role in BW and then in portal he is able to execute the Dashboard reports...by assigning the SAP_J2EE_ADMIN role he is able to execute dashboards in portal and he got more authorisation in portal than he required like 'Content Admin','User Admin' and 'System Admin'
I tried by using SAP_J2EE_GUEST role but he is getting error
"Failed to connect backend system.Check your system definition and user priviliges"
Please advise on how to proceed
ThanksHi,
Refer,
Visual composer
Failed to connect to backend system. Check your system definition and user
Regards,
P.Manivannan. -
When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)". This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/ Makes me wish I did not have my music on itunes.
moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes". -
Error: No Phone System Connection
Greetings,
I am integrating RCC with Lync 2013 and I am getting this
Notification: No Phone System Connection. I have notices that when I capture packets transferred between Front End Server and CUPS server, there are no packets being sent to CUPS server.
I have completed below steps:
1) I have enabled integration with my phone integration option in Lync client
2) Added Static route to the CUPS server on port 5060.
3) Added CUPS as a trusted application in the application pool.
4) Published the new topology and restarted the Front End Services.
Remote Call Control URI is set to: sip:[email protected]
Phone URI is set to XXXX;phone-context=dialstring
I would really appreciate if you can guide me.
Thank you
Chirag
Chirag ShahHi,
Did the Lync account contains an apostrophe? If so, it may influence for the users with an apostrophe (') in their Lync sign-in ID. In order to resolve the issue, remove the apostrophe from the Lync sign-in ID. Also you can change to use another Lync account
to have a test.
You can refer to the part of “Unable to get Softphone control” in the link below:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#controlerror
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1. Choose Modeling.
2. Choose Source Systems.
3. Select SAP in the window on the right.
4. Choose the Context menu (right mouse click).
5. Choose Create.
6. Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8. In the dialog box Please log on as an administrator in the following screen choose Continue.
9. Log on to the Source System with your administrator user. Choose the correct client.
10. On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten PoldHello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian! -
BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD. -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
Error while Test Connection with Connector
hi all:
there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system .. -
Fatal error while filling connection pool
I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.
John,
Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
Also check the server package:
MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
For services names the url is jdbc:oracle:thin@host:port:SID
Also check your Network firewall between MII and DB and ports too.
Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
-Suresh
Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................
Maybe you are looking for
-
I have iTunes on an old pc and am thinking of buying a MacBook Air. I am wondering how to get the content of my iPad on to the Mac as I know that sync only happens in one direction, from pc to device. I assume therefore that when I attach my pad to t
-
this phone is my life. i share an itunes account with my mom and she deletes every photo i put in photo stream to keep for my new phone or ipod. so how should i back up my photots?
-
My husband and I both have the iPhone 3G and use my computer to link to iTunes. Can he buy apps that I have already downloaded if we use the same account or do I need to set up a new account for him? Also, his phone is currently set up under my accou
-
How to creat background user.
How to creat background unser in BW? I inputed transaction code: SBIW ,and SPRO.But I haven't found 'Creat Background users for link to SAP'.How to creat this user? thanks.
-
How to add a flash frontend?
I have a client server application written in Java. Currently the server is Java based and the client side is a Java applet. I would like to know what techniques are possible to add a flash front end. There is a lot of presentation logic processed on