Error in TeamViewer: "The iView has timed out"

All,
We have put the TeamViewer in the Dynamic Navigation container to display employees on our custom build page which contains only standard iViews.
For some strange reason we get the following error message in the TeamViewer iView and it does not disappear anymore:
“The iView has timed out. There is no cached content to display. Click 'Reload' to retrieve updated content. You may need to wait for the cache to retrieve the content from the source.  Reload”
(But the 'reload' is not a link nor is there a possibility to refresh)
To solve this problem we already tried the following:
- Setting the client side caching to ‘no’.
- Putting the time out very high and also on -1.
- Changing the Cache level to ‘none’.
Does anybody ever encountered the same problem? Any suggestions on where to look for a solution?
We are using:
EP 6.0
MSS BP 60.1.15
SAP 4.6C
Thanks in advance and kind regards,
Michael Beasley
Message was edited by: Michael J. Beasley

Howzit,
This error message is often interchangeable with a more accurate version (I get both errors from separate workstations):
"Failed to connect to backend system. Check your system definition and user privileges"
There are (at least) two possible reasons for this message:
1. Your System alias is invalid - try connecting a new iView using the same system alias an see if that works. If not, regenerate your system alias or connect directly to the root system.
2. The RFC service has stopped or some reason. A restart of the J2EE should resolve this. Also make sure that you are on the latest patch of the J2EE Engine which should prevent this from happening in the future.
GOOD LUCK!

Similar Messages

  • The operation has timed out

    Hello Forum,
    I was running a report that was built on report builder at some point an error message of the operation has timed out will come up.
    I have set the time out to 0 values and more than 600 seconds too.
    On SQL the report ran within 6 minute.
    Will be glad for quick response.
    Thank you.
    Disu Ridwan

    Hi Disu,
    I assumed that you open the report builder from the report manager or you have connectted to the report server.
    As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
    Report Builder 2.0 / 3.0 errors out with 'The operation
    has timed out' when previewing a report saved in Report Server takes more than 10 minutes
    Steps to Resolve SSRS Timeout Issues
    "The operation has timed out" when rendering a report
    If you problem still exists, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Error message ...connection has timed out

    Most times after being on any given site, it will suddenly shut down and give the error message that the connection has timed out and all that I have done is lost

    1
    did your "router" cost less than $200?
    2
    are you an active member of the eye patch crowd?
    3
    do other internets applications experience problems at the same time?

  • How do I fix this error: The iPad cannot be synced. The device has timed out?

    Hello out there! Would someone be so kind as to point me in the right direction in fixing my little promblem? I can't seem to figure out how to get my syncing process to work properly. I've updated all my apps and I have even done the steps to configure. I've chosen to use "my iPad" back up feature and then the next step is to connect to iTunes and sync everything. It will do so and then it will say in the window box of iTunes "Finishing Sync". A minute or so later it will feature an error box presenting the statement: "The iPad, "my iPad" cannont sync. The device has timed out." Where do I go from here? Thanks to any with some good solutions. LJ

    Oops! Shall I add that I have recently updated my iPad's iOS software to iOS 5.1.1 and this is when my troubles began. :-)

  • High number of "The connection has timed out" errors. Where do I set the time out period (variable and file name) - windows 7

    I usually use a wireless network at home and have very few time out problems with Firefox.
    I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
    I suspect that this is the cause of the high number of timeouts I am experiencing.
    Optus say there are no problems so I think I will have to set the timeout to a longer period.
    Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
    Thanks in anticipation.
    Greg Atkinson.
    By the way the same is happening in IE8
    and on many sites other than the Yahoo one below.
    ================Full Error Page ==============
    URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
    =========================================
    The connection has timed out
    The server at au.mg4.mail.yahoo.com is taking too long to respond.
    * The site could be temporarily unavailable or too busy. Try again in a few moments.
    * If you are unable to load any pages, check your computer's network connection.
    * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
    My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
    I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
    Please help!
    Thanks in advance

  • Im trying to download the latest update for my iphone4 and it keeps coming up with an error telling me that it has timed out.. help

    Im trying to download the latest update for my iphone4 and it keeps coming up with an error telling me that it has timed out.. help

    Disable ALL security apps - firewall, antivirus/spyware, etc. - running on you computer.

  • The search has timed out.

    Hello forum.
    When I use the search api, the error message is displayed when I search:
    "The search has timed out. More specific search criteria may be required."
    If I use the same search terms at search portlet the result is ok.
    This is my code:
    portal.wwsbr_search_api.submit_search (
    p_search_terms=> 'contas',
    p_search_operator => 'containsall',
    p_caid=> 33,
    p_language=> 'ptb',
    p_folder_id=> 1,
    p_folder_caid=> 33,
    p_include_child_folders=> 1);
    the page can be accessed by http://www2.tcu.gov.br/portal/page?_pageid=33,176332&_dad=portal&_schema=PORTAL
    Thanks in advanced

    I found some help on SDN.
    But, is integrating the iView on a page and change settings for cache there the only solution, that would solve the error permanently?
    Thanks
    Sven

  • I can't download firefox. It keeps saying the session has timed out and that download failed?

    when i click download it starts to download the file. But then when it hits 99% i get another box that says that it was unable to download Firefox 3.6 and the session has timed out. What is going on?

        Hi Valeria07,
    We want managing your media to be easy! It saddens me to hear that this is not occuring. Do you receive a specific error message when the browser times out? Have you tried using a different browser?
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • The request has timed out after 00:00:00 milliseconds.

    Hello,
    I am having weird exception when I try to send a message to a topic and there's nothing on the internet I could "google with Bing" about it.
    Here's the error message
    The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
    There are two things weird about it:
    The timeout period is 0 miliseconds
    The number of miliseconds is given in format 00:00:00
    Here's the whole stack
    Timestamp: 5.5.2014. 11:15:58
    Message: HandlingInstanceID: b9fcc3c8-c167-47ab-8473-ae45bfb62311
    An exception of type 'System.TimeoutException' occurred and was caught.
    05/05/2014 11:15:58
    Type : System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Message : The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
    Source : Microsoft.ServiceBus
    Help link :
    Data : System.Collections.ListDictionaryInternal
    TargetSite : TAsyncResult End[TAsyncResult](System.IAsyncResult)
    HResult : -2146233083
    Stack Trace :
    Server stack trace:
    Exception rethrown at [0]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenCore(IAsyncResult result, String& expiresIn)
    at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenByAssertion(IAsyncResult result)
    at Microsoft.ServiceBus.SharedSecretTokenProvider.OnEndGetToken(IAsyncResult result, DateTime& cacheUntil)
    at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult.OnEndTokenProviderCallback(IAsyncResult result, DateTime& cacheUntil)
    at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.OnCompletion(IAsyncResult result)
    at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.<GetAsyncSteps>b__f(T thisPtr, IAsyncResult r)
    at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
    Exception rethrown at [1]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(TokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationToken(String appliesTo, String action)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessage(String action, Object body, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.SendCommandAsyncResult.CreateWcfMessage()
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpTransactionalAsyncResult`1.<GetAsyncSteps>d__40.MoveNext()
    at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
    at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
    Exception rethrown at [2]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.EndSendCommand(IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.<.ctor>b__1(IAsyncResult result, Boolean forceCleanUp)
    at Microsoft.ServiceBus.Messaging.BatchManager`1.PerformFlushAsyncResult.OnSingleOperationCompleted(IAsyncResult result)
    Exception rethrown at [3]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.BatchManager`1.BatchedObjectsAsyncResult.End(IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.BatchManager`1.EndBatchedOperation(IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.BatchManagerAsyncResult`1.OnBatchedCallback(IAsyncResult result)
    at Microsoft.ServiceBus.Common.AsyncResult.AsyncCompletionWrapperCallback(IAsyncResult result)
    Exception rethrown at [4]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.OnEndSend(IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.MessageSender.RetrySenderAsyncResult.<GetAsyncSteps>b__f(RetrySenderAsyncResult thisPtr, IAsyncResult r)
    at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
    Exception rethrown at [5]:
    at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
    at Microsoft.ServiceBus.Messaging.TopicClient.EndSend(IAsyncResult result)
    at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
    at Niva.Framework.Azure.Bus.AzureServiceBus.<EnqueueAsync>d__0.MoveNext() in c:\nivatech\papiri\source\framework\Azure\Bus\AzureServiceBus.cs:line 98
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
    at Niva.Framework.Analytics.BusinessActivityLogRepository.<EnqueueAddAsync>d__29.MoveNext() in c:\nivatech\papiri\source\framework\Core\Analytics\BusinessActivityLogRepository.cs:line 51
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
    at Niva.Papiri.Web.Controllers.BaseController.<RegisterActivityAsync>d__4.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\BaseController.cs:line 102
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
    at Niva.Papiri.Web.Controllers.HomeController.<Index>d__0.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\HomeController.cs:line 35
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeAsynchronousActionMethod>b__36(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<InvokeActionMethodFilterAsynchronouslyRecursive>b__3f()
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<>c__DisplayClass48.<InvokeActionMethodFilterAsynchronouslyRecursive>b__41()
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass33.<BeginInvokeActionMethodWithFilters>b__32(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult)
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<>c__DisplayClass2b.<BeginInvokeAction>b__1c()
    at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<BeginInvokeAction>b__1e(IAsyncResult asyncResult)
    Additional Info:
    TimeStamp : 5.5.2014. 11:15:58
    FullName : Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    AppDomainName : /LM/W3SVC/2/ROOT-1-130437489467023302

    We had the same issue and solved it.
    We changed the authorization of the servicebus to SAS and all is working fine now.
    1. Check Azure Portal  select your ServiceBus and go to register configuration
    2. You need the Name and Key of existing Rule (here RootManageSharedAccessKey) or insert a new Rule. We created a new rule with no manage access.
    3.1 In Code:
    Replace the SharedSecretCredentials with SAS Tokenprovider and add it to the endpoint behaviors like before
    TransportClientEndpointBehavior sas = new TransportClientEndpointBehavior();
    sas.TokenProvider = TokenProvider.CreateSharedAccessSignatureTokenProvider("NAMEofRULE","KEYofRULE");
    3.2 App.Config:
    Simply change the tokenprovider line from
    <behaviors>
          <endpointBehaviors>
            <behavior name="sharedSecretClientCredentials">
              <transportClientEndpointBehavior>
                <tokenProvider><sharedSecret issuerName="ACSNAME" issuerSecret="ACSKEY"/></tokenProvider>...
    to
    <sharedAccessSignature keyName="NAMEofRule" key="KEYofRULE"/>
    Hope it helps!

  • Error message... operation has timed out

    My new ipod for my daughter will not show up in itunes.  It says i need to download the latest version (10.5) of itunes. Every time I attempt to download itunes 10.5, I get the error message "the operation has timed out" itunes could not be downloaded. How do I download the latest version? I want to put songs on my daughters new ipod. Thanks

    Temporarily turn off any virus protection and firewall.

  • Collab CopyProjectMetaData - the operation has timed out

    For the life of me, I can't get the CopyProjectMetaData to run w/o timing out. It'll work about 1 in 10 trys if that. I'm using CopyProjectContent on the same two projects successfully everytime. But CopyProjectMetaData is basically useless. Anyone?

    Hi Disu,
    I assumed that you open the report builder from the report manager or you have connectted to the report server.
    As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
    Report Builder 2.0 / 3.0 errors out with 'The operation
    has timed out' when previewing a report saved in Report Server takes more than 10 minutes
    Steps to Resolve SSRS Timeout Issues
    "The operation has timed out" when rendering a report
    If you problem still exists, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Firefox has stopped working. It won't load any page, saying "The connection has timed out." I uninstalled it and reinstalled it, and still nothing. Any suggestions?

    Firefox has stopped working. It won't load any page, saying "The connection has timed out." I uninstalled it and reinstalled it, and still nothing. Any suggestions?

    Please see here: [[Error loading web sites#w_interrupted-or-reset-connection|Error loading web sites#w_interrupted-or-reset-connection]]

  • I can't connect to livejournal. It keeps saying that the connection has timed out. It has been almost a full day since this happened. I tried loading livejournal on Explorer, but that didn't work either

    When I try connecting to livejournal, it tries for a while, then I get an error page saying that the connection has timed out. What's odd is that usually livejournal gives us a warning when the site will be temporarily offline. When I try connecting to livejournal through Explorer, the same thing happens. I've been hitting the try again button for almost a full day. Again, livejournal doesn't normally go offline this long.

    Nevermind, it's working again. Huh. I posted this, then tried livejournal again and it worked. I'm glad it is, but hey! *iz suspicous*

  • I can't search anything- mapquest etc error message is always search has( timed out) how do I fix this?t

    error message reads as follows: The connection has timed out.
    . The site could be temporanily unavailable or too busy
    . If you are unable to load any pages, check your computer's network connection
    . If your computer or network is protected by a firewall or proxy , make sure that firefox is permitted to access Web.
    I have done all these- still have no access to search

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • The operation has timed out default value too low - c# windows application

    Hello,
    I get the message that the operation has timed out when certain operations take too long, which would be any on our development/test server.
    I either need to make an asychronous call which I will investigate or to find the code that sets this value to ten minutes.
    Anybody know how to reset the value to ten minutes?
    Thanks,
    Stephanie

    The timeout is occurring on the client so it not a particular error that's being returned by the server.
    The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
    server.timeout = 300000;
    Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
    a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
    What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
    you generally have a larger problem.
    Cheers
    Glen

Maybe you are looking for