Error in the data loading

Hi All
One infopackage is loading data to two ODS. It is taking long time and failed with short dump. But if we goto st22 it is not displaying any short dump. I have deleted the red requests from both the data targets and scheduled the infopackage. it is giving the same error.

Hi,
The normal procedure to correct this error will first to identify if you have the data in PSA between ODS and cube. In that if you have all the data in PSA u can update it to target.
In ur case as u dont have a PSA you may have to force the request to red and delete it from target Cube then go to source ODS find the data mart (Tick mark) Confirm by making that the request that you deleted from Cube is the same as that you are going to reset datamart status in ODS (when you click on the tick mark in ODS a pop up will come asking if you want to reset datamart..there scroll to right it will show the request name in target).If its same delete the datamart status and then Trigger the infopackage again. But better to pull it to PSA only or to both PSA and target so that in case it fails again you can pull it from PSA.
If you had pulled it before resetting data mart and the request is successful but without data then u may have lost delta and may need to do a full repair.
this should solve your issue,
JituK

Similar Messages

How to rectify the errors in master data loads & transactional data loads?

hy,
please any one tell me
How to rectify the errors in master data loads & transactional data loads?
thnQ
Ravi

Hi,
Please post specific questions in the forum.
Please explain the error you are getting.
-Vikram

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

Error in the Data Selection - Errors in Source System RSM 340

Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
John

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

Error in Master data load because of ###

Hello,
I am getting an error in master data load.
The problem is ####### symbols are encountered in few records.
We have defined a formula to replace the ### with S in transfer structure.
But still it does not replace the #### symbols and gives error.
But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
Suggestions required urgently
Thanks in advance
Ram

Hello srikanth,
Check the code below.
I have used it in the update rule to replace the #### symbol with A.
But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
GV_STRING = COMM_STRUCTURE-/BIC/XXX
FIND '#' in R_STRING.
IF SY-SUBRC = 0.
REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
ENDIF.
result value of the routine
RESULT = R_STRING
Thanks
Ram

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

EVDRE encountered error retrieving the data from web Server

Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thanks

hi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Error #2190: The attempted load of failed as it had a Content-Disposition of attachment set.

I'm getting this error when I set the URL.
Error #2190: The attempted load of http://site.com/get_file_content.php?id=1000 failed as it had a Content-Disposition of attachment set.
Is there a way to force the content type on the client?
Here is the code I'm using:
            var resource:URLResource = new URLResource(path);;
            var element:SWFElement = new SWFElement(resource);
            mediaPlayer = new MediaPlayer();
            element.resource.mediaType = MediaType.SWF;
            mediaPlayer.media = element;
            mediaPlayer.addEventListener(MediaErrorEvent.MEDIA_ERROR, mediaErrorHandler);
            mediaPlayer.addEventListener(MediaPlayerStateChangeEvent.MEDIA_PLAYER_STATE_CHANGE, mediaPlayerStateChangeHandler);
            mediaPlayer.addEventListener(DisplayObjectEvent.DISPLAY_OBJECT_CHANGE, mediaPlayerDisplayObjectHandler, false, 0, true);
            protected function mediaPlayerDisplayObjectHandler(event:DisplayObjectEvent):void {
                var displayObject:DisplayObject = event.newDisplayObject;
                displayObject.width = 400;
                displayObject.height = 250;
                uicomponent.addChild(displayObject);
            protected function mediaErrorHandler(event:MediaErrorEvent):void {
                trace(event.error.detail);
                // Error #2190: The attempted load of http://site.com/get_file_content.php?id=1000 failed as it had a Content-Disposition of attachment set.
Message was edited by: thx1138

The problem is that the server script is treating the request as a request for a file to download, rather than as a typical HTTP request/response. You need to modify the server script so that it doesn't include the Content-Disposition header, there's not much you can do on the client side.

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

Error in the Data Transfer phase

Dear all,
During the Data Transfer phase, we get 117 errors.
The error for each failed process is:
Execution of program /1CADMC/OLC_500000000043327 failed, return code 3
Message no. DMC_RT_MSG046
RC = 3: Error writing the data
I compared the table structures in source and target system, and they are the same.
Therefore I suspect that something went wrong during the Data Selection phase.
Does anyone else have this problem?

Hi Nicolas,
Error code 3 suggests that there was a problem writing data to the receiver system. This may happen due to various reasons (For example: No tablespace available in the target system). To be sure, please check the System Logs (SM21) and Error Logs (ST22).
In oder to check if something went wrong during data selection, you may refer to the selection logs for the tables for which data transfer is aborted.
In case you are not able to identify the issue, kindly open an OSS Message for faster resolution of the problem.
Regards,
Suman

Spread the Data Loads in a SAP BW System

Gurus,
I want to spread the data loads in our BW system, as a BASIS person how do I identify the jobs if they are full loads or delta loads, our goal is to make the load on the system to be evenly distributed as we see too many data loads starting and running around the same time. Can you suggest a right approach to achieve our goal.
Thanks in advance
Siva

Hello Siva,
As already mentioned the solution is to include the different steps of the data flow, extraction , ODS activation , rollup etc
in process chains and schedule these chains to run at differet times so that they do not place too much load on the system.
If the problem is specific to data loads on the extraction step then I guess that maybe you see the resource problem on the
source system side, if you don't have the load distribtion switched on in the RFC connection to the source system it is
possible that you can specify that the source system extraxction jobs are executed on a particular application server,
please see the information in the 'Solution' part of the note 147104 and read it carefully.
Best Regards,
Des

Error in the data loading

Similar Messages

Maybe you are looking for