Error in the ICF node

When I attempt to test the WebDynpro WDT_QUIZ I get the following error message in Firefox and Internet Explorer:
Error in the ICF node
To log on, specific ICF nodes must be activated in transaction SICF
Check the following ICF nodes, as described in note 517484:
/sap/public/bc
/sap/public/bc/ur
Any ideas how I can fix this issue? I've had a look at the OSS note and the SICF transaction. It seems there isn't a node /sap/public/bc/ur so perhaps this is missing?
Thanks for any help.
JB

Fixed this issue now - the services under sap -> public in transaction SICF were deactivated. I activated them and the WebDynpro is now working correctly.
Cheers,
JB

Similar Messages

Message: the specified nodes are not clusterable

Hi,
I am geting message "the specified nodes are not clusterable" at the time of crs installation on solaris 10.
i have already configure ssh and configure properelly.
please suggest.
thanks
Anup

Hello IndiaDBA,
The id on OS groups and users are the same on all nodes?
Check Metalink note ID 338045.1
Error:*** Alert: The specified nodes are not clusterable. This could be due to one or more of the following reasons:
1. The user performing the install is not configured in an equivalent manner on all nodes.
2. ssh and scp are not configured properly on all nodes.
3. rsh and rcp are not configured properly on all nodes.
Do a simple test before proceed the installation
# Public
$ ssh node1 date
$ ssh node2 date
$ ssh nodeN date
# Priv
$ ssh node1-priv date
$ ssh node2-priv date
$ ssh nodeN-priv date
# Vip
$ ssh node1-vip date
$ ssh node2-vip date
$ ssh nodeN-vip date
Check Metalink note ID 300548.1 How To Configure SSH for a RAC Installation
Regards,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

The specified nodes are not clusterable

Hello,
I am trying to install RAC 10g,during the installation , i got error saying the specific nodes are not clusterable, i have checked below things on both nodes, node reachablity and node connectivity are successful.
ssh rac1 date
ssh rac1-priv date
ssh rac2 date
ssh rac2-priv date
Could you please help me, how to resolve this issue.
Thanks
Nitya
Edited by: user8773474 on Aug 28, 2009 8:32 AM

Hello Andy,
I searched the link to reward you, but i couldn't
Really thanks for you quick response,
Right now i can say helpful, i will download and try ,if it is working , then i will update you as correct.
Best Regards
Nitya

Log files under the admin node are getting filled up

I installed Sun One Web Server 7.o u3 in the following way:
a. Installed admin server on MC1
b. installed admin node on MC2.
c. When I started MC1 and MC2, the access log file (C:\Program Files\Sun\WebServer7\admin-server\logs) under the admin node MC2 is getting filled up with these messages for every 2 minutes:
MC1 IP ADDRESS - CN=admin-client-cert [24/Mar/2010:18:03:46 -0400] "POST /jmxconnector/remotejmx HTTP/1.1" 200 291
I checked for errors file under the admin server, and I did not see any errors, as such. Please help me to fix the problem. I installed node and server, as per guidelines
I have not installed any web app or deployed any config.
Thanks,
Phani

Joe,
That worked. Thanks a lot. 1 more thing. I made a new configuration, while migrating 6.1(SP2) instances.After deploying on MC1/MC2, and when I am trying to start the configuration on the instances, it is giving the following errors for both nodes MC1 & MC2:
ADMIN3584: Error while starting the server. Please check the server logs.
I ran the log mode with 'finest' level and it is showing following exceptions:
25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
com.sun.web.admin.exceptions.AdminException: ADMIN3584: Error while starting the server. Please check the server logs.
     at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:212)
     at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:198)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
[25/Mar/2010:17:55:28] info ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports: Exception : ADMIN3011: The operation failed with errors on the following nodes:
Node 'MC1.test.com':
ADMIN3584: Error while starting the server. Please check the server logs.
[25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
com.sun.web.admin.exceptions.MultiNodeException: ADMIN3011: The operation failed with errors on the following nodes:
Node ''MC1'
ADMIN3584: Error while starting the server. Please check the server logs.
     at com.sun.web.admin.mbeans.NodeMBean.doLifecycleAction(NodeMBean.java:84)
     at com.sun.web.admin.mbeans.NodeMBean.startServer(NodeMBean.java:299)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.web.admin.mbeans.BaseAdminMBean.invoke(BaseAdminMBean.java:49)
     at
Any help on this issue is appreciated.
Thanks,
Phani

Reg:bsp error in ICF node

hi ,
i had developed a BSP Application in sap 4.7 ,but when i test it iam getting the below error .
certain ICF nodes must be released in transaction SICF for the BSP Extensions HTMLB
SAP/BC/BSP/SAP/SYSTEM
SAP/BC/BSP/SAP/PUBLIC/BC
SAP/PUBLIC/BSP/SAP/PUBLIC/BC
could any one help me out regarding this issue.
Thanks & Regards
Satish.

In OSS note 517484 on https://websmp204.sap-ag.de/notes , and there we can find that for BSP following services should be activated!
Goto SICF Tcode & activate the below nodes:
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc (available for 620 with Support Package 34)
/default_host/sap/public/bc/ur (available for 620 with Support Package 34)
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)
Note: After you activate the BSP service, the corresponding application services must also be activated.
Raja T
Message was edited by:
Raja Thangamani

SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
Tanmay

Hello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh

I created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

Expanding and clarifying what BJD said;
After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
The technique of "create sub-VI...copy" always works for me.
There is one more thing that you should watch out for.
The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Error while adding the secondary node in shared APPL_TOP.

Hi,
We are getting the below error , when trying to add the secondary node in shared APPL_TOP .
We ran the commnad.
perl -I <AU_TOP>/perl txkSOHM.pl
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u2590/oracle/oaq5appl
Classpath : /u2590/oracle/oaq5comn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u2590/oracle/oaq5comn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u2590/oracle/oaq5comn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u2590/oracle/oaq5comn/java/appsborg2.zip:/u2590/oracle/oaq5comn/java
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/apps/ad/autoconfig/oam/CtxSynchronizerException
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1548)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
/u2590/oracle/oaq5comn/admin/log/oaq5_qn2lx793/txkSetSOHM_ac.log
txkSOHM.pl successfully completed
Regards

Hi,
Is this the complete error message?
Any more details about the error in the log file?
Do you have the latest AutoConfig patch applied?
Regards,
Hussein

Error while generating the context node

Hi ,
Requirement is to add the marketing attribute field under the Account details overview Page. As the field was not available in the context node i have added a new context node in the Account details. I used the wizard and added the context node BuilmktattributeRel so as i can add "Attribute set" under the BP overview page."
Now after adding the context node and while executing i am unable to see the overview view page, i am getting an error :
1. Component GET_ATTRIBUTE does not exist
2. Determination of BOL attributes failed
Also i am unable to regenrate the GET_I_method. If i want to delete the Zcontextnode, i am unable to do so.
Kindly help me with the technical approach to add the context node in the overview page.
Thanks in advance,
Sunil

One thread would have been sufficient.
Error while generating the context node

'Could not find the requested node error' when guests join the meeting room

I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
 // Event handler function for displaying the selected Alert button.
 private function alertClickHandler(event:CloseEvent):void {
 var queue:Array = pendingArray;
 if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
 var item:Object = pendingArray.shift();
 trace (item["label"]);
 trace (item["descriptor"].userID);
 if (event.detail==Alert.OK)
 //Admit user for chatting
 cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
 //Allow user to publish audio - supposed to be promoted through room setting
 //audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
 else //if (event.detail==Alert.CANCEL)
 cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
 .displayName [string]= k
 .userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
 .affiliation [number]= 5
 .role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
Ram

It is win 7 64 bit system and same error on Illustrator x86 and x64.

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
 at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
 at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
 at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The error is " The Mapping to Node has not been completed

Hi All,
I am getting a strange type of error and need help immediately.
The error is " The Mapping to Node COMPONENTCONTROLLER.1.PLANNING_ENTITY Has Not Been Completed" for the node that exists in the Parent component and is being used in all the child nodes thru reverse mapping.
I have done mapping in all the child nodes but still the message is coming.
Could anybody tell me the reason .
Regards,
Arti.

Basically somewhere you have defined a context node 'PLANNING_ENTITY' to be an Input-Element. At the same time you did not define (through a component usage at design time) where the input to that node is coming from. This means the mapping path to the node is not complete, and the node does not know where it is mapped to.
Either:
- You untick the checkbox 'Input-Element (ext.)' inside the controller context, or
- You find the component that uses the component with the node 'PLANNING_ENTITY' and select Component_Usage->'Name of Usage'->'Add controller usage'. Inside the controller menu you see then, you can now provide a mapping to the context node.
I realise this now sounds a little confusing, but I'm happy to provide more details should you need them.
Cheers,
Robin

Cannot add users to the Calendar Node error 0x13209

I cannot add new users to the Calendar node. I am receiving error 0x13209. Any advice??

You cannot add a user to a SAP group, create an enterprise user group and add both SAP group and AD user to that.

The VI closed the connection : error 1074360302 at property node(arg 1)

hi!
I'm trying to running a code which apply the control of my myRIO through a VI on my host computer. A video stream of data is also going to be send from myRIO to the Host Computer VI. However, I am getting the "Host Computer VI" closed the connection. I have no idea why.
And at the Host Computer keep giving out error 1074360302 occured at Property Node (arg 1) in myRIO vi.
I would be glad if someone could help me.
Thank you.
Attachments:
Picture1.png ‏81 KB

Hi e_pah,
Thanks for your response, what sort of camera are you using? This error has been previously seen with a Stingray camera when the IMAQ drivers aren't quite up to date.
So firstly, we need to make sure the IMAQ drivers are updated.
Further questions regarding your application:
Did this VI ever run?
Does this error occur everytime the VI is run?
What is the the property node doing?
Many thanks
Ingram

Gettig the error at the end of single node installation on OEL5.6 32-bit

Gettig the following error at the end of single node installation on OEL5.6(32-bit)
I am getting the following error enf of the single node installation on OEL5.6(32-bit). I have installed the following RPMs
rpm -Uvh sysstat
rpm -Uvh libaio-devel
rpm -Uvh compat-libstdc++
rpm -Uvh compat-libstdc++
rpm -Uvh xorg-x11-libs-compat-
rpm -Uvh unixODBC-2.2.
rpm -Uvh unixODBC-devel
rpm -Uvh libXp-
rpm -Uvh openmotif21
These are following failed, when I clicked the respective button I get these respective errors...
HTTP
checking URL = http://linux1.oracle.com:8001
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://linux1.oracle.com:8001/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
SP
checking URL = http://linux1.oracle.com:8001/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Please let me know how to fix this.
Thanks.
Joy.

Helios,
While starting the application I am getting the following...
============================================
[applprd1@linux1 scripts]$ ./adstrtal.sh
You are running adstrtal.sh version 120.15
Enter the APPS username: apps
Enter the APPS password:
The logfile for this session is located at /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Listener APPS_PRD1 has already been started.
adalnctl.sh: exiting with status 2
adalnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 204
adapcctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for PRD1 ...
Starting PRD1_0627@PRD1 Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/prd1/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for PRD1 on port 9301 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
adstrtal.sh: Exiting with status 4
adstrtal.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log for more information ...
===============================================
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for PRD1_linux1 adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server PRD1_linux1 adapcctl.sh Failed
Web Entry Point Services OracleTNSListenerAPPS_PRD1_linux1 adalnctl.sh Already Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance PRD1_linux1 adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance PRD1_linux1 adformsctl.sh Failed
Web Application Services OAFM OC4J Instance PRD1_linux1 adoafmctl.sh Failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPRD1_linux1 adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server PRD1_linux1 jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms PRD1_linux1 adformsrvctl.sh Disabled
Other Services Oracle Metrics Client PRD1_linux1 adfmcctl.sh Disabled
Other Services Oracle Metrics Server PRD1_linux1 adfmsctl.sh Disabled
Other Services Oracle MWA Service PRD1_linux1 mwactlwrpr.sh Disabled
ServiceControl is exiting with status 4
Thanks.
Joy.
Edited by: user11952526 on Jun 26, 2011 11:51 AM

Error in the ICF node

Similar Messages

Maybe you are looking for