Error in the Source system while data loding through Process Chain

Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
Javed

Hi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system  --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani..

Similar Messages

  • BE3.5 : Error from the source system while activating the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Arunabha,
    I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
    If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
    Cheers!

  • Conversion factor error in the source system

    Hi All,
    I got conversion factor error in the source system, when i tried to load maste data.
    can anybody help me in. It is urgent please...
    Thanks in advance
    Narendra

    Hi...Post the error
    Regards

  • Error occured in the Source system while loading mater data

    hi all
    While loadng the master data info package.The request is getting failed with error occured in the source system.
    error message says "<b>if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request</b>".
       I had tried repeating the Request but again It is getting failed.
       please help me resolving the issue.
      Thanks(=Points)
          Priya

    Hello Priya
    If u r loading thru flat file
    1. Check the correct path in infopackage
    2. Check if it is opened,if it is then close it and run package again
    If loading thru R/3
    1. Check DS is not opened in change mode
    2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
    3. Are you running init..then make sure no document is posted in R/3 side...
    Thanks
    Tripple k

  • Inbound idoc  error in the source system

    HI,experts
    I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem  seems ok since the source system is activated successfully in BW side.
      But when I check the inbound the idoc in source system  after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no  control information in the idoc which message type is RSRQST.
    how can i figure this issue out ?could anyone help me ?

    HI,ALL
    Thanks for your replies and documents.
      Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
      How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

  • Error in the Source System...

    Hi
      <b>RSA1-->Source System >(Context Menu)> Check</b>
    <b>Error:</b>
    <b>The BW IDoc type ZSBA011 is not the same as the source system 
    IDoc type ZSBD012                                                                               
    </b>                          
    Thanks

    Hi BW KING,
    This error due to RFC connect is not there between BW to Sorce system.
    OR else There is RFC connection mis match.
    You have to ask the BASIS People to correct the RFc connection between BW to your source system.
    Other wise data will not get it will show RFC connection Failed.
    Thanks,
    kiran.

  • Trfc error in the source system

    Hi,
    I got an error as trfc error in the souirce system,How to proceed regarding this.How to check RFC connections.What are the transaction codes for trfc and to check rfc connections.. please let me know.
    Many Thanks

    Hi,
    We are having some problems.
    While loading the data in BI 7.0 from R/3 ECC 6.0, sometimes (not always) IDOCs are getting stuck before coming to BW System.
    The job always finishes successfully from R/3 side but before coming to BI, IDOCs are getting stuck and we manually have to push them into BI System.
    How  to avoid the situation of IDOCs getting stuck and what could be the possible reasons.
    Please guide.
    Thanking You,
    Tarun Brijwani.

  • How to stop the data loads through process chains

    hi,
    I want to stop all the data loads to BI through Process chains where load happens periodic.
    kindly suggest how can I proceed.

    Hi,
    Goto RSPC find your PC and double click on START then change the timings, i.e. give starting date is 01.01.9999 like that Save and ACtivate the PC, it won't start till 01.01.9999.
    Thanks
    Reddy

  • Error in the source system for fiscal year variant K4 Period 00

    We are experiencing the following issue when loading data from module Flexible real estate RE-FX CASHFLOW CUBE OREFX_C06 Error in source system Fiscal year variant K4 is not defined for the period 00.

    Hi,
    You need to check in your source whether you have maintained Fiscal Yr Variant or not? Talk to you Functional person before you do the BI Extraction.
    In Table T009B
    You can check Fields
    MANDAT - client
    PERIV - Fiscal Year Variant
    BDATJ - Posting date YYYY
    BUMON - Posting date calendar month
    Check Table T009B and see if you fiscal variant is maintained for all periods of Years (as per error its not). maintain the same in Source system and transfer Global settings in BW to copy the same into BW system.
    @AK

  • How to determine the source of Events triggered in a process chain

    Hi ,
      We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains.  These events are raised via BP_EVENT_RAISE using the ABAP process type.
    However, our problem is to identify the source of these event trigger - i.e. which process chain triggered this event ?
    Looking at SM64, the event history does not display the source for these events.
    Is there any table or program that we can use to determine the source of these events which are triggered.
    Any help is much appreciated and points awarded.
    thanks
    BK

    Hi,
    do check in the program /SSA/BWT . or TCODE - ST13 -- enter BW-TOOLS and execute. -- Choose Process chains and execute --- Select the date and time for which you want to see the process chains and execute again.
    This will give you the entire list of process chains triggered, status, timings(start, end, overall runtime). Once clicked on the process chains it will show you the steps in theprocess chains, data loaded in the data targets, source system, etc...
    hope it helps.

  • How to load data targets through process chain

    hello gurus,
    i am new to bi7.0 environment,
    can anyone provide me step by step loading of data targets with the help of process chains.
    its very urgent
    thanks in advance
    bharath kumar

    Hi,
    After creating Start variant, select Data Targets in left side, find out which one you want to create PC. Drag and drop that Data Target ODS into right side, and select info package and ods activation.
    For Master data also the same you have select Attr Change run.
    Connect the links from Start variant to data targets.
    Check the below links:
    http://help.sap.com/saphelp_bw33/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/dc/c7e542de327276e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
    Business Intelligence Old Forum (Read Only Archive)
    Reg
    Pra

  • Error compiling the BPEL classes while configuring custom approval process

    Hi,
    I get the below error, but unable to fix this. Any one who did face this issue please share your thoughts to overcome this.
    Error(45,34): Failed to compile bpel generated classes.
    failure to compile the generated BPEL classes for BPEL process "ApprovalProcess" of composite "default/SelfRegistrationApproval!1.0"
    The class path setting is incorrect.
    Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
    Thanks,
    Bhaskar

    You need to keep all the custom jars at three places :
    1) Soa ext , and make sao extension jar by running ant
    2) Bpel classpath
    3) in your project as an external referrence

  • Processing error occured in the source system

    Hi Experts,
    I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
    In the source system apllication log the following warning message displyed.
    <u>No assignment of payroll data to BW month for country grouping 99</u>.
    I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
    If any one come accross this , please provide good inputs....
    Thanks & Regards
    Kumar

    I have the same problem.
    The following text is ment to help me.
    Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
    best regards
    Ingrid
    Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
    Diagnosis
    No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
    System Response
    The SAP standard "End Date of For-Period" is used for this country grouping.
    Procedure
    Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
    Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.

  • InfoSource  is not defined in the source system

    Hi,
        We are getting error 'InfoSource  is not defined in the source system' while extracting data from Planning book to Cube in APO.
    Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
    Please help me.
    Thanks
    Subba Rao

    Hello Subba,
    Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
    Best Regards,
    Des

  • Conversion factor error in the source sys

    Hi all,
    I got the following error message: " conversion factor error in the source sys" while loading data, can one give the solution? points will be given
    thanks

    Hi Ganesh,
    Could you try to tcode : rsa3 in your SAP Source system in order to test the extraction?
    If you get an error in that part, you need to check whether there is problem in conversion transformation/not .. ?
    Hopefully it can helps you a lot ganesh,
    regards,
    Niel
    (tks a lot for any points you choose to assign).

Maybe you are looking for