Error in transaction KEA0 during upgrade
Dear All,
During upgrading the custmer system from 4.7 to ECC 6.0 we found some error in the transaction KEA0 while trying to activate the cross client for an operating concern.
The activation logs says that there are the syntax errors in the gereted subroutine pool: RK2O0100.
I however corrected the error and activated the code but again when I am trying to execute the same it gave me the same error and when I go to the sub routine pool I found that the changes are again undone and the previos version is activated. This happens repeatedly that the code is corrected and activated by me and says no error and ones I log off and login again it says the same error.
Help will be appriciated.
Thanks iin advance....
Abhi...
Dear Raymond,
Thankds for your help..........
I tring to run RKEAGENV it shows the error message with STOP button saying that the field WTGBTR not contained in the nametab for table CE1E_B1 and when Io run RKEAGENF it gives a short dump saying that entry for CE10100 is not allowed for TTABS.....
Please help.
Similar Messages
-
Error in phase START_SHDI_FIRST during upgrade to ECC6
Hi Expert,
When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
Here is the log:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:18:28 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 2516
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Apr 08 17:18:29 2008
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:404
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Apr 08 17:18:32 2008
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Tue Apr 08 17:18:33 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:18:33 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code TEXTENV_INVALID.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function DoSetTextEnv Line 225.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when generating text environment..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
S *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c 113]
S T100-key: SY , type '65'
S variable 0: Error when generating text environment.
S Exitcode 4
S *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c 135]
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15883]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c 10169]
M
M Info for wp 21
M
M stat = 4
M reqtype = 5
M act_reqtype = 5
M rq_info = 8576
M tid = 21
M mode = 0
M len = 2040
M rq_id = 14
M rq_source = 1
M last_tid = 21
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M Adresse Offset Data from input buffer
M -
M 0000000010EE2C00 000000 00000000 02000000 4a000000 00000000 |........J.......|
M 0000000010EE2C10 000016 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C20 000032 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C30 000048 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C40 000064 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C50 000080 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C60 000096 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C70 000112 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C80 000128 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C90 000144 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CA0 000160 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CB0 000176 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CC0 000192 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CD0 000208 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CE0 000224 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CF0 000240 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D00 000256 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D10 000272 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D20 000288 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D30 000304 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D40 000320 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D50 000336 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D60 000352 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D70 000368 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D80 000384 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D90 000400 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DA0 000416 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DB0 000432 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DC0 000448 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DD0 000464 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DE0 000480 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DF0 000496 00000000 00000000 00000000 00000000 |................|
M -
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (5)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 021 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_tx=1)
B statistics db_con_rollback (roll_total=2, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c 327]
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:19:07 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 832
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X
X Tue Apr 08 17:19:08 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:3980
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171908 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E
E Tue Apr 08 17:19:09 2008
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M ThCheckPrevUser: reset spa state for user T21/U22/M0
M LOCK WP ca_blk 276
M LOCK APPC ca_blk 92
M set task type ZTTASPO
M ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 0
M ThCheckEmState: call EmContextAttach (em_hdl=0)
M ThRollIn: U22 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
M ThTSCancel: set T21/M0 in status MODE_CANCEL
M ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T21/U22/M0
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T21/U22/M0 has no cpic conns
M clean up all internal modes of T21/U22/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1357]
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThPageFree: free (22,0,0, mode = 3)
M ThRollFree: free (22,0,0, mode = 3)
M ThRmFree: cleanup resources for T21 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21 M0
M ThRmFree cleanup resources for T21
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21
M ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new MODE_REC = 0x40
M ThNewWpStat: set mode wait
M ThNewWpStat: new state of T21/M0 = 0x49
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThMkReq: send output to canceled mode
M ThDtWpBlk: detach WP ca_blk 276
M ThISend: complete stat record
M ThISend: stat_state = TH_STAT_WRITE
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 276
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
M -OUT- sender_id WORK_PROCESS tid 21 wp_ca_blk 276 wp_id 21
M -OUT- action SEND_TO_DP uid 22 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 49
M -OUT- req_info CANCELMODE
M REL APPC ca_blk 92
M ThDtAppcBlk: detach APPC ca_blk 92
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThISend: set inPrivMode = 0 for T21/M0
M ThSysUsrCheck (1,1): check system user T21/U22/M0
M ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T21
M DpITmSlotClear: clear slot 21
M DpListRemove: elem 21 not in tmadm_free_list
M DpListInsert: elem 21 already in tmadm_inuse_list
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M TrThHookFunc: called for task switch
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M save task type/act rqtype ZTTASPO/5 of T21/M0
M TskhLoop: switch back to normal tracel level 1
A
A Tue Apr 08 17:19:27 2008
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Tue Apr 08 17:19:28 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:19:28 2008
Please help me out!
Thank you very much!
Edited by: lucy YANG on Apr 8, 2008 11:31 AMCheck to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
How to Stop and Start Shadow sytem :
Stopping the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) stopshd
Alternatively, you can stop the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Starting the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) startshd
Alternatively, you can start the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM -
Error in appdstln.sql during upgrade to 12.1.1
Hi All,
I am upgrading my 11.5.9 ebs to 12.1.1 I have gone through all steps outlined in chapter 3 of Oracle® E-Business Suite
Upgrade Guide Release 11i to 12.1.3 Part No. E16342-03. I am now in point number 10 under " Perform the Upgrade" i.e :
Run the American English upgrade patch driver which is (u6678700.drv)
After going through nearly 130,000 jobs I got the following error in appdstln.sql
ORA-01400: cannot insert NULL into("AP"."AP_PAYMENT_HIST_DISTS"."INVOICE_DISTRIBUTION_ID")
Please help me get through this error asap as we are very low on time.Please log a SR as no similar issues are reported in MOS website.
Thanks,
Hussein -
Some errors about spatial objects during upgrade to 9.2.0.8
Hi all,
I installed the 9.2.0.8 patch and upgraded my 9.2.0.7 database to 9.2.0.8 and got some error messages, ORA-29832 and ORA-29844 when the scripts were updating some Spatial objects. The database seems to work properly however after the upgrade, including the Spatial operations. Do I need to worry about those messages? In some 10g upgrade documents, it said similar messages could be ignored. Did I just miss the same information somewhere in the 9.2.0.8 documentation set?
Regards,
Matti SirenTry to compile the database objects with the utlrp.sql script, verify the version left by the upgrade process at the DBA_REGISTRY view.
~ Madrid. -
Error while runnning autoconfig on apps tier during upgrade
Hi,
Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
below is the error message.
Enter the APPS user password :
The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u01/app/tinst/tinstappl
Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
Context Value Management will now update the Context file
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
... 8 more
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
/u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
Please let me know your suggestions to resolve this issue.
Regards,
Sreenivasulu.Hi,
DB tier autoconfig was successfully completed.
We have already checked the above mentioned metalink ID's, but still the issue is same.
Can you please advice any other solutions.
Regards,
Sreenivasulu. -
Error during Upgrade from 4.6c to ECC 6.0
Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar KHi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar -
Errors during upgrade/installation af icloud 4.02
When I try to upgrade icloud 3.1 to 4.02 with Apple Software Update I get this error message:
There were errors during the installation of the updates. If the problem persists, choose Tools> Download Only and try installing manually.
When I try to install manually I receive this error message:
Windows Installer
Error transformation. Make sure that the indicated transforming path is valid.
I have also tried to uninstall 3.1 and run the installation of 4.x but it still fails.
This error is happening on several of my Windows 7 32bit
I hope anyone can help me solving this error :-)When I try to upgrade icloud 3.1 to 4.02 with Apple Software Update I get this error message:
There were errors during the installation of the updates. If the problem persists, choose Tools> Download Only and try installing manually.
When I try to install manually I receive this error message:
Windows Installer
Error transformation. Make sure that the indicated transforming path is valid.
I have also tried to uninstall 3.1 and run the installation of 4.x but it still fails.
This error is happening on several of my Windows 7 32bit
I hope anyone can help me solving this error :-) -
Error in phase SCEXEC_ALIAS in upgrade process(during preprocessing)
Hi all experts,
i encountered error during upgrade from 4.7 to ecc 6
with message :
severe error during SCEXEC_ALIAS phases
file /usr/sap/<SID>/upg/abap/log/PTALDC00.LOG not found
below is some related log content for this error:
tail log of ULOG11_2
Phase SCEXEC_ALIAS:
<sid>adm 20110527220015 : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC00.XQL DBEXECNONT DBEXECNOCHECK (pid=512002)
<sid>adm 20110527220016 : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC01.XQL DBEXECNONT DBEXECNOCHECK (pid=1204298)
<sid>adm 20110527220017 :/usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC02.XQL DBEXECNONT DBEXECNOCHECK (pid=675990)
tail log of SLOG701
Phase SCEXEC_ALIAS:
ERROR: Connect to <SID> failed (20110527190129, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190130, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190131, probably wrong environment).
my questions are:
1. where is the environment variable stored during this phase which is used by tp tool?
i have checked the profile EXDBNEW.TPP and compared it with other profile in the same directory which have been used by tp before(phases before this one), which resulted in no different for every environment related value.
2. i tried to emulate the execution of the command in ULOG11_2 with default environment of <sid>adm with adjustments(e.g db_ora_scheme=SHDTMP, DIR_LIBRARY= /usr/sap/<SID>/abap/exenew) it run with no error of wrong environment whatsoever >.<, so can i just point the environment scheme to <SID>SHD and executed it manually?well, actually i did not looking at the right place at the error , my apologize for that.
there are another error messages at this log file SCEXEC_A.ECO
TRACE-INFO: 68: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=110b1b588) 20 0.209414
TRACE-INFO: 69: [dev trc ,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
TRACE-INFO: 70: 11 0.209425
TRACE-INFO: 71: [dev trc ,00000] - oci_bind ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=9001000a10b6ea2,ip=0,rlp=0,rcp=0)
TRACE-INFO: 72: 21 0.209446
TRACE-INFO: 73: [dev trc ,00000] - oci_bind ( 1: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffd978,ip=0,rlp=0,rcp=0)
TRACE-INFO: 74: 14 0.209460
TRACE-INFO: 75: [dev trc ,00000] -->oci_define ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffda78,ip=fffffffffffd7a0,rlp=0,rcp=0)
TRACE-INFO: 76: 13 0.209473
TRACE-INFO: 77: [dev trc ,00000] -->oci_define ( 1: SQLT_AFC, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffdb78,ip=fffffffffffd7a2,rlp=0,rcp=0)
TRACE-INFO: 78: 16 0.209489
TRACE-INFO: 79: [dev trc ,00000] -->oci_execute_stmt(con_hdl=0, stmth_p=110b1b588, iters=1, rowoff=0, dml_batch_errors=0)
TRACE-INFO: 80: 13 0.209502
TRACE-INFO: 81: [dev trc ,00000] OCIStmtExecute() completed, rc=100=OCI_NO_DATA, no further data 8738 0.218240
TRACE-INFO: 82: [dev trc ,00000] -> rc=1403=OCI_ERR_NOT_FOUND 18 0.218258
TRACE-INFO: 83: [dev trc ,00000] <--oci_execute_stmt(rc=1403, iters-errors = 1-0) [time 0,009s] 11 0.218269
TRACE-INFO: 84: [dbsloci. ,00000] *** ERROR => ORA-1403 when accessing table SAPUSER 15 0.218284
TRACE-INFO: 85: [dev trc ,00000] set_ocica() -> SQL code 1403 8 0.218292
TRACE-INFO: 86: [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1403) 7 0.218299
TRACE-INFO: 87: [dev trc ,00000] OCIErrorGet -> SQL error code: 1403 20 0.218319
TRACE-INFO: 88: [dev trc ,00000] ORA-01403: no data found
TRACE-INFO: 101: [dev trc ,00000] Assigning username to user session: con_hdl=0, usrhp=110c09428 8 0.219570
TRACE-INFO: 102: [dev trc ,00000] Assigning password to user session: con_hdl=0, usrhp=110c09428 12 0.219582
TRACE-INFO: 103: [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPR3SHD/<pwd>, svchp=110b045e0, srvhp=110b05e88, usrhp=110c09428)
TRACE-INFO: 104: 133 0.219715
TRACE-INFO: 105: [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 6298 0.226013
TRACE-INFO: 106: [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 28000: 11 0.226024
TRACE-INFO: 107: [dev trc ,00000] ORA-28000: the account is locked
TRACE-INFO: 108: 10 0.226034
TRACE-INFO: 109: [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=110b05e88) 8 0.226042
TRACE-INFO: 110: [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=110b045e0,srvhp=110b05e88) 9 0.226051
TRACE-INFO: 111: [dev trc ,00000] Deallocating server context handle 110b05e88 from con_hdl=0 176 0.226227
TRACE-INFO: 112: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '28000' 14 0.226241
TRACE-INFO: 113: [dev trc ,00000] set_ocica() -> SQL error code 28000 7 0.226248
TRACE-INFO: 114: [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=28000) 7 0.226255
TRACE-INFO: 115: [dev trc ,00000] OCIErrorGet -> SQL error code: 28000 8 0.226263
TRACE-INFO: 116: [dev trc ,00000] ORA-28000: the account is locked
TRACE-INFO: 117: 10 0.226273
TRACE-INFO: 118: [dblink ,00433] ***LOG BY2=>sql error 28000 performing CON [dblink#4 @ 433] 22 0.226295
TRACE-INFO: 119: [dblink ,00433] ***LOG BY0=>ORA-28000: the account is locked [dblink#4 @ 433] 8 0.226303
From the log, the problem actually lies in authorization for ops$user + locked shadow user account. After corrected these problems, the process continued. But this still bother me how this error came up since other tp processes(phases before this one) run successfully. But i will mark this question as answered. Thanks for all the attention and hope this will help others too ^^. -
Errors in DDIC Activation phase during upgrade.
Hi,
Title: Errors in DDIC Activation phase during upgrade.
During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
1 ETP111 exit code : "8"
We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter". How to go about it?
If it is Shadow System, how can i unlock the system?
Many thanks,
Mohan.Dear Mohan,
There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
The search helps can be deleted manually in the shadow instance.
In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
You should do this step for all data elements shown in the log ACTUPG.ELG:
For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
1. Goto SE11:
2. Select Data type and fill "/BI0/OICH_AT" and display
3. Select the tab "Further Characteristics" and
4. Remove the values for fields "Name" and "Parameters"
then click on icon "Activate"
Please do the same for the other object.
But before performing above steps you need to unlock the shadow instance by the following command:
SAPup unlockshd <SID>
(if using SAPup)
SAPehpi unlockshd <SID>
(if using SAPehpi)
Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
SAPup lockshd <SID>
(if using SAPup)
SAPehpi lockshd <SID>
(if using SAPehpi)
You can logon to your shadow system with any different user than DDIC.
Best Regards,
Abhishek
Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM -
I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?
Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS. -
Hi,
During upgradation I got error at SACT_700 with following log
Activate lock object "E_BAMMAPNG"
4EEDI751 Base table "BAMMAPFCGR" of the lock object is not active
4 EDI813 Lock object "E_BAMMAPNG" not activated
4 EDI806XActivate lock object "E_BAMUIBT"
4EEDI751 Base table "BAMUIB" of the lock object is not active
4EEDI751 Base table "BAMUIBT" of the lock object is not active
4 EDI813 Lock object "E_BAMUIBT" not activated
When I looked at the base table it is already active.
And also with the following error log
Activate search help "Z_KSTAR"
4EEDH163 Search help parameter "SPRAS" does not occur in the selection method
4WEDH187 Default value "'EN'" does not suit the type of search help parameter "SPRAS"
4 EDH109 Search help "Z_KSTAR" was not activated
4 EDH102XActivate search help "Z_SKA1"
4EEDH163 Search help parameter "SPRAS" does not occur in the selection method
4WEDH187 Default value "'EN'" does not suit the type of search help parameter "SPRAS"
4 EDH109 Search help "Z_SKA1" was not activated
but when I checked the search help it is consistent & I want default value EN to be specified.
EDT402 Append structure "ZAKKAPARA_TA" appended to table "KKAPARA_TA"
4WEDT191 Enhancement category "3" possible, but include or subty. not yet classified
3EEDT963 Field "MAKTX" in table "KKAPARA_TA" is specified twice. Please check
3 EDT015 Dependent table "KKAPARA_TA" was not activated
but the field MAKTX is specified once in KKAPARA_TA but from appended structure ZAKKAPARA_TA.
Regards,
Karthik.kHi Karthik,
Kindly check the versions of E_BAMMAPNG and E_BAMUIBT. if you find Modif and Active version, then lock objects are not in active mode.
open the object in edit mode, check the object and activate it.
in search help Z_KSTAR and Z_SKA1, check if SPRAS is used as IMPORTING and/or EXPORTING parameter. remove the check of IMPORTING or EXPORTING parameter, save and activate the search help
MAKTX is available in KKAPARA_TA, hence remove it from ZAKKAPARA_TA. save and activate the structure and table.
after each modification, adjust and activate the database.
regards
Rahul. -
WRT54GX Version1 Firmware Error "Error(12) about length during file upgrade"
Does anyone know how to solve the following firmware upgrade problem. About 1/10 the way into the firmware upgrade I get the following error message "Error(12) about length during file upgrade".
THanks
Jim
Message Edited by NasoShow on 01-27-2008 07:55 AMYes, I have an original that doesn't list the version number, but I chose version 1.
-
Can we activate Classic General Ledger in ECC6.0 during upgrade from 4.6C
Dear SAP Gurus,
Greetings
My Client's technical team had upgraded their system from 4.6C to ECC6.0 and they had activated classic GL instead of New GL. And they had also activated classic withholding tax in place of Extended Withholding tax.
They are facing some error during posting of transactions (like generation of excise invoices, posting of WHT transactions, etc.) I told that it can be a reason of not activating New GL.
Is my understanding correct...?? Can we activate classic GL during upgrade from 4.6C to ECC6.0...??
In case of a new client built (with ECC6.0), can we activate the classic GL instead of the New GL..??
Does the system will work correctly in the long run if they had activated classic GL and classic WHT...??
Please clarify. Thanks in advance for your time and efforts
Regards,
Chaps
P.S. Points will be awarded for answers !!Hi,
I think that you should read long text of OSS note 999614 carfully and you are
aware of the fact that you will have additional migration efforts in
case you need to migrate to new G/L later on.
In case you are convinced that this is the best way please feel free
to deactivate new G/L as described in note 999614.
Please make sure that you deactivate new G/L in all clients of your
new system in case there were already client copies done.
Yes this is possible and I would not automatically assume that
error during posting of transactions are due to New GL not being activated.
Note 756146 documents the issue and possible repercussions
of using Classic GL.
In the case of a new installation the new G/L accounting
is active by default in ERP. In principle, the use
of the classic GL is also possible for new customers, however,
SAP does not recommend it since this requires an additional
migration expense in later years.
Regards,
Aidan -
Hi Folks,
In System logs, daily I am encountering the message as "Error in transaction data".
The messages are listed in SM21 in sequence as -
Error processing batch input session PMFMASSIGN
> Queue ID: 07011706105177351507
> Transaction no. 1, block no. 1
> Error in transaction data
On more detailed analysis, after drilling further through each message I found the following message relevant -
Documentation for system log message D2 0 :
Entry relating to an error during the processing of a batch input session. In the batch input session the data for the next transaction is requested. However, the data read is no transaction data. The session has probably been destroyed in the database.
Please explain as why the issue is occuring. I remember some time back, I executed RSBTCDEL2 on Production to clear invalid batch sessions but had to terminate due to long run.
Kindly help me fix this.
Regards,
NickOne interesting discovery I just found in R/3, was this job log with respect to the above process chain:
it says that the job was cancelled in R/3 because the material ledger currencies were changed.
the process chain is for inventory management and the data load process that get cancelled are for the job gets cancelled in the source system:
1. Material Valuation: period ending inventories
2. Material Valuation: prices
The performance assistant says this but I am not sure how far can I work on the R/3 side to rectify this:
Material ledger currencies were changed
Diagnosis
The currencies currently set for the material ledger and the currency types set for valuation area 6205 differ from those set at conversion of the data (production startup).
System Response
The system does not allow you to post transactions after changing the currency settings to ensure consistency.
Procedure
Replace the current settings with the those entered at production
start-up.
If you wish to change the currency settings, you must use programs to convert data from the old to the new currencies.
Inform your system administrator
Anyone knowledgable in this area please give your inputs.
- DB -
Disck Space not enough during upgrade CUCM 9.1(2)SU1 to 9.1(2)SU2a
Hi,
I face an issues during upgrade my current CUCM 9.1(2)SU1 to 9.1(2)SU2a, it show with this error message "There is not enough disk space in the common partition to perform the upgrade, for steps to resolve this condition please refer to CUCM 9.1(1) release notes or view defect CSCuc63312 in bug toolkit on Cisco.com". I had check the bug id and got 2 way to do it:-
1. reduce the amount of traces on the system, but I not ready want to do this
2. install a COP file name: ciscocm.free_common_space_v1.0.cop.sgn
If I select option 2, will it have any risk? Is it mean 9.1(2) - inactive version will be clear out from disk space or it will clear out 2 version - active and inactive version from disk space?
I need have some advice on this before I perform.
Thanks.Hi,
As per the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_011.html
You will not be able to switch to the previous version after the COP file is installed. For example, if you are upgrading from Cisco Unified Communications Manager 9.0(1) to Cisco Unified Communications Manager 9.1(1) and the previous version is Cisco Unified Communications Manager 8.6, the COP file clears the space by removing the 8.6 version data that resides in the common partition. So after you apply the COP file, you will not be able to switch to the 8.6 version."
Additionally, regarding the first option, if you do not want to reduce the tracing levels you can still delete some old traces using RTMT which gives you an option of deleting the traces from the server as well as transferring / downloading them to your pc simultaneously by checking the 'delete from server' option on last page of log file collection option.
HTH
Manish
Maybe you are looking for
-
how can i change the apple ID in my 2nd hand macbook air, i have no more contact with the first owner. thanks i already have an apple ID, but it seems that the original ID is locked to the first owner.
-
How to add sub pages in iWeb templates
Anybody knows how to add a sub pages in the templates? I want to add sub pages under the main header, e.g. "About Us."
-
Convert StringBuffer to char*
Hi, I try to convert a StringBuffer field to a char* in C++. But it doesn't work at all. I try to get the String of the StringBuffer and then convert this String with UTF. I post my code. If anyone can help, please .... jfieldID fidLoN = env->Ge
-
Hello, Having seen various instances of the EXTRACT command in some legacy code I've got around to trying out this command but I can't get it to work properly. Here's some condensed test code I've put together: TABLES: VBAK, VBAP. FIELD-GROUPS: HEADE
-
Default values to be populated in the search option ' Equip by equip list'
All Experts, I am running the transaction code IE01 to create a equipment. While creating, i would like to select a reference equipment. When i am doing so, there are so many included search options are displayed. Now, there are two queries from here