Error in transferring - Proc. type does not exist

Hi Experts,
I have created a Shopping Cart in SRM portal expecting to create a PO in R/3 Back-end. But Shopping Cart ended up with "Error in-process".
I went to BBP_PD and got the GUID. Then the GUID is given in FM "BBP_PD_SC_TRANSFER" and done debugging and foound where failure in transfer is occuring as Proc. type 'EC' not found".
But the Purchasing Group that I am using has attribute "Document Type in R/3" as EC and in R/3 back-end has document type EC defined and number ranges are assigned to it.
Is there any other place where I need to configure the document type "EC".
Please advice.
Thanks & Regards

The transfer process failing at as no enties found for process type "EC" in below tables.
BBPC_PROC_TYPE
BBPC_CTRL_PAR
Could you please suggest where do I need make an entry in "Define Transaction Type" in SPRO-SRM_Cross-Application settings.
Thanks & Regards

Similar Messages

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

Trip type does not exist in the system (T702G)

Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
sam

If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
there in the tri provision variant you need to enter the variant you have created.
Under that select the travel planning trip schema PL.
on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Error DDIC Type does not exist

Hi All:
I got the following error in my CAF application:
com.sap.caf.rt.exception.CAFBaseRuntimeException: DDIC type does not exist: com.agile.pmg.simpletypes.tp_proposal
The problem is that this type already exist in the dictionary, and I don´t know what is the problem.
Any ideas?
regards

The Base is ECC 6.0 not yet upgraded to EHP
Anyways SAP has helped solve the problem.
Below is the solution :
3. You can use program ABADRCHECK to analyze the inconsistencies in the derivation. By selecting the checkbox 'DELSTEPS', you can automatically delete the steps recognized as inconsistent. Check the result carefully before you set this parameter. The check should always occur for all clients, that is, the checkbox 'ALLCLNTS' should remain selected.
HOW TO FIX CURRENT CLIENT COPY
(All steps to be performed in target logical system)
1. Decrease workload as much as possible
2. Execute report ABADRCHECK with selected 'DELSTEPS'
(see note 653314 for more details) -- Check point 3 above.
3. Execute TCode FINB_TR_EXEC_AI (Postprocessing of Client Copy) (Please note that any changes done between Client Copy and executing TCode FINB_TR_EXEC_AI will be overwritten!)
4. Result of FINB_TR_EXEC_AI execution
a) Executed with same error DA 300
The workload is still to high, make sure that workload is decreased and repeat steps 1. - 3.
b) Executed without any errors
Consider FINB-TR-DERIVATION part of Client Copy as completed successfully. Note, that status of Client Copy in TCode SCC3 "Post-Processing Required" is final and it's not updated based on successful execution of FINB_TR_EXEC_AI.
Information about final Client Copy status need to be evaluated and kept outside of SAP system. Or optionally, the client can be protected against any further manually triggered post processing procedure (e.g. using TCodes FINB_TR_EXEC_AI, FINB_TR_DISPLAY etc.) using the IMG activity "Complete Postprocessing". It's suggested to do so, when Client Copy is successfully repaired by repetitive execution of post processing procedure.
WHAT TO DO BEFORE NEXT CLIENT COPY
Make sure that there will be no performance issues during Client Copy processing in target logical system.

Tried to add JUnit Test in Eclipse -- "Test type does not exist" error

Hi guys,
I'm developing an assignment whose details I won't bother going into -- it's enough to say that we were introduced to JUnit testing a couple of weeks ago in university tutorials, and I've stupidly tried to add one to my project without fully understanding it all. This is in eclipse 3.1.1.
Basically, I followed eclipse's built-in tutorial called "Writing and running JUnit tests ".
1) Created class "TestFailure" with method "testFailure".
public void testFailure() throws Exception {
fail();
} 2) This then appeared as a .java file in my project (as well as on my UML diagram, courtesy of Omondo's UML plugin).
3) I decided it was too risky mucking around with this stuff in a "live" project, so went ahead and deleted the TestFailure icon on my class diagram.
4) I closed down eclipse.
5) I went ahead and deleted TestFailure.java and TestFailure.class from my project folders.
6) I opened my project again, and tried to execute...
... and now I keep getting a Test type does not exist error when I try and run it.
How on earth do I get rid of this?
Any advice/guidance is greatly appriciated -- oh, how I wish I'd not started messing with JUnit testing!!! :)

Um, okay -- I fully hold my hands up and admit that I don't know what I'm doing with JUnit testing (we only had a half hour intro to it) but figured I may as well learn by using the official tutorials. It's always a good place to start! Although obviously using a current assignment isn't the best idea ;)
I was executing my main class (obviously with my main method in there) to execute the program after I'd deleted test case classes, but strangely I've just shut down my machine and restarted and it's working fine. I'm not sure what the deal is here -- lesson learnt though, study new topics on a dummy project! :)
Anyway, if I waited until I understood the software and code I'm producing to its fullest, I think hell'd freeze over before I executed any code! :) Using a tutorial to learn a new aspect of software I'm already familiar with wasn't a bad move, IMHO. Just using it on this particular project was... Needless stress and all that.

CIF: Business Partner Type does not exist

I am transferring vendor from ECC to SCM both as vendor and partner. While activating the integration model I get an error saying that <Business Partner Type does not exist, choose either 1 or 2 or 3>. Has anyone come across this error and solved it?

Dear Tibor,
These setting are maintained in system. Still it gives error.
Followings are the entries in system:
TB039A
CLIENT TYPE   CATEGORY XPROPOSE XPERSON XORGANISATION XGROUP TEXT
750    BUP001 BUP001                    X                    Dun & Bradstreet Number
750    BUP002 BUP002                    X                    Commercial Register Number
750    BUP003 BUP003                    X             X      Register of Associations Number
750    BUP004 BUP004                    X             X      Public Register of Cooperatives Number
750    BUP005 BUP005                    X                    Global Location Number
750    BUP006 BUP006                    X                    Standard Carrier Alpha Code
750    CRM001 CRM001            X       X             X      External System Identifier
750    CRM002 CRM002            X       X                    R/3 Customer Number
750    CRM003 CRM003            X       X                    External System Identifier for ICM
750    CRM004 CRM004            X       X                    R/3 Vendor Number
750    CRM010 CRM010                    X                    R/3 Sales Organization
750    CRM011 CRM011                    X                    R/3 Plant Number
750    CRM012 CRM012                    X                    R/3 MRP Area
750    FS0001 FS0001            X                            Identity card
750    FS0002 FS0002            X                            Passport
750    SLLIAT SLLIAT                    X                    IATA Code Airline Carriers
750    SLLSCA SLLSCA                    X                    SCAC Code (Standard Carrier Code)
ID Types
BUP001     Dun & Bradstreet Number
BUP002     Commercial Register Number
BUP003     Register of Associations Number
BUP004     Public Register of Cooperatives Number
BUP005     Global Location Number
BUP006     Standard Carrier Alpha Code
CRM001     External System Identifier
CRM002     R/3 Customer Number
CRM003     External System Identifier for ICM
CRM004     R/3 Vendor Number
CRM010     R/3 Sales Organization
CRM011     R/3 Plant Number
CRM012     R/3 MRP Area
FS0001     Identity card
FS0002     Passport
SLLIAT     IATA Code Airline Carriers
SLLSCA     SCAC Code (Standard Carrier Code)
Identification Categories
BUP001     Dun & Bradstreet Number
BUP002     Commercial Register Number
BUP003     Register of Associations Number
BUP004     Public Register of Cooperatives Number
BUP005     Global Location Number
BUP006     Standard Carrier Alpha Code
CRM001     External System Identifier
CRM002     R/3 Customer Number
CRM003     External System Identifier for ICM
CRM004     R/3 Vendor Number
CRM010     R/3 Sales Organization
CRM011     R/3 Plant Number
CRM012     R/3 MRP Area
SLLIAT     Airline Carrier IATA Code
SLLSCA     SCAC Code (Standard Carrier Code)
Thanks and Best Regards, Manoj

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Source System Activation - IDOC Type does not exist

I'm doing a new installation of BI7 and when I want to activate the source system on replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
Any solution?

Check my reply
Re: "Basic Type Does Not Exist"

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Error in transferring - Proc. type does not exist

Similar Messages

Maybe you are looking for