Error in Transporting

Hi Everyone,
I had enhanced a Cube and ODS with some new objects and it failed while transporting from BWD to BWQ with errors mentioned below. I had kept the cube and its update rules in the same transport. Does this has anything to do with the failing? If not what possibilities do you see for the transport to fail.
Transport BWDK914717 failed with an error code 8 (first time it failed with error code 12 sequence was not correct)
Transport BWDK914718 ended with warnings (first time it failed with error code 8 due to sequence)
Transport BWDK914719 was successful.
Log File:                /usr/sap/trans/log/BWDR914717.BWQ
/     Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20090302144640
           Start of the after-import method for object type R3TR ROUT (Activation Mode)
           Start of the after-import method for object type R3TR CUBE (Activation Mode)
           Start of the after-import method for object type R3TR UPDR (Activation Mode)
           Error when activating update rule 26Q6HBLWHU7F92D4Q4I6AL4FJ
           Activation of the update rules for 0CRM_C04 80CRM_OPPH
           IC=0CRM_C04 IS=80CRM_OPPH error when checking the update rules
           Activation of the update rules for 0CRM_C04 80CRM_OPPI
           Program GP38Y0YLBDIBAK8HTF2A0GU8YHS successfully activated
           Program GP36TAT9CS4XJW3BMUUMAXZXBC0 successfully activated
           Activation of the update rules for 0CRM_C04 80CRM_OPPI was successful.
           Start of the after-import method for object type R3TR UPDR (Delete Mode)
           Update rules 26Q6HBLWHU7F92D4Q4I6AL4FJ read in version M
           Update rules 32JUILFLE62JSZ9QFAVWBA10G read in version M
        Start of the after-import method for object type R3TR CUBE (Delete Mode)
         Start of the after-import method for object type R3TR ROUT (Delete Mode)
     /     Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
           RS_AFTER_IMPORT belongs to package RS
     /     The errors affect the following components:
     /        BW-WHM (Warehouse Management)
     /     Post-import method RS_AFTER_IMPORT completed for CUBE L, date and time: 20090302144846
           Post-import methods of change/transport request BWDK914717 completed
                Start of subsequent processing ... 20090302144640
                End of subsequent processing... 20090302144846
Thanks,
Kumar.

Hi Kumar Saurabh
It seems to be there is some thing missed up with the sequence please follow the below steps
1)take the new info object into one transport if the info object is not yet exist if exist then ignore this.
2)Including in the ODS and its update rules or transformations into one transport.
3) Take the cube into new transport along with the update rules or transformations from ODS to CUBE .
Import the transports like 1>2->3
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
kumar saurabh wrote:
> Hi Everyone,
>
> I had enhanced a Cube and ODS with some new objects and it failed while transporting from BWD to BWQ with errors mentioned below. I had kept the cube and its update rules in the same transport. Does this has anything to do with the failing? If not what possibilities do you see for the transport to fail.
>
> Transport BWDK914717 failed with an error code 8 (first time it failed with error code 12 sequence was not correct)
> Transport BWDK914718 ended with warnings (first time it failed with error code 8 due to sequence)
> Transport BWDK914719 was successful.
>
>
>
> Log File:                /usr/sap/trans/log/BWDR914717.BWQ
>
>
>      /     Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20090302144640
>
>            Start of the after-import method for object type R3TR ROUT (Activation Mode)
>
>            Start of the after-import method for object type R3TR CUBE (Activation Mode)
>
>            Start of the after-import method for object type R3TR UPDR (Activation Mode)
>
>            Error when activating update rule 26Q6HBLWHU7F92D4Q4I6AL4FJ
>
>            Activation of the update rules for 0CRM_C04 80CRM_OPPH
>
>            IC=0CRM_C04 IS=80CRM_OPPH error when checking the update rules
>
>            Activation of the update rules for 0CRM_C04 80CRM_OPPI
>
>            Program GP38Y0YLBDIBAK8HTF2A0GU8YHS successfully activated
>
>            Program GP36TAT9CS4XJW3BMUUMAXZXBC0 successfully activated
>
>            Activation of the update rules for 0CRM_C04 80CRM_OPPI was successful.
>
>            Start of the after-import method for object type R3TR UPDR (Delete Mode)
>
>            Update rules 26Q6HBLWHU7F92D4Q4I6AL4FJ read in version M
>
>            Update rules 32JUILFLE62JSZ9QFAVWBA10G read in version M
>
>         Start of the after-import method for object type R3TR CUBE (Delete Mode)
>
>          Start of the after-import method for object type R3TR ROUT (Delete Mode)
>
>      /     Errors occurred during post-handling RS_AFTER_IMPORT for CUBE L
>
>            RS_AFTER_IMPORT belongs to package RS
>
>      /     The errors affect the following components:
>
>      /        BW-WHM (Warehouse Management)
>
>      /     Post-import method RS_AFTER_IMPORT completed for CUBE L, date and time: 20090302144846
>
>            Post-import methods of change/transport request BWDK914717 completed
>
>                 Start of subsequent processing ... 20090302144640
>
>                 End of subsequent processing... 20090302144846
>
>
>
> Thanks,
> Kumar.

Similar Messages

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Error while transporting Infocube

Hello all,
i am getting following error while transporting infocube to testing system.
Please see the bellow error message details.
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZMD_Y_MR2)
Structure change at field level (convert table /BIC/FZMD_Y_MR)
Table /BIC/DZMD_Y_MR2 could not be activated
Table /BIC/FZMD_Y_MR could not be activated
Return code..............: 8
Following tables must be converted
ZMD_Y_MR InfoCube could not be activated
Thanks in advance.
BR,
YVReddy

Dear Venkat,
Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
regards,
Srini

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

Error while transporting Transformation: Syntax error in Start Routine

Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
Ram

Hi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

Error at transport in select option   is not followed by itab or value list

Hi All,
I have an issue with the following inner join. when i check with code inspector it is not showing any errors but i get the following error while transport.
"The In operator with SO_MATKL is followed neither by an Internal table nor by a value list".
This error appears after the system is unicode enabled is that it have any unicode significance please advice on this.
The following is the code snippet.
SELECT amatnr amtart aextwg amatkl bwerks bdispo b~ekgrp
    INTO TABLE tb_mara
    FROM mara AS a
   INNER JOIN marc AS b ON amatnr = bmatnr
   WHERE a~matnr IN so_matnr
     AND a~mtart IN so_mtart
     AND a~extwg IN so_extwg
     AND a~matkl IN so_matkl
     AND b~werks IN so_werks
     AND b~dispo IN so_dispo
     AND b~ekgrp IN so_ekgrp.

Hi Gopal
Am on UNICODE Enabled system and i dont have problem with below code. Please check, if you have used similar to this???
tables: mara, marc.
select-options: so_matnr for mara-matnr,
                so_mtart for mara-mtart,
                so_extwg for mara-extwg,
                so_matkl for mara-matkl,
                so_werks for marc-werks,
                so_dispo for marc-dispo,
                so_ekgrp for marc-ekgrp.
types: begin of t_mara,
         matnr type matnr,
         mtart type mtart,
         extwg type extwg,
         matkl type matkl,
         werks type werks_d,
         dispo type dispo,
         ekgrp type ekgrp,
       end of t_mara.
data: tb_mara type table of t_mara.
SELECT a~matnr a~mtart a~extwg a~matkl b~werks b~dispo b~ekgrp
       INTO TABLE tb_mara
       FROM mara AS a
       INNER JOIN marc AS b ON a~matnr = b~matnr
       WHERE a~matnr IN so_matnr
       AND   a~mtart IN so_mtart
       AND   a~extwg IN so_extwg
       AND   a~matkl IN so_matkl
       AND   b~werks IN so_werks
       AND   b~dispo IN so_dispo
       AND   b~ekgrp IN so_ekgrp.
Kind Regards
Eswar

Error in Transporting

Similar Messages

Maybe you are looking for