Error in URL (host name coming twice)

Hi All,
  I am facing a error while running any query in browser (Web Analyzer), in the URL that the system is generating the host name (sapdevqas) is coming twice due to which the page is not getting displayed, for now I have to delete it manually to make it work. Can anyone tell me how to rectify this & where i am going wrong.
Thanks,
Pritam.

Hi,
If you are using the query designer 7.0 check the URL in table RSPOR_T_PORTAL for the default portal. Is the URL maintained correctly there? If you are using QD 3.5 you need to check the URL according to note 805344.
Best regards,
Janine

Similar Messages

  • Network Error []: Cannot Get Host Name when running business rules

    Guru's
    We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
    Network error []: Cannot Get Host Name
    The following is then logged in the Essbase Application logs:
    Local/Application/Database/admin@Native Directory/Error(1042022)
    Network error []: Cannot Get Host Name.
    A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
    The environment is 11.1.2.0 and the architecture is as follows:
    Server 1 - MS Server 2008 x64:
    Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
    Server 2 - MS Server 2008 x64:
    Essbase Server
    Server 3 - MS Server 2008 x64:
    Framework Services, FR Print Services
    We have tried doing the following:
    1. Put in the server host names into the hosts file on the Hyperion Servers
    2.  Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
          - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
         - Added a new DWORD Value named MaxUserPort and set it to 65534.
         - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
    3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
    4. The Essbase Config file has the following settings:
    NETDELAY 2000
    NETRETRYCOUNT 2500
    Has anyone come across this issue and if you managed to resolve it, how did you go about it.
    Thanx

    Hi Rahul
    The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
    We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
    Thanks

  • Error:Set by Host Name:CRMDEV;Transaction:R3AS:SMOF_DOWNLOAD

    Hi Folks,
    I am trying to replicate BP  from CRM to R/3.All the Mappings from CRM to R/3 are already maintained.Also I have created the subscriptions and publications for R/3 in Admin Console.All the RFC Connections are working correctly. When I checked the SMQ1 in CRM I got the following error:
    Set by Host Name: CRMDEV;Transaction R3AS:Report:SMOF_DOWNLOAD.
    Can anyone guide me how to solve this issue?
    Thanks.
    Sudhan

    Hi All,
    Solved this issue myself.
    Basically no need to worry about this queue message.
    1) I done set the filter for EQUIPMENT in t-code R3AC1
    2) Customer Relationship Management --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> define default setting for Replication or equipment.
    Site name - ERP logical system name
    IBase Category - EQ
    Obj.Family - 0401
    Category ID - MAT_Z401 (Important note is this category is created under R3PRODSTYP hierarchy, under MAT_ category). Equipments in ERP also should create using this Category, then only the equipments will be downloaded)
    Delta down load checked
    3) Go to R3AS and select load object as EQUIPMENT and start
    4) you can see the IBASE in CRM using IB53 or using the webUI search.
    Thank you and Regards,
    Niranjan

  • Web Dynpro Application URL Host Name Not Correct

    Hello,
    I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system.  When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser.  WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
    Thanks,
    Jim N.

    Hello,
    To configure the FQDN (host name full), please take a look at these:
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
    Regards,

  • IP/IVR 4.5 CRS Client Editor Error message Engine host name list is empty

    When the reactive script is being clicked on the client
    version of CRS editor it is returning an error "Engine host name list is
    empty check the LDAP enabled CRS for engines" in the debugging pane ,But i
    dont face any issues when i'm doing the same on the server. KIndly help me
    out to fix this issue
    note : version of ipivr is 4.5 and i am facing this issue when i execute on the client machine and i have attached a screen shot along with this

    Thanks for the response.
    1 . I am able to ping the crs server from the client machine by host anme as well as it's ip address.
    2. yes i am able to ping the client from the server
    3. i get the same error message when using IP address to log into the CRS Editor.
    note :
    1. i face the same issue when i try it out on another client on the same network
    2. since i was facing this issue i tried to install the SR2 and check it out but still i am facing the same issue
    3. there is no firewall in the CRS server or in the client machine where the CRS editor is installed

  • RFC error code 91 : Host name  or service of thge message server unknown

    RFC Test connection is getting failed with following error
    ERROR                service 'sapms<sid>' unknown
    LOCATION             SAProuter 37.12 on prosaprt01
    DETAIL               NiPGetServByName: service 'sapms<sid>' not found
    CALL                 getservbyname
    COMPONENT            NI (network interface)
    COUNTER              5088
    MODULE               niuxi.c
    LINE                 524
    RETURN CODE          -91
    SUBRC                    0
    RELEASE              640

    Hi Cool,
                  Make sure on your server(if it's windows)
    C:\WINDOWS\system32\drivers\etc\services is having this bellow line
    sapms<SID>     36<nn>/tcp     # SAP System Messaging Service Port
    I guess you can realize that 36<nn> is the messaging server port, so you can in put your system no. in place of <nn>.
    If you are trying too connect to another system and make sure it's port is also added in the service file and it's open (accessible from this system).
    Regards,
    Hari.

  • Network error []: Cannot Get Host Name

    Is there a config or other Essbase setting I can use to eliminate this error?
    My calc script completes successfully after an hour, the numbers are always correct.
    This error show up randomly. You don't see it for a week, then three days straight. Then gone for a month....

    Hi Rahul
    The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
    We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
    Thanks

  • Error 5 Missing Host Name - Reimporting PCF Does Not Fix?

    I have a virtual machine running Cisco VPN 5.0.02.0090 and apparently corrupted my PCF file last night.
    I read up on it and it seems like the easiest fix is to just delete, then reimport another PCF; easy enough. I did this, but still have no hostname. In fact, I have no settings whatsoever when I click "Modify." Could all my versions of this PCF be corrupt, I wondered? I had my business partner send me a fresh definitely working copy. Still no luck.
    So I uninstalled and then reinstalled the Cisco VPN; surely that will fix it. Added the PCF again. Still no hostname or anything else.
    Just for kicks, I imported another PCF entirely for a company that I don't work for, just to see what happens. And it imports just fine and has all it's information.
    So...I had a PCF go bad. When I delete it and bring in a new instance, it too is bad.
    What is happening here? How on earth can I fix this?

    Are the clients and the server on the same private LAN?
    In that case you absolutely want to give your server a static IP address in your LAN environment. That's completely separate and distinct from the public DNS address that you're NATted through.
    Open Directory will have all kinds of problems if the IP address of the server changes. This would also hold true for remote clients (assuming you're setting up some kind of port forwarding in your router to let remote clients connect).
    So step back a little... give your server a static IP address in your LAN, then replay the setup instructions.

  • Java Web is taking twice the host name while creating URLs

    Hi Colleagues,
    I am facing a strange issue, refer the below URL,
    http://inst50067133.inst50067133.blr3.sap.corp:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0RSTT_I07_T010_DP4
    It takes twice the hostname while creating any URLs. SAPLOCAHOSTFULL is set correctly with the full host name, still it generates like this.
    Any one come across like this & any solution is found? Please post me.
    Thanks
    Isaac

    Hi Issac,
    Can you  explain it in detail, which area you have checked/editted  in portal side for resolving this issue.
    We are facing the same here, while executing any queries iin Busi. explorer, portal comes with the URL including twice the hostname .
    Please advice .
    Regards,
    Nibu Antony

  • Login problem with E-Recruiting URL, where check host name?

    Hi,
    I've set up a standard Recruiter user and assigned him the standard Recruiter security profile. When I run RCF_GENERATE_URLS, I get this URL:
    http://iwdfvm2160.wdf.sap.corp:51080/sap/bc/bsp/sap/hrrcf_start_int?sap-client=200&sap-language=EN&rcfSpId=0003
    But I get an "internal error" when I login with my User. Our server's host name is iwdfvm2160.gcsap.com, but the program isn't resolving this. This is probably the cause of the error, but how can I get it to pick up our host name?
    We are on E-Recruiting version 6, and it's running on the same box as HCM.
    Thanks, Vlad

    Hello Vlad,
    usually the links generated from the report are correct. Only very rare problem might be in the network structure of your company that the internal dns servers can't resolve the server name or the sap servers are in a not reachable network segmant as you never worked with http access to the servers for other applicatiohns.
    But if you log on the first time with your user and have not been working with the application yet, the more probable reason for this error is the missing candidate for e-recruiting. Without a candidate you won't be able to work with the application.
    Check transaction SLG1. There should be an error "No candidate for User <your username>" or sth. similar.
    If so run report RCF_CREATE_USER to get a candidate. Then you should be able to log on.
    If you already have a candidate and cannot login check SLG1 and SM21 for error messages. If there are any but you don't feel able to solve the logged problem. Just post the message here. I think someone will be able to help.
    Best Regards
    Roman Weise

  • Retrieve the host name behind the radware url

    Hi,
    Is it possible to retrieve the host name behind the radware url in BI Publisher template?
    Thanks, R.

    Hi,
    Did you maintained the entry in below format
    12.123.23.23        srstfdf        srstfdf.shouse.com
      in hosts file. If it is already maintained in the above format. then check the error if it is DNS related maintain the entry in DNS.
    thanks,
    madhu

  • SLD Error : No host name defined in Exchange profile sld.SID.host

    Hi,
    I am trying to do the configuration for the pre built examples (Airlines, Agency ) using XI after installation.
    But when I installed XI and did the post install configuration, I had mentioned 000 as Integration server and configured the same using the SLD (URL) in business system configuration.
    But when I was doing the configuration for the example, I wanted to configure the client 100 as integration server on SLD (under business systems) , so I deleted the old business system pointing to client 000 (as it is defined as integration server) and now I am trying to add a new business system (client 100) on SLD and it is giving me an error saying that the integration server already defined.
    On the SLD error log it also shows tat No Host name defined in Exchange profile for sld.SID.host...
    Are the above two errors related and how do I add the client 100 as a business system on SLD and have it as my Integration server.....
    Please help..
    Thanks,
    Madhu

    Moorthy,
    Thanks for the reply...but all the checks were successful when I did the configuration in 000 and before I deleted the business system for client 000 in SLD...(See my post and problem above..)....I messed with my SLD and removed the business system for client 000 (which is configured as the integration server) and now when I try to add a new business system for client 100 (as integration server>..) I am not able to do as it gives me a error saying integration server already exists even though I deleted it from SLD Business system..
    Thanks,
    Madhu

  • Name in certificate `URL' does not match host name `URL'

    Hello,
    We are getting the error
    Name in certificate `URL' does not match host name  `URL'?
    Can someone can provide solution to resolve the above error? Also can you please inform whether Coldfusion 8 supports checking the Subject Alternative Names in the SSL  certificate? If so, kindly tell us how to do it.
    Environment that we use is coldfusion 8 with sql server 2005 (DB). If you have any query please let me know.
    Thanks,
    Satheesh.

    Hi Siva,
    we have faced the same problem on our application. To overcome this we used the below workarround...
    Make the host entry for webservice provider [serviceprovider.test.com] pointing to its IP [172.99.71.12].
    In cfm file
    There's no need to add the proxy and the port in the cfm file.
                 <cfhttp method="Post" url="#WEBSERVICE_SERVICE_PROVIDER#" resolveurl="Yes">
                    <cfhttpparam type="Formfield" name="xmlValue" value="#tostring(xml)#">
                </cfhttp>
    The below URL will help you on debugging CFHTTP Request
    http://kb2.adobe.com/cps/998/9987e902.html

  • When attempting to print with HP P2015 cabled to AirPort Extreme, error message is "Network host (name) is busy".  What's happening?

    When attempting to print with an HP P2015 cabled to an AirPort Extreme, the network won't connect to printer.  The Print Que message is "Network host (name) is busy; will retry in (number) seconds."  When I delete the file to be printed, the Print Queue screen says "Printer Ready".
    More Information:
    The printer's Queue Name is Hewlett-Packard HP LaserJet P2015 Series
    The Location is "(my name) AirPort Extreme"
    URL is "Hewlett_Packard%20%HP%20LaserJet%20P2015%20Series._pdl-datastream._tcp.local./ ?bidi" (for whatever that means)
    Driver Version is 18.4
    Printer Software is HP LaserJet P2015 Series
    The printer is listed as a printer on System Preferences/Print&Fax screen
    If I connect the printer cable directly to the iMac, the printer works fine.
    Any helpful directions would be greatly appreciated.

    I came across an Apple article last modified 6/2/08 (Printer troubleshooting for AirPort Base Stations and Time Capsule).  It suggested the old standby, i.e., disconnect the AirPort Extreme Base Station from its power source, turn off the printer, turn on the printer, and reconnect the AirPort to its power source.  It worked.  I guess disconnecting the AirPort cleared out the network host.  Yea. 

  • How to set dynamic host name in the URL of a URL iView?

    Hello,
    I am using a standard URL iView that points to some J2EE app I've written and deployed on the same server.
    I would like to set the host name to be a dynamic one, this way I won't need to change the iView URL when transporting it from one portal to another. As far as I know the system for a URL iView only controls authorizations but cannot replace the full URL set in the iView.
    Any idea who can this be achieved?
    Roy

    Hi Mrityunjay,
    forced URL at runtime will require me to call the URL iView from another iView that I will need to code (setting the URL in the Request object). If I did all this I might as well call it from this iView already.
    I would like to do it with no further developments. I would have thought that SAP has constants that can be plugged in the URL for this type of thing, i.e. $hostname...
    Rgds,
    Roy
    Edited by: Roy Cohen on Aug 21, 2008 4:03 PM

Maybe you are looking for