Error in using the tds2xx Example2.vi

When I run it, it comes an error "Property Node in TKTDS2XX Write.vi->TKTDS2XX Set-Query SESER.vi->TKTDS2XX Set Conditions for SRQ.vi->TKTDS2XX Example2.vi" which I don't understand, since I am just a beginner. Anyone can tell me what the error is and how to fix it.
I cannot post the example2.vi to this web, if anyone want the example2.vi, sending me email [email protected]
Thank you very much

In this case, the important part of the error is not the text, but the error code number. What is that value? It will give a better idea of what the problem is...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Program error when using the Eyedropper tool on Win8/Photoshop CC (14.2.1)

After a year of using Photoshop CC (with many errors I still have to cope with) there is a new one. Whenever I use the color picker I get an error message, that the quest can not be done for a program error. I click close and I can use the new color but I can not see it in the tool bar preview. This really disturbs my flow while working a great deal (always clicking the error message away, never having a color preview). I am annoyed paying 25 € per month for so many error, just because Photoshop is considered a standard in the industry.

First Part System Info:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 3798 MB
Free memory: 1788 MB
Memory available to Photoshop: 3114 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=1962
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Intel(R) HD Graphics 4000"
gpu[0].RendererID=4416
gpu[0].Vendor="Intel"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="10.18.10.3316"
gpu[0].Driver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10 iumd32"
gpu[0].DriverDate="20131001000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 "
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 10.18.10.3316"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[96]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message <i>"System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"</i>
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

Getting error while using the data element in ztable

though i specified the length as 20 in dataelement when i am entering the dataelement i am getting this error
while i used help i got the following information
Number of positions < minimum number (1) for data type CHAR
Message no. DO253
Diagnosis
A minimum length is required for the specified data type.
This minimum length is not reached by the specified number of positions.
Procedure
Increase the number of positions or select a more appropriate data type with the possible entries help F4.

This is strange, you shouldn't even be able to activate the dataelement type char with a length of 0. Revisit your data element and make sure that the length shows to be greater than 0 and reactivate your data element to make sure the newest version is active. In case you are referencing a domain in your data element do the same with the domain after validating that everything is correct (you can also use the check function). Then go back to your table and reenter the data element before activating your table.
Hope that helps,
Michael

Error when using the variable System::ErrorDescription

HI All,
When I try to use the variable System::ErrorDescription I get the following error:
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
Do I need to declare it or it's a variable that always is available to get exceptions from the execution states?

if this is in a Script Task then:
- add the variable in the Script task property ReadOnlyVariables list
- in the Script Code refer to it as
string ErrorDesc = (string) Dts.Variables["System::ErrorDescription"].Value;
Jan D'Hondt - SQL server BI development

Error in using the Socket Adapter while deploying the composite

I am going through a Socket Adapter sample given in Oracle JCA Adapters for Sockets"Oracle Socket Adapter Hello World".
This sample demonstrates inbound request/response and synchronous outbound request/response modes of communication using using Oracle Socket Adapter.
The HelloWorld business process takes an input string from the Socket Adapter inbound service and
publishes the message to the BPEL process.
The BPEL process invokes the Socket Adapter outbound service and returns the received string using synchronous reply.
Before going into this sample i did the configuration in the Weblogic server by following the steps below:-
1)Log into Weblogic server console
2)Click Deployments in the left pane for Domain Structure
3)Click Socket Adapter.The settings for SocketAdapter page is displayed.
4)Click the configuration tab
5)Click the Outbound Connection Pools tab, and expand java.resource.cci.ConnectionFactory to see connection
factories
6)Click eis/socket/SocketAdapter
7)Set the KeepAlive connection property to true
8)Save the setting.
After this i did the necessary configurations in the Socket Adapter Configuration Wizard(Inbound/Outbound).
The BPEL process has:-
1)A receive which receives input from a Socket Adapter which serves as an inbound synchronous service.
2)An invoke acitvity which invokes a socket adapter which serves as a outbound synchronous service.
3)Two Assign activites to do the necessary assignment.
After Deploying the sample i encountered with the following errors:-
<Sep 9, 2012 1:19:48 PM IST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on soa_
server1: [JCABinding] [Middleware.ServerConnection/6.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.socket.SocketInteractionSpec: Cannot locate Jav
a class oracle.tip.adapter.socket.SocketInteractionSpec..>
Can any one please tell me the solution for this error.
Edited by: 957910 on Sep 12, 2012 1:10 AM

Did you find a solution for this issue. I see the same error while deploying the same very sample code.

Error in Using the RPC WSDL based Business service

Hi,
I am using OSB 11g. I have created a business service with one of the WSDL which supports rpc/literal style. I am trying to call this business service using the service callout.
For the service callout if i use Configure SOAP Body option, i am getting the following error and unable to deploy to the server.
*'The Configuration does not correspond to a SOAP RPC WSDL.The WSDL of the target service may have changed.'*
But i am able to use the same option in sbconsole with out any problem. Is it an real issue with Eclipse IDE or a bug in the IDE? Please let me know if any insights into this issue.
Thanks
Siva

Siva,
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/monitoring_ops.htm#i1108369
Enable message trace for BS and see what the actual payload that is being sent. It would give you clear indication what might be the problem.
Thanks
Manoj

Error in using the JMS Adater using weblogic queue

I am using weblogic queue in jms adapter to queue the data. i configured the server.xml
     <shared-library name="oracle.weblogic" version="10.1.3">
          <code-source path="D:\product\10.1.3.1\OracleAS_5\jdk\lib\weblogic.jar"/>
     </shared-library>
I got the following error. Any Suggestions?
file:/D:/product/10.1.3.1/OracleAS_5/bpel/domains/default/tmp/.bpel_OSM_OrderRequest_2.0_c68a29fd8af11327e1a8892e8de5a6bb.tmp/Sample.wsdl [ Produce_Message_ptt::Produce_Message(orderRequestMessage) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
</summary>
</part>
-<part name="detail">
<detail>
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.

I am able to fix this error by copying "JmsAdapter.jar" to "applib" directory of oc4j_soa.
I was getting a new error.
+"Missing class: oracle.tip.adapter.api.TranslationAware+
+     Dependent class: oracle.tip.adapter.jms.JmsInteractionSpec+
+     Loader: global.libraries:1.0+
+     Code-Source: /D:/SOA1013/j2ee/oc4j_soa/applib/JmsAdapter.jar+
+     Configuration: <code-source> in /D:/SOA1013/j2ee/oc4j_soa/config/server.xml+
+The missing class is available from the following locations:+
+     1. Code-Source: /D:/SOA1013/bpel/lib/orabpel.jar (from <code-source> in /D:/SOA1013/j2ee/oc4j_soa/config/server.xml)+
+     This code-source is available in loader oracle.bpel.common:10.1.3."+
But managed it to fix it by copying "orabpel.jar" to "applib" directory.
We need to restart OC4J once we copy the JAR files.
regards,
S.Vasanth Kumar.

Error in using the FM 'L_TO_CREATE_MULTIPLE'

Hi Gurus,
I have a custom report, let's call it YREV, in ABAP that uses the FM 'L_TO_CREATE_MULTIPLE' and gives an error as follows:
"(STOP) Material is not the same for confirmation and delivery"
Note: (STOP) is an icon.
The scenario is that YREV is called from a custom dialog program, which we will call SAPMYCUS, when the Reverse radiobutton is chosen and Enter button is pressed.
This is used to reverse the posted GI of a given Outbound Delivery.
The problem is that the error mentioned above is shown on screen and yet when I check, the reversal to the GI is done.
Why is this so?
The client who needs this program is complaining that the reversal is done but only partially.
How do I check this "partial cancellation"?
Is there any other FM that can replace this?
According to [this|http://help.sap.com/saphelp_40b/helpdata/en/c6/f83a434afa11d182b90000e829fbfe/content.htm], these FMs were created so that it is easier compared to using batch input to process transfer orders.
I'm starting to think otherwise.
Hoping for your help regarding this matter.
Thanks.
~ ric

Hello Aditya,
Thanks for showing interest in my question.
To answer your question of what I am trying to do, I hope this can shed some light.
I was given a PO number and an Outbound delivery number to work with.
We have created a custom (module) program that handles transactions regarding outbound deliveries, and one feature of this program is to do a reversal of Outbound deliveries already posted.
When using this reversal feature using the given PO as reference, the error message which I mentioned in my previous post, is displayed on screen.
The user is curious why this happens and yet the posted outbound delivery involved is reversed.
Additional info:
VL02n > Post Goods Issues - to process(?) given Outbound delivery
Custom program - to do the reversal process
VL02n does Mvt 641 while the reversal does Mvt 642.
I apologize as to not being so clear but I am not so well versed with MM and its workings.
Thanks.
~ ric

Error in using the tds2xx Example2.vi

Similar Messages

Maybe you are looking for