Error in Variant Configuration CO684

Hello, friends !
Back in the forum, now with a problem in Variant Configuration.
I was able to carry out the whole process up to the creation of the production order. There I have the error message CO 684 "You cannot make an assignment to make to order stock" .
All the configuration stuff seems to be OK.
I created a sales order configuring the product.
The MRP creates a planned order in the Customer Segment of the MD04.
The components have the special stock E.
I have tried with stock available in warehouse and also tranferring to E using MB1B movement type 412 E.
But the error still remains !!
Any tip or clue ??
Thanks in advance.
Dario

Rajesha,
for the KMAT we have:
strategy group: 25
Individual: 1
In the sales Order:
Item Category: TAC
Requirement Type: KEK (in the procurement Tab); class should be 046.
However, in the controlling for sales order there is no entry for:
TAC " " 046 , only for Class 041, in the Assignment of Requirements Type to transaction.
In the planned order: Account Assigmnment: M (it takes from strategy 25)
Settlement Profile (In the order Type) SD1.
Result Analysis Key: ?? (where can I find it??)
Regards

Similar Messages

Syntax error in variant configuration

invariant configuration when we do ct04 and after 10 in a bar we write the $s and fill in the charachteristic i am getting a syntax error.please help .why syntax error at this stage

Hello,
There are different kind of dependencies... check this syntax format for pricing characteristic..
$SELF.ZPRICE = 'RED 100' IF COLOUR = RED
AND CC = 100.
In this dependency ZPRICE is the characteristic for pricing, RED and CC are the characteristics for the variant.
Prase

Error message while creating configurable material for variant configuration.

Dear All,
I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
Regards
Akula Sivaji Kumar Madhu Kiran

If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
In MMNR, Click on the Edit Group.
Then select the material type and click select element.
Then mark a tick option in another group and then press Element/Group.
Then you can see the material type will come under this group.
Now save your entry, and create a material with this material type.

Regd : Error during saving the sales order for Variant configuration

Hi -
When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
Any solutions regarding the error.

Hi,
This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
So you can maintain the above settings compulsory.
please let me know any clarification.
Regards,
Mohan

Variant configuration-- syntax error in creation of object dependencies

In variant configuration when i try to create object dependency (tcode=cu01), after entering the dependency and also description when i enter the syntax in the source code it is giving error: error in syntax check for simple condition
I have entered syntax as : engine_cap in ('1000','1400','2000'), pls guide me with the solution to create object dependency

Dear, Shakeer
Please follow along with my very own config guide of variant config.
1)     Create a configurable Material Using KMAT u2013Material Type. Item Category 0002 and Item Category Group 0002. Go to classification tab-here you maintain the class type 300 and assign the class, we will create this shortly. (So after creating class come back into MM02 and input the class that you create in step 2.)
2)     Create a class in T-Code CL01. Use class type 300 for Variants. In this we assign the characteristics we will create shortly.
3)     Create characteristics in T-Code CT04. Create your characteristic like for example, Z_Type, Z_Model, and Z_Color.
4)     We must create a characteristic for the pricing. Example, Z_CarPrice inside this characteristic we must maintain. Table Name SDCOM, Field Name VKOND in the additional data tab. Also, go to restrictions tab and enter the class type 300 Variants. Now in order to make this pricing work for you, you must maintain (enter) all the values from the characteristics. For example, Red, Blue, Black, Honda, Toyota, GLI, XLI, and 2.0D.
5)     Now going back to the characteristics in CT04 change mode. Make sure Basic Data has *Multiple Selections circled. * Character Format has 26 and a check in case sensitive. Make sure in restrictions tab class type 300 Variants is present. Go back to Values and highlight the first one. Example, Red then go to Extras->Object Dependencies->Assignments You must maintain this code $self.Z_CarPrice=u2019Redu2019 in basic data make sure itu2019s released & procedure is filled in. Go back to dependency editor and paste the same code there after 000010 $self.Z_CarPrice=u2019Redu2019 and do this for each and every value. Very Important * Maintain configuration profile in T-Code CU41 for the material -> Priority 01, Variant Configuration, Class 300, status, Released 1, then click save. Note: If 2 conditions are inactive use class group A instead of B in SPRO for Condition type VA00.
6)     Go to T-Code VK11 and enter VA00 condition type. Enter all the values maintained in the characteristics for example, Red, Blue, Black, Toyota, Etc and enter the price then click on save. Now it should work fine in VA01. Make sure you have assigned the VA00 condition type in the pricing procedure.
Good Luck,
Muhammad Ali Lozada

Variant Configuration Error in sales order

Hi,
Done the customization for variant. Raised sales order & selected the characteristics like colour--Red & engine--200cc for material & checked in item level condition its showing the 2 characteristic 100cc & 200cc engines but not the characteristics colours. Maintained condition record & condition type in pricing procedure.
I have 2 issues
1) In Sales Order I selected only characteristic engine 200cc & why it is showing another characteristic 150cc also in Item level conditions.
2) Why it is not showing the Colour characteristic Red in conditions.
Looking for the experts answer
Regards
Pradeep

Hi,
Variant configuration is as per my knowledge its a case sensitive. Please maintain all the variants and character in CAPP letter and do the same during formula writing also.
During creation of Condition record maintain with CAPPs letter only.
Thanks,
Neo.
*Reword points if its helps.

Creating a planned order with error "Material requires configuration"

Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
Phong

See also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano

Variant configuration

I have done all the settings for variant configuration. But still I am getting a error while raising sales order (VA01) (ERROR -configuration not possible for material)
now what should i do.

Dear pavan kumar,
Check Delivering plant is maintained or not in sales order.
Regards,
Srikanthraj

Creation of sales order with Variant configuration info

Hi friends,
   I am creating sales order along with Variant configuration data. We have 3 level BOM structure.
I am using BAPI_SALESORDER_CREATEFROMDAT2 and filling in ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_PART_OF ORDER_CFGS_VALUE, ORDER_CFGS_REFINST
tables exactly the same way BAPISDORDER_GETDETAILEDLIST FM returns.
Sales order is being created with no variant configuration information.(Not in the header level atleast)
Can any one help me on this.
Thanks
Seshagiri

Updating Variant Configuration data for SO item became little tricky for us in an ongoing implementation. After spending some hours investigating the correct combination of data to pass, we were able to post the document correctly. As no detailed documentation is available online for this scenario, I hope this post will help community for similar requirements. J
For updating Variant configuration (VC) data for Sales order item, we need to populate below tables of standard FM or BAPI (e.g. SD_SALESDOCUMENT_CREATE).
Normally the standard FM or BAPI does not return any error messages in case configuration data is not updated successfully.
·         SALES_SCHEDULES_IN: The required date field should be populated with appropriate value (REQ_DATE).
·         SALES_ITEMS_IN: Field PO_ITM_NO should be populated with appropriate value.
·         SALES_CFGS_REF Table:
1.       This table should have 1 record per item.
2.       Combination of CONFIG_ID and ROOT_ID should be unique across line items.
POSEX
000010
CONFIG_ID
000001
ROOT_ID
00000001
SCE
1
COMPLETE
T
CONSISTENT
T
CBASE_ID_TYPE
G
·         SALES_CFGS_INST:
1.       This table should have 1 record per item.
2.       Combination of CONFIG_ID and INST_ID should be unique across line items.
CONFIG_ID
000001
INST_ID
00000001
OBJ_TYPE
MARA
CLASS_TYPE
300
OBJ_KEY
MATNR value
QUANTITY
Quantity value
QUANTITY_UNIT
Quantity Unit
COMPLETE
T
CONSISTENT
T
OBJECT_GUID
MATNR value
PERSIST_ID_TYPE
G
·         SALES_CFGS_VALUE:
1.       Combination of CONFIG_ID and INST_ID should be unique across line items.
2.       We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
3.       The characteristic value should be in SAP internal format.
CONFIG_ID
000001
INST_ID
00000001
CHARC
Material characteristics
VALUE
Material characteristics value
·         SALES_CFGS_VK:
1.       Combination of CONFIG_ID and INST_ID should be unique across line items.
2.       We can have multiple characteristics for a material. In that case appropriate records should be inserted in this table. Note that CONFIG_ID and INST_ID should be same for all the rows you insert in this table for multiple characteristics for a material.
CONFIG_ID
000001
INST_ID
00000001
VKEY
Material characteristics

Production Order - Variant Configuration of Components

Hi experts,
I want to book a part (which is on stock with serial number and variant configuration) into a production order with movement type 261-E.
However, there I get the error message that the configuration does not match.
If I compare the configurations, one is empty - I guess the one from CO02.
How can I add the configuration to CO02-components?
Kind regards

btw, it is a production order without a material number itself (a kind of repair order, on which we book the parts of repair).
And one of that part is a component which is serialized and having a variant configuration.
And I have to add the info, that I don't have the part in the BOM/routings. I have to add different components per production order.
Kind regards

Error in JDI Configuration

Hi All,
i am getting an error in JDI configuration in the step importing MSS.sca file in CMS transport studio/development.
error description as follows
Fatal:the compartment sap.com_SAP_MSS_1 contains dirty DCs after the CBS build process:
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ecm dcvendor=sap.com)
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec dcvendor=sap.com)
Info:the compartment sap.com_SAP_MSS_1 contains broken DCs after the CBS build process:
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/budget dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/equ dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ewa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/finutils dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/lpa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mas dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mol dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mov dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pcr dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/per dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pla dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtp dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/cand dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/req dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rpt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/tmv dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=temp/testforisrlpd dcvendor=sap.com)
Fatal:communication error: CBS error: dirty DCs in buildspace after the CBS build process
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2007-02-26 04:52:23.0586 +1:00
please help me.
thanks in advance.
Srinivas.

Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna

What is Variant Configuration!!!

Hi Guyz,
Can anyone please help me with Variant configuration,I got some info from this forum but that is not explaining anything in detail,what,wher,why?when i create a material with KMAT(configurable material),in basic data 2 screen it is asking for Cross plant CM, i don't have a clue what i need to enter in that field,So plz if you can send some info on variant config. that would great.Really appreciate your help,
u can mail me on [email protected]

Hello Mujtaba,
Refer to the following links for a good understanding of variant configuration.
<a href="https://forums.sdn.sap.com/click.jspa?searchID=944477&messageID=2978315">Process</a>
<a href="https://forums.sdn.sap.com/click.jspa?searchID=944477&messageID=2972200">Variant Pricing</a>
<a href="https://forums.sdn.sap.com/click.jspa?searchID=944477&messageID=2918196">General error</a>
Regards,
Gauravjit.
Reward points if the links are helpful

Error in varient configuration

im getting error in varient configuration.
my main item is cd1
varient color is red, blue, black
im maintaing pr00 for cd1, and va00 for red,blue,black.
whille im creating the sales order ,im getting main material price im not getting varient price
plz give me teh suggestions

Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna

Variant configuration questions

HI Gurus,
Pls help me answer following two questions
1.Is there a way i can transfer the variant configuration master data(Characteristics, class,dependencies etc) to other(quality, production) system automatically?
2.In case of inconsistency in the VC configuration system says "Configuration is inconsistent" it doesn't give any specific message where the inconsistency happened.Pls let me know is there a way i can give specific message when inconsistency happenes.
Example: when user selects car model 1105, colour red should not be allowed.In this case i want to send a message "For model 1105, colour red not allowed" not just "configuration inconsistent"
Thanks,
KRishna

1) Data that is used in Varaint Config (Classes, Characteristics, Object Dependencies, etc .................) can be sent to other Clients by ALE).
2) When you see that you have an inconsitency, double click on the Red Error, this will bring up a Window with the Characteristic and Value that is inconsistent. Next click on the Object Dependency Button, under the window title bar. This wil show you the Object Dependency that is raising the inconsistency. Variant also has a Trace Tool that you can use to watch Object dependencies, to see the Value before the Object dependency set the Value, and than the Value after the Object dependency.

Variant Configuration - Conf. Supporting Points - Planning Profiles

Iu2019m currently working on an implementation where we are implementing R/3 (SD, Manufacturing, LO, FI, etc) and APO Demand Planning. In doing so weu2019re using VC (Variant Configured) Products where weu2019re forecasting at the KMAT Level which should drive the dependent requirements for non-VC items and those VC items that we maintain a Planning Profile (MDP6) and then Conf. Supporting Points for the items. This is fine for the products that we actually want to maintain a split factor for but most of the VC items we have from a planning perspective we donu2019t actually want/need to maintain a probability usage for the VC items. In trying to maintain the Planned Independent Requirements we receive error messages stating we need to maintain the profile and also manage supporting points.
I was able to release a forecast from DP and place it in Demand Management R/3 but if you want to change it in R/3 youu2019re forced to maintain the profile and supporting points. Also, even using the released forecast from DP when I run MRP I get en error message 52 u201CNo BOM Selectedu201D and then opening the order that is generated I get message 61259 Material requires configuration and the message (below) indicates that characteristic values need to be maintained.
What Iu2019m looking for is a way to allow MRP to plan these items without having to maintain a profile for thousands of materials. Also, so it would enable the ability to maintain the forecast for those items in MD62.
ERROR MESSAGE IS BELOW:
Material requires configuration
Message no. 61259
Diagnosis
Orders and requirements for a configurable material must have characteristic values.
Usually, you should create a variation for configurable materials managed in inventory management which has the default variant configuration.
System Response
MRP: Requirements without characteristic values for a material cannot be planned in MRP.
Procedure
Check requirements or orders.
Create a configuration evaluation for the material in the material master record if necessary.

Hi,
Please check below link.
http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm
Regards,
Anil

Error in Variant Configuration CO684

Similar Messages

Maybe you are looking for