Error in webdynpro view creation
Hi, i am getting the following errors while creating views in webdynpro. Can any one tell me the solution?
Service cannot be reached
What has happened?
URL http://emsap008:8000/sap/bc/wdvd call was terminated because the corresponding service is not available.
Note
The termination occurred in system ENW with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:emsap008_ENW_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Hi!
There are further ICF nodes and services to be activated to use the view editor.
If this is a test/development system simply activate all nodes and services under node sap.
1. enter transaction code SICF and select services
2. right click top node and choose deactivate service -> all services and nodes will be deactivated
3. again right click the same node and choose activate service
4. IMPORTANT: in the upcoming popup choose "yes, all" (the button in the middle) and not just yes (the left button)
5. problems in view editor should be history for you
hope this helps.
regards,
volker
Similar Messages
-
Error opening Webdynpro view of NWDS 7.3
I just installed NWDS 7.3 patch 1. Installed JDK 1.6.0_07. NWDS is having problem showing Webdynpro view. When i open the webdynpro view and drag a UI control all i get is the below screen.
In the error log i get the below error message. I was able to compile and deploy the DC, but having problem see the webdynpro view in the Studio. Please help on what need to be done. I tried this on Windows XP and Windows 7 , and ran into the exact same issue.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError: com/sap/security/core/server/csi/XSSEncoder)
at org.eclipse.swt.SWT.error(SWT.java:3884)
at org.eclipse.swt.SWT.error(SWT.java:3799)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:137)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3885)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3506)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: java.lang.NoClassDefFoundError: com/sap/security/core/server/csi/XSSEncoder
at com.sap.tc.ls.renderer.base.AbstractRenderer.writeXmlEscaped(AbstractRenderer.java:1168)
at com.sap.tc.ls.renderer.base.AbstractRenderer.writeXmlEscaped(AbstractRenderer.java:1118)
at com.sap.tc.ls.renderer.base.AbstractRenderer.writeXmlEscaped(AbstractRenderer.java:1098)
at com.sap.tc.ls.renderer.ie6.LSPageHeaderRenderer.renderPageHeaderFragment(LSPageHeaderRenderer.java:843)
at com.sap.tc.ls.renderer.ie6.LSPageHeaderRenderer.render(LSPageHeaderRenderer.java:290)
at com.sap.tc.ls.renderer.base.BaseRenderManager.render(BaseRenderManager.java:944)
at com.sap.tc.webdynpro.clientimpl.designtime.LightspeedDesigntimeClient$RenderManager.render(LightspeedDesigntimeClient.java:48)
at com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer.renderFlowLayoutItemFragment(LSFlowLayoutRenderer.java:878)
at com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer.renderFlowLayoutFragment(LSFlowLayoutRenderer.java:812)
at com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer.render(LSFlowLayoutRenderer.java:252)
at com.sap.tc.ls.renderer.base.BaseRenderManager.render(BaseRenderManager.java:944)
at com.sap.tc.webdynpro.clientimpl.designtime.LightspeedDesigntimeClient$RenderManager.render(LightspeedDesigntimeClient.java:48)
at com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer.renderScrollArea_RenderContent(LSScrollContainerRenderer.java:1574)
at com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer.renderScrollAreaInnerFragment(LSScrollContainerRenderer.java:1456)
at com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer.renderScrollContainerFragment(LSScrollContainerRenderer.java:984)
at com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer.render(LSScrollContainerRenderer.java:358)
at com.sap.tc.ls.renderer.base.BaseRenderManager.render(BaseRenderManager.java:944)
at com.sap.tc.webdynpro.clientimpl.designtime.LightspeedDesigntimeClient$RenderManager.render(LightspeedDesigntimeClient.java:48)
at com.sap.tc.webdynpro.clientimpl.designtime.LightspeedDesigntimeClient$1.run(LightspeedDesigntimeClient.java:158)
at com.sap.ide.mmservices.core.general.MetamodelService.runWithCache(MetamodelService.java:53)
at com.sap.tc.webdynpro.clientimpl.designtime.LightspeedDesigntimeClient.render(LightspeedDesigntimeClient.java:149)
at com.sap.ide.webdynpro.viewdesigner.ur.RenderingService.renderDelta(RenderingService.java:462)
at com.sap.ide.webdynpro.viewdesigner.ViewDesignerPart.renderDelta(ViewDesignerPart.java:2018)
at com.sap.ide.webdynpro.viewdesigner.ViewDesignerPart.access$900(ViewDesignerPart.java:197)
at com.sap.ide.webdynpro.viewdesigner.ViewDesignerPart$ViewChangedListener$1.run(ViewDesignerPart.java:2695)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
... 22 moreHi ,
I think your Jdk is not compatible with the NWDS version so please change it to 32 bit JDK and try.
I think this will sure work .
Thanks & Regards,
Meghal Shah -
I am getting an error in creating a mat view.
SQL> CREATE MATERIALIZED VIEW
2 MV1
3 as
4 select integration_id
5 from sbolap.w_org_d;
from zeus.w_org_d
ERROR at line 5:
ORA-00942: table or view does not exist
Here the zeus is the schema i am accessing. At present i am operating in Aegis schema. I have privileges to create Mat Views in my schema and Select privileges in zeus schema.
Am i missing some thing? Kindly Help.I soved it. Actually we didnt have select privileges on proper and required objects.
-
Hi,
I have to create tree view. I followed the stpes mentioned at the following link.
Tree View
I have created a Z-structure and created a table view in the component BT111H_OPPT component.
While trying to modify the .htm page for the tree view, with the code mentioned at above link, I am getting following error.
"node_tab is unknown. Not declared by a data statement."
(see the line number 4 - nodeTable = "<%= mytreenode->node_tab %>")
I am using the following code.
<chtmlb:tableExtension tableId = "Table"
layout = "FIXED" >
<chtmlb:configTree id = "configTree"
nodeTable = "<%= mytreenode->node_tab %>"
nodeTextColumn = "NODE_TYPE"
onCollapseNode = "nodeCollapse"
onExpandNode = "nodeExpand"
onRowSelection = "select"
onNodeClick = "nodeClick"
ajaxDeltaHandling = "FALSE"
headerText = "Demo Tree"
allRowsEditable = "TRUE"
selectionMode = "SINGLESELECT"
table = "//mytreenode/Table"
tableLayout = "AUTO"
visibleRowCount = "12"
usage = "EDITLIST"
fillUpEmptyRows = "FALSE"
personalizable = "TRUE"
scrollable = "TRUE"
noFrame = "X"
downloadToExcel = "FALSE"
onClose = "closeTree"
onIncreaseSize = "increaseTree"
nodeTextColumnDescription = "NODE" />
</chtmlb:tableExtension>
Please let me know where and how should I decalre it.
Regards,
AnsalThanks Arun.. for the quick response...
After view creation, I was directly following your second section of the thread....
My issue is resolved....
Hope to get further help for this object development.
My requirement is add a new assignment block in opportunity screen which will show all the quotation,with their details, created for this opportunity and on click of each quotation id, all the items mapped to that particular quotation should be visible in same view.
Thanks & regards,
Ansal -
Hi SDN,
Im trying to create Generic Data source of View Method. I wanted to create View on BSID ( Closed Customer Invoices) and BSAD ( Open Customer invoices) Tables, But while creating its giving error as "THERE IS NO RELATION BETWEEN THE TABLES" I want to know how to create Relation Between the tables. Both BSID & BSAD are standard tables, so we cant make any changes.
Please let me know the procedure to bulid Rlation between the tables.
Regards
SujanHi Siva,
You have to give relation between these two tables in tab "Table/Join Conditions".
Creating Views:
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
View creation fr generic extraction
Hope it Helps -
View creation very slow - not materialized view
I have a view creation script which is running in a fraction of a second in the dev environment but takes over an hour to run in the test environment.
The test environment is off-site, so I have no direct access to it. It does have a lot more data in than dev, but this is not a materialised view so as far as I understood it the amount of data in the system shouldn't affect the time to create the view.
I haven't been able to find any information on what can make this happen. In the development environment I can be querying the view (or can lock it directly), and am still able to run the CREATE OR REPLACE statement without any performance impact. The view does contain function calls and is created with the FORCE keyword, but I can't find any evidence that this should affect the speed of creation.
I am running Oracle 10g (10.2.0.4.0) on Solaris in both dev and test environments.
Any ideas on what could be causing this are very welcome.
CREATE OR REPLACE FORCE VIEW DB_OWNER.PER$AGE
SYSTEM,
LOCATION,
EVENT_START,
SURNAME,
DOB_STRING,
DESCRIPTION,
GENDER,
OLD_ID,
URN,
COMBINED_SCORE,
LOAD_DATETIME,
AGE,
EVENTDATE_FROM,
EVENTDATE_TO,
DETAILS,
AOB
AS
SELECT /*+ leading(ad) */
p.system,
p.location,
p.event_start,
p.surname,
CAST (
NVL (
NVL2 (
p.dob,
TO_CHAR (p.dob, 'dd/mm/yyyy'),
TO_CHAR (
p.apparent_age
+ ROUND ( (SYSDATE - p.created_datetime_from) / 365, 0))),
0) AS VARCHAR2 (10))
AS dob_string,
p.description,
p.gender,
p.old_id,
p.urn,
NVL2 (
p.dob,
db_owner.app_age_score (p.dob, ssearch.get_target_age),
db_owner.age_score (p.apparent_age,
p.created_datetime_from,
ssearch.get_target_age))
AS combined_score,
p.load_datetime,
psd.age,
psd.eventdate_from,
psd.eventdate_to,
e.details,
NVL (e.aob, 'N/A') aob
FROM db_owner.person p,
db_owner.psd psd,
db_owner.entity e
WHERE p.db_key = psd.db_key
AND psd.age IS NOT NULL
AND e.system(+) = p.system
AND p.system IN (SELECT internal_name
FROM ops$tomcat.feed_details
WHERE inSearchList = 'true')
AND e.urn(+) = p.urn;Hi,
Thanks for the response.
Trying the same thing without the FORCE keyword made no difference, the view still takes a long time to compile and there are no compilation errors.
On the development system, I have run a long-running query on the view and checked V$Access. This returns a record for the view, but I can still successfully run the CREATE OR REPLACE statement on the view in another session. This appears to show that a record in V$Access doesn't mean that the view can't be recompiled.
On the test system there are no other sessions connected and no records for the view in V$Access.
Does anyone have any other ideas? -
Automatic storage location view creation in maintenace order (IW31)
Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PMHi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards -
Application view creation in WLI SERVER
Hi folks,
w,r.to my previous mail,Iam getting the following errors while i try to login
to the Application view console in WLI
Server.pl. anyone try to help me to sort this problem.Iam new to WLI Server.
<Cannot startup connection pool "wliPool" java.sql.SQLException: No suitable driver>
<Jun 13, 2003 5:02:45 PM IST> <Error> <JDBC> <001059> <Error during Data Source
creation: weblogic.common.ResourceException: DataSource(WLAI_DataSource) can't
be created with non-existent Pool (connection or multi) (wliPool)
at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:260)
at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
<Jun 13, 2003 5:02:49 PM IST> <Alert> <JMS> <040052> <JMSServer "WLIJMSServer",
store failed to open, java.io.IOException: JMS JDBC store, connection pool = <wliPool>,
prefix = <myserver___PBPUBLIC>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <wliPool>, prefix = <myserver___PBPUBLIC>:
connection pool does not exist
>
<Jun 13, 2003 5:02:52 PM IST> <Error> <Connector> <190024> << Calumma LDAP JCA
Resource Adapter_LdapConnector > Error making initial connections for pool. Reason:
CreateManagedConnection Error: 192.168.66.144:389>
<Jun 13, 2003 5:03:04 PM IST> <Error> <AI> <000000> <Failed to initialize the
WLI-Application Integration enterprise application due to an exception while initializing
JMS resources.
com.bea.wlai.JMSResourceException: Failed to initialize the WLAI asynchronous
service request JMS Queue 'WLAI_ASYNC_REQUEST_QUEUE' bound at JNDI context 'com.bea.wlai.ASYNC_REQUEST_QUEUE'.
Root Cause: javax.naming.NameNotFoundException: Unable to resolve 'com.bea.wlai.ASYNC_REQUEST_QUEUE'
Resolved: 'com.bea.wlai' Unresolved:'ASYNC_REQUEST_QUEUE' ; remaining name 'ASYNC_REQUEST_QUEUE'
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:263)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:230)
at weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:337)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:332)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.bea.wlai.JMSHelper.initQueue(Unknown Source)
<Jun 13, 2003 5:03:05 PM IST> <Critical> <WebLogicServer> <000286> <Failed to
invoke startup class "LwcStartup", java.lang.ClassNotFoundException: com.bea.lwclient.Startup>
<Jun 13, 2003 5:03:07 PM IST> <Notice> <Management> <141052> <Application Poller
started for development server.>
<Jun 13, 2003 5:03:11 PM IST> <Error> <HTTP> <101165> <Could not load user defined
filter: com.bea.b2b.transport.http.TransportServletFilter
java.lang.ClassNotFoundException: com.bea.b2b.transport.http.TransportServletFilter
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:179)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:62)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:41)
at weblogic.servlet.internal.WebAppServletContext.loadClass(WebAppServletContext.java:4714)
at weblogic.servlet.internal.WebAppServletContext.registerFilter(WebAppServletContext.java:2446)
at weblogic.servlet.internal.WebAppServletContext.initFilters(WebAppServletContext.java:2433)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:2703)
at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:563)
at weblogic.servlet.internal.WebService.preloadResources(WebService.java:476)
at weblogic.t3.srvr.ServletInitRunner$1.run(ServletInitRunner.java:50)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:46)
at java.lang.Thread.run(Thread.java:536)
>
<Jun 13, 2003 5:03:11 PM IST> <Error> <socket> <000433> <Unable to load performance
pack, using Java I/O instead.
Please ensure that libmuxer library is in :'/home/tsuresh/j2sdk1.4.0/jre/lib/i386/client:/home/tsuresh/j2sdk1.4.0/jre/lib/i386:/home/tsuresh/j2sdk1.4.0/jre/../lib/i386'
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1410)
at java.lang.Runtime.loadLibrary0(Runtime.java:772)
at java.lang.System.loadLibrary(System.java:832)
at weblogic.socket.PosixSocketMuxer.<init>(PosixSocketMuxer.java:180)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:296)
at java.lang.Class.newInstance(Class.java:249)
at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:54)
at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:37)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:205)
>
<Jun 13, 2003 5:03:12 PM IST> <Notice> <Management> <141030> <Starting discovery
of Managed Server... This feature is on by default, you may turn this off by passing
-Dweblogic.management.discover=false>
<Jun 13, 2003 5:03:12 PM IST> <Notice> <WebLogicServer> <000354> <Thread "ListenThread.Default"
listening on port 7010>
<Jun 13, 2003 5:03:12 PM IST> <Notice> <WebLogicServer> <000331> <Started WebLogic
Admin Server "myserver" for domain "ldap_adapterdomain" running in Development
Mode>
<Jun 13, 2003 5:03:15 PM IST> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Jun 13, 2003 5:03:15 PM IST> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
<Jun 13, 2003 5:04:18 PM IST> <Error> <AI> <000000> <Could not create NamespacePersistence
Object.
-------- Begin level 0 Exception Stack Trace --------
com.bea.wlai.repository.PersistenceException: Failed to initialize WLI repository
access layer for the Application Integration subcomponent because the JDBC data
source was not found at JNDI name WLAI_DataSource due to Unable to resolve 'WLAI_DataSource'
Resolved: '' Unresolved:'WLAI_DataSource'
at com.bea.wlai.repository.NamespacePersistence.initDataSource(Unknown
Source)
at com.bea.wlai.repository.NamespacePersistence.<init>(Unknown Source)
at com.bea.wlai.NamespaceManagerImpl.<init>(Unknown Source)
at com.bea.wlai.NamespaceManagerImpl.getInstance(Unknown Source)
at com.bea.wlai.client.bean.NamespaceManagerBean.establishImpl(Unknown
Source)
at com.bea.wlai.client.bean.NamespaceManagerBean.ejbCreate(Unknown Source)
at com.bea.wlai.client.bean.NamespaceManagerBean_k6j0cj_Impl.ejbCreate(NamespaceManagerBean_k6j0cj_Impl.java:122)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
at weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:101)
at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:142)
at weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:127)
at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:61)
at com.bea.wlai.client.bean.NamespaceManagerBean_k6j0cj_EOImpl.getRootNamespace(NamespaceManagerBean_k6j0cj_EOImpl.java:83)
at jsp_servlet.__nshierarchy._jspService(__nshierarchy.java:115)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:543)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:369)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:136)
at jsp_servlet.__display._jspService(__display.java:511)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
rgds
Suresh.K
1) http://commerce.bea.com/showproduct.jsp?family=WLP&major=8.1&minor=4
2)Make sure you add your JDBC drivers to the beginning of CLASSPATH in either setDomainenv.cmd or setEnv.cmd
3)What really helped was BEA support and playing with BEA's JDBC example that shows how to create and deploy and use a data source.
http://dev2dev.bea.com/codelibrary/code/examples_jdbc.jsp -
Generation error during WebDynpro migration from 7.0 to 7.31
Hello everybody!
We are trying to migrate some WebDynpro DCs to NW 7.31. After checking in the old sca file into the new track, synching the DCs in NWDS and creating projects for them, most of the DCs compile ok, but we get a build error in one WebDynpro DC we are not able to resolve.
The build.log shows
[wdgen] [Error] Generation error while processing <somepath>/NWDSWorkplace_7_3.jdi/2/t/C5FB4D1181864A07E2DF8F1E8D280266/gen_wdp/packages/de/xxx/somepath/wdp/Resource<myview>.properties (java.lang.reflect.InvocationTargetException)
with the stack trace showing an Generation error while processing template defaultResource:
[wdgen] [Info] Generation error while processing template defaultResource
[wdgen] [Info] Catching throwable null
[wdgen] [Info] java.lang.reflect.InvocationTargetException
[wdgen] at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
[wdgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wdgen] at java.lang.reflect.Method.invoke(Method.java:597)
[wdgen] at com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:139)
[wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:207)
[wdgen] at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:164)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentDefaultResource(Generation.java:541)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentResources(Generation.java:3188)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1788)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1772)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generateComponentsForArchive(Generation.java:2660)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generateMDOsForArchive(Generation.java:2604)
[wdgen] at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1630)
[wdgen] at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
[wdgen] at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
So far, everything I could find is pointing to some localisation issue, but I'm not able to solve the problem. Some hints say I'd have to change the language settings of the DC (or SC) upon import, but I never saw anything that gave me an opportunity to do so. On the other hand, other WebDynpro DCs in the same track get imported o. k. and compile without any error.
The other thing I see in this WebDynpro DC is that in some views, all GUI element texts are missing, some views are o. k.
Can anyone shed some light on this issue ?
Thanks
MichaelOk, I can provide some more information:
In the WebDynpro DC's .dcdef file, I changed
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
<domain>BC</domain>
<originalLocale>en</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
to
<properties>
<localization xmlns="http://xml.sap.com/2003/06/Localization" xmlns:ns0="http://xml.sap.com/2003/06/Localization">
<domain>BC</domain>
<originalLocale>de</originalLocale>
</localization>
<minimizeClassFiles xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro" xmlns:pns1="http://xml.sap.com/2004/07/DCProperties/WebDynpro">auto</minimizeClassFiles>
<projectVersion xmlns="http://xml.sap.com/2004/07/DCProperties/WebDynpro">1</projectVersion>
</properties>
After that, the views with previously missing GUI texts were showing these texts inside the NWDS WebDynpro view editor, and those views that did previously show these text didn't show them any more! So there seems to be some discrepancy regarding the language the views were created in.
Any hint on what files have to be changed in what way to either remove internationalization completely or to set all views to a single language ?
Thanks
Michael -
Problem in assigning Webdynpro view to BPM task
hello all,
I have a webdynpro application using EJB Model. Now I am trying to embed this application into BPM. When I am assigning the view to a bpm task then it will show error that data type not supported like that.
In Component Controller's context and Interface's context I am using context node through model node binding and in the model node i am using some Java Native datatypes like java.util.Date/java.lang.Long etc that are not supported in BPM tasks i think.
How can I handle this prob. thks in advance. It will very useful for me if somebody have some example that uses the webdynpro views along with EJB Model in that.Hi kapitsu,
not every data type is suppported by BPM.
May you have a look at
[Data Type Compatibility|https://help.sap.com/saphelp_nwce711/helpdata/en/63/9f9ca5bb234502bd7b02c91ac6040a/content.htm]
Or at
[SAP Message 1266539|https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1266539]
There are also some examples where it works:
[CE 7.1 Samples|SAP NetWeaver Composition Environment Samples Center ]
[Modeling Your First Process with SAP NetWeaver Business Process Management|SAP NetWeaver Business Process Management Resource Center;
Maybe it helps. -
Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SGIs this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway -
Error message for View Container Element that is no longer existing
Hi Experts,
i have problem in my webdynpro component. After perform the Code Inspector I get a error message accordingly View Container element.
In one of my view I have rename the name of a viewcontainer element.
Afterwards I could the find the ViewContainer element with new name in my window. But there is also displayed the view container element with the name before renaming. Therefore the code inspector give the error message:
"View Container ..... does not contain a View Container UIelement".
I try different ways to solve it, but it is not possible to delete the displayed ViewContoinerElement in window(that is no longer existing) and it is also not possible to find the ViewContainerElement with the old name in the View.
Thanks in Advance.Hi,
Instead of trying to delete the View Container UI Element in window, Delete the View itself in window and then re-map it again to the window by simply drag and drop.
Hope this helps u,
Thanks & Regards,
Kiran. -
NWDS WebDynpro views are not refreshing after changes in layout...
Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JVHi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
I'll let this question unanswered until this fix comes out.
Cheerio !
JV -
Materialized View creation with REFRESH FAST
Hello ,
Please see below case,
TABLE A1(partitioned range+list)
COLUMN C1 -- Primary key
COLUMN C2 -- NUMBER
TABLE D1
COLUMN C1 -- PRIMARY KEY
created MV log as below
CREATE MATERIALIzED VIEW LOG ON A1 WITH ROWID,PRIMARY KEY INCLUDING NEW VALUES;
CREATE MATERIALIzED VIEW LOG ON D1 WITH ROWID,PRIMARY KEY INCLUDING NEW VALUES;
Trying to create MV like below:
CREATE MATERILIZED VIEW mv1test
REFRESH FAST ON COMMIT
AS
Select
FROM A1,
D1
WHERE A1.C1 = D1.CI
AND A1.C2 IS NOT NULL;
It gives below error message:
ORA-12052: cannot fast refresh materialized view schema.mv1test
12052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause: Either ROWIDs of certain tables were missing in the definition or
the inner table of an outer join did not have UNIQUE constraints on
join columns.
*Action: Specify the FORCE or COMPLETE option. If this error is got
during creation, the materialized view definition may have be
changed. Refer to the documentation on materialized views.
However ,as discussed in earlier thread i checked all general restrictions of the 'Refresh fast' approach for join.
Restrictions on Fast Refresh on Materialized Views with Joins Only
Defining queries for materialized views with joins only and no aggregates have the following restrictions on fast refresh:
1) They cannot have GROUPBY clauses or aggregates.
2) Rowids of all the tables in the FROM list must appear in the SELECT list of the query.
3)Materialized view logs must exist with rowids for all the base tables in the FROM list of the query.
4)You cannot create a fast refreshable materialized view from multiple tables with simple joins that include an object type column in the SELECTstatement.
As per above restrictions ,
1) Group by clause is not present
2)i do not understand 2nd point , i have added a1.rowid and d1.rowid in select statement of MV, but got same error.
3) observed same as 2nd point.
4)we have CLOB column in select list. Tried removing this column but got same error.
Please do let me know any workaround on this.
Thanks in advanced ..
PMBasic Materialized Views show how to analyse MVs using dbms_mview. I'm not sure about creating MVs on partitioned tables, that partition maintenance might cause problems
-
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
Maybe you are looking for
-
Problem with apply changes on master-detail with respect to date handling
dear sir, i have one tabler where in i have created from_Date and to_date as varchar2(30) each. I stored the from date as 'dd-mon-yyyy hh24:mi' I had written before header process for calculating no of days between from_Date and to_Date using the sai
-
I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi
-
Two devices, two different podcast configurations?
I fear I may have posed a question to the wrong sub-forum, so I'm asking again here. I'm sure someone has this answer to this, and I'd appreciate your expertise I have an iMac, and use it to sync and manage my podcast playlists for an iPod Touch and
-
Trouble updating Topaz Labs plug-in
I'm running Topaz Lab's Black and White plug-in under Aperture. When I get into the plug-in it tells me there is an update available, but when I go to update I get a "Download Failed" error. Something about "Cannot open /: Path is a directory" erro
-
If have installed iDS 6.0 on Solaris 8 Box
I do updates nighlty vi ldif and use ldif2ldap (which calls ldapmodify -c -a ...) but it only adds entries to the database what if I make a change to an existing user in my ldif? From what I can tell, it doesn't get proagated. How can I rewrite the d