Error inALE service (Segment type not maintained in Message type) status:29
Hi all,
Need your help.
I have a added the a segment to the message type and which is linked in WE82( Message type:Debmas,basic type:debmas06 and extensionZxxx). And the segment is also set for release.It is an outbound senario. When i process it manually in WE19 using the basic type with the enhancement and via message type (with the message type and the extended type) I can process the idoc and the segment whic i have added with the following fields are displayed. But when i post the customer in BD12 with the message type I am getting the error in BD87 as " error in ale service Segment type ZXXX does not exist in message type DEBMAS".
PLease do the needful. Its since 2 days I am struck with the same and was trying but I could not get any. Hope you guys might help me.
Anything else to be refreshed or anything else to be done except we31.we30, we81
Thanks in advance.
Edited by: Farhy Farhy on Aug 2, 2010 12:29 PM
Thanks for your reply Mr. Das.
I have tried all the things and did not find any solution..
Posted after checking all the things and the procedure. I did not write any custom program. Earlier I created the extension type and deleted and created the new extension type. But now it is taking the same old extension type and giving the error as the extension type is not maintained in the message type.
I have deleted the old extension type completely but the old is onle getting reflected. Anything to be done to refresh.
Waiting for the reply.
Similar Messages
-
Object type not maintained for message type
Hi,
I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
If anyone has worked on change pointers, please guide me in solving this error.
Thanks
HariHi
Which msg type u r using there.
Regads,
Prasad. -
Custom segment does not exist for message type Debmas_cfs
Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabhHi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi -
ERROR: "The IDoc interface is not complete for message type DELINF"
Dear All,
The ERROR happens when I use IDoc inbound test tool:
- Basic type used: DELVRY06
- Basicallly this IDoc is supposed to create inbound PGI of a DO. I just put the DO number in WE19.
But ended up with the error mentioned. Let me know if oyu need more details.
Thanks and regards,
Will.Hi,
Please check whether the partner profile configuration is done completely such as any message control parameters are fine or not.
Regards
Archanaa -
Logon Error Message - Enterprise Services Builder address not maintained
Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani -
Error "web service destination is not configured" in CTS+
Hi experts,
during deployment with CTS+ I get the error "web service destination is not configured" (see below). In fact there is a web service to be deployed and a WebDynpro-DC using this web service as adaptive web service model. The model uses the destination DACC_PI_WS_METADATA_DEST and DACC_PI_WS_EXECUTION_DEST. I configured both destinations in the server with type "WSDL".
Any idea what goes wrong?
Regards,
Christoph
1 ETP199 ######################################
1 ETP199X######################################
1 ETP189 DEPLOYMENT
1 ETP101 transport order : "JADK900006"
1 ETP102 system : "JAQ"
1 ETP199X######################################
1 ETP189 DEPLOYMENT
1 ETP101 transport order : "JADK900006"
1 ETP102 system : "JAQ"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.29" "700"
1 ETP198
2 EPU601X"CTS Deploy Service - Version 0.92" "06.03.2007" " " " "
2 EPU602 "==================================================""======================"" "" "
===="" "" "
2 EPU601 "Deploy web service destination =" " " " " " "
2 EPU601 "Directory =" "/usr/sap/trans/data" " " " "
2 EPU601 "SDM Deploy URL =" " " " " " "
2 EPU601 "SLD Deploy URL =" " " " " " "
2 EPU601 "XI Deploy URL =" " " " " " "
4 EPU607 Non-ABAP system "JAQ" (communication system "KSM")
4 EPU601X"Deploy for" "SDM" " " " "
4 EPU601 "Deploy File =" "karmann.comSC_DACCDIP_DACCD_C~20081001122205.sca" " " " "
4WEPU601 "Web service destination is not configured" " " ", deployment skipped" " "
4WEPU601 "Return Code =" "4" " " " "
4WEPU601 "Highest Return Code =" "4" " " " "Hello,
I am getting an identical error per below. I have checked Web deploy service, CTSDEPLOY setup in SM59 etc and looks OK, yet the issue still occurs:
Deployment
Transport request : BWDK903389
System : BWQ
tp path : tp
Version and release: 372.04.36 700
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy web service destination =
Directory =
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
Double-stack system BWQ
Deploy for SDM
Deploy File = CTSTEST_20081008_123719.epa
Web service destination is not configured , deployment skipped
Return Code = 4
Highest Return Code = 4
Deployment
End date and time : 20081015162015
Ended with return code: ===> 4 <===
Anyone have any ideas on this one?
Thanks & Regards,
Michael -
CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED
dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regardsDear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj -
Recipient type not maintained in Vendor master During TDS deduction
Hello Gurus,
My client Posted somany Documents deducting TDS, but during deduction time all other vendor masters (except one or vendors) were not maintained with Recipient type. due to this system has taken posting date as due date for challan payment.
for example if the document was posted on 10 Oct 2009, system showing due date as 10 Oct 2009 in t Code J1INMIS ( challan update tab). Documets pertaining to those vendors maintained with Recipient type is correctly showing due date as 06 Nov 2009.
now when i want to make challan in J1INCHLN documets pertaing to the correct vendors are being up by the system. but other line items are not picked up..
how to solve this problem >?//
Please advise..
Mamillapalli VNo i thought so,, but system picked up the posting date as due date. this happend only for those vendors in whose vendor masters the recipient type was not maintained.
For two three vendors where Recipient type was maintained those TDS line items due date is correctly showing as 06 Nov 2009. this iam telling for the same TAX TYPE (ex. IE.).
now, these few line items are only displayed in J1INCHLN. the input i have given is
Posting date 01 Oct 2009 to 31 Oct 2009
Section - 194C
iam still not convinced, Please advice..
Thanks in advance -
Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year. -
Dear Experts,
I am creating a po,the material is domestic spares excisable i.eDOM-S(E).valuation categarised as H.while saving purchase prder the system is displaying warning message as "valuation data for material xxxxxxxxx valuation type DOM-S(E) not maintained.why message is showing.what i can do ,to rectify the warning.please answer it.
Regards,
RamakrishnaHi,
Just check the material in the display mode T Code MM03, whether any Valuation type is maintained for this material . Check the valuation class/Price control/Procurement type also. Eg If it is Raw material then whatever valuation type defined in your company has to be given and procurement type -External has to be selected. After getting the correct valuation type u can go to T Code. MM01 and put the same material . Then it will ask for plant , storage location , valuation type , u can just put the particular valuation type. Select the views u want to maintain and then keep on entering and save it.
Go to PO , same valuation type has to be given..it will show a 'X' mark against that particular valuation type if u press F4. (Eg. x - Lcxin where Lcxin is valuatiopn type)
If its not appearing that means its still not assigned to that material . Then u have to again check in MM03.
resgards,
somu c -
Error while trying to post inbound idoc of message type COND_A
Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
MohitI do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated. -
"Goods Movement type not possiable with mvmt type 261"
Dear All,
I am doing 541 movement with Service order combination, i have found following error,
"Goods Movement type not possiable with mvmt type 261"
Can you help me for this error.
-Reards,
SunilGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
"error no:58" partner profile not maintained in idoc.
Hi to all,
i am new member to this site already searched forums for solution.
can anyone help us out to solve the following error while simulating inbound idoc.Error:58 " partner profile not maintained"
we tried with msg type CREMAS and DEBMAS.created partner profiles,rfc connection as procedural but same error results.
also give some useful links to process idocs.
we want ur valuable suggestions,thanks in advance.
regards
vinothHi,
link for inbound idocs is given below
[http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm|http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm]
[http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli|http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/]
Please check in the receiver side if the partner profile is configured correctly.
Go through the link below in order to maintain partner profile.
[http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm] -
Error : software component version does not support this object type.
Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PMHi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles : Process Definition
Service Definition
Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed -
Error in Costing for Routing not maintained
Dear Experts
We are working on ECC6.0, creating Material Cost Estimates with Quantity Structure.
The issue is we want the system to give error when Routing is not maintained for the Inhouse Materials.
I've seen system only issues msg CK 461 as a warning message when executing CK11.
This message moreover doesnt exist in Costing Error management.
I'd tried adding this message in OBMSG ans then maintaing it as error in OBA5 but still it is displayed as warning.
I've searched threads but didnt get any relevant results.
Please suggest a way out.
Regards
KapilDear Christian
Message CK 229 works but only if the routing is not maintained.
But if the routing is maintained but without operation, then system issues message CK 461 which seems is not configurable.
Can you suggest if an error can be given for such a case.
Regards
Kapil
Maybe you are looking for
-
Can someone help with this Actionscript 2.0 URL link problem
Hi I've created a button that when clicked needs to jump to a frame, play the animation and then load a web page from the net. I've got the first bit alright with on(release) { gotoAndPlay(81); But what Actionscript 2 do I need to put in to jump to a
-
How to change the details ina BPS workflow item
Hi, I'm working in a SAP BW 3.5 environment and I need to change some details in a BPS workflow item. Unfortunately I have never used BPS and am struggling to get to grips with it and also to resolve the issue. Can anyone advise on my issue and also
-
Dynamic LOV's - can we display more than one field in the Select list.
I have the following query. SELECT DISTINCT NAME d, legal_entity_id r FROM xle_entity_profiles ORDER BY NAME So the drop down would contain the Organizational Name - say in the case China mobilex The legal entity id is - 100 Issue, there's also a
-
Upgrade Solaris 10 to Solaris 11
Is there a How To guide, requirements, best practices, any kind of documentation? I can not locate anything along these lines, but I would think it would be an important item. Thank you, David
-
.AVI movie file cuts out halfway in.
Hey guys. I have an .AVI file, and every time I try to play it, it quits out at the exact same point, even though there's 2 more minutes left in the video. I have been able to view the two minutes of the video using "MplayerX", as the file won't even