Error Info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Update was terminated
System ID.... ZDE
Transaction.. ABUMN
Update key... 4CA0A62864FF0068E1008000093FF453
Generated.... 28.09.2010, 09:39:14
Completed.... 28.09.2010, 09:39:15
Error Info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
While transferring asset using ABUMN transaction I am getting this error message
I have implemented a implicit enhancement in FM AMBU_CALL_AC_DOCUMENT_POST in which BAPI_EQUI_CHANGE is used to change the equipment with the new asset no.When I comment the BAPI there is no error .What might be the cause of this error in the BAPI_EQUI_CHANGE and is there an alternative to this BAPI
I
Hi Praveen,
You can get the detailed error info for this error in SM13 transaction where we can check update error,which program/function module caused error in update task. You can also execute your code in bebugging mode from here.
The Error you got occurs when transaction / program tries to commit database that would result in a duplicate entry in a
table with primary key and hence the update failes,
Regards,
Pawan
Similar Messages
-
Error: 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Hi Guys,
I am trying to update the below transaction:
SPRO - Financial Accounting - Financial Accounting Global Settings - Tax on sales/purchases - Calculation - Settings for tax calculation in Brazil - Define FI/MM tax codes
But an error occurs after I save and generate the SAP request.
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Does anyone know how I can figure out it?
Thanks
Daniel DortaHi,
very the following Notes which can point to a solution:
734545 Cond.-Based Tax Calc: Shortdump when deleting defau
716654 Error in Condition Consistency Tool J_1B_CBT_CONSIS
686780 Consistency of Condition Tables of BR Tax Calculati
You can try to search more notes belonging to brazilian localization (xx-csc-br) -
Dear experts,
I got an error while creating a process order.System allowing to create a process order after saving througing an error
" Express document "Update was terminated" received from author "GLP Developer"
*'Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC".*
I did changed the number ranges for a particular order type.Created one order and prcessed.But again getting the same error while processing second order.
Thanks in advance,
Rambabu.K.
Edited by: RamPPQMPM on Nov 24, 2010 6:49 PMThe system is telling you that you have a duplicated key (record) in a table. You have to take a look into the userexits or enhancements applyied to your transactios in ordert to find a bad modifying of an stardard structure.
-
ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
When I created an Purchase Requistion via PS, I cannot save the requistion, the first message I from SAP office express is Update was terminated, and the error message information is as follows:
ERRO info 00671: Abap/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
What can be the problem?
Thank you.It seems there is a problem with PR number range....systems generate a PR number which is already existing in database....someone might have changed the number range....you may check that.
-
Dear Experts,
I am facing the problem, with T-code MIRO.
When we try to complete his activity in MIRO, it terminates with error 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC, but it gives the billing no. Again when we try to display the billing no, it says that the doc no is does not exist.
I have checked with number ranges in FBN1 also, How to change the status to "0" in FBN1 ? Wont it be a problem if we change the status to "0" now in production server..!!!
the update error as follows
1 CKML_F_POST_INDEX V1 (no retry) Initial
2 POST_DOCUMENT V1 Initial
3 FI_WT_POST V1 Initial
4 K_PARKED_DOCUMENT_DELETE V1 Initial
5 K_DOCUMENT_UPDATE V1 Initial
6 HFPV_POST_RPSCO_V2 V2 Initial
7 HFPV_POST_RPSCO_V2 V2 Initial
8 G_GLDB_POSTING_A V1 Initial
9 AC_DOCUMENT_MM_UPDATE V2 Initial
10 K_OPEN_ITEM_POST V1 Initial
11 MCE_STATISTICS_UPD_V2 V2 Initial
12 ME_UPDATE_INVOICE V1 (no retry) Initial
13 MRM_INVOICE_DOCUMENT_POST V1 Error
14 SD_SCD_IV_SELCRITERIA_SAVE_DB V1 Initial
15 SWE_EVENT_CREATE_IN_UPD_TASK V1 Initial
Error details
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Kindly suggest me the way how to do it..
Thanks
PriyaHi,
please check the numer ranges for the Billing Document in SPRO.
I guess there is something wrong with it.
The error occurs if you want to save a Billing document and the primary key for the number still existists in the database. Are you using internal number range?.
Have you changed the number range especially the current number manually?
Perhaps it has something to do with your activities from this thread.
How do I change invoice numbering.
Have you transported the number range object?
Thanks.
Deepak Sharma -
Hi
While uploading duty rate files provided by the data provider customs info ,at the time of saving , its throwing the below error .
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC .
There is no duplicate data in the XML file and data provider has also confirmed the same. Let me know if anybody has come across the same issue .
Thanks in advance.
Regards,
VaniHi Jasmit
Yes , as you have mentioned ,
After HTS data upload for 2012 through XML file ,system had 2 validity periods 2012-01-01 9999-12-30 and 2012-01-01 2012-12-31 . Hence now there is a issue of duplicate record ,since both periods are valid .
But the data provider customs info has confirmed they have sent only one record with validity period 2012-01-01 2012-12-31 .in the XML file .
How the record with validity period 2012-01-01 9999-12-30 is now there in the system
Is there a chance that the XML upload pgm in our system has generated this record ? How the upload pgm works ?
Regards,
Vanathi -
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Hi,
While creating a billing document I get following error
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Pls help
Points will be rewarded.
ThanksDear Sirs,
Even i am facing the same problem, but with T-code MIRO.
When we try to complete his activity in MIRO, it terminates with error 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC, but it gives the billing no. Again when we try to display the billing no, it says that the doc no is does not exist.
I have checked with number ranges in FBN1 also, How to change the status to "0" in FBN1 ? Wont it be a problem if we change the status to "0" now in production server..!!!
Kindly suggest me the way how to do it..
Rdgs,
Deepa -
Hi Gurus,
we are encountering an situation whereby, when a user creates and saves a PReq, the Preq number is displayed at the bottom, yet a termination message appears : '' ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC ''
have checked the number range and it doesnt seem to be that. May you please help
Regards
NsovoHello Mahee
Normally there are two reasons for short dump SAPSQL_ARRAY_INSERT_DUPREC
1, commit work in user exit;
2. inconsistancy between the last number in the table and the current number in the number range;
please check the short dump happens where inserts entry in table XXXX. check the lastest number in this table and compare it with the current number in number range object. In this case, the current number in number range is no larger than the lastest number in DB.
The solution would be to manually adjust the current number in the number range object in SNRO.
I hope the information is helpful.
Regards,
Jane -
Error 00671 ABAP/4 Processor SAP SQL-ARRAY_Insrt_Duprec
Hi Guys,
The user has started transaction VA02 and has added materials to existing order. Then when she clicked the save button, She got the message changes have been saved.
After that she got the express mail with ABAP/4 error message: SAPSQL_ARRAY_INSERT_DUPREC. All her changes were actually not saved and she has to dothe work again.
We already got the dump file in ST22 but we actually do not know how to check where the error occur. We also check if we could get a SAP note (formerly known as OSS) but were already implemented.
Please help me guys. Thank you.
BluetagHi,
The reason for this is duplicate records in a table, which SAP does not allow. Common reasons for this dump are:
1. Number range reset for the Sales Order number
2. User-exits causing multiple records of partners
Most common cause is incorrect coding in user-exits.
More analysis is possible only if you provide the programs where this error occurs, i.e. the lines similar to below:
"RAISE_EXCEPTION" " "
"SAPLCVV5" or "LCVV5U02"
"CVV5_EVENT_START_DISTRIBUTION"
Regards
Nikhilesh -
ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Transaction: VL01N
Error is : Express Document update was terminated Please Suggest
Please find the ABAP Dump bellow :
Short text
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in the ABAP Application Program
"The current ABAP program ""SAPLMBMB"" had to be terminated because it has"
come across a statement that unfortunately cannot be executed.
Please suggestAre you using Group Asset? If you are using group Asset, Pleaes check the Group asset sequential Number.
AS per my experience, the error is becuase of the sequential number duplication
Please check in tables ANEP, ANLC, ANLB, ANEK..... for sequential number.
Sequential number is the number which will be generated internally by SAP for evry transaction on single Asset. Sequential number limite is 999. System will remind us at 950 and then at 980.. and the reminding are buffer. We can use reminding numbers but we need to run respective Notes.
Regards
Vineel -
Info spoke error : ABAP/4 processor: DATASET_NOT_OPEN
HI all,
We have Infospoke with
Data source: 0MATERIAL and
Destination : BW_MAT
In process chain after this infospoke is filled we have ABAP Program
to Transfer Material Data.
In process chian the load is successfull till infospoke but failed at the ABAP Program with error
Error Mesg : ABAP/4 processor: DATASET_NOT_OPEN
Job shows cancelled in Batch monitor.
HOw to sole this problem ? I can learn more from your responses.I think there is some problem with your ABAP program.
Have you used OPEN DATASET statement, if so check if you have mentioned file path etc correctly.
Can you try debugging the code.
Hope this helps. -
ABAP/4 processor : ASSIGN_TYPE_CONFLICT
I am recieveing this error message ABAP/4 processor : ASSIGN_TYPE_CONFLICT when i ran a DTP from a flat file datasource
to the data source object (DSO) Can someone help me ?? please...Hi,
if you have written some own code in transformation please make sure that you are using fields witch have the same data type...
ASSIGN_TYPE_CONFLICT
DTP -ASSIGN_TYPE_CONFLICT
DTP failure
Regards
Andreas -
Hi Gurus ,
I am creating material with class and characters. class type is 001
While creating material through MM01, in classification view I am giving class and after that characteristics value of that class and after that material is saved but system is not taking the characteristic value and message is coming as --u201CExpress document "Update was terminated" received from author u2026.u201D
In SAP inbox message is coming as -- u201CError Info... 00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERRORu201D
And in SM14 error message is--u201CCLVF_VB_INSERT_CLASSIFICATIONu201D
Function Module CLVF_VB_INSERT_CLASSIFICATION
Status Update was terminated
Report LCLVFF40
Row 124
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Same type of error is coming while adding characteristics value for release strategy class type
032 following error is coming for that.
Function Module CLVF_VB_INSERT_CLASSIFICATION
Status Update was terminated
Report LCLVFF40
Row 85
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Please replyClose
-
Report giving error when scheduled in background (ABAP/4 processor:PERFORM)
Dear Freinds,
I have written a custom program and iam not able schedule in background, if check in SM37 the job getting canceleld and found as the error ABAP/4 processor: PERFORM_NOT_FOUND.
Please could you let me know should i specify in my custom program for get sucessfully run in background . or could any one please let me know any setting should be done for my custom program
regards
madhuriHi
when i run in foreground it is working perfectly. The Spool is not getting created.
regards
madhuri
Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM -
Hi SAP gurus,
I'm currently implementing automatic payment using DME to generate a text file, in a format that is specified by HSBC.
I read some articles about this topic and I have done these steps:
I created DME Format Tree (just a demo format tree).
I created a new Payment Media Format
Set up Payment Method and Assigned Payment Media Format.
But finally it didn't work.
After I run F110, the posting was okay but no Data Media File was created. The end of Job Log Entry look like below:
"Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001977, user ID DANGNH)
ABAP/4 processor : GETWA_NOT_ASSIGNED
Job cancelled"
I don't understand why it won't work. Does anyone here have any suggestion for this problem.
Thanks and regards.
HaiDang.
Edited by: Maxielight on Jun 28, 2010 2:14 PMDear Madhu,
I have followed your suggestion but It didn't work. I used transaction SE38 to run RGZZGLUX as yousuggested.
I used ST12 to analyse runtime errors and the analysis information look like below:
Short text
Field symbol has not yet been assigned
What happend?
Error in the ABAP Application Program.
The current ABAP program "SAPLDMEE2_ABA" had to be terminated because it has come across a statement
that unfortunately cannot be executed.
Error Analysis
You attempted to access an unassigned field symbol (Data Segment 8)
Any suggestion?
Maxielight.
Maybe you are looking for
-
Can a Column in a Project Plan be set to Read Only for everyone except Admins
At my company the Project Server Admins create the initial project plans. We want to add a new column that will designate each task in the plan as Capital or Operational. We do not want anyone to have the ability to change these. When the Project M
-
Hi, Is it possible to re-trigger deadline monitoring more than once, so that if a PO approver has not released a PO within 24 hours, they will receive a reminder every 12 hours until this task
-
Select a word using its quad points/rect in adobe reader using Javascript
Select a word using its quad points/rect point in adobe reader using Javascript
-
Dear All Please share the documents for the SCCM 2007 to 2012 migration. Regards, Siva.V
-
Hi All, I am trying to use the orcl:lookup-table for a view, where i pass an id and return the template no. orcl:lookup-table("CCS_DFLT_TEMP_BY_PERSON","EMPLID",ns0:emplid,"UP_TEMPLATE_NO","jdbc/PersonStore") Problem is that the CCS_DFLT_TEMP_BY_PERS