Error,Info Object 0CHNGID is requested.

Hi All,
I am new to BW/BI, and i am trying to upload data from flat file to BI system; I have uploaded the data successfully into PSA and then into InfoCube; But when i am trying to display the data in the cube i got some 4 errors, i managed to remove the 3 errors by successfully re-importing the  missing infobjects from BI Content.
How ever i was not able to overcome this error; it says, "Info Object 0CHNGID is requested", i tried to search this info object in the BI System so that i can also re-import the same but it is not available.
So can anyone of you assist me to overcome this issue.
Thanks,
Raghu

Hi raghavendra...
Its there in the Business content check it. i had checked it just now.
Can u tell me how you are checking the 0CHNGID?
Goto RSA1 -- BI Content -- object types -- infoobject -- search for info object -- and install it.
Regards
KP

Similar Messages

  • Dtp error info object and attributes

    i have 5 attributes
    i declared one as key infoobject
    others are just attributes.
    i loaded them into the psa.
    that has been no problem
    i want to load them into the infoobject
    key and the other 4 from psa and it says that the attriutes verison is incorrect.
    somebody has a hint?

    Does still not work...
    I want to explain again:
    1. I want to upload an infoobject and its attributes.
    File:
    #Value of Infoobject# Attribute # Attribute 2
    2. I loaded that into PSA
    3. I want to load that into Infoobject via DTP.
    Do I have to load all Attributes first alone? Is it not possible to load all of them together in one file? The Attributes are no nvaigationattributes or something like that...
    The error message from that request:
    Diagnosis
        Data record 1 & with the key '0000000062 &' is invalid in value 'attribute 1'
        &' of the attribute/characteristic USERID &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This

  • Upgrade to SCM7.0 DP info objects (Characteristics) long/short text issue

    Hi All,
    We have upgraded from SCM4x to SCM7.0. The info objects characteristics customized long and short text is not updated in SCM 7.0.
    Example: Info object 9ALOCNO standard long/short text is APO location. But in SCM4x they have changed to Plant. After upgrade this text is set to APO location, not the plant. Like this many chars text have been changed to SAP standard.
    When I try to change text of info object creates transport request.
    Is this standard behavour when we upgrade?
    Please share your thoughts and let me know for more information.
    Thanks,
    Sreeni

    Sreeni,
    With every upgrade the customization is lost. We will have to make a list of all customized objects and make the change again in the upgraded system.
    Hope this helps.
    Thanks
    Mani

  • System error - User not authorized to access requested Info Object!

    Hi, Experts,
    I have a user ID begin with S***, but when I click some links, the following message shows:
    "System error - User not authorized to access requested Info Object!"
    How could I have authorization to see these links?
    Thanks!
    Lorrie

    Hi Lorrie,
    If you are a superuser, you should not get this error.
    If not, you can not change any autohorizations.
    Check it out.  For your job, you have to be a super user.
    Thanks,
    Gordon

  • Delta Request deletion from info object

    Hi,
      We are loading 'DELTA's' for master data to an info object.
      Last night delta was failed due to idoc error.
      how can i delete the delta request from the info object and re do the delta again...
      I inserted the info object as data target so that i can get an option of manage on context menu...but when i did that there are no requests show in the manage of info object
    how can i delete failed data request from an info object and re do the delta  again
    Thanks

    Hi BW KING,
    An infoobject can be a data target and also use direct update. Are you loading using an InfoSource? Check where you have the load infopackage, if it's under an infosource, you can do that. If you have your infopackage under the infoobject "icon" (without update rules), then you don't have the option to manage the loads.
    Hope this helps.
    Regards,
    Diego

  • Error while creating info object

    error while creating info object a character
    Info object may be a maximum of  000060 digits...... what would be the error?
    Thanks ALL

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Error while assigning objects to Transport Request

    Hi All,
    while  assigning a Transfromation to a Treq i am getting an error saying
    Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.
    Kindly advice how to rectify this error

    Hi,
    You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
    See OSS Notes:
    Note 613581 - Transfer structure does not exist in version 'D'
    Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
    Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
    Thanks
    Reddy

  • Error while activating the info object.

    Hi,
    While activating one of the info objects, i am getting the following error message:
    Characteristic 0BP_GRP: Cannot switch off InfoProvider property
    Message no. R7B289
    Diagnosis
    The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
    Procedure
    If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
    Thanks and Regards
    Niren.

    Hi Niren,
    Check the below thread..
    Howto Remove 0Employee Char from my InfoArea
    Hope it helps..
    Regards,
    Ramki.

  • Error in char. Info Object

    I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
        "Name of the Characteristic is Reserved".
    Can nyone plz let me know how to resolve it.

    Hi,
       Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
    An attribute must be a different infoobject.
    For eg.
    CHAR        ATTr
    MATID       MATTYPE
    You cannot have
    MATID as the attribute of MATID.
    Regards.

  • Error in transporting info-object

    Hello Experts,
    We need to a import an info-object from Quality to Prod.
    From Dev to Quality the transport was successful, but while transporting from
    quality to prod we are getting the following errors:
    Changes cannot be made, display user only
    And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
    now inactive in the prod. enviornment.
    Could anyone advice on what may be the source of this error??
    Thanx and Regards
    Priyanka

    Hi Priyanka,
    Pls check below threads, may be it will helpfull to you.
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
    https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
    https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
    https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
    Thanks & Regards,
    Ramnaresh .P.

  • Error in transpoting info object

    Hello,
    Need help to solve this please!
    I am getting an error while tranporting an info object!
    Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
    Message no. R7195
    Diagnosis
    Possible causes:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me please!
    Regards
    RAm

    Hello,
    Help me to solve this !
    I cant transport the info object !
    It says:
    Function module DB_CREATE_TABLE
    There is not enough room in the table space.
    Procedure
    In this case, check the logs on the database and extend the table space if it is too small.
    Help me!!
    Regards
    Ram

  • Error while creating Info Object in Info object catelog

    Hi experts,
    I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
    can any one tell what's the problem and what needs to be done.
    Sumantra

    Hi
    let me know weather r u using any reference object which contain the routinee.
    regards,
    chandra.

  • Error when assigning SID while uploading text in the info-object of the DSO

    Hi
    I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
    I have created the info-object which is char 60 which has the master data text activated.
    In the DSO transformation I have mapped it to the R/3 field.
    While activating the data in DSO its giving the error message
    'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
    'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
    How to overcome this issue.
    Please advise.
    Thanks in advance.

    Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
    If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
    TRANSLATE column TO UPPER CASE.
    Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

  • Error in Transport the info object

    Dear all,
    i am trying to transport  the info object 0CM_CTAR
    during transpot i am getting the error as
    Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
    but i checked in development i  not got any error but when i am trasport iam getting error.
    Regards,
    siva.

    HEllo,
    Please see these OSS Notes
    1139547 - Transport of InfoObjects RC = 8
    1100575 - InfoObjects: Using units in compounding
    The other way is to use a Z* object referenced to needed unit object  in the compouding,
    Regards,
    Shashank

  • Error while adding an Info Object in an Info Cube

    Hi Experts,
    I am trying to add one InfoObject to my info cube but I get following error:
    "InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
    The Data Type of the InfoObject is TIMS.
    The Reference Char. for it is 0TIME
    And in other Properties Attribute only is checked.
    but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
    Please let me know to add it in cube.
    Regards
    Shubh Karan

    hi,
    u will not be able to add an 'attribute only' info object as characteristic in the cube
    it can only be added as an attribute in another master data characteristic. so if u still want  to include this info object , u need to unchecck 'attribute only' flag.
    hope it helps
    Regards,
    Rathy

Maybe you are looking for