Error initializing server: IO Error: The device is not ready

Hi, I copied JDev 10.1.3 on my notebook and when I tried to start embedded OC4J I get the following message:
Error initializing server: IO Error: The device is not ready
What should I do? Thanks

If I read correctly, you just copy the existing jdev installation on your PC to your notebook. That sounds like a very dubious practice to me. As seen by you in this particular example, hard-coded non-relative paths, host information, environment settings and etc begin to creep into various configuration or preference files once a piece of software go alive.
Any problem to start a new installation to your notebook?

Similar Messages

  • Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

    Hello, everyone.
    I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
    The delete works flawlessly. 
    Unfortunately, creating it isn't working, at all.  I get the following message:
    Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
    This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.)  I'm not getting any more details than the one error message.  Any idea of what could be causing this?  I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
    Thanks,
    ^_^

    Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
    Fixed.

  • "ERROR 21 the device is not ready" when use dism get-wiminfo

    I want to retrieve information about the OS images that are contained in a wim file.
    "dism /Get-WimInfo /WimFile:d:\sources\install.wim "was typed in the command line (system manager)
    but error 21 happened "the device is not ready". Actually I know little about computer and don't know how to fix it.
    the log file says as follows,
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 Scratch directory set to 'C:\Users\luckiing\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2015-04-20 13:12:36, Info                  DISM   PID=5204 TID=7720 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Failed to get and initialize the PE Provider.  Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Manager: PID=5204 TID=7720 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=8
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Executing command line: dism  /Get-WimInfo /WimFile:d:\sources\install.wim
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered.  Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: WimManager.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: VHDManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Getting Provider WimManager - CDISMProviderStore::GetProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized.  Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 WIM open failed. - CWimImageInfoCollection::Initialize(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimageinfocollection.cpp:76 - CWimImageInfoCollection::CreateWimImageInfoCollection(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 Failed to create the image info collection. - CWimManager::GetImageInfoCollection(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:3248 - CWimManager::InternalOpGetImages(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4043 - CWimManager::InternalCmdGetImages(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070015)
    2015-04-20 13:12:36, Error                 DISM   DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1928 - CWimManager::ExecuteCmdLine(hr:0x80070015)
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-04-20 13:12:36, Info                  DISM   DISM.EXE: 
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Found the OSServices.  Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-04-20 13:12:36, Info                  DISM   DISM Provider Store: PID=5204 TID=7720 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    Hi,
    According to the DISMI log, it seems like there is a problem with the WIM file. However, you can try to change a location for test to check its information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • C4440 scan error Operation could not be completed (error 0x00000015​). The device is not ready.

    I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
    When scanning I receive the following message:
    Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
    Please help!!

    Hello, nylamama:
    Follow the steps in this document, and you should find the help you need to resolve the error.
    Let me know if this helps, and thank you for contacting HP!
    Cheers,
    SN_63 (Saint Nana): I work on behalf of HP.
    Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

  • Scanner Operation could not be completed (error 0x00000015). The device is not ready.

    When trying to scan I keep receiving an error message.  Operation could not be completed (error 0x00000015).  The device is not ready.
    What does this mean?  I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
    Printer : HP PhotoSmart 2710
    Computer: HP Pavilion zd8000 (originally XP)

    Welcome to the Forum, losblanco,
    I checked on this for you and I think your answer is here:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
    If you don't find the solution there,
    or if you need help for any other reason,
    please come back and we'll take another shot at it!
    Good Luck!
    I hope this helps.
    Click The Kudos Star to say Thanks!       
    Set in Reply “Accept as Solution” if it’s fixed! 
    Kudos are Earned!
    Kind Regards,
    Dragon-Fur

  • MegaSky 580 - Presto! Error message "The device is not ready"

    Error message "The device is not ready. Please check whether your device is connected correctly."
    I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message.
    If I plug off the usb stick, presto! Do not see the device anymore
    I did have this problem since the beginning, I did try a lot ,
    I install also the updates for the “digital TV usb min receiver” and the updates for the presto software (from the presto and msi homepage).
    But nothing was helping.
    After a couple of weeks I needed to reinstall the laptop from scratch.
    And the first thing that I did was trying the presto software again, and it was working everything fine.
    After a couple of weeks I install some other stuff and all of the Microsoft patches,
    And I did get the same problem back.
    So it seems that something is disturbing the communication between the USB stick and the presto software, but what!
    The usb stick is working finr, I did try it with a powercinema trial version, and it is working, but why the OEM software of the USB stick not working, I hate it!
    It would also helpful, to get a kind of log functionalities, due to the fact,
    that no logs are available! Maybe somebody knows kind of switch to increase the verbosity and get an error log?
    I have seen the same problem in this and other forums, so I’m not the only one.
    But no solution found, maybe someone has found it…..
    System:
    HP nc6120 laptop
    XP SP2 all security patches installed

    ilko_t
    The Acer laptop, whic works with Mega Sky 580, is a celeron, can´t remember the exact spec., 1,5 Ghz, 1G DDR
    Think my faulty computer is similar to the one (B) you described... is it a Dell thing?
    Quote from: ilko_t on 20-June-06, 21:40:59
    I am having the very same problem:
    3 Systems:
    A- Desktop MB-Abit AN7, AMD Athlon 3000+ - working fine with all software and drivers updates. All aviable XP updates applied. XP Pro SP2
    B- Laptop Dell Dimension 6000, Intel Centrino, 1.6Ghz Mobile, 512MB DDR2- cannot get it working- tried all aviable updates, all XP updates applied, XP Home SP2, Intel Chipset drivers- newest, says every time "The device is not ready. Please check whether your device is connected correctly."
    C- Desktop Intel P4 3.0Ghz, 512MB RAM, Intel chipset- was working first 2 or 3 reboots then the same problem "device not ready", all updates, all XP updates, all motherboard updates, XP Pro SP2
    On systems B and C the tuner is recognised properly in Device Manager and correct drivers installed(the newest from MSI+software patch)
    The only logical conclusion I can make at this point is that there is something to do with the chipset make, as it works just fine on AMD and on Intel it won't, using the same software+drivers.
    Any other ideas? Or just dump the thing in the bin

  • Load report failed: The device is not ready [COMException (0x80004005)]

    Hi,
    In a deployed machine with the lastest Crystal Reports 2008 SP1 runtimes (Crystal Reports 2008 SP1 - Redist Install - Refresh) (it also happens with olders versions) I'm having the following problem:
    <SEE THE POST BELOW>
    This is a simple application that has a form with a button and one Crystal Reports Viewer. Pressing the button loads a report from the disk that uses a .xml datasource.
    What does the "device is not ready" means?
    I've checked the temporary files, the user has administrative rights, the form loads correctly the crystal report viewer.
    The operative system is Windows XP.
    Any clues of what it can be? In others computers it works just fine.
    Thanks in advance.
    Edited by: Jos Silva on Jun 3, 2009 8:51 PM - text formating problems

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The device is not ready.    at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at loading_times.frmLoadingTimes.btnLoadReport_Click(Object sender, EventArgs e) in C:\Users\jose.silva\PRIMAVERA\Crystal Reports 2008\loading-times\loading-times\Form1.vb:line 13
       at System.Windows.Forms.Control.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ButtonBase.WndProc(Message& m)
       at System.Windows.Forms.Button.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///h:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    loading-times
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///H:/primavera/Debug/loading-times.exe
    Microsoft.VisualBasic
        Assembly Version: 8.0.0.0
        Win32 Version: 8.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Runtime.Remoting
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    CrystalDecisions.CrystalReports.Engine
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
    CrystalDecisions.Shared
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
    CrystalDecisions.ReportAppServer.CommLayer
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    CrystalDecisions.ReportAppServer.ClientDoc
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    CrystalDecisions.ReportAppServer.DataSetConversion
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
    CrystalDecisions.ReportAppServer.DataDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
    CrystalDecisions.ReportAppServer.Controllers
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
    CrystalDecisions.ReportAppServer.CubeDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
    CrystalDecisions.ReportAppServer.ReportDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.1100.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
    BusinessObjects.Licensing.KeycodeDecoder
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.1.0.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
    System.Web
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///H:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
    CrystalDecisions.Shared.resources
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Shared.resources/12.0.2000.0_pt_692fbea5521e1304/CrystalDecisions.Shared.resources.dll
    CrystalDecisions.CrystalReports.Engine.resources
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine.resources/12.0.2000.0_pt_692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.resources.dll
    CrystalDecisions.Windows.Forms
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
    CrystalDecisions.ReportSource
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
    CrystalDecisions.Windows.Forms.resources
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.1.2000.882
        CodeBase: file:///H:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms.resources/12.0.2000.0_pt_692fbea5521e1304/CrystalDecisions.Windows.Forms.resources.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

  • MAX error insufficient location information or the device is not present

    Hello,
        We have been getting this error once in a while on our test system.  (See attachment)  Our system is running Windows 7, MAX 5.5.0f0, TestStand 4.2.1 and LabView 2010 SP1. 
       To get the error to clear and the system to run we have to go in and rename each VISA to a bogus name and save it.  Then go back and rename them back to what they should be and save again. 
       We get this error maybe once every 3 or 4 months, but it does stop production until we get in and fix it.  What is going on and how do we fix it?
    Thanks,
    Steve Feeser
    Attachments:
    MAX Error Message.png ‏43 KB

    Which program is this error occuring in? (Teststand or LabVIEW?)
       I am running a TestStand sequence and it is calling a LabView vi to set the power supply.
    How long do you run the program until the error occurs? (Are you running it the entire 3-4 months?)
       The system is typically run during 1st shift each day.   Powered off at night.
    What are the names of your VISA resources?
       "DCPS1" the power supply
       "DMM"  the multimeter
       "FREQ-CNTR"   frequency meter
    Are you referencing the VISA resources using the ASRL::INSTR aliases in your program, or something else?
       The vi specifies the VISA session. 
    NI recommended the method of temporary renaming of the handles, but they never gave a long term fix or root cause of the problem.  When it happens we rename each VISA by adding an additional character to the name and Save it.  Them delete the character and Save it again, as the original name.  We do that for each VISA then the TestStand sequence will run with no problems.
    Thanks,
    Steve

  • OC4J : error initializing server

    I'm recently download and installed Oracle 9i JDeveloper Release
    Candidate
    I followed the instructions in sampleREADME.html to setup and
    run the <JDEV9i>\bc4j\samples\OnlineOrderForClients example
    But all the JSP pages that I run ends with error:
    Error initializing server
    IO Error : The device is not ready
    But the connection MyOC4JConn to the Application Server test
    well !
    Please, I need help about this.
    Thanks !

    See Re: Displaying records with :SYSTEM.cursor_record stored in PL-SQL table on for one possible explanation.

  • "the system is not ready"

    hi
    i working in web project and and no error in compilation but once the project
    running get this message:
    07/03/08 00:20:42 Error initializing server: IO Error: The device is not ready
    07/03/08 00:20:42 Fatal error: server exiting
    Process exited with exit code 1.
    i don't know the problem in RAM or hard drive or what
    but i have 1GB RAM and good free space
    please , can any body help me?
    thanks

    Frank
    ............ welcom and thankyou, I'm sory for late
    infact i dont try another unzipining JDeveloper
    but every project i try to run same error
    i will try new unzipping and comeback again
    thankyou Frank again

  • TS1363 I'm trying to update to newest software, but during proccess, an error accured, now the iphone 4s wont do anything, it only shows plug into itunes. when i do, the device is not recognized by windows or itunes. any ideas?

    im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

    Greetings NI folks,
      I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
    Thanks.

    Duplicate Post
    Best Regards
    Hani R.
    Applications Engineer
    National Instruments

  • New ipod touch, Error: "The device can not be read or written to."

    I don't know what else to do!
    I also have an Ipod touch that just doesn't sync. When I connect the Ipod and launch Itunes to sync, it tells me that the device can not be written to:
    It just doesn't snyc at all. It's brand-new, out of the box and just doesn't work. And it's not my first ipod, so I know how to handle Itunes.
    That's what i've tried so far without success to solve the problem:
    * restored the touch hundreds of times, both in recovery and DFU mode and within the touch software
    * upgraded to firmware 1.1.4, downgraded back to 1.1.3, then to 1.1.2. and back to 1.1.4 - no change!
    * installed several different ITunes Versions and different Apple Mobile Device Services
    * tried MediaMonkey BETA with Ipod Touch support (this just creates 0kb files on the touch, but it also uses the mobile device service, so i guess the failure is somewhere there)
    * tried 4 different Windows XP systems with Itunes at my home and at friends (same error there as well)
    * restored my Windows XP with a recovery version and reinstalled Itunes completely from scratch
    * created a new user account in Windows XP and tried it with this one
    * launched Itunes with Internet switched off
    * used different USB ports - both 1.1 and 2.0
    * disconnected all USB devices
    * registered the necessary DLLs manually
    * last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)
    I don't have an apple in reach, so i'm not able to test it with an apple computer. There is also no apple store here in the country side of Germany.
    What else can be done? I know there are hundreds, that have the same problem but I don't know any more things to try. Now i have a 300 bucks touch i can not use as mp3 player...
    Message was edited by: basti007

    As I said, i did that! Quote:
    +* last week, I sent the ipod to Apple (they claim that everything is fine and the problem is just me and my computer and sent it back without change)+
    Today I got it back and nothing changed. I tried to call Apple Germany, but after i waited over 1,5 hours on the waiting line, i gave up.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I restored my ipod, when I went to put everything back on it, I got a message that said, "an error writing to the device, can not sinc.  Then it said the required disc can not be found.  Now what do I do, I have all of this music and apps that I can't get

    Before I restored my ipod, I backed it up then I updated and restored.  The problem is when I went to put everything back on it, I got a message saying that an error writing to the device, can not sync.  Then another message appeared saying that "the required disc can not be found.  Now what do I do?

    Try resetting the iPOd. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Also, delet the iPod Phot Cache folder for the second error. For its loation see:
    iTunes: Photo sync creates iPod Photo Cache folder

Maybe you are looking for