Error: insertion of infotype 1000 (return code 2)

Hi All,
We are trying to Update the Org Structure in ECC which is typically used for the MM Processes.
When ever we are trying to update the BP or create a new BP for Few Specific Company Codes we are receiving the below error
Error: insertion of infotype 1000 (return code 2).
SImilary we also see this error as well
Database update not possible, data record    01S 500304541001A0031
Your inputs are highly valuable.
Regards,
Satya

the problem you mentioned here is not the whole problem in my opinion, so let me take a few assumptions and you tell me if some/all of em are correct or alternately you put in more detail in your query.. ok?
well here goes:
1. you mentioned BP which is a business partner object but you did not talk about hcm at all so am assuming sap hr has not been implemented at all in your sap box... right/
2. then the infotype 100 and insert error is the least of your worries if the above point is correct.
3. then you also have some nominal positions in your sap box to support your logistics process...
4. and then I am taking a wild guess here --> you are trying to have a relation between a position and bp objects directly ...
well I may be totally off the rocker in the above but what you need to tell us  could be :
1. explain the business process.
2. then we talk about how you are doing the business process in sap (is hr implemented or not? if yes to what extent etc...) and dont limit this point to logistics,.. cover the whole gamut of how you are doing it in sap today and am sure it spans across hcm and logistics
3. then, a bit more info on what you were trying to do in a step by step fashion,... and where exactly you are encountering the error,.. --> the reason am asking for this is --> in my expereince I have seen a lot of logistics guys who are gurus intheir areas of expertise but you talk sap hr they are like babies,.. and the vice versa is also true,.. so if you are not able to explain point 2 above in full this point will give the complete technical picture.
provide the above and loads of folks here will be able to help you out.
cheers

Similar Messages

  • Error message 'insertion of infotype 1001 (return code 3)'

    Hello,
    I have an IDoc containing many object like 'CP' and 'S' with their IT1001 relationships in UPDATE mode.
    While posting the IDoc, it's going into 51 status with error message 'Error: insertion of infotype 1001 (return code 3)'.
    Could you help me any possible solution?
    Thanks.

    Hello,
    The IDoc contains IT1001 relationships in update mode of Object type 'S' and 'CP'.
    There is no structural issue with the IDoc contents.
    Is there any other specific issue?
    Thanks.

  • Insertion of infotype 1002 return code 3

    Hello
    We are replication data from HR to SRM system. In infotype 1002 subtype 9002 is maintained in HR.
    But in SRM server idoc is failing with errir 'insertion of infotype 1002 tthrough rh_insert_infty ,return code 3'.
    I could'nt find any record in SRM server with subtype 9002, please tell me if we need to create this subtype 9002 in SRM server
    and from where this description we can read in SRM server.
    Please help , its severity 1
    Thanks and Regards
    Manu

    Dear Manu,
    Yes you need to create this subtype 9002 in SRM system or else HR transfer will not be successful.
    Hopefully it will work.
    Regards
    Christine

  • Error in DB rollback/SyFlush, return code  000256

    Hi friends
    I have a problem with new instalaction over windows 2008 R2 and database DB6, the system sometimes is hang with error " Error in DB rollback/SyFlush, return code  000256", when check me the service of DB2 is down.
    Thanks in advance.
    Jose

    Hi, it is db2diag.log, this error down service of DB2.
    2011-11-24-15.00.06.217000-270 I6859178F336       LEVEL: Event
    PID     : 7384                 TID  : 7056        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7056                 EDUNAME: db2pdbe 0
    FUNCTION: DB2 UDB, RAS/PD component, pdDumpTempTableStats, probe:3531
    START   : db2pd -temptable started
    2011-11-24-15.00.06.233000-270 I6859516F337       LEVEL: Event
    PID     : 7384                 TID  : 7056        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7056                 EDUNAME: db2pdbe 0
    FUNCTION: DB2 UDB, RAS/PD component, pdDumpTempTableStats, probe:3661
    START   : db2pd -temptable finished
    2011-11-24-15.02.02.282000-270 E6859855F563       LEVEL: Error
    PID     : 7280                 TID  : 1704        PROC : db2fmp64.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1704
    FUNCTION: DB2 UDB, Administrative Task Scheduler, AtsTask::executeTask, probe:600
    MESSAGE : ZRC=0xFFFFFB38=-1224
    DATA #1 : <preformatted>
    [IBM][CLI Driver] SQL1224N  The database manager is not able to accept new requests, has terminated all requests in progress, or has terminated the specified request because of an error or a forced interrupt.  SQLSTATE=55032
    2011-11-24-15.02.02.313000-270 E6860420F414       LEVEL: Error
    PID     : 7280                 TID  : 1704        PROC : db2fmp64.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1704
    FUNCTION: DB2 UDB, Administrative Task Scheduler, AtsConnection::setApplName, probe:100
    MESSAGE : ZRC=0xFFFE7961=-99999
    DATA #1 : <preformatted>
    [IBM][CLI Driver] CLI0108E  Communication link failure. SQLSTATE=40003
    2011-11-24-15.02.02.313000-270 E6860836F412       LEVEL: Error
    PID     : 7280                 TID  : 1704        PROC : db2fmp64.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1704
    FUNCTION: DB2 UDB, Administrative Task Scheduler, AtsConnection::rollback, probe:900
    MESSAGE : ECF=0x82BA00E2=-2101739294
    DATA #1 : String, 64 bytes
    [IBM][CLI Driver] CLI0106E  Connection is closed. SQLSTATE=08003
    2011-11-24-15.02.02.313000-270 I6861250F340       LEVEL: Error
    PID     : 7280                 TID  : 1704        PROC : db2fmp64.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1704
    FUNCTION: DB2 UDB, Administrative Task Scheduler, AtsTask::run, probe:1200
    MESSAGE : ECF=0x82BA00E4=-2101739292
    DATA #1 : Codepath, 8 bytes
    4
    2011-11-24-15.05.10.669000-270 E6861592F888       LEVEL: Warning
    PID     : 7148                 TID  : 7624        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7624
    FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
    MESSAGE : ADM12007E  There are "13" day(s) left in the evaluation period for
              the product "DB2 Enterprise Server Edition". For evaluation license
              terms and conditions, refer to the IBM License Acceptance and License
              Information document located in the license directory in the
              installation path of this product. If you have licensed this product,
              ensure the license key is properly registered. You can register the
              license via the License Center or db2licm command line utility. The
              license file can be obtained from your licensed product CD.
    2011-11-24-15.05.10.700000-270 I6862482F857       LEVEL: Warning
    PID     : 7148                 TID  : 7624        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7624
    FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
    MESSAGE : SQL8007W  There are "13" day(s) left in the evaluation period for the
              product "DB2 Enterprise Server Edition". For evaluation license terms
              and conditions, refer to the License Agreement document located in
              the license directory in the installation path of this product. If
              you have licensed this product, ensure the license key is properly
              registered. You can register the license via the License Center or
              db2licm command line utility. The license key can be obtained from
              your licensed product CD.
    2011-11-24-15.05.11.246000-270 I6863341F544       LEVEL: Event
    PID     : 7148                 TID  : 1920        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1920                 EDUNAME: db2sysc 0
    FUNCTION: DB2 UDB, fast comm manager, sqkfBufferManager::initBufferManager, probe:10
    START   : Starting FCM Buffer Manager
    1 resource group(s).
    128 buffers allocated.
    Maximum number of buffers supported is 8192.
    Total buffer manager memory required for 1 logical and 0 fail-over partition(s) is 925712 bytes.
    2011-11-24-15.05.11.262000-270 I6863887F551       LEVEL: Event
    PID     : 7148                 TID  : 1920        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1920                 EDUNAME: db2sysc 0
    FUNCTION: DB2 UDB, fast comm manager, sqkfChannelManager::initChannelManager, probe:10
    START   : Starting FCM Channel Manager
    1 resource group(s).
    128 channels allocated.
    Maximum number of channels supported is 8192.
    Total channel manager memory required for 1 logical and 0 fail-over partitions(s) is 507928 bytes.
    2011-11-24-15.05.11.262000-270 I6864440F550       LEVEL: Event
    PID     : 7148                 TID  : 1920        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1920                 EDUNAME: db2sysc 0
    FUNCTION: DB2 UDB, fast comm manager, sqkfSessionManager::initSessionManager, probe:10
    START   : Starting FCM Session Manager
    1 resource group(s).
    128 sessions allocated.
    Maximum number of sessions supported is 64000.
    Total session manager memory required for 1 logical and 0 fail-over partitions is 1683456 bytes.
    2011-11-24-15.05.11.262000-270 I6864992F428       LEVEL: Event
    PID     : 7148                 TID  : 1920        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1920                 EDUNAME: db2sysc 0
    FUNCTION: DB2 UDB, fast comm manager, sqlkf_init_allocate_shared, probe:500
    START   : FCM infrastructure started
    FCM running in non-shared mode; FCM parallelism degree: 1; comm protocol: TCP/IPv4
    2011-11-24-15.05.11.355000-270 E6865422F450       LEVEL: Warning
    PID     : 7148                 TID  : 1920        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 1920                 EDUNAME: db2sysc 0
    FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
    DATA #1 : String, 16 bytes
    agentCachingFmp:
    DATA #2 : String, 3 bytes
    OFF
    DATA #3 : String, 5 bytes
    Flag:
    DATA #4 : Boolean, 1 bytes
    false
    2011-11-24-15.05.12.447000-270 E6865874F328       LEVEL: Event
    PID     : 7148                 TID  : 7624        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7624
    FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
    MESSAGE : ADM7513W  Database manager has started.
    START   : DB2 DBM
    2011-11-24-15.05.23.632000-270 I6866204F327       LEVEL: Event
    PID     : 6324                 TID  : 7032        PROC : db2start.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7032
    FUNCTION: DB2 UDB, base sys utilities, sqleIssueStartStop, probe:21
    DATA #1 : <preformatted>
    Single node instance [0] is starting
    2011-11-24-15.05.23.664000-270 I6866533F1686      LEVEL: Event
    PID     : 6324                 TID  : 7032        PROC : db2start.exe
    INSTANCE: DB2CAL               NODE : 000
    EDUID   : 7032
    FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
    DATA #1 : String, 44 bytes
    D:\db2\db2cal\db2_software
    bin\DB2STAR2.EXE
    DATA #2 : Hexdump, 256 bytes
    0x00000000001271E0 : 443A 5C64 6232 5C64 6232 6361 6C5C 6462    D:\db2\db2cal\db
    0x00000000001271F0 : 325F 736F 6674 7761 7265 5C5C 6269 6E5C    2_software
    bin\
    0x0000000000127200 : 4442 3253 5441 5232 2E45 5845 004E 4F4D    DB2STAR2.EXE.NOM
    0x0000000000127210 : 5347 0000 0000 0000 0000 0000 0000 0000    SG..............
    0x0000000000127220 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127230 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127240 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127250 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127260 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127270 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127280 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x0000000000127290 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x00000000001272A0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x00000000001272B0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x00000000001272C0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    0x00000000001272D0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
    2011-11-24-15.05.25.052000-270 E6868221F480       LEVEL: Event
    PID     : 7148                 TID  : 1396        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000         DB   : CAL
    APPHDL  : 0-7                  APPID: *LOCAL.DB2CAL.111124193525
    AUTHID  : SAPSERVICECAL
    EDUID   : 1396                 EDUNAME: db2agent (CAL) 0
    FUNCTION: DB2 UDB, Self tuning memory manager, stmmLog, probe:1008
    DATA #1 : <preformatted>
    Starting STMM log from file number 30
    2011-11-24-15.05.25.177000-270 I6868703F516       LEVEL: Event
    PID     : 7148                 TID  : 1396        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000         DB   : CAL
    APPHDL  : 0-7                  APPID: *LOCAL.DB2CAL.111124193525
    AUTHID  : SAPSERVICECAL
    EDUID   : 1396                 EDUNAME: db2agent (CAL) 0
    FUNCTION: DB2 UDB, config/install, sqlfLogUpdateCfgParam, probe:20
    CHANGE  : CFG DB CAL     : "Database_memory" From: "1120660" <automatic>  To: "1056608" <automatic>
    2011-11-24-15.05.25.489000-270 I6869221F445       LEVEL: Warning
    PID     : 7148                 TID  : 1396        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000         DB   : CAL
    APPHDL  : 0-7                  APPID: *LOCAL.DB2CAL.111124193525
    AUTHID  : SAPSERVICECAL
    EDUID   : 1396                 EDUNAME: db2agent (CAL) 0
    FUNCTION: DB2 UDB, base sys utilities, sqledint, probe:30
    MESSAGE : Crash Recovery is needed.
    2011-11-24-15.05.27.969000-270 I6869668F453       LEVEL: Warning
    PID     : 7148                 TID  : 1396        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000         DB   : CAL
    APPHDL  : 0-7                  APPID: *LOCAL.DB2CAL.111124193525
    AUTHID  : SAPSERVICECAL
    EDUID   : 1396                 EDUNAME: db2agent (CAL) 0
    FUNCTION: DB2 UDB, relation data serv, sqlrr_db_init, probe:700
    MESSAGE : DB2_IMPLICIT_UNICODE enabled
    2011-11-24-15.05.27.969000-270 E6870123F476       LEVEL: Event
    PID     : 7148                 TID  : 1396        PROC : db2syscs.exe
    INSTANCE: DB2CAL               NODE : 000         DB   : CAL
    APPHDL  : 0-7                  APPID: *LOCAL.DB2CAL.111124193525
    AUTHID  : SAPSERVICECAL
    EDUID   : 1396                 EDUNAME: db2agent (CAL) 0
    FUNCTION: DB2 UDB, base sys utilities, sqeLocalDatabase::FirstConnect, probe:1000
    START   : DATABASE: CAL      : ACTIVATED: YES
    thanks in advance
    JOse

  • Internal error: Recipient address not found.return code : 80

    Hi All,
    I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
    Status      trans.met sender recipient send date send time  status text
    Red mark  via. inter.  john      -           27.08.08   15:45:00  internal error: Recipient address not  found.return   code : 80
    Need solution urgently.

    Not in SCOT, If you read carefully i said,
    setup the Relay Agent in your SMTP server
    For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
    Regards
    Juan

  • Error in transport, ended with return code:  12,  job RDDEXECL cancelled

    Hi Friends,
    When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
    ===================================
    Program terminated (job: RDDEXECL, no.: 09222300)
       See job log
    Execution of programs after import (XPRA)
    End date and time : 20080509092238
    Ended with return code:  ===> 12 <===
    Job log:
    Date        Time      Message
    09.05.2008  09:22:23  Job started
    09.05.2008  09:22:23  Step 001 started (program RDDEXECL, variant , user ID DDIC)
    09.05.2008  09:22:23  All DB buffers of application server unix0001 were synchronized
    09.05.2008  09:22:25  ABAP/4 processor: UNCAUGHT_EXCEPTION
    09.05.2008  09:22:25  Job cancelled
    =======================================
    Kindly advice.
    Thanks & regards,
    Kunal Patel.

    Hello,
    I ran a search for this error and found the following notes:
    SAP Note 966234 - 70SP10: DTP transport and content error
    SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
    Check if they are relevant for your system.
    Regards,
    Siddhesh

  • Repair error in transport request with return code-0008

    hi!!
    I am getting error while importing a transport request by giving return code-0008.
    Can anyone explain me the reason and solution for the same.
    Rgds,
    Ajeet.

    Hi Ajeet,
                        Make sure that all the tasks whith in the request are released and they are in active state as well. Discuss with the owner of the CR and check all the objects are in active state and all the tasks are released. You can check with the logs as well to het more clues.
    Regards,
    Hari.
    PS: Points are welcome.

  • DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

    hello All,
    when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
    An error occurred when processing system
    Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
    How can I fix this error and delete or change my DBA jobs?
    My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
    Thanks
    Hernando

    Hello Hernando,
    Let's see what this SAP Note says,
    Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
    Edit: However, 'valid release' makes confusion
    Regards
    Subbarao
    Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

  • Error in phase IMPORT_PROPER  TP_BUFFER_INCONSISTENCY return code 8

    Hi,
    When applying add on programs ST-PI version 2008-1-700 (SAPKITLRDA) with transaction SAINT the TP_BUFFER_INCONSISTENCY error occured during the IMPORT_PROPER phase.
    Error message: Pkgs. in queue don"t exist in the tp buffer (e.g. SAPKITLRDA)
    It is not possible anymore to reverse the job as the data has already been loaded into the database. I checked the various messages in OSS and internet but could not find a solution for this problem. I only found an indication which could help solve the problem but I see that as a rigorous one.
    That one is:
    In our case it was due to probelm in transport buffer.I manually resetthe buffer using the following steps,
    In Se37,Use the function module OCS_RESET_QUEUE -> Single Test
    with the parameters
    IV_TOOL&H3DSAINT, IV_FORCE&H3DX
    Deleted all the files from \usr\sap\trans\tmp.Please make sure thatthere is no TP process
    or R3trans process running in the system at Operating system level.
    If any process exist, Please kill the process.
    Scheduled the program RDDIMPDP using Report RDDNEWPP in se38.
    Then restarted the import again and the problem was solved.
    Before I want to do to carry out above action I would like to get guidance and advice if this problem would help solve my problem.
    My release information is:
    SAP ECC 6.0 - MSSQL Windows XP
    Kernel 700 patch level 114
    I am using the latest version of the SPAM/SAINT tool (version 34).
    Thanks
    Toon

    I contacted SAP marketplace at the same moment I created this message and that really worked.
    Thanks to the diligent SAP support I was able to complete the import of the support package.
    This also means and that was confirmed by SAP that the usage of function module: OCS_RESET_QUEUE was not the solution of the problem. Basically it means that you need to contact SAP for help in those kind of situations.
    Thanks Uday for your response!

  • Document control failed due to error in [DOCMGR-CANCEL] with a return code

    i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
    I am doing the calcel like this
    Nav: buyer work centre --> order
    searche the po and then
    select order --> cancel then click GO button
    i gave the Reason as Cancel
    communication method: email
    Cancel Requisition: Yes
    Please help on this, its urgent.
    Thanks,
    Vijay.

    Hi Vijay,
    Check this MOS note.
    Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
    Thanks
    -Arif.

  • Transport error (Return code 12)

    Hi All,
    I recently migrated dataflows from 3.5 to 7.
    When I try to transport a transformation (between a DSO to cube) and its DTP, I am getting a transport error (short dump) ASSERTION_FAILED with Return code 12. Has anyone faced this problem before? Any suggestions are appreciated.
    I have transported so many migrated dataflows before but never faced this problem before. There is nothing really special about this transformation and DTP. So I am unable to understand what the problem might be.
    Thanks,
    Sirish.

    Hi,
    Check the dump in ST22 for detail message. Also, check the following notes:
    1114409
    1125231
    1152985
    1155036 : Transformation: Important corrections for BI SP 17-18
    1136924 BI7.0(SP18) Dump during content creation for conver
    1125231 BI7.0(SP17) Dump when you activate transformations
    1122482 BI7.0(SP17) Problems occur when you maintain units
    1094978 Transformation: Important corrections for BI7.0 SP1
    1090060 BI7.0(SP16) Enhanced transformation check
    1011475 Syntax error in CL_RSTRAN_TRFN_RULE after you import SP10
    Thanks..
    Shambhu

  • Traport importing problem with repeating return code error 8

    Hi all,
    We are facing some transport import problem.When we sent transport initially AAA900244,they faced with return code error 8 and syntax error 109.As the information provided by the client,one of the include  program which is not availble at client system that was included in this transport.So that was the problem.Again we have taken  new  tranport AAA900247 without this include program then same type of error message they faced with return code error 8 and syntax error 109 in the include program when imported.
    I have one doubt, when importing new transport this should overwrite the earlier transport data.Why the same type error client is getting.What might be the reason.
    Is earlier transport  imported?? Why it throwing same type error.What actually the fuctionality of Return code 8 whether it is imported or discarded.
    Thanks in advance.
    Regards.....Balu

    Hi Ramesh,
    That include is not at all required at client system.So next time when we have taken transport we have not included this include program.They imported new transport without this include program.But they are facing same error as they faced first time. What could be reason??
    Regards...Balu

  • DB-Connect Failed, Return Code  000256

    Hello,
    When I try to start SAP I get a SQL error saying "DB-Connect failed, return code 000256". Does anybody know what could cause this error and how to slove this problem.
    I checked the dev_w0 file as the following.
    trc file: "dev_w0", trc level: 1, release: "46D"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M

    B Sat May 09 21:08:37 2015
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
    B  Library 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is '46D.00'
    B  New connection 0 created
    M  relno      4640
    M  patchlevel 0
    M  patchno    534
    M  intno      0
    M  pid        2444

    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2444) [dpxxdisp.c   911]
    I  MtxInit: -2 0 0
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <ES> Memory Reset enabled
    X  ES initialized.
    M  ThSysUsrCheck: clear T0
    M  calling db_connect ...
    B  find_con found the following connection for reuse:
    B  0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
    C  Got ORACLE_HOME=D:\oracle\ora81 from environment
    C  Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
    C  Logon as OPS$-user to get SAPR3's password
    C  Connecting as /@PRD on connection 0 ...
    C  *** ERROR => OCI-call 'olog' failed: rc = 12505
    [dboci.c      2423]
    C  *** ERROR => CONNECT failed with sql error '12505'
    [dboci.c      6550]
    C  Try to connect with default password
    C  Connecting as SAPR3/<pwd>@PRD on connection 0 ...
    C  *** ERROR => OCI-call 'olog' failed: rc = 12505
    [dboci.c      2423]
    C  *** ERROR => CONNECT failed with sql error '12505'
    [dboci.c      6550]
    C  Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
    C  Logon as OPS$-user to get SAPR3's password
    C  Connecting as /@PRD on connection 0 ...
    C  *** ERROR => OCI-call 'olog' failed: rc = 12505
    [dboci.c      2423]
    C  *** ERROR => CONNECT failed with sql error '12505'
    [dboci.c      6550]
    C  Try to connect with default password
    C  Connecting as SAPR3/<pwd>@PRD on connection 0 ...
    C  *** ERROR => OCI-call 'olog' failed: rc = 12505
    [dboci.c      2423]
    C  *** ERROR => CONNECT failed with sql error '12505'
    [dboci.c      6550]
    B  ***LOG BY2=> sql error 12505  performing CON [dbsh    0695 ]
    B  ***LOG BY0=>  [dbsh    0695 ]
    B  ***LOG BY2=> sql error 12505  performing CON [dblink  0627 ]
    B  ***LOG BY0=>  [dblink  0627 ]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1069]
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   7751]

    M  Info for wp 0

    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sap_PRD_00 on host sap (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Sat May 09 21:08:37 2015
    M  *  RELEASE     46D
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        7831
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2444) [dpnttool.c   300]

    Hi,
    Restart the listener and try again. If that doesnt work, follow this note - 576919.
    Regards
    Cyrus

  • How to solve: DB-Connect Failed, Return Code 000256 ?

    Hi all experts:
        My operation system: Win2003 server
        database: SQL Server 2000 SP1
        Because of my database error, I have restore database from backup, now the database has started normally, but when I start SAP, in SAP management console, there syslog show error as: DB-Connect Failed, Return Code 000256.
    Then I go to F:\usr\sap\QAS\DVEBMGS00\work to see dev_w0, find the error as follow:
    X ES initialized.
    M calling db_connect ...
    C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
    C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
    C setuser 'qas' failed -- connect terminated
    C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
    C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
    C setuser 'qas' failed -- connect terminated
    C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'qas' setuser 'qas']
    C HandleOledbError [ExecuteAndFlush,line 36912]: Error/Message: (err 4604, sev 0), There is no such user or group 'qas'.
    C setuser 'qas' failed -- connect terminated
    C failed to establish conn. 0
    M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1197]
    M in_ThErrHandle: 1
    M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8847]
    M
    Can you help me? Thanks a lot.

    check note 98678 and 610640
    thanks
    prince

  • SAP BAPI return code in Agentry

    Hi all,
    I would like to know if it's possible in Agentry to consider an error code from the LT_RETURN table as a success? We are looking for a way to avoid faulty transaction in Work Manager 5.3 to block the rest of the transaction on the client side.
    Is it possible to treat an error code from the LT_RETURN table as a success code in Work Manager? For example, instead of showing an error, we would use this return code to display some sort of warning to the user.
    In other words, we want to let the user sending more transactions even if some of them fails in SAP.
    I am aware that we can discard faulty transaction with the error handling already in place. That might be our best solution so far, since we can hide all this to the end user.
    Thanks for your time.

    Hi Neilson,
    One way to do that would be to enhance the Syclo classes so they return a warning instead of an error. It would be a complex change because there are many classes you'd need to enhance. Also you'd need to define the business rules e.g. Do you want every error ignored? Should someone back in the office be notified that an error has occurred and attempt to rectify the problem etc.
    If you just want to avoid errors stopping the rest of the sync its probably best just to active the "enableTransactionFailureHandling" feature in SMP.
    Agentry Server Configuration
    Cheers,
    Stephen

Maybe you are looking for

  • CREATIVE ZEN TOUCH - CUSTOMER SERVICE WONT H

    CREATIVE, i will never ever buy another product from you again and will encourage all others not to buy from you because of your poor customer service. My problem is not with the product as such, i own a Creative Zen Touch and until about?6 weeks ago

  • Does Macbook have Virus protection, if yes, where can i find it on macbook?

    ive recently purchased a new macbook, i am unsure if it has virus protection already on it, or do i have to download it from someware?

  • Want to show the special characters in the tab page title.

    Hi, I am using oracle 10g forms developer and i have created the x bar chart. I want to give the tab page title of the x bar chart as x chart is it possible or any pjc available? Pls help me. Balaji Edited by: Balaji.M on Nov 15, 2008 3:54 PM

  • Creating A/R Invoice (Error -5002)

    Hi all, Does anyone know why this code would throw the "- 5002 Invalid total  [OINV.Address]" error? Any ideas? Here is my code, and datas: [code]Dim ReturnValue As Long Dim ErrCode As Long Dim ErrMsg$ = "" Dim vInvoice As SAPbobsCOM.Documents Dim iL

  • Exported MPEG file to iPod, but there is no sound...

    I purchased Quicktime Pro and read all the information on how to export a video file so that it plays on my iPod. I waited the 8-10 or so hours for it to export, and when I tried to play it back there was no sound for that file. HOW CAN I FIX THAT???