[ERROR]:INST-08010: Error in validating the port range for auto port allocation

I am installing OBIEE 11.1.1.7.0 on a linux x86 version. I get the below error when running the installer: [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL. [VALIDATION] [SUGGESTION]:Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL. [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [ERROR]:INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). installation Failed. Exiting installation due to data validation failure. Solution suggested on other post is below: your hosts file have duplicate name that point to two different IP addresses.  10.37.29.1    test1.xyz.com 10.10.10.1    test1.xyz.com But in my case, My host file has different entiries as shown below: 169.36.71.228 usl20027808.am.hedani.net  usl20027808 169.36.72.9    usl2002788.am.hedani.net usl2002788 Please suggest!

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

Similar Messages

  • INST-08010: Error in validating the port range for auto port allocation

    Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
    INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
    Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
    INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    My Operating System  below:
    Linux Red Hat 5.9 X86 64bit
    My uname -a are below:
    Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
    My /etc/hosts file are  below:
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1   localhost.localdomain localhost
    10.10.80.19 redhat59
    My /etc/sysconfig/network are below:
    NETWORKING=yes
    NETWORKING_IPV6=no
    HOSTNAME=redhat59
    GATEWAY=10.174.27.228
    My /etc/sysconfig/iptables are below:
    # Generated by iptables-save v1.3.5 on Tue Dec  3 17:01:17 2013
    *filter
    :INPUT ACCEPT [425:33860]
    :FORWARD ACCEPT [0:0]
    :OUTPUT ACCEPT [307:40164]
    COMMIT
    # Completed on Tue Dec  3 17:01:17 2013
    My ifconfig are below:
    eth0      Link encap:Ethernet  HWaddr 52:54:00:55:9B:C9
              inet addr:10.174.27.233  Bcast:10.174.27.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
              TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:110668992 (105.5 MiB)  TX bytes:209784134 (200.0 MiB)
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
              TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:257845896 (245.9 MiB)  TX bytes:257845896 (245.9 MiB)
    my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
    # Virtio Network Device
    DEVICE=eth0
    BOOTPROTO=static
    BROADCAST=10.174.27.255
    HWADDR=52:54:00:55:9B:C9
    IPADDR=10.174.27.233
    NETMASK=255.255.255.0
    NETWORK=10.174.27.0
    ONBOOT=yes
    Have any suggestion please?
    Many Thanks
    D

    In setDomainEnv.sh set debugFlag=false or you can just remove it.
    NodeManager is a charm after that. it can take any number of ports.
    Cheers !!

  • OBI11g intallation issue - Error in validating the port range for auto port

    I am using the intaller to install OBIEE 11g on my machine. When I get to step 6, I receive the error messages below. Currently I also have OBIEE 10g on my machine so the ports may be already used.
    Does any one know how I can resolve this issue? I previously installed both 10g and 11g on my old laptop but I can't figure out why I'm getting these errors this time.
    INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
    INST-08010: Error in validating the port range for auto port allocation. At least 9 ports should be free within the range 9700-9999 for the BI System Components.
    Ensure that a minimum of 9 ports are free within the range 9700-9999 for auto port allocation to work correctly for the BI System Components.

    your hosts file have duplicate name that point to two different IP addresses.
    10.37.29.1 test1.xyz.com
    10.10.10.1 test1.xyz.com

  • OID Installation error INST-5165 Error in validating realm

    Installation went fine, until the step for OID Information
    gives error INST-5165: Error in validating Realm, enter valid value for Realm
    version 11.1.1.6 on Windows
    Checked the password to contain at least one numeral

    yes, This is due to password validation. Password must contain at least one numeric.
    Invalid password : xyzabdP
    Valid Password : xyzabdp3

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

  • Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

    error has occured during install before the requested operation for I tunes could be completed  Your system has not been modified to complete the install run the installer again and I have it still won't work

    See:
    Trouble installing iTunes or QuickTime for Windows

  • Forms ERROR - FRM-18107: Failed to load the DE context for the module

    I have recently installed Oracle 10g (10.2.0) which is up and running fine (WinXP).
    I then installed Developer Suite 10g (10.1.2.0.2).
    When I try to open Forms I get the following error;
    'FRM-18107: Falied to load the DE context for the module'
    I have;
    DRIVE:oracle/product/10.2.0/oradb
    DRIVE:oracle/product/10.2.0/devsuite
    Can anyone advise?
    Many thanks in advance.

    Hello All,
    I would like to know more about the FRM-18107 error. I have tried getting rid of the error by altering my windows environment variable ORACLE_HOME, and going through numerous websites. But still no luck. I am about to de-install Forms 10g rel2 using the OUI. But I plan on leaving oracle 10g database on the system. Hope this will not cause any conflict. Also do I need to do anything in the registry after de-installation of forms 10g.Or is there any order of installation, i.e Do i need to install forms 10g before oracle 10g database.
    PLs also let me know if i will need to download any pathch for this to be sorted. But I didn't think so because during installation i noticed a few patches were being put to place as part of forms 10g rel2. Does it still needs a patch for it to work and get rid of the FRM-18107 error? If so, what is the name of the patch and how do i apply the patch. Pls let me know. Any comment on this will be well appreciated and valuable.
    Thanks.
    Cheers
    Aj
    Edited by: user9925154 on 25-Feb-2010 14:50
    Edited by: user9925154 on 25-Feb-2010 14:52
    Edited by: user9925154 on 25-Feb-2010 15:08

  • SSRS 2014 SharePoint integrated - getting error "Value does not fall within the expected range"

    Hi everyone,
    Note sure if this should be in the SharePoint forum instead, but here goes...
    I have got an SSRS report (SQL 2014) deployed to SharePoint 2013, and I am using a command line to call this report. The command line is...
    https://myserver/_vti_bin/reportserver?https://myserver/Reports/AdjustmentPlan.rdl&rs:Format=PDF&ParamActionGUID=B9B57C49-558B-471A-8BFD-2853673E8874
    This returns an error "Value does not fall within the expected range"
    If I remove the "&rs:Format=PDF" then the report appears on screen without problems...
    When I look in the sharepoint log files, I see the command line has changed to be 
    https://myserver/_vti_bin/reportserver?https://{machine_name}/Reports/AdjustmentPlan.rdl&rs:Format=PDF&ParamActionGUID=B9B57C49-558B-471A-8BFD-2853673E8874
    I'm not sure why this is happening, but if I can ensure the command line uses the correct SharePoint address, then I think this will fix the problem.
    Any questions or suggestions or solutions gratefully received.
    thanks
    David

    Thanks for the reply. I can probably explain easier than screenshots..
    The server name is "datacentre-cenet" for example
    But the address we use to access SharePoint is https://cenet (ie using the SharePoint Alternate Access mappings). So the command line to call the SSRS report uses the SharePoint name (CENET).
    But when I try to export SSRS to PDF, the command line get changed to
    https://datacentre-cenet which causes an error
    My thought is that somewhere SSRS is using the server name, rather than the correct URL which is
    https://cenet
    So if I could know where SSRS picks up the server name, I could configure that to fix this issue.
    Hope that's more clearer, thanks again,
    David

  • What are the security risks for opening port 80 on workstations?

    Hello all,
    in our environment, there is an application which open port 80 on workstations when installed, but it is not allowed on preimeter FW
    could you please advise what are the security risks for leaving port 80 opened on the workstations? or it is considered secure unless it is not allowed on the preimeter FW?
    thanks alot & regards

    Hi R.Naguib.
    The 80 port is open by default through the firewall on Windows system, it is used by a http protocol by a browser.
    As for the network or hardware Firewall settings, I suggest to turn to the network administrator for details.
    Regards
    Wade Liu
    TechNet Community Support

  • Urgent : Unable to maintain the Number ranges for Excise Groups

    Hi CIN experts............
    In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
    J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
    When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
    Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
    Can any one guide me something to resolving the issue ?
    regards
    Durga Ram

    Hello Nagaraju,
    Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
    I require to mention customizing path in my document.
    Puneet

  • How do I turn off hierarchical keywording in LR 5?  The interface preference for auto complete is off and I still get California United State Country.  I just want Caliofrnia.

    How do I turn off hierarchical key wording in Lightroom?  The Interface Preference for Auto Complete is already turned off, but I still get California>United States>North America when all I need is California.

    You need to be signed in order to reply to posts.
    One reason why you may see the hierarchical type format for the keywords is that you have keyword 'California' duplicated in your keyword list.
    Lightroom will display them with "< Parent-keywords" appended to the end.
    ie California < State < Country  and California < United States
    If you re-keyword the photos so they only use one version and then delete the duplicate keyword from your keyword list then it will display just "California".
    Bruce

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Hi, I have a Powermac with Mavericks and an iPhone 5S. I just recently switched from Verizon with unlimited downloads to limited of 500mb per month. I just purchased a Powerlink Outdoor Plus which is supposed to increase the network range for over 1 mile

    Hi, I have a Powermac with Mavericks and a recently purchased iPhone 5S. I just  switched from Verizon with unlimited downloads to limited of 500mb per month, so I purchased a Powerlink Outdoor Plus which is supposed to increase the network range for over 1 mile. I am still getting the same distance range with my iPhone with the Verizon router. I was wondering if I need to make adjustments in the Network Settings. Does anyone know about this particular subject?
    Thanks,
    Kevin

    Okay, I'll admit I don't know much about your configuration. A standard cellular package for a cellphone means you get your signal from a tower somewhere.  It won't have anything to do with a router which will be a WiFi connection from a router.  If you're talking about that, the Powerlink appears to be a directional antenna.  You should get better transmission/reception in the direction it is pointed, but likely worse in other directions than if you were using an omnidirectional antenna.  I presume you have it all hooked up correctly so the router is actually using the Powerlink antenna.
    By the way, those distance ratings are always exaggerated.  Maybe you'd get 1 mile if there was only dry air between you and the antenna and no trees, buildings, etc., and that would probably be just barely getting a signal.  You should see improvement but don't go to a coffeeshop 1 mile away in a city and expect to see your router.  We have a directional antenna on the roof of our house that looks like a satellite dish and I barely pick up the wireless service node a block away (with apartment buildings in between).  Thre may also be a difference between using it to send a signal and receiving a signal.  You might even need two, one at each end, to get 1 mile.

  • SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

    I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
    Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
    I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
    to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
    Let me know if anyone else has been down this path and what they have tried.

    Hi BillOlive,
    Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
    Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
    If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
    Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
    http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
    Hope this helps.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • Why do I get an error message when I try installing the free trial for Adobe Illustrator

    I'm trying to install the free trial for Adobe Illustrator and keep getting this message:
    The address wasn't understood
    Firefox doesn't know how to open this address, because one of the following protocols (aam) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address.
    Here's the url that shows up: aam://SAPCode=ILST?productVersion=18.0?passPhrase=YEmZQLlnqXSNN5J2MqT9nFJmjj9BuWZk+pf7OGV MZS6yZ0pJp1zX0dpiQotYMQvVL6Igm6fKG2AiVpcf4Qew9n8aUjJqM9Fz3NIDLs6XLj+jHTpWWAnsvHIxj7tGQUTyO j+4tUvNODu+kvpcXLAgtimRoEthDJXSnwKugdfBADY=
    Please help!!!

    Hola, espero hablen Español.
    Tengo el mismo problema, solo que no puedo instalar el Adobe Creative Cloud, y al intentar hacerlo me sale el mismo codigo:
    aam:?? // SAPCode = ILST ProductVersion = 18,0 frase de contraseña = YEmZQLlnqXSNN5J2MqT9nFJmjj9BuWZk + pf7OGV MZS6yZ0pJp1zX0dpiQotYMQvVL6Igm6fKG2AiVpcf4Qew9n8aUjJqM9Fz3NIDLs6XLj + jHTpWWAnsvHIxj7tGQUTyO j + + 4tUvNODu kvpcXLAgtimRoEthDJXSnwKugdfBADY =
    No puedo instalar ningun programa en modo de Prueba porque no me deja instalar el Creative Cloud.
    Ya intente con todos los navegadores diferentes a Safari. No funciona Chroome, No funciona Explorer, No funciona Mozilla Firefox
    Ya puse Restaurar Safari y Vaciar Cache pero tampoco a funcionado.
    Estoy realmente desesperada. Please Help Me

Maybe you are looking for

  • Adobe CS6 randomly asks for reactivation (Deployed using AAMEE 3.1)

    Hi All We've deployed Adobe CS6 Design and Web Premium using AAMEE 3.1 to about 500 workstation across our school campus.  However, we're having a really weird issue where either the licensing screen will randomly pop up asking for reactivation (7 da

  • Should I upgrade my HDD or better wait?

    so, what is the verdict on SSD drives with Snow Leopard? Are they fully supported? I want to buy an SSD to replace my 5400rpm drive but I don't know if they are supported with Snow Leopard. Particularly the issue with SSD getting slower (writing) ove

  • Deployment Error: DCs get activated but not deployed

    Hello All, I am new to NWDI. I did some code modifications in my DC. When i check in my activity, it gets activated, but not getting deployed. At first i was getting authentication problem, that is resolved now. Now i get this CMS log: 20140819135816

  • In ob28 step buttone is in deactive state

    Dear All, Can any one help me by telling the reason for the Step button in 0b28 screen is in deactive state. Beacuse I am not able to create validation. Help .... B.S.Rao

  • Variable vs hardcoded value in SQL query

    Hi Gurus, I have a SQL query inside a function that looks similar (i'm showing the "where" clause here only) to the below: WHERE ID = variable_id (by the way this two have exactly the same type, number(20)) and WHERE ID = 100 In the first option that