Error installing iTunes 10 on Windows 7 64 Bit

I upgraded to Windows 7 from XP since I changed laptop. I did tried to install iTunes on this new machine (win 7 64 bit Corei7 processor and 4G RAM) but during the installation when the status screen states "Publising Product Information", I'm getting the following error message:
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x800736FD."
Following this message, the installer reverses the installation process and after a 10-15 minute wait, a screen comes up that says the Itunes installation was complete. Obviously it wasn't but that is what the message says. When you close out of that message, Itunes tries to start and this message pops up:
"Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall itunes, then install iTunes again.
Error 2"
Any help will be very much appreciated

HRESULT:0x800736FD
It's rarer to see these on Windows 7 than it is on Vista. Somtimes they're a bit easier to deal with on 7, too.
First, head to Windows Update and see if you can update the PC. If you can, and you collect updates without any errors, try another iTunes install.
If you get errors installing Windows Updates, double click on the failed updates in your Update history to bring up a small window containing alphanumeric codes for the erros. Are they also 800736FDs, or are you getting other error codes?

Similar Messages

  • Error installing iTunes on Windows 7 64-bit

    Tried installing iTunes 9.2 for Windows 7 64-bit. "An error occured during the installation of assembly "Microsoft.VC80.CRT, version="8.0.50727.4053",type = "win32", publickey token ="1fc8b3b9a1e18e3b",process or Architecture ="x86". Please refer to help and support for more information. HRESULT: 0x8007054f.
    Ive tryed uninstalling and re installing. But i cant seem to get it to install. iTunes shows up in programs but its not installed correctly and wont open.

    HRESULT: 0x8007054f.
    On Windows 7 systems, one thing that might help with that code is installing the following security update:
    [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
    Does that install, or do you get a 1935 error citing the same HRESULT for the security update?
    If the update installs, try another iTunes uninstall/reinstall again. Do iTunes and Apple Application Support install properly this time?

  • Error installing iTunes for windows 8 64 bit

    I can't install iTunes 64 bit in my new laptop. Installatione give me this error:
    Error installing assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="win32 ".version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86". ..........
    Anyone can help me?
    Thank's
    Ben

    No, I have windows 8 64 bit installed,; however I tried also with 32 bit version, but when I start the installation, a massage appears saying that I'm trying to install a 32 bit version while I need to download and install 64 bit version! However thank's

  • Error installing itunes on windows xp a network error occurred

    i have trouble installing iTunes 10.2.2 on WIndows XP computer. Everytime i get message that a network error occurred. What is the trouble here? Any help is appreciated!

    Could you give the full text of your error message. This will help to workout excatly what the probelm is.

  • Error installing iTunes for Windows

    While installing iTunes 7.2 for Windows(XP), I encountered the Error: 1921.Service iPod Service (iPod Service) could not be stopped.
    I can not even uninstall the iTunes(4) that I already have on this computer, for the same reason.

    that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
    leave your ipod unplugged.
    download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
    iTunes 7.1.1.5 Installer
    shut down running applications and restart the PC.
    do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
    now start the install by doubleclicking the iTunesSetup.exe file.
    does the install go through properly this time?

  • ERROR installing itunes on Windows 8

    Was told by error message in iTunes to uninstall and reinstall iTunes.  Now iTunes will not install on my pc running Windows 8.  It errors out even after I shut down and tried again.

    I am having the same problem, please... installed and uninstalled many times, it says its up to date now, iphone is recognised, and when launching iTunes getting this message " This iphone cannot be used, because the required software is not installed. Run the iTunes installer  to remove iTunes. then install the 64-bit  version of Itunes."
    but it is 64-bit version!!!
    Ive got HP laptop with windows 8, it was working fine before it asked me to update. automatic update failed, I had to do it manually... please please any ideas?

  • TS3212 I get a side-by-side error when trying to install iTunes to Windows 7 64-bit???

    When trying to install iTunes to Windows 7 64-bit, I get a side-by-side error. Has anyone else seen this problem and were you able to resolve installing iTunes? If so, how did you resolve it?

    Hi
    Hope you are fine there!
    recommend that you attempt to resolve this issue by uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
    http://support.apple.com/kb/HT1923
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP:
    http://support.apple.com/kb/HT1925
    Take care!

  • I couldn't install itunes in windows 7, 64 bit, DLL not found, can any one assist

    Windows 7, 64 bit, unable to install. DLL missing, kindly assist.

    That's perfect, thanks.
    Although you're getting a different error message, try the procedure from the following user tip with that one:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • Why can't I install Itunes on windows vista 64 bit?

    Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails.  I get this complicated error mesage and then the installer rolls back and fails.

    I get this complicated error mesage and then the installer rolls back and fails.
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).

    I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193). 
    I have uninstalled and reinstalled a few times but with no luck.  Does anyone have another option?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the above steps haven't helped try installing:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes.
    Or roll back to:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    as appropriate.
    tt2

  • Trying to install itunes on windows vista and get the following error message:

    Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

    A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
    First, I'd strongly suggest setting up a system restore point.
    Now try the Scenario III treatment from the following document:
    Windows Update Error 80070424 in Vista
    Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
    Windows Update error 8000FFFF
    If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
    After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
    Now try another iTunes install. Does it go through without the 0x80070424 this time?

  • Unable to install itunes in windows 7 64 bit - hanging

    Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
    Also i am unable to uninstall Apple update software. Are these both related.
    Now how do i get the software installed( itunes installed in windows 7)

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

    I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Maybe you are looking for

  • Flip4Mac not working in safari 5

    hi guys, just noticed as i tried to listen to jazz fm that the flip4mac app thats streams wmas no longer works in safari 5, i think im on the latest version of flip4mac, anyone else got this problem or should i try reinstalling? Heres the link im try

  • What is the best solution to watch cable TV wirelessly on my MacBook Pro?

    Hi all. I know this isn't a direct AppleTV question but I thought I may find a solution in this forum. I just purchased a MacBook Pro and I want to watch cable TV wirelessly. I have an old Formac Studio TVR thats held up pretty well over the years wh

  • Difference between Webservice and RFC

    Dear Experts, We have an application to implement where the application will be called from other NON SAP technology. We got two solutions one is developing RFC's and calling it from other NON SAP Technology OR developing Webservice. Could any one pl

  • Dreamweaver on external drive

    I need advice on running DW installed on an external drive connected by usb to a desktop PC.  I have massive amounts of site data, image files etc. and need to travel. Is this practical or even possible?

  • Convert row into column

    I have table having below records. empno ename deptno 101 a 10 102 b 20 103 c 10 104 d 20 105 e 30 Normal Output using Group by. deptno count(*) 10 2 20 2 30 1 I want to display like below(rows into columns) Requiredl Output 10 20 30 2 2 1 Deptnos ar