Error: installing Java Add-in for Central instance
Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
Daniel
Hi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny
Similar Messages
-
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - PortugalHello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal -
Install JAVA add-in for ABAP problem.
Hello.
I tried to install java Add-in for ABAP on SAP NetWeaver 7.0 Support Release3.
(OS : AIX 5.3 , database : DB2)
The installation of phase "Central Service Instance (SCS) Java Add-in" and "Database instance Java Add-in" is complete
But in the last phase "Central Instance Java Add-in"
It show error
"TYPE=A<BR>STATE=<BR>INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server::<BR>CONFIGURATION="
at step "Configure System Landscape Directory".
(I read it from /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI/java.log)
I checked the Environment variable for Java and is set correctly.
I stoped the instance and restart the server ,Then tried to re-install but the same error still appear.
Any idea?
Thanks.
Regards.
- Chai -Thanks for your reply.
I have clear all remain shared memory after stop instance and database.
But it still show the same error.
sapinst_dev.log:
ERROR 2009-05-25 13:45:33.277 [sixxcstepexecute.cpp:951]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|1
3|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|
0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS:
See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from
server:: '.).
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service
SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In
for ABAP > IBM DB2 for Linux, UNIX, and Windows > Central System > Central Instance
Java Add-In ( Last error reported by the step :Java EE Engine configuratio
n error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION:
Unexpected end of file from server:: '.). You may now </p> <ul> <li> choose <i>Retry</i> t
o repeat the current step. </li> <li> choose <i>View Log</i> to get more information
about the error. </li> <li> stop the task and continue with it later. </
li> </ul> <p> Log files are written to /db2/sourceSAP/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB6/CENTRAL/CI.
</p> </body></html>
TRACE 2009-05-25 13:45:33.323 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
sapinst.log :
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log:
'IO EXCEPTION: Unexpected end of file from server:: '.
java.log:
TYPE=A<BR>STATE=<BR>INFO_SHORT=IO EXCEPTION:
Unexpected end of file from server::<BR>CONFIGURATION=
log from Log Browser
ERROR 2009-05-25 13:45:32.830
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Unexpected end of file from server:: '.
Please help.
Regards,
- Chai -
Edited by: ChaiChai2 on May 25, 2009 9:21 AM
Edited by: ChaiChai2 on May 25, 2009 9:22 AM
Edited by: ChaiChai2 on May 25, 2009 9:23 AM -
Install Java Add-in for ABAP - error
When I try to instal I got this error
WARNING[E] 2010-10-11 13:44:25.906
CJS-30109 <html> <head> </head> <body> The Java load in database ITM/ZEUS has already been configured.<br>SOLUTION: Remove the schema and load it with a new load before you run this installation. </body></html>
Where can remove this shema and how to load new load?
MirkoHi,
As per error log, Java schema which you are creating already exits in database. If Java Schema already there then why are you installing Java Add-in again ??
You can delete already existing Java Schema as below:
1. Log on as user ora<dbsid>.
2. Start sqlplus and connect to the database. Enter:
sqlplus /nolog
SQLPLUS>connect / as sysdba
3. Enter the following command to delete the database objects of the database schema:
SQLPLUS> drop user SAP<SCHEMA_ID>DB cascade;
4. Enter the following command to get the file name of the corresponding data file in the file system:
SQLPLUS> select file_name from dba_data_files where \
tablespace_name = 'PSAP<SCHEMA_ID>DB';
5. Enter the following command to delete the tablespace of the database schema:
SQLPLUS> drop tablespace PSAP<SCHEMA_ID>DB including contents;
6. Exit sqlplus:
SQLPLUS> exit
7. Delete the data file of tablespace PSAP<SCHEMA_ID>DB from the file system
Thanks
Sunny -
Install Java Add-In for existing ABAP == 'First MSCS Node' step fails
I am in the process of installing the Java Add-In for an existing ABAP System.
I am doing the High-Availability Installation Services.
There are seven (7) steps:
1. Central Services Instance (CSC) Java Add-In
2. First MSCS Node
3. Database Instance Java Add-In
4. Additional MSCS Node
5. Enqueue Replication Server
6. Central Instance Java Add-In
7. Dialog Instance
Step #1 was completed successfully.
Step #2 (First MSCS Node) keeps failing with the following warnings/error:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:38:04.928
Execution of the command "cluster.exe RESOURCE "SAP BWP 00 Service"" finished with return code 5007. Output:
Listing status for resource 'SAP BWP 00 Service':
Resource Group Node Status
System error 5007 has occurred (0x0000138f).
The cluster resource could not be found.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
WARNING 2011-11-02 07:40:29.085
Execution of the command "M:\usr\sap\BWP\ASCS00\exe\sapstartsrv.exe -u -q -s BWP -n 00" finished with return code 128. Output:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
ERROR 2011-11-02 07:40:29.210
FCO-00011 The step dCreateSecondNewSCSServiceWithVirtualHostName with step key |MSCS_A|windows|ind|ind|ind|0|0|SAPServices|windows|ind|ind|ind|9|0|dCreateSecondNewSCSServiceWithVirtualHostName was executed with status ERROR .This seems to be an issue with the clustering solution. Please, refer to the following article link:
http://support.microsoft.com/default.aspx?scid=kb;en-us;281796
See if that helps
Edited by: David Fitzgibbon on Nov 2, 2011 2:18 PM -
Erroe Message during installing Java Add-In for 2004s NetWeaver BI
Dear all:
I got the following error message when installing Java Add-in(Central Instance) for ABAP in Central system. It happened when the process came to "Start J2EE Engine".
Thank you very much
SzuFen
========================================================
INFO 2006-11-01 15:37:10 [iaxxcmsclient.cpp:112]
CIaMsgClient::CIaMsgClient(sap15, 3904)
Connect to message server (sap15/3904) succeeded.
INFO 2006-11-01 15:37:10 [iaxxcmsclient.cpp:122]
CIaMsgClient::~CIaMsgClient()
Disconnect from message server (sap15/3904) succeeded.
INFO 2006-11-01 15:37:11
CJSlibModule::writeInfo_impl()
State of instance BW7/DVEBMGS04 changed from ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: STARTING) to ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: STARTING).
ERROR 2006-11-01 15:37:11
CJSlibModule::writeError_impl()
CJS-30153 Java process server0 of instance BW7/DVEBMGS04 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2006-11-01 15:37:11
FCO-00011 The step startJava with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR .Hi,
On which OS it is?
Please let me know the Java version,is it something like this
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (<b>SAP</b> 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
It should be something like above,ie which should be specific for SAP.Otherwise you will experience similar issues.
Regards,
Cherry -
JAVA Add-in For Central ABAP Instance installation failure
Hi! I'm attempting to install a java add-in to an ABAP central instance in our sandbox for NW04 SR1. After sapinst is started, the process runs for approximately 2 minutes then fails. I've not been successful in determining exactly why. I have environment variables set for JAVA_HOME, SAPINST_JRE_HOME, and even a specific TEMP directory with gigs of available space.
The process "reads the configuration", "creates working directories", "changes to those working directories", "prepares for installation", then starts a child process which immediately crashes.
The message I first receive is: Connection to SAPinst broken, please correct and restart....
within AIX, the message states iauxsysex.c:297 child 2519168 has crashed. Executable directory......Contact Support.
also. iaextract.c.883: child has signaled an exec error
Thanks if you can offer assistance.
ShaneHi Shane,
This problem is nearly always to do with User Limits. Depending on the shell you are using you can view and change the limits using the limit or the ulimit command. If you change a limit the new value holds only for the shell and processes started in this shell. Hence if you change limits you have to do it in identically the same shell process from which you start sapinst.
If you are using csh or tcsh run limit to view all limits. The limits stacksize, datasize and memory are especially important. If they are not yet unlimited you should set them to unlimited using the commands
limit stacksize unlimited
limit datasize unlimited
limit memory unlimited
Please verify the result using
limit
If you are using ksh or bash run
ulimit -a
to view the limits and
ulimit -d unlimited
ulimit -s unlimited
ulimit -m unlimited
to set the limits.
Retry the SAPinst once you have set these ulimits -
Install Java Add-in for ABAP BW 3.5
I have a System on which we have 3 SAP Instances
2 Instances of SAP R/3 4.6D
1 instance of SAP BW 3.5
I want to add a New Java Instance for BW and it is giving error during the installtion that Collation needs to be CP850_BIN2
I will appreciate if anyone can help me.
Thanks
Jagraj DhillonHi Jagraj,
I guess you are using SQL server which was installed a while ago.
Please check SAP "Note 600027 - Installing the Corrected MS SQL Server Collation".
Good luck,
Victor -
Install BI Java Add-in for ABAP system error
Dear all:
I want to install Java Add-in for my ABAP system. My ABAP is SR3
Nw04s. During the CI install for Java Add-in steps: install software
unites, i got one error like this:
Error: Aborted: development
component 'caf/eu/gp/model/eap'/'sap.com'
Mar 17, 2009 2:28:29 PM Error: Aborted: development
component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'3', grouped by software component 'SAP-
EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'3':
Caught exception during application deployment from SAP J2EE Engine's
deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT
deployed. The Deploy Service returned the following error:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected
exception. java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception. Nested exception is:
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run
(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
Can you give me some advice about this? Thanks.My JDK 1.4.2_19 for IA64.thanks
-
Error while Installing the Java Add-In for an Existing ABAP System
Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran ChebroluHi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag -
WAS JAVA add-in for ABAP install error on AIX Oracle
Hi All
I am currently trying to install a 640 WAS JAVA add-in for ABAP on AIX 5.2 running oracle 9.2.0.6 for SAP 4.7 SR1.
I have successfully installed the ABAP stack, however, when I try to install the JAVA add-in, I get an error on step "Start SAP J2EE engine". The error is
INFO 2006-07-07 04:29:04
CJSlibModule::writeInfo_impl()
Output of /usr/sap/BWP/DVEBMGS00/j2ee/os_libs/jcmon 'pf=/sapmnt/BWP/profile/BWP_DVEBMGS00_rhubwp01' is written to the logfile jcmon.log.
INFO 2006-07-07 04:29:04
CJSlibModule::writeInfo_impl()
Execution of the command "/usr/sap/BWP/DVEBMGS00/j2ee/os_libs/jcmon 'pf=/sapmnt/BWP/profile/BWP_DVEBMGS00_rhubwp01'" finished with return code 0. Output: snipped
INFO 2006-07-07 04:29:04
CJSlibModule::writeInfo_impl()
J2EE Engine DVEBMGS00 of SAP system BWP did not come up after 827 seconds: waiting for another 20 seconds.
ERROR 2006-07-07 04:29:04
CJSlibModule::writeError_impl()
CJS-20058 J2EE Engine DVEBMGS00 of SAP system BWP did not reach state "Starting Applications" after 827 seconds: giving up.
I am new to JAVA, and I found some OSS notes (668606, 545422, and 943498) that might help, but they may as well be written in German for all I can make out what the notes are trying to say.
Any help would be appreciated.
Thanks
SamOooops, I forgot to paste the error messages
dev_jcmon
[Thr 1] *** ERROR => Can't attach to administration shared memory (rc=3) [jcmonxx_mt.c 219]
dev_jcontrol
[Thr 1] *** ERROR => invalid return code of process [bootstrap] (exitcode=-1) [jstartxx_mt. 1433]
[Thr 1] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-1)
[Thr 1] JControlCloseProgram: started (exitcode = -1)
[Thr 1] JControlCloseProgram: good bye... (exitcode=-1)
dev_bootstrap
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = 4294965248
=> Heap address = 0x0x1111d9fe0
=> Stack address = 0x1111b7a80
=> Stack low = 0x1111b5180
=> Stack high = 0xffffffffffff2b0
=> Stack Trace:
pthread_kill() at 0x900000000382c08
praise() at 0x90000000038261c
raise() at 0x900000000045890
abort() at 0x900000000052dc8
GetPropertiesMD() at 0x900000010639774
ciCreateJVM() at 0x9000000106d19f4
JNI_CreateJavaVM() at 0x90000001066529c
Unknown at 0x90000001062a810
JHVM_LoadJavaVM() at 0x1000918d4
JLaunchIStartFunc() at 0x10008bb14
pthreadbody() at 0x9000000003734ec
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
dev_disp
J2EE server info
start = TRUE
state = STARTED
pid = 5926962
argv[0] = /usr/sap/BWD/DVEBMGS84/j2ee/os_libs/jcontrol
argv[1] = jcontrol
argv[2] = pf=/usr/sap/BWD/SYS/profile/BWD_DVEBMGS84_mantas
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=60977
argv[5] = -DLISTEN_PORT=60978
argv[6] = -DSAPSYSTEM=84
argv[7] = -DSAPSYSTEMNAME=BWD
argv[8] = -DSAPMYNAME=mantas_BWD_84
argv[9] = -DSAPPROFILE=/usr/sap/BWD/SYS/profile/BWD_DVEBMGS84_mantas
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5926962)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
DpEnvCheckJ2ee: switch off j2ee start flag
DpHdlDeadWp: restart wp (pid=5791744) automatically
std_bootstrap.out
JVMCI200 - ERROR: User register saving is not enabled, Garbage Collection could be incorrect.
JVMCI200 - ERROR: because of this the JVM library is explicitly aborting the process
JVMCI200 - ERROR: You must either rebuild the executable using "-bM:UR"
JVMCI200 - ERROR: or run with "export LDR_CNTRL=U
Thanks
Sam -
Error in installing Java Add in
i am in the process of Installing EP in a Nw2004s system which was having AS-ABAP.
But EP was already installed before and it is not running.
I could not figure out the problem, so was planning to make a new installation
I selected the option Java ADd in for ABAP> MS SQL Server>central instance Java Add in
But while the program is executing i am getting the following error
<b>ERROR 2007-05-29 12:14:20
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG</b>
So when i see the securestoreinsert.log file i am getting the following message
<b>SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.</b>
Pls help me in thisHi,
Visit this link for the same problem and solution
1>A key/value pair with this key already exists in the store
Hope that helps -
Installing the Java Add-In for an existing abap system
Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
RegardsI followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution. -
Error Message with Installing Java Add in Component 640
We are trying to install a JAVA Add-in for ABAP using the Installation
Master CD 51031149. From SAPINST, SAP Netweaver '04 Support
release 1 > JAVA Add-in for ABAP > IBM DB2 UDB for iSeries >
Central System > JAVA Finalization, we are getting the error message
on the screen JAVA System - General Parameters: Cannot find the default
profile for the SAP system SDS (where we are trying to install the
addinat the default location "\ac4sap02.nmhg.com/sapmnt/SDS/profile/
DEFAULT.PFL. Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'.
From our install server @ '/usr/sap'SDS/SYS/profile' I have a
DEFAULT.PFL, DEFAULT.1.PFL, (2) SDS_DVEBMGS86_ac4sap files.
We are on an iSeries 570 4-way, installing SRM4.0, XI3.0 with SUS, CCM, TREX LAC and IPC.
Thanks
Chris Sugg
NACCO Inc.Hi Chris,
I am also getting the same error while installing the SAP Web AS 6.40 SR1 on IBM iSeries OS.
Error Message:"Cannot find the default profile for the SAP system <SID> at the default location /sapmnt/SDS/profile/
DEFAULT.PFL Make sure the installation step 'Preparation of Central
Instance Host' has run successfullyon the central instance host for the
SAP system SDSand that the profile directory is mounted at
'undefined/SDS/profile'."
I already apply Note: 789188
Can U Guide me the solution...
Regards -
NW04s (BI) JAVA Add-in for ABAP fails at step CONFIGURE EP
Hi All
We recently upgraded our NW04 BI 3.5 to NW04s BI 7.0 AS ABAP. We are now in the process of installing AS JAVA and UT BI JAVA, EP. Our platform is Unix (AIX) and database Oracle.
JAVA add-in is failing at the step "Configure Enterprise Portal" with the error message:
Installation is being performed using sapinst from DVD/CD D51031797.
SAP Netweaver 2004s SR1-> Addtional Software Life Cycle tasks -> Java
Add-in for ABAP -> Oracle -> Central System -> Central Instance Java
add-in.
Error:
ERROR 2007-05-09 00:26:04
CJS-00320 Portal Deployment Monitor Error: The Portal Configuration
Upgrade report file
(/usr/sap/B82/DVEBMGS82/SDM/../j2ee/cluster/server0/cf_installation.report) does not exist.<br>SOLUTION: Contact your local support center.
Do someone know how to resolve this problem?
Shashithanks
Maybe you are looking for
-
Firefox is fantastic except when I have a problem. I must be real stupid. I have sent questions about different issues in the past and I see I got a lot of help. Unfortunately I cannot read any results. That is why I quit Firefox for a while. I just
-
ALC-LCM-100-011 error for configuring LC to weblogic
When trying to configure LC to managed weblogic application server. I am seeing this error. I tried to change the port from 7001 to 8001(configured for managed server). I tried to put the IP of localhost and tried with 127.0.0.1 and no use. My weblog
-
Hi, Being very simplistic here. Taking a QT file and wanting to work with it in FCE3.5HD. Sending it thru conversion as a DV stream, I get picture but no sound. I am assuming there is not a way to do this and instead need mpeg streamclip or something
-
Mailbox Migration Failure for Exchange 2010 to 2010 latest SP and Rollup
I'm getting the following error for the last mailbox to migrate. This is Exchange 2010 to 2010 DB and no idea how to get pass this so far. It failed with 465 errors at 76%. Any ideas? I've check AD account to make sure permissions was okay. I was
-
Excellence examples and PhD in Dashboards / Business Intelligence Interface
Very quick query, I've been inundated with queries from UK&I members that have been interested specifically in the use of Excelsius as a means to raise the 'wow' factor when looking at Web Intelligence, BEX, ERP and even using Excel in classes but in