Error installing package on Linux using SDM.

Hello Everyone...
I am having an issue getting a package installed on RHEL using the SDM. The package I'm trying to install is BP SAP CRM 5.0 SP01. The error I'm getting is as follows (shortened for space and info reasons):
DeploymentActionException: The substitution of deployment parameter variables failed.The following variables could not be substituted because theyare not known by the SDM-Repository:com.sap.cm.shareTo fix this problem go to the SDM-Repository-View of the SDM GUIand define substitution values for these variables or correct thetype information. Please note these are not typos or gramatical errors. This is verbatim from the error message.
If I take a look at Deployment Parameter Substitutions ==> Public substitution variables, I do not see a com.sap.cm.share defined anywhere, but I have never had to define anything while installing this under Windows in the past with identical settings in the SDM GUI.
Is this just a simple matter of defining the variable, or could this be a permissions/config issue with Linux? If it does need defining, if anyone has any ideas what the variables should be would be greatly appreciated.
Thanks in advance!

Just an FYI, the answer to this was found over at Re: Troublshooting While Deploying CRM 5.0 BP on Enterprise Portal 7.0 A word of warning, the parameter variable needs to be listed as Com.sap.cm.share (just as it is listed in the post). I had been trying it as com.sap.cm.share, and it would not work when I tried to save it. Also, for those new to Linux, you need to use the / character, not the \ character as shown on the forum post if you are installing it under Linux.

Similar Messages

Errors installing web service to use dreamweaver extension

Portal Version: 10g
OS/Vers. Where Portal is Installed:: Linux AS 2.1
Errors installing web service to use dreamweaver extension
Recently I download the dreamweaver extension for portal, but when I try to install it several errors are raised... in the installation guide the next message appear:
This installation for this feature is an easy 3 step procedure.
1. Installing the Portal web service
2. Configuring the web service to work with your portal (one time administrative process)
3. Installing the PortalTemplates extension for Dreamweaver MX
well but when I try to run the 1 step everything goes wrong...
in the guide say:
# Transfer this file to the OC4J_HOME/j2ee/home directory of the OC4J
(please make sure that the OC4J is up and running)
# Use the following command to install the web service
java -jar admin.jar ormi://<oc4j_host>:<oc4j_ormi_port>
<username> <password>
-deploy -file portalTemplate.ear -deploymentName portalTemplate
here it's where I have some questions,
1. the ormi referers to the rmi ok (I think that), well then I go tho the iasconsole and search for the ports and is show:
home RMI 3202
OC4J_Portal RMI 3203
OC4J_BI_Forms RMI 3204
then I use the home-> port 3202
java -jar admin.jar ormi://myhost.midtierinstall.com:3202
ias_admin ias_midtier_admin_password -deploy -file portalTemplate.ear -deploymentName portalTemplate
but the following messages appear :
Error: Unable to find java:ServerAdministrator : lookup error:javax.naming.AuthenticationException invalid username/passwod for default (ias_admin).... and the error continue... but the problem is that the password works when I use the enterprise manager in that midtier console...
I want to know if I'm doing something wrong or how I should use this command to install that web service

The ormi is the rmi port in the OC4J. This coold be found in oc4j_home/j2ee/home/config/rmi.xml file. The default port is 23791.
Hope this helps,
Ramya

Error installing package on a phone

I have created a package(abc) in J2ME which has got 3 files.. main file is named "form" which uses the other two.. (CommMIDlet and Sender)... there are no build errors.. it works very well in emulator.. but while installing on Nokia N73 phone it did not open at all.. No error.. but it didnt open...
Next.. today i tried it on Nokia 5200.. it did launch and gave the following error
Security java/lang/SecurityException.MidletManager ERROR:illegal attempt to constuct abc.CommMidlet@d590dbc
I didnt understand this... Is this because i have used CommMIDlet from and inbuilt progarm(Network Demo) or is this something else..
plz help

Just an FYI, the answer to this was found over at Re: Troublshooting While Deploying CRM 5.0 BP on Enterprise Portal 7.0 A word of warning, the parameter variable needs to be listed as Com.sap.cm.share (just as it is listed in the post). I had been trying it as com.sap.cm.share, and it would not work when I tried to save it. Also, for those new to Linux, you need to use the / character, not the \ character as shown on the forum post if you are installing it under Linux.

Error installing package lme4

Hello,
I am trying to install an add-on package lme4 into the R distribution and got the following error:
* installing to library '/usr/lib/R/library'
* installing *source* package 'lme4' ...
** package 'lme4' successfully unpacked and MD5 sums checked
** libs
/systemr/port/AIX/comp/oraxlc.shx -F/systemr/port/AIX/comp/xlc.cfg -I/usr/lib/R/include -DNDEBUG -I/systemr/port/AIX/include -I/opt/freeware/include -I/usr/linux/include -I/usr/local/include -I/usr/lpp/X11/include/X11 -I"/usr/lib/R/library/Matrix/include" -I"/usr/lib/R/library/stats/include" -O -qstrict -qnoldbl128 -c init.c -o init.o
/bin/sh: /systemr/port/AIX/comp/oraxlc.shx: not found.
make: 1254-004 The error code from the last command is 127.
The command I am using is:
R CMD INSTALL lme4_0.999999-2.tar.gz
I am pretty sure that the server does not have XLC installed; neither does the directory /systemr. The compiler I have is gcc. I tried to set the environment variable CC to the right gcc value but R keeps getting me the same problem. Is there a way in R to specify the compiler?
Any help is highly appreciated.

The trick worked ... Now R can find gcc as the compiler. Many thanks!
I also found that the configuration file for package installation is Makeconf under /usr/lib/R/etc. It seems to me that people can modify that file to use the right compiler/compiler options.
Version of R distribution package: 2.15.2
Version of AIX: 6
Hope this helps

Error installing jmf-2_1_1e-linux-i586.bin

h3. Hello,
h3.
I'm trying to install jmf-2_1_1e-linux-i586.bin on a Linux(centos 5.1) system. I get the results at the end of this post after accepting the license agreement. I haven't found anything on the web or the bug database that has been helpful. I'm really at my wits end and could use a helping hand.
h3.
Thanks in advance.
Do you agree to the above license terms? [yes or no]
y
Permit recording from an applet? (see readme.html) [yes or no]
y
Permit writing local files from an applet? (recommend no, see readme.html) [yes or no]
n
Unpacking...
tail: cannot open `+309' for reading: No such file or directory
Extracting...
./install.sfx.3639: line 1: ==: No such file or directory
./install.sfx.3639: line 3: syntax error neUQU599ù;···ÿrþÑÑÑ¢_Âò«KK)C{<>úú<<¿è
QQRLÙÜÌLÅ^sfx.36 88ø$èåõÕ®¢¬,àöè´iÑÒÒÒV~ámn.à7w^ÝÂÆ,;M¢`ÞòA$D¨®¨¨ @ ÉºÎwA'
--root@localhost lib--# PuTTYEdited by: eran_cantor on Jul 17, 2008 2:01 PM
Edited by: eran_cantor on Jul 17, 2008 2:02 PM
Edited by: eran_cantor on Jul 17, 2008 2:03 PM

Hey Eran,
I guess, you can find the solution to your problem here:
[http://forum.ubuntuusers.de/topic/jmf-java-media-framework/#post-1806940]
It works well on Ubuntu, but since the error on Ubuntu looks exactly the same as on Centos, I think it should work for you as well.
Cheers,
Georg

Error Installing Packaged Applications - Apex 5

Hi Folks:
I installed APEX 5 successfully. Everything seems to be running fine except I'm unable to install packaged applications.
I get a screen that looks like the following when trying to install a package application:
The text in the dropdowns for the errors begins with:
Error
The packaged application installed. However, installation of database objects and seed data has failed.
Install Summary
Script Name Status Statements Successful Statements with Errors Total Statements
Framework Package Specification Success 1 0 1
Framework Package Body Errors 0 1 1
eba_dp_ui spec Success 1 0 1
eba_dp_ui body Errors 0 1 1
Missing Indexes Errors 0 7 7
Filter Search Spec Errors 0 1 1
Filter Search Body Errors 0 1 1
eba_dp_data_access body Errors 0 1 1
eba_dp_dashboard body Errors 0 1 1
eba_dp_demo_data spec & body Errors 1 1 2
Report Total:   3 14 17
1 - 10
Errors
Framework Package Body
CREATE OR REPLACE PACKAGE BODY "EBA_DP_FW" as
    function conv_txt_html (
        p_txt_message in varchar2 )
        return varchar2
    is
        l_html_message   varchar2(32767) default p_txt_message;
        l_temp_url varchar2(32767) := null;
        l_length number;
    begin
        l_html_message := replace(l_html_message, chr(10), '<br />');
        l_html_message := replace(l_html_message, chr(13), null);
        return l_html_message;
    end conv_txt_html;
    function conv_urls_links (
        p_string in varchar2 )
        return varchar2
    is
        l_string   varchar2(32767) default p_string;
It then includes a lot more create, etc. statements that failed.
I wonder if it is some kind of permissions issue? I ended up running @apxremov.sql   and reinstalled apex 5 again after I couldn't get the package apps to work the first time but that didn't fix anything. I have attached a text file that has all the code from the error message.
The database I installed to is an Oracle 12c Enterprise database.
It had Oracle Apex 4.2.6 installed on it with many packaged apps (not really using them, just trialing them till 5 came out). I ran @apxremov.sql before installing Apex 5.
Any help or ideas are appreciated.
Thanks,
Matthew Friend

Matthew,
Looking at the error file, it appears that APEX is trying to "upgrade" an existing Data Reporter instance rather than do a fresh install. It's possible (I haven't checked the code) that apexremov.sql doesn't run the packaged applications through their deinstall process, and so their supporting objects may still be present within your schema. I'd suggest removing any objects (especially tables & packages) with a name like 'EBA_DP_%' from your parsing schema, and then trying the install again.
Regards,
-D.

Error installing Essbase in Linux machine

Hi,
I am getting the following error while installing Essbase in Linux server.
WARNING: error intantiating 'oracle.core.ojdl.logging.LoggingConfiguration' referenced by java.util.logging.config.class, class not found
java.lang.ClassNotFoundException: oracle.core.ojdl.Logging.LoggingConfiguration not found
The steps followed for the installation are as follows:
1. Copied all the required softwares in Linux server in the "EPM_Linux" directory.
2. I typed the following command in Linux Window
[home/epm_linux]>./installTool.sh
After typing the above command, I got the above error message.
Java version in Linux server is : 1.4.2
Linux version is : Red Hat 4.1.2-48
Did anyone face this issue? Please help in the resolution.

thanks for ur reply .
I am new to linux , so pls clarify the following :
1. How to check Path and Jar files.
2. How to set Java Environtment variable .
Also see the below error msg....
[home/oraobidb/epm_linux]>./installTool.sh
WARNING: error instantiating 'oracle.core.ojdl.logging.LoggingConfiguration' referenced by java.util.logging.config.class, class not found
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.LoggingConfiguration not found
<<No stacktrace available>>
Exception in thread "main" java.lang.ClassFormatError: com.hyperion.install.wizard.splash.Splasher (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at gnu.java.lang.MainThread.run(libgcj.so.7rh)
Regards .
Edited by: 937268 on Jun 4, 2012 5:01 AM
Edited by: 937268 on Jun 6, 2012 12:01 PM

Error installing package from AUR. /usr/lib64 exists in filesystem

I installed the package zoneminder-xinetd 1.27.0-1 using the instruction on the wiki, the installation finished successfully. then I realized that the package was outdated, so I uninstalled it using "sudo pacman -R zoneminder-xinetd", manually edit the files .AURINFO and PKGBUILD to get the new version, compiled successfully using 'makepkg -s' but when I'm try to install it(sudo pacman -U zoneminder-xinetd-1.28.0-1-x86_64.pkg.tar.xz) I got this error:
error: failed to commit transaction (conflicting files)
zoneminder-xinetd: /usr/lib64 exists in filesystem
Errors occurred, no packages were upgraded.
I also tried to install this other package https://aur.archlinux.org/packages/zoneminder after removing some unwanted dependencies but i get the same error.

fsckd wrote:Pacman 4.2 handles symlinks differently than past versions of pacman. Allan's blog has a good description (see the section "Directory Symlink Handling") http://allanmcrae.com/2014/12/pacman-4-2-released/. I suggest you inform the maintainers of those packages so that they may update the PKGBUILDs.
Thanks for the quick answer.
I solved this issue by adding "-DCMAKE_INSTALL_LIBDIR=/lib" to the cmake in the PKGBUILD. The mantainer of the zoneminder package solved this already by adding "-DZM_PERL_SUBPREFIX=/lib/perl5 \".
Also, I adopted the zoneminder-xinetd package .

Installing oracle on Linux using the SAP version of oracle software

Hello All,
I am trying to install 32bit oracle software on Linux 32 bit os using the SAP version of Oracle Install Software downloaded from marketplace. I have downloaded the required exe and rar files and unpacked them on my PC. The unpacked folder is uploaded in bin mode to the respective server under a common mountpoint. In the folder i have 4 .SAR files with other label files etc. I want to unarchive these .SAR files to get the runInstaller but running in to issues.
Here are the steps I tried:
1. I copied the SAPCAR exe from exe directory and tried to unpack the 4 .SAR files but got permission error. All these 4 .SAR files are owned by ora<sid> user id. I tried to do all these under root user still it fails.
ora<sid>@xxxyysapdbXX:/sapdata//Oracle32/51031674> SAPCAR -xvf OR110232.SAR
-bash: ./SAPCAR: cannot execute binary file
what am i missing?
Any help is greatly appreciated.

If you have a 32bit OS then you need to use the 32bit binaries of SAPCAR - yes.
And:
Usually those SAR files are unpacked by the installation program sapinst, why do you unpack them manually?
Markus

Error while Deploying JAR file using SDM in EP system

Hi,
As per below mention URL for Installing and Deploying the Enrichment Controller ,I am confuguring MDM Enrichment Controller in EP system
http://help.sap.com/saphelp_nwmdm71/helpdata/en/44/aa411ce9d57454e10000000a11466f/frameset.htm
So, as per the Help in Step 7, its mention to deploy a specific adapter for the external enrichment service provider i.e JAR file.
And when i am trying to deploy the *.jar file , i am getting this message in SDM:
Summary:
========
There were 1 archives selected.
0 archives successfully loaded.
   Loading of 1 archives failed.
Details:
========
1) Error loading archive
    C:\Documents and Settings\<SDMUserID>.<EPsystemHostName>\Desktop\Adapter\MDMEnrichmentAdapter.jar
    (server side name is: C:\usr\sap\SID\JC00\SDM\program\temp\MDMEnrichmentAdapter.jar)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
there is no deployment descriptor declared
(C:\usr\sap\SID\JC00\SDM\program\temp\MDMEnrichmentAdapter.jar)
So, kindly guide me how to deploy this jar file on EP syetm or if any settings is required.
Regards;
Hanif
Edited by: Shaikh Hanif on Nov 22, 2010 2:47 PM

Hanif,
Check this wiki's,
http://wiki.sdn.sap.com/wiki/display/JSTSG/(JSTSG)(Deploy)Problems-P29
http://wiki.sdn.sap.com/wiki/display/JSTSG/(GP)CannotDeployGPContent-WrongManifestFileAttributes
Good Luck!
Sandeep Tudumu

Error Installing Oracle on Linux

Hello All,
I'm getting a tampering error while installing Oracle on a fresh linuxbox.
When I attempt to create a new DB by dbca I get the following error traced by the tool:
Oct 31, 2006 12:37:24 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 2
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to Europe/Vatican
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle_dboracle not found.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /oracle/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/dboracle/emConfig.log for more details.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:565)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:177)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:146)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
The first strange thing is the message "CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle_dboracle not found." that, I have checked, exists (and is a directory).
After this first message I get a finally ERROR message that states it's cannot able to start the dbconsole.
Where I have to point my attention?
This is a very first installation on a totally clean box.
Regards

The database has been successfully installed.
I get errors, sistematically, when I attempt to create a new db using dbca.
The error occurs during the last step of the db creation.
which follows is the dump of the relevant part of the emConfig.log where the error is enlisted:
Oct 31, 2006 12:37:24 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 2
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to Europe/Vatican
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle.dev.nexus_dboracle not found.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /oracle/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/dboracle/emConfig.log for more details.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:565)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:177)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:146)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
     at java.lang.Thread.run(Thread.java:534)

Error installing 10g on linux

When i trying install oracle on Fedora 10 I found following error..........._
[oracle@localhost tmp]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-07-04_12-45-23AM. Please wait ...[oracle@localhost tmp]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-07-04_12-45-23AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
How can i solved this?

Wow...this seems to be a common problem in the last few days for many folks.
A simple search on these forums would have revealed many posts related to this that suggests:
Verify all the required rpm's are installed including libXp.

Errors Installing Portal Components using 9iAS Enterprise on 8.1.7 SE

We are getting an error installing the Portal Components using
9iAS Enterprise on a 8.1.7 SE database. The log indicates that
the error is:
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted.
While I know that Function-based indexes are not supported in SE
this should not prevent the installation of Portal.
Does anyone have any suggestions?
Thx, Paul

Its also working in our case where we have used 8.1.7 Enterprise Edition. We installed 9iAS 1.0.2.0 on NT. So if you have any issues regarding this then let me know.

Installed package

Hi,
How to find installed package in linux and its path.where the apache is located in linux.
[root@server2 /]# httpd -v
Server version: Apache/2.0.52 > where this information stored in linux
Server built: Aug 31 2005 10:47:52
how to find the location of Apache/2.0.52 i tried
[root@server2 /]# which Apache/2.0.52
/usr/bin/which: no 2.0.52 in (./Apache)
[root@server2 /]# which Apache
/usr/bin/which: no Apache in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin)
[root@server2 /]#
Edited by: user3266490 on Jul 8, 2009 6:40 AM
Edited by: user3266490 on Jul 8, 2009 7:42 AM
Edited by: user3266490 on Jul 8, 2009 7:43 AM

I do not understand your question.
the version of the apache server can be listed with httpd -vthe location of the apache server can be listed with which httpdthe rpm package which contains the httpd executable can be listed with rpm -qf `which httpd`

Explicitly installed packages

How do I list what packages I have that are explicitly installed not as dependencies for other packages?
pacman -Qe doesn't help since it only lists ones that where installed as dependencies.
Last edited by hussam (2007-06-08 00:40:30)

script : http://bbs.archlinux.org/viewtopic.php? … 08#p251008
bug report : http://bugs.archlinux.org/task/7343
Afaik, pacman -Qe never listed all explictly installed packages.
It used to list orphans, ie package not required by any others.
Then, in pacman 2.9 (I just checked :d), it was restricted to explictly installed packages. I'm not sure why.
But it never displayed all explicitly installed packages, the e wasn't for explicit.
In pacman 3, it now lists packages not required by any others, that were _not_ installed explicitly,
which is much more interesting imo, since it's packages that are generally safe to remove.

Error installing package on Linux using SDM.

Similar Messages

Maybe you are looking for