Error is coming when executing the report in bex

hai experts,
any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
mahesh

you default method is WEB so its useing URl to open the results, change the setting to use analyzer(XLS) and update your GUI Front End patch.

Similar Messages

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Error when unning the report in bex.

Hi All
I have data in multi provider , based on multi provider there is some reports is there,
when i run one report it run sucess fully
but while running the another report it gives below warning
warning Hierarchy 0RGEH in version 000 was not found for key data 20090224.
when i click ok then it give below error message
Abort system error in program Cl_Rs_Base and form Get_Max_Timestmp-01-
Abort system error in program saplrrko and form INITIALIZE_DATA_ACCESS-01
any body know about this problem plz help me

Hi,
the message implies that the hierarchy from ur info object 0RGEH is not in active state.
please check whether u have the hierarchy loaded correctly in the back end for this info object, if not load the hierarchy and then try to execute the report.
hope it helps.
Regards,
Rathy

Performance Problem when executing the report for the first time.

Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.

Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran.

'Query has not yet calculated' When executing BW report in Bex

Hi, all
There is message 'Query has not yet calculated' when execucting BW report in BEx.
what's the reason? How to solve this issue?
however, when I change the filter to one or several employee number such as employee information report, there will be one or several records in the report.
Anyone can help me?Thanks very mcuh.
Carina

ok.
While using exception aggregation, you need to give a reference characteristics. You might have given 0calday for the same for 0ANSALARY ( SUM LAS ) and your infoprovider does not have 0calday and the report is unable to calculate the result based on 0calday.
This will obviously throw and error but you will be able to see the result. But the result will not calculate last sum for 0ansalary correctly.
For this, please check the infoprovider design. You can use reference character other than 0calday and make sure that, the reference time characteristics is present in your infoprovider.
Cheers
Chanda

Crystal reports and SAP BI--------BAPI error when executing the report

Hi All,
I am getting a problem accessing the data from the SAP BI system into the crystal reports.I created a report in CR2008 on a query built in SAP BI.When I execute this query,I am getting the following error.
Database Connection Error:'BAPI Error #:0
Error Occured when starting the parser:timeout during allocate / CPIC-CALL:'ThSAPCMRCV"
CAN ANYBODY HELP ME OUT Please.
Thanks,
Kumar
Edited by: Madan Koka on Dec 15, 2008 5:47 PM

Hi,
I have the same problem. I can create report in Crystal Reports on a query but can`t get data from BW.
Thx in advance for help
Jacek

Vaue of sy-tcode when executing the report program in the background

Hello All,
To test and find out the value of sy-tcode when the report program is exectued in the background. I have done the below steps.
1. created a report program with the code given below.
Select option was just defiend to get the selection screen. it is of no use.
Select-options: s_name for sy-uname.
Write:/ sy-uname,sy-tcode.
2. then I created a transaction for the program to identify whether the value of sy-tcode explicitly.
3. Then I launched the transaction and in the selection screen of the program I selected the option of executing the program in the backgroung and i process the job immediately.
4 . In the spool I am able to see the correct sy-uname value but not the sy-tcode.
Where as if i am executing it in the foregroung it is giving the correct value of sy-uname and sy-tcode.
Can anybody provide me the reason as to why this is happening . that is in the backgound mode the value of sy-tcode is getting cleared.
Thanks,
Mohit

Hello,
As they say it is an SAP standard behavior, you can "hardcode" the transaction itself into the ABAP code...
ie:
if sy-batch eq 'X' "->IT MEANS THAT IT IS A BACKGROUND JOB.
w_tcode = 'Z*****'.
else.
endif.
bYE!!
Gabriel P.-

Error when executing the report

Hi Friends,
I have Built a query and when i run i get the selection screen and when i enter value and execute i am getting the following error "Not authorised to run report".
Can anyone please let me know what should i do to get this running.
Thanks in Adv
BN

If there is a anuthrization object in the infoprovider on which report was build, make sure you have the * access for that infoobjects.
If you are using BI 7 go to t code rsecadmin and check what are infoobject available which is authrization enebled
and then check they are used in you infoprovider. and u have that access or not.
If you dont have the access create one authrization object for that object and ask basis to assign the authrizaion object to S_RS_AUTH

Error when Executing the Report - No Authorization for Multiprovider

Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the my ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman.. This is Emergency for me..

Ok,
Pick up a test user (or your user) and go to transaction su01.
Check the roles that are assigned.
Double-click in each one and choose display. Go to tab authorizations and click on the glasses icon of displaying authorizations data. Then go to menu->Utilities->Technical names On.
You should see the tree with the node name Business Information Warehouse (technical name RS), if you don't see this in this role, than the issue it's not in this role, go back to su01 and check another role the same process until you find this node.
If you expand this node you'll see another nodes, one of them is called Data Warehousing Workbench - InfoCube (technical name S_RS_ICUBE). And you probably can't find another node called Data Warehousing Workbench - MultiProvider (technical name S_RS_MPRO), this is the new node you want.
In the node S_RS_ICUBE expand it and you'll see the authorizations given to InfoCubes with activity, InfoArea and InfoCube. In the older system BW 3.x this object was used to give access to InfoCubes, but also to MultiCubes. So you have to find the role that has this object with InfoCube with the value of MultiCube or with all values, for example, you could have this node in your role with the following values:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFIAA_C11, ZFIAA_C13, ZFIAA_M02
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    *
or with:
Activity                       03
InfoCube Subobject     DATA
InfoArea                     ZFI*
InfoCube                    ZFI*
Something like that. The first example give access to specific InfoCubes and one MultiCube, the second one you'll have all the InfoCubes and MultiCubes inside the InfoArea started with name ZFI and the third one you'll have all InfoCubes and all MultiCubes started with name ZFI that belongs to the InfoArea started with name ZFI also.
Got the picture?
So in BI 7 MultiCubes are now controlled by the new object S_RS_MPRO instead of the older object S_RS_ICUBE. What you should do is go to transaction pfcg and insert the role you want to include (or change these new values, i.e., the role that has the access to the MultiCube values inside the object S_RS_ICUBE which the query is built on) the new object S_RS_MPRO and click on change. Go to tab authorizations and click on change authorization data. Then click on manually (ctrlshiftF9) and insert the object S_RS_MPRO. Inside this new object you should insert the authorization data for accessing your multiproviders.
In the 3 examples above you should create these 3 entries:
Activity                          03
InfoArea                         ZFI*
MultiProvider                  ZFIAA_M02
MultiProvider Subobject DATA
or with:
Activity                          03
InfoArea                        ZFI*
MultiProvider                  *
MultiProvider Subobject DATA
or with:
Activity                         03
InfoArea                        ZFI*
MultiProvider                 ZFI*
MultiProvider Subobject DATA
Therefore you continue to have the object S_RS_ICUBE to control only the InfoProviders plus the new object S_RS_MPRO to control the MultiProviders.
Now generate the profile(s), save the role(s) and test it again!
Diogo.

Background Job get Cancelled when executing the report. Reason?

Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Viji

hi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen

ORA-00904 invalid IDENTIFIER IS COMING WHEN EXECUTING THE MIDDLE SCALAR

SELECT (SELECT tran_descn FROM TRANCODEINFO WHERE tran_code = a.txn_type
) AS txn_type, a.tot,
SELECT COUNT () FROM (*_
SELECT f.txn_auth_id FROM FINGERTXNLOG f WHERE f.bank_id = '515' AND f.txn_date_time BETWEEN_
TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')_
AND f.txn_status = 'C' AND f.txn_type = 'BV' AND f.txn_type = a.txn_type AND f.terminal_id = NVL('',f.terminal_id)_
*) a*
AS succ_records FROM (
SELECT f.txn_type , COUNT (f.txn_auth_id) AS tot FROM FINGERTXNLOG f WHERE f.bank_id = '515' AND f.txn_date_time BETWEEN
TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
AND f.txn_type = 'BV' AND f.terminal_id = NVL('',f.terminal_id) GROUP BY f.txn_type
) a

formatted the query, removed some underscores and commented some unnecessary *
Is this is what you want ?
SELECT
          SELECT
               tran_descn
          FROM
               TRANCODEINFO
          WHERE
               tran_code = a.txn_type
     ) AS txn_type,
     a.tot,
          SELECT
               COUNT (*)
          FROM
                    SELECT
                         f.txn_auth_id
                    FROM
                         FINGERTXNLOG f
                    WHERE
                         f.bank_id = '515'
                    AND f.txn_date_time BETWEEN TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
                    AND f.txn_status = 'C'
                    AND f.txn_type    = 'BV'
                    AND f.txn_type    = a.txn_type
                    AND f.terminal_id = NVL('',f.terminal_id)
               a
     ) AS succ_records
FROM
          SELECT
               f.txn_type ,
               COUNT (f.txn_auth_id) AS tot
          FROM
               FINGERTXNLOG f
          WHERE
               f.bank_id = '515'
          AND f.txn_date_time BETWEEN TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
          AND f.txn_type    = 'BV'
          AND f.terminal_id = NVL('',f.terminal_id)
          GROUP BY
               f.txn_type
     a

SSRS Error while executing the report

Hi,
dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
URL.
Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
i can see the above log in reporting services log files, does anyone having the idea about this?
Thanks
Veera
Thanks
Veera

Hi Veera,
According to your description, when you run the report, you get XMLDPException and 500 error.
In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Exclude certain objects in OM when using the report RHSTRU00

Hi,
I'd like to inquire if there is a way to exclude certain objects from appearing in RHSTRU00? For example,
Organization XYZ contains 3 org units:
Organization A - contains Position A - Employee A
Organization B - contains Position B - Employee B
Organization C - contains Position c - Employee C
Organization XYZ - contains Position XYZ - Employee XYZ
When using the eval path O-S-P with root object Organization XYZ, is there a way to exclude Position XYZ - Employee XYZ from the report output?
Thanks!

Hi Kristine Tan ,
Yes, You can exclude the Position when executing the Report RHSTRU00 using Evaluation Path O-S-P.
Click on "Change Structure Conditions" Push button and give the following under structure conditions (Object Filter)
Check Object Type - Root Object Type - Root Object ID - Evaluation Path - Status
S - O - XXXXXXX - O-S-P - 1
Click on Continue.
Then execute. You can see the Positions are not displayed in the report.
Regards
Venu
Edited by: venu gopal on Feb 28, 2011 3:50 PM
Edited by: venu gopal on Feb 28, 2011 3:51 PM
Edited by: venu gopal on Feb 28, 2011 3:52 PM

Error coming while executing the query in analyzer

HI,
Any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
mahesh

Hi ,
It happens because of the improper connectivity and configuration.In case of Web Reports so many pop ups will appear because of improper config..As long as you are getting the reports its ok,,,Should be taken care of Basis
Regards
Siva

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error is coming when executing the report in bex

Similar Messages

Maybe you are looking for