Error "Job already started" when calling a adobe form in Z function module

Hi All,
I have a error when calling a adobe form in a custom function module.
I am using FP_FUNCTION_MODULE_NAME to get the adobe form function module and then i am using FP_JOB_OPEN function module to control the printing parameters such as no print preview or no dialog ..etc.. I dont have any exceptions during the call of FP_JOB_OPEN function module ..
Later I am calling my function module which was generated for the adobe form and i am getting the error called " JOB ALREADY STARTED".
I tried executing the same function module in se37 and the PDF form output was generated, and also by commenting FP_JOB_OPEN function module the PDF form output was generated.
But i need the FP_JOB_OPEN function module to control the output based on the output type which triggers the form output such as the medium from nast record which says print or email or fax.. etc
Please let me know how to handling this error.

Just as a followup note. If you are testing a function module from SE37 and the test button you will get a value in SY-CPROG. You must override this value for everything to work.
If you override the value of SY-CPROG with the main program that will be calling the function module you have no problem.
John W.

Similar Messages

Is it possible to call a adobe form inside a function module?

Hi gurus,
i am trying to generate the pdf data source inside a custom function module,
the function module will call the FUNCTION 'FP_JOB_OPEN' , then call the function module of the pdf interface. then get the pdf data back and return.
but at run time i got the error message:
FPRUNX101, the job already started.
then the program stopped.
i checked the service market place, there is a note for that:858325 Message "Job already started" when you display PDF forms .
according to the notes,it seems that it's only possible to call the pdf generated function module in a program.
my question is , is there a way to call that in a funciton module?
best regards.
Jun
the note states that:
Reason and Prerequisites
At runtime, a PDF-based form is called using a generated function module. If you use the new interface, it is necessary to set the function modules FP_JOB_OPEN and FP_JOB_CLOSE as control structures with one or several generated function modules. In order for the single test from Transaction SFP to work simultaneously, however, the system checks for the test environment of Transaction SE37 (in which the test ultimately runs) in the single test. In this case, the function modules FP_JOB_OPEN or FP_JOB_CLOSE are called automatically.
If you then test a function module that calls a PDF based form and therefore calls the function module FP_JOB_OPEN itself, this leads to the error message mentioned above.
Solution
The test should be carried out using a program that in turn calls the function module to be tested.

sorry, i found out the reason.
the fm can not test direct in se37, it should be wrapped by a program.
br.
zj

Problem using RFC to call an adobe form to create pdf file........

Hi,
   I have an RFC that calls an adobe form to display the pdf output back in a bsp page...the RFC fails at the call to the adobe form (next call after after getting the form name) ...while debugging it looks like within this call it is trying to call fpcomp_job_open and failing on the call check_job_open ...
The code in my RFC looks like this....
DATA:
    gs_outputparams TYPE sfpoutputparams,
    fn_name           TYPE rs38l_fnam,
    fp_docparams      TYPE sfpdocparams,
    fp_formoutput     TYPE fpformoutput,
    frm_result        TYPE sfpjoboutput,
    lv_form           TYPE fpname.
DATA: l_pdf_xstring TYPE xstring,
       l_pdf_len      TYPE i.
lv_form = 'ZHR_ASSESSMENT_FORM'.
Start formrocessing - OPEN spool job to send to printer
gs_outputparams-getpdf = 'X'.
call function 'FP_JOB_OPEN'
    changing
      ie_outputparams = gs_outputparams
    exceptions
      others          = 1.
IF sy-subrc <> 0.
*//    RAISE FP Open Error.
      exit.
ENDIF.
Get name of the generated function module for the form
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = lv_form
    IMPORTING
      e_funcname = fn_name.
IF sy-subrc <> 0.
*//    RAISE FP Get Form Module Name Error.
        exit.
ENDIF.
Call the Adobe Form
CALL FUNCTION fn_name
EXPORTING
      /1bcdwb/docparams = fp_docparams
      gv_appraisal_id = gv_appraisal_id
IMPORTING
     /1bcdwb/formoutput = fp_formoutput
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      others             = 4.
IF sy-subrc <> 0.
*//    RAISE Call Form Module Error.
        perform f_build_message using 'E'
                                  'ZEXT'
                                  012
                            changing return.
       exit.
ENDIF.
End from processing - Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
    IMPORTING
      e_result       = frm_result
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
*//    RAISE FP Close Error.
       exit.
ENDIF.
form = fp_formoutput-pdf.
Thanks,
Venkatesh

what is the solution for this problem? I have the same problem. I get sy-subrc = 1 after CALL FUNCTION 'FPCOMP_JOB_OPEN'.
If I look more in detail I see that "Perform check_job_open" is creating the problem:
FORM check_job_open.
IF fpstat-is_opened = c_true. (--> exactly here is the problem. This condition is true so the program is terminated.)
    PERFORM reset_status.
    MESSAGE ID 'FPRUNX' TYPE 'E' NUMBER '101' RAISING usage_error.
ENDIF.
fpstat-is_opened = c_true.
fpstat-is_started = c_false.
ENDFORM.
Does somebody know why my job is open and what is the solution to have the job closed at the beginning of my processing?
Thanks in advance.

Error when activate the Adobe forms

Hi,
I am getting the below error message when activate the adobe forms,and the message tells that to install a forms design tool,please tell me which tool in need to install and where i will get this tool.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
Thanks,
Deesanth.

FIrstly, you have posted the question in the wrong forum. There's an entire forum in SCN only for Interactive Forms: .
Secondly, this is a frequently asked question, especially in the Interactive Forms Forum. There's enough information there to get your query solved by searching.
pk

Error :Required parameters missing when calling up module MARC_SINGLE_READ

Dear all,
When trying to do the production order confirmation i am getting the error "Required parameters missing when calling up module MARC_SINGLE_READ".How can this error be solved?
Thanks,
Kumar

Hi
Please activate the corresponding programs again. I think you got a short dump for this error, if yes, you can see the program's name there.
Best Regards.
Leon.

M faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

m faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

Nobody can tell you anything without system information and other details. Ask in teh Premiere forum and provide al lthe required info.
Mylenium

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

Trouble with field output conversion when activating the Adobe Forms

Hi everybody,
I'm facing an issue very strange.
I made an interactive form for a customer which is based on abap dictionnary and send by e-mail to user. This form works fine and is in Production system .
Now i made an evolution on this form and when i activate the forms in SAP , all the field conversion are lost so when i got the form Date fields appears with 00000000 if they are empty.
To solved this issue in Development system , i delete the form and recreate it and that's have been sold .
Now this issue appears in Quality system also after transport it...so i try to do the same way to solve it ...i create one transport order where the forms is deleted and another one to recreate it ..but the issue still alive.
I search on OSS and don't find any notes for this .
This issue also appears on aonther forms which is not interactive one ( purchase order printout ) .
I work on ECC 6.0 with AdobeLifeCycle Designer ES 2
Does anybody face this issue and solved it ?
Regards

Ok i will try to explain more clearly because i think there's a misunderstanding .
When you define an interface of Adobe forms you can choose between DDIC interface or XML interface. When you chose DDIC interface when you generate the form all necessary SAP CONVERSION EXIT are use when value are given to the XML file .
For example i got a field type datum define in my interface which is based on DDIC .
I place this field in the layout and set the edit mask in the layout with 'YYYY/MM/DD' for example.
Now i execute the forms and give value '00000000' to the field, normally what should appears in the result is : nothing because it's an initial value.
But in my case the value appears as '00000000' , the edit mask in the form is not taking into account and the conversion of value inside ABAP Stakc is not done.
When you have a look inside the function module generated by the form, you will fin a routine which name is %WORK and inside it you will see a routine which is %OUTPUT which is call for each field you want to print in the form .
If my field is correctly output on the form the data type is givent to this routine in order to make it correct and until now everuthnigs looks good for me but my issue is that the data type of field are not given to this routine so it consider each field as simple TEXT and that wrongs.
juste bellow the code generated for the routine %OUTPUT
form %output using p_name      type fpfield
                   p_value     type any
                   p_datatype type datatype_d
                   p_abap_type type c
                   p_reffield type fpunit
                   p_unit      type any
                   p_edit_mask type convexit.
case p_abap_type.
    when cl_abap_typedescr=>typekind_struct1 or
         cl_abap_typedescr=>typekind_struct2 or
         cl_abap_typedescr=>typekind_table.
*     ignore
    when others.
      call function 'FPCOMP_WRITE_DATA_FIELD'
        exporting
          i_field_name   = p_name
          i_value        = p_value
          i_ddic_type    = p_datatype
          i_data_type    = p_abap_type
          i_edit_mask    = p_edit_mask
          i_ref_name     = p_reffield
          i_ref_value    = p_unit
        exceptions
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          others         = 4.
      %fpcomp_error.
endcase.
endform.                    "%output
is it more clear now ?
Regards

Call a Adobe form from button

Hi,
In an Adobe form have a Submit button, after I click on this submit button should call another Adobe form.
How we can do?
Thanks and Regards,
Prabhakar Dharmala

Hi
To call an Adobe form u can use the folowing class CL_SSF_XSF_UTILITIES and method GET_BDS_GRAPHIC_AS_BMP as shown below.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    EXPORTING
      p_object       = c_graphics
      p_name         = lv_pernr1
      p_id           = c_bmap
      p_btype        = c_bcol
    RECEIVING
      p_bmp          = ls_z_if_test_cv-im_photo
    EXCEPTIONS
      not_found      = 1
      internal_error = 2
      OTHERS         = 3.
So that the new PDF form will get opened with details. try it.
provide REWARD points...:-)

How does Time Statment Web Dynpro calls an Adobe Form of R3?

Hi forum
I want to know how works the Web Dynpro of Time Statement. The cause of my dude is that this dynpro shows an Adobe Form that is into R3, not in NWDS and Adobe. I want to calls some Adobe Forms since a Web Dynpro for Java. Some body knows how to do this.
Thnks
Josué Cruz

Hi,
If you go for TC HRFORMS, there you can find some HRFORMS global. we need to activate that form and configure the feature called "HRFOR". This works once implemented time evalution.
Thanks & Regards.

How to call a Search help in a function module?

Hi Experts,
I am a novice to ABAP, I am working on search helps. My requirement is to call a search help in a function module.
Can anyone please throw some light on this.
Any inputs will be helpful.
Thanks,
Amita

yes you can do that..
in side the source code ..
write the select statement according to requirement and pass the internal table to below function moduel and return field to yor help field..
call the below fm inside the function module..
'POPUP_WITH_TABLE_DISPLAY' or 'REUSE_ALV_POPUP_TO_SELECT'
see the sample code...
FUNCTION Z_MFG_PLANTS_F4 .
"*"Local Interface:
" IMPORTING
"     REFERENCE(W_WERKS) TYPE WERKS OPTIONAL
" IMPORTING
"      REFERENCE(W_MATNR)    TYPE MANTR OPTIONAL
Alv popup display
DATA : gc_selfield     TYPE slis_selfield,
       gt_fieldcat_drd TYPE slis_t_fieldcat_alv WITH HEADER LINE.
p_werks = W_WERKS.
data : begin of t_marc occurs 0,
            werks type werks,
            matnr type matnr,
        end of t_marc
select matnr werks from marc into table t_marc where werks = p_werks.
IF t_disp[] IS NOT INITIAL.
gt_fieldcat_drd-seltext_m = 'Material'.
gt_fieldcat_drd-fieldname = 'MATNR'.
APPEND gt_fieldcat_drd.
CLEAR : gt_fieldcat_drd.
gt_fieldcat_drd-seltext_m = 'WERKS'.
gt_fieldcat_drd-fieldname = ''WERKS'.
APPEND gt_fieldcat_drd.
CLEAR : gt_fieldcat_drd.
Allow the user to select the required plant
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
      i_title               = 'Material Selection for Plant'
      i_selection           = 'X'
      i_screen_start_column = 5
      i_screen_start_line   = 5
      i_screen_end_column   = 70
      i_screen_end_line     = 20
      i_tabname             = 'T_MARC'
      it_fieldcat           = gt_fieldcat_drd[]
    IMPORTING
      es_selfield           = gc_selfield
    TABLES
      t_outtab              = t_MARC
    EXCEPTIONS
      program_error         = 1
      OTHERS                = 2.
IF sy-subrc 0.
ENDIF.
READ TABLE t_MARC INDEX gc_selfield-tabindex.
IF sy-subrc = 0.
        w_matnr = t_matnr-matnr.
ENDIF.
ENDIF.
ENDFUNCTION.
rgrds,
Shweta

Calling a Selection Screen from a Function Module/Method

Hi,
I would like to call a selection screen from a function module or method. I understand it is not possible by the definition. Are there any alternative options as I am looking for the Variants Save option on the screen. Any thoughts?
Thanks
Raghav

Since i don't know your exact requirements (standard SAP selection screen? your own selection screen?) the onl;y thing i can come up with is:
1. in your function pool create your own screen with a subscreen area
2. create your own selection screen as a subscreen.
3. include the selection subscreen in the first screen
4. call the first screen in your function.

Object Referenced Error When calling the Windows Form during Runtime

Hi,
I am getting Object reference errors when running windows form during runtime. In debugging mode in MS Visual studio 2005, I am not getting this error. I'm calling the window form from menu and called the window in a thread as suggested in one of forums . I don't see anyone in the forum mentioned this problem I have. Any help would be deeply appreciated. Below are the error and code samples.
ERROR Message
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at Project1.Loadxml.Loadxml_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: Albert Tio on Feb 16, 2011 9:55 AM

Here is the code.
Option Strict Off
Option Explicit On
Friend Class GetEvents
    Public WithEvents SBO_Application As SAPbouiCOM.Application
    Public SboGuiApi As SAPbouiCOM.SboGuiApi
    Public oForm As SAPbouiCOM.Form
    Public oDBDataSource As SAPbouiCOM.DBDataSource
    Public oCompany As SAPbobsCOM.Company
    Public RS As SAPbobsCOM.Recordset
    Public oPrev_Bank As String, oPrev_AcctType As String
    Public oLoadXml As Loadxml
    Public Sub SetApplication()
             'Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        ' by following the steps specified above, the following
        ' statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        ' connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        ' get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
    Public Sub SetCompany()
        Dim ret As Long
        Dim MsgStr As String
        Dim Cookie As String
        Dim ConnStr As String
        Try
            oCompany = New SAPbobsCOM.Company
            Cookie = oCompany.GetContextCookie
            ConnStr = SBO_Application.Company.GetConnectionContext(Cookie)
            '//before setting the SBO login context make sure the company is not connected
            If oCompany.Connected = True Then
                oCompany.Disconnect()
            End If
            ret = oCompany.SetSboLoginContext(ConnStr)
            If Not ret = 0 Then
                Exit Sub
            End If
            ret = oCompany.Connect
        Catch ex As Exception
            SBO_Application.MessageBox(ex.Message)
        End Try
        MsgStr = ""
        If Not ret = 0 Then
            oCompany.GetLastError(ret, MsgStr)
            SBO_Application.MessageBox(MsgStr)
        Else
        End If
    End Sub
    Public Sub New()
        MyBase.New()
        ' set SBO_Application with an initialized application object
        SetApplication()
        SetCompany()
        AddMenuItems()
    End Sub
    Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
        Dim myThread As New System.Threading.Thread(New System.Threading.ThreadStart(AddressOf LoadXmlMainThread))
        Try
            If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
                'SBO_Application.MessageBox("My sub menu item was clicked")
                '// Create a form to be launched in response to a click on the
                '// new sub menu item
                myThread.SetApartmentState(System.Threading.ApartmentState.STA)
                myThread.Start()
                'Loadxml.ShowDialog()
                            End If
        Catch ex As Exception
            SBO_Application.MessageBox("1." & ex.Message)
        End Try
        'If (pVal.MenuUID = "MyGoToMenu") And (pVal.BeforeAction = False) Then
        '    SBO_Application.MessageBox("My GoTo Menu was clicked")
        'End If
        'If (pVal.MenuUID = "MySecondGoToMenu") And (pVal.BeforeAction = False) Then
        '    SBO_Application.MessageBox("My Second GoTo Menu was clicked")
        'End If
    End Sub
    Private Sub LoadXmlMainThread()
        'Dim lLoadxml As New Loadxml
        Try
            oLoadXml = New Loadxml
            oLoadXml.WindowState = FormWindowState.Maximized
            oLoadXml.ShowInTaskbar = True
            oLoadXml.TopMost = True
            oLoadXml.Activate()
            Application.Run(oLoadXml)
        Catch ex As Exception
            SBO_Application.MessageBox("2." & ex.Message)
        End Try
    End Sub
    Private Sub AddMenuItems()
        '// Let's add a separator, a pop-up menu item and a string menu item
        Dim oMenus As SAPbouiCOM.Menus
        Dim oMenuItem As SAPbouiCOM.MenuItem
        Dim i As Integer '// to be used as counter
        Dim lAddAfter As Integer
        Dim sXML As String
        '// Get the menus collection from the application
        oMenus = SBO_Application.Menus
        'Save an XML file containing the menus...
        'sXML = SBO_Application.Menus.GetAsXML
        'Dim xmlD As System.Xml.XmlDocument
        'xmlD = New System.Xml.XmlDocument
        'xmlD.LoadXml(sXML)
        'xmlD.Save("c:
mnu.xml")
        Dim oCreationPackage As SAPbouiCOM.MenuCreationParams
        oCreationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams)
        oMenuItem = SBO_Application.Menus.Item("43520") 'moudles'
        Dim sPath As String
        sPath = Application.StartupPath
        'sPath = sPath.Remove(sPath.Length - 3, 3)
        If sPath.EndsWith("\") = False Then
            sPath = sPath & "\"
        End If
        '// find the place in wich you want to add your menu item
        '// in this example I chose to add my menu item under
        '// SAP Business One.
        oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_POPUP
        oCreationPackage.UniqueID = "MyMenu01"
        oCreationPackage.String = "Unbridle Menu"
        oCreationPackage.Enabled = True
        oCreationPackage.Image = sPath & "unbridle.bmp"
        oCreationPackage.Position = 15
        oMenus = oMenuItem.SubMenus
        Try ' If the manu already exists this code will fail
            oMenus.AddEx(oCreationPackage)
            '// Get the menu collection of the newly added pop-up item
            oMenuItem = SBO_Application.Menus.Item("MyMenu01")
            oMenus = oMenuItem.SubMenus
            '// Create s sub menu
            oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_STRING
            oCreationPackage.UniqueID = "MySubMenu"
            oCreationPackage.String = "Unbridle Monitoring"
            oMenus.AddEx(oCreationPackage)
        Catch er As Exception ' Menu already exists
            'SBO_Application.MessageBox("Menu Already Exists")
        End Try
    End Sub
End Class
Public Class Loadxml
    'Inherits System.Windows.Forms.Form
    Public sBPpath As String
    Public sGLpath As String
    Public sBillpath As String
    Public bRun As Boolean
    Private Sub Loadxml_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Me.TextGL.Text = System.Configuration.ConfigurationSettings.AppSettings("GLAcctDownloadPath").ToString()
        Me.TextBP.Text = System.Configuration.ConfigurationSettings.AppSettings("BPAcctUPloadPath").ToString()
        Me.TextBill.Text = System.Configuration.ConfigurationSettings.AppSettings("BillUPloadPath").ToString()
        Me.NotifyIcon1.Visible = False
    End Sub
End Class

Error while calling a adobe form?

Hi All,
in my webdynpro component , i am calling adobe form.but i am getting error as mentioned below.
Error when processing your request .......
Webdynpro Exception:The ADS call has failed.you can find information about the
cause in the error.pdf on the application server.
why this error coming? even when i execute a standard application also i am getting this.why?
Regards,
lakshmi.

Abhi
I too got the same error:
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.
I refered the link provided by you for testing the ADS configuration and it displayed a 2 page report.
Is that mean that there is a problem in my form?
Regards
Vijai

Error when call a interactive form from a report.

Hi everybody!
When i use report SAPBC480_DEMO to call form BC480_FINAL, i have the error ADS: Request start time:.......
I don't know how to fix that error. Can anybody help me?
Thank!

Hi Duo,
i was facing similar problems. It could be solved by installing the Reader Right Credentials. If you want to use a pdf with editable fields (no read-only document) you have to install the RRC. Check this url
[http://help.sap.com/saphelp_nw2004s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/content.htm]
and notes 736902 , 1016404.
if you start stack trace as mentioned in note 1016404 you will be able to get through.
Regards,
Ashish Shah

Error "Job already started" when calling a adobe form in Z function module

Similar Messages

Maybe you are looking for