Error KI 280 while converting PR in to PO

Hi Experts ,
When we create a sales order with an item of item category (TAS)(Third part sales) a purchase requisition is automatically created and these requisitions pick a G/L account which is defined for third party sales
We have been using this G/L account for third party sales and never defined this account as cost element.
We do not want to post the charges in to controlling , is this possible for us to correct the error without changing message control?
Now when we convert such purchase requisitions in to a purchase order system gives an error "define G/L account 60100071 as cost element".
Earlier we have been creating PO's from PR's with same GL account.
I am new to this module and will appreciate if can get some documentation on account determination and posting of charges at my personal email [email protected]
Any help in this regard will be appreciated,
Thansk & Regards
Anand Tripathi

Hi,
In that Comp Code you have defined the G/L account 60100071 as cost element..
Go to FS00 and enter the G/L account 60100071  & Comp Code.. and click the change button...
Then you will find "Edit Cost Element button on the top right hand side... click the tab & there you find a default tab...
in that you need to maitain the Cost Centre...
Thx
Raju

Similar Messages

  • Error in IBR while converting xlsb to pdf

    Step PDFExport forced conversion failure by conversion engine because of error: EXOpenExport() failed: no filter available for this file type (0x0004)

    I would suggest you contact Oracle support about this. I don't think I have seen this extension / file format on the supported formats list. So your options are:
    - don't convert it
    - don't submit xlsb, but xlsx instead
    - hope for oracle support (and development?) to help you find a solution
    Regards
    Wim

  • Acrobat is not letting me combine files anymore. It says an error has occured while converting. Why

    When I try to combine my files, acrobat starts to get the files ready and then it shows that it has failed because of some error occurring. I even tried to combine files I have combined before and the same has happened to them, so I know that it is a problem with acrobat and not my files. How can I rectify this.

    Hi daicheese,
    Are you trying to combine files in Adobe PDF Pack (either online or via Reader) or in the Acrobat desktop application?
    If you're using Reader, please choose Help > Check for Updates and make sure you're using the most recent version.
    If you're using PDF Pack, please clear the browser cache and try again, or try converting using a different browser. Also make sure there are no firewall or proxy settings that are limiting your access to the Internet.
    Please let us know how it goes.
    Best,
    Sara

  • Error while converting class file to exp and jca file

    error while converting *.class file to *.exp and *.jca file
    =====================================================================================================================
    linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
    error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
    error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
    conversion completed with 2 errors and 0 warnings.
    =====================================================================================================================

    i compile a file javacard use this command:
    ===
    javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
    ===
    and try to convert this class use this command
    ===
    /home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    ===
    result convert:
    ===
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
    converting com.sun.javacard.samples.Identity.Identity
    error: export file framework.exp of package javacard.framework not found.
    conversion completed with 1 errors and 0 warnings.
    ===
    why ??
    please your comment for this problem.
    thank 4 all.

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

  • Error occurred while converting the file...

    So, it seems like every CD that I tried importing over the last couple of days at some point caused the software to stop and go:
    Error occurred while converting the file "[Track name here]". An unknown error occurred (-50).
    Has a solution been found for this? Have others experienced this problem? How do I fix this?

    Importing problems have been rife in the recent iTunes release.
    Not sure how to solve your problem, but until a solution comes along feel free to rip in another program, such as Windows Media Player, and add the resulting MP3s to your iTunes library.

  • 'Error occured while converting the file--unknown error occured 0x77686174

    I just got my first iPod but I'm a little frustrated. I put in a cd, iTunes opens and asks me if I want to import the songs, I reply yes. When it tries the very first song of the cd, it immediately comes up with 'Error occured while converting the file "name of song". An unknown error occured (0x77686174).' It doesn't matter if this is a completely new cd or an older one.
    I ran CD diagnostics on iTunes and my results are below. I have posted this several times on many different boards and haven't found any solutions or been given any solutions from anyone. I have an iPod that I can't use because I can't download any songs...does anyone have any idea what to do?
    I've looked at Dell to update drivers for my cd drive but it says that I have the newest drivers...the computer isn't even a year old yet. What do I do?? I've wiped the cd like several posts say to do, I've clicked the fix error option on cd off and on like several posts have said to do, I've changed the conversion of 128 to 64 like several posts have said to do...help please, anyone?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.3.1.3
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    Disk drive, ST3160812AS, Bus Type ATA, Bus Address [0,0]
    Disk drive, TEAC USB HS-CF Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-MS Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-SD Card USB Device, Bus Type USB
    Disk drive, TEAC USB HS-xD/SM USB Device, Bus Type USB
    CD-ROM Drive, TSSTcorp CDRWDVD TS-H492C, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: TSSTcorp CDRWDVD TS-H492C, Rev DE02
    Audio CD in drive.
    Found 12 songs on CD, playing time 54:35 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:30:32
    Track 3, start time 09:38:25
    Track 4, start time 14:58:53
    Track 5, start time 18:01:08
    Track 6, start time 21:24:57
    Track 7, start time 26:37:43
    Track 8, start time 32:16:51
    Track 9, start time 36:17:54
    Track 10, start time 41:57:36
    Track 11, start time 46:21:38
    Track 12, start time 51:48:24
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 48.
    The drive CDRW speeds are: 48.

    I came across your error code in iLounge, this post might help you out: http://forums.ipodlounge.com/showthread.php?threadid=30496

  • Error Occurred While Converting the file"name of song" The file name.......

    I get this message when I try to import some CD's to my library.
    A window pops up and says
    Error occurred while converting the file "name of song"
    The file name was invalid or to long.
    Anyone else ever get this message, and how can you import CD's???????

    I have had this exact same problem. I'm not sure how to fix it...

  • Error occured while converting the file . . . . . .

    While trying to import a music CD into iTunes, I get the following message:
    Error occured while converting the file "Handel: Messiah, HWV 56 - Sinfony". You do not have the privelege to make changes.
    The song in question is: Handel: Messiah, HWV 56 - Sinfony.
    I've imported a number of CDs into iTunes and have never seen this before.

    Hi, LongIsland14. 
    Thank you for visiting Apple Support Communities.
    This issue would be related to a permission issue most likely with the iTunes Media folder.  Here are a couple articles that will help you troubleshoot this issue.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Cheers,
    Jason H.

  • "Error occurred while converting the file "song name."

    While trying to import 3 different CD's into iTunes, the message "Error occurred while converting the file "song name. The required folder cannot be found." The song name is the first song of each of the CD's I tried to import. Have imported over 3,000 songs and never had this happen before. Help?

    I think I found out why this happens. I am using an external hard drive, not sure if this is relevant, but I believe so. I went into iTunes and deleted the songs, and asked that they be deleted from the library as well. Got same message when I tried to re-import. Went on to the external hard drive, where library is located, and none of the songs had been deleted. Deleted the songs, as well as the albums folder, re-imported, no problems. Hope that helps.

  • Error while converting form from 3.0 to 6.0

    Hi, everyone
    While converting a 3.0 form to 6.0, I issued the following
    command:
    ifcmp60 MODULE=ALS_DELETE.inp userid=als/ur2nice@sefindv
    upgrade=YES VERSION=30 BUILD=NO OUTPUT_FILE=ALS_DELETE
    and received back this error message:
    Message 764 not found; product=forms60; facility=FMG
    What is going on? Does anybody knows about some good online
    documentation on this?
    Thanks a lot in advance,
    Eduardo

    Tom, I did an "upgrade" to Tiger and my render files are all on an external firewire drive anyway.
    If I switch from "fastest (the way 3.0 renders)" to "normal" will I have to re-render existing files, or does that only apply to segements I render in the future? Thanks for your repeated help.

  • Error while converting jad and jar to alx and cod files

    hi all,
    i am getting an error while converting jad and jar files into cod and alx files for balckberry.. here is the error i am getting.. can anyone help me this regard...
    Parsing classfile: txtCanvas.class
    I/O Error: Import file not found: d:\Research In Motion\BlackBerry JDE4.6.0\lib\
    net_rim_api.jar
    thanks in advacne
    pallavi

    thank you very much for your responses. can i send my cod and alx files to check. if you are interested only.
    here is the command which i used to convert my jad and jar files
    D:\Research In Motion\BlackBerry JDE 4.6.0\bin>rapc import="d:\Research In Motio
    n\BlackBerry JDE 4.6.0\lib\net_rim_api.jar" codename=MoBilalMIDlet -midlet jad=M
    oBilalEnglish.jad MoBilalEnglish.jar

  • Error: EXOpenExport() while converting xlsb file to PDF

    I am getting this error while converting .XLSB file to PDF using IBR :Step PDFExport forced conversion failure by conversion engine because of error: EXOpenExport() failed: no filter available for this file type (0x0004). Can anyone tell me how to resolve this issue.
    Thanks in advance.

    Thank you for all your intrest.
    The error message I get is... "an unexpected error occured. PDFMaker was unable to process the request".
    When I then try to convert again, the system opens the ppt, but then does not do anything, and the error message does not show, for all presentations I try to convert.
    I have also tried using the ribbon, but the button does not do anything once I have clicked.
    I can print to PDF, but this provides an output which is not suitable, because it shows as if it each slide was printed on to paper and then put in PDF.
    I have also uninstalled and reinstalled Acrobat to make sure nothing was corrupt.

  • Error while converting

    Hi,
    when tried to convert files to Apple TV compatible format through iTunes option got the following error - Error occurred while converting the file (file name).An unknown error occurred (-54).
    Files are .mov and .dv
    Please,advise what had happened.
    Thank You
    M

    I've got the same problem with MPG 4 files from Podcasts or even files from youtube converted by Tubesock. This happens with individual files, never tried a bulk conversion....
    Oliver

  • "Error occurred while converting the file 'song name'. The required disk cannot be found"

    Hi, I saw this issue in an archived discussion, and I just had the same problem, but figured out how to resolve it.
    I think this error is a result of:
    A) downloading a new version of iTunes, and;
    B) storing my iTunes library on an external hard drive.
    Because when the new version of iTunes was downloaded, I found that the destination folder for my iTunes music was no longer selected. Therefore, I was getting the error message: "Error occurred while converting the file 'song name'. The required disk cannot be found" when I tried to import CDs.
    To fix: go to:
    iTunes>Preferences>Advanced
    and specify your destination folder for your music.
    Just wanted to share!

    Thank you so much! I was in the same situation (iTunes library stored on external hard disk). Strangely, iTunes knew where my music was stored (i.e. if I clicked a song it would link to the library location and play with no problems). But in the "Advanced" settings, the location of my iTunes Library was blank. So I just pointed to the correct location and now everything is working OK! Thanks again.

Maybe you are looking for

  • Technical System (Application Server ABAP) - problem with data supplier

    My system had problems, I believe with the Data Supplier in LMDB there are errors How can I update / re-add in the SLD/LMDB data supplier? And how can you get it working correctly providers who do not receive the data (though the system sees them)

  • HELP! Installed new OS but...

    Pls help. I was in the midst of installing the new 4.5 OS for my curve and suddenly half way through installation it prompt that device was not connected. the desktop software suggested to reinstall the backup file. at this point of time, i can't eve

  • MDM Console Connectivity to MDM Server

    Hi, My scenario is that I have install MDM Server on one machine with Oracle as Database.  Now when I try to connect to connect to that MDM Server using MDM Console from other machine it is not connecting. The machine on which Console is installed is

  • Can't hear phone calls, can't open messaging app.  I've tried everything.

    Okay, so every time I receive a phone call, I can't hear them very loudly and my volume is at it's highest.  When I make a call, it doesn't even ring.  Last, but not least, when I try to open my messaging app, my phone freezes and then the app closes

  • Adobe CS 6 Separated PDF issue

    We are currently working in Adobe Illustrator CS6 and are having an issue in separations where the ai file has no black in it only spot colors. A separated pdf is created from a Post Script file. The PDF does not view with a black in it, but when pri