Error launching the power pivot report builder in SharePoint 2013

I have sharepoint site which uses classic windows authentication.
i uploaded a simple excel file with two columns which has a data model created in Excel 2013.
I am trying to create a power view report out of it in SharePoint ..
I am getting following errorrs
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://devreports.hellosolutions.com/TestPowerPivotGallery/Ageofrol.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.5058.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://devreports.hellosolutions.com/TestPowerPivotGallery/Ageofrol.xlsx'. Verify that the connection information
is correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
kukdai

Hi,
According to your post, my understanding is that you could not launch report builder in the client machine.
Did you install the .Net 4.0 framework on your machine?
.Net 4.0 framework needed to be installed on each user's machine, you can install it, then check whether it works.
More information:
http://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
As this is the forum for SharePoint server on-premise, I’m not familiar with the Reporting service, for this issue, I recommend you can post a new question in the forum for SQL Server Reporting Services.
https://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to Reporting Services.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Cannot launch Report Builder in SharePoint 2013

I am trying to launch report builder in SharePoint 2013 Library i have.
I am not able to launch the report builder.
In IE it doesn't do anything there is no activity.
in firefox and Chrome it downloads the application and gives followingerror in the attached image.
I have tried following this already still not able to work
1. Installed the report builder 2012
2. Ran this in command prompt :rundll32 dfshim CleanOnlineAppCache
3.tried in compatible version in IE with IE 9,8 still same
How can i launch the report builder from client machines.
But when i try to launch the application from the server itself then it runs fine. I am not able to run it from client machines
kukdai

Hi,
According to your post, my understanding is that you could not launch report builder in the client machine.
Did you install the .Net 4.0 framework on your machine?
.Net 4.0 framework needed to be installed on each user's machine, you can install it, then check whether it works.
More information:
http://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
As this is the forum for SharePoint server on-premise, I’m not familiar with the Reporting service, for this issue, I recommend you can post a new question in the forum for SQL Server Reporting Services.
https://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to Reporting Services.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Where can I find metadata for Power View reports created in sharepoint 2013.

I am looking for what I would assume is the sql server tables that would hold the MDX (DAX) Queries for the power view reports. Example my customers may create say 30 reports and I need to know quickly if an attribute I am changing is in those reports.
How can I find out what report(s) are using that attribute/measure? Not sure that it matters but using sharepoint 2013 on premise and connecting to Analysis Services (molap).
Ken Craig

P.S. if this is still not making sense create a power view report in SharePoint from a SSAS cube. Save that power view report in SharePoint.  The power view report should
have a couple of measures and 1 or 2 dimension. Open the report just to confirm it is saved correctly. Now go to SSAS and rename 1 of the measures or dimensions that you used, Save and rebuild your olap . If it’s a calculated measure
you just need to save olap.    Now open your power view report and notice that that measure/dimension you changed is no longer in the report.
IN one hand it is great that reports do not error and break; however, on the other hand the users might not know what measure/dimension changed and then be lost/mad because the report no longer
works like they want. In my opinion it would have been better if the power view broke with an error message that it cannot load because measure x does not exist than to just load fine.
In any case I need a method to know when a dimension/measure is modified what reports are using it.   Another example is this could even be a case where the dimension values are getting
modified and we need to potentially make a update to any power view/pivot using this dimension as a filter?
Ken Craig

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Power pivot report freeze while scrolling

when scrolling the power pivot reports that are long the excel window freezes, the field list turns white, there's no data loss though, I can click the close button and it will give me the option to save the data if I haven't saved anything, they I go in
the task manager and end task any running excel processes and it would start working again, this happens on multiple computer in the orgs (with different os windows 7, 8.1 server 2012 r2).

Excel 32-bit or 64-bit? And how large is the workbook?
If 32-bit, it's possible that it is facing memory issues. Try 64-bit if you can and see if you have better results.
Regards, Avi
www.powerpivotpro.com
Wiki:How to ask a Power Pivot Question to get a prompt, accurate and helpful response

Getting an "unable to Load the tables in the power pivot window" error

Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
Nathan

Hi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
   bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
   bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo

Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaq

Hi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq

Error While Opening JSP in Report Builder converted from RDF

Hi,
I am using Oracle reports 9i to convert rdf into jsp and invoke this jsp using OC4J to get HTML report.
The problem i am facing is that while converting RDF to JSP conversion went on successfull but when iam trying to open the JSP in Report builder it gives me error REP-2: Unable to retrieve string from message file.
When i want to see the paper layout it is not present and datamodel is also corrupted. In the data model sources for some fileds become null and one addtional group is appearing with no column in it.
Urgent help is needed.
For any help Thanks in advance.
Regards
Sanjay Tripathi

Hello Sanjay,
There are some known issues in Reports 9i due to which XML/JSP reports do not open correctly in Builder, and throw the REP-0002 error. These bugs are currently being looked into, and will be addressed soon.
1. If your report is using ref cursor queries, and you are hitting the above error, please ensure you connect to a database before you open the report.
2. If your report has summary/formula columns, please try to create the JSP report without these columns and then try to open it in Builder.
Thanks,
The Oracle Reports Team.

Can't save power pivot report back to power pivot gallery...file is read only

Hi eb
I have developed an excel pivot report in a power pivot gallery (all in 2013).
Next time i open that report from the power pivot gallery and attempt to save it again to the gallery
I am blocked with a msg: we cant save http://........./powerpivot gallery/myPwerPvt.xslx file is read only.
To keep your changes you'll need to save the woorkbook with a new name or different location.
Please help!
TIA
Rea

Hi Rea,
When you try to edit the PowerPivot workbook, are you open it as read-only mode? Please see the screenshot below:
The "Read Only" mode will not be able to save any changes to the workbook you are loading.
In addition, is it work for you while you save the PowerPivot workbook with a new name?
Regards,
Elvis Long
TechNet Community Support

The Power Query ribbon and the Power Pivot ribbon are gone !

Hello,
I created in Excel 2013, using Power Query, two large tables (more than 4 000 000 rows) according this principle: << However,
the query pane that shows up on the side while data is loading lets you disable "load to worksheet". The data will continue to download. Once the download is done, you can click on "Load to Data Model" which will then get the data into
the underlying xVelocity/data model.>>
I built two calculated columns in order to create PRimary and Foreign keys for relations.
I saved the xlsx file several times
I Closed the xlsx file
I reopened the xlsx file but, bad news, the
Power Query ribbon and the Power Pivot ribbon are gone !
I can check the the data connections are still there.
What happened? What did I miss ?
Thanks for your help
Error message when I refresh connections :

When I restart the computer, Power
Query and Power
Pivot ribbons come back. But if I enter a
formula, they go away again.
What could be the solution?

How to seperate Power Pivot Data Model and Power Pivot Report from Single Workbook.

HI Team,
Initially, We have created Power Pivot report in workbook, containing Source Data Model as well.
Now, we want to convert workbook having model as Shared Data Model, and all report needs to be part of single workbook.
I want to implement one of the below solution, but know how to do it.
1. Separate and Export all Power Pivot report sheet into single Excel Workbook such that it will have all report sheets.
2. Use Same Model as it is and delete reports from existing one after export to new excel workbook.
OR
Is there is any other way to avoid re-creation of reports again? I want to use same report but instead of Embedded Excel data source, I want to use shared data Source in excel.

One option is to use one workbook as the data source(model) and other workbooks for the reports. This works in the stand alone Excel and SharePoint versions of Power BI, but not yet in O365 Power BI version.
There is no export functionality. You would have to copy the workbook and update data source references. I have never tried it, but in theory it should work :).
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.
Hi Michael,
Yes your answer is partially correct..thanks for reply, I am working on Power Pivot reports on SharePoint.
However, below issues observed.
1. There is No Export Functionality ( as you told)
2. We can not copy report sheet from workbook1 (which has Data Model) to Workbook2 ( only for report) using Control + C (copy) and Control + V (paste) option.
Or Move Power Pivot Table ..
So, solution can be (as you said, unfortunately I tried it already but dint worked)
1. Copied workbook with New Name - Workbook2.
2. Go to Data -> I tried to change connection setting -> to use shared Data Model -> I could create new Pivot table using shared Data Model
But, Still I could use earlier designed Power Pivot tables as it is, to point to shared data model.
I don't want to re-design entire report. As my project workbook has plenty reports.... :)

What is the name of Report Builder Resource File

Can Anybody knows what is the name of Report Builder Resource file and can it open in Oracle Terminal or not.
Regard's
Fahed

How to create a new one.http://download-uk.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_arch.htm#i1005582
http://download-uk.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_strt.htm#i1007097

Is Power Pivot Gallary available in Sharepoint Online?

Dear Sir/Madam,
We would like to know whether the Power Pivot gallery is available in SharePoint Online. Please advise. Thanks.
Regards,
Winsee

Hi Winsee
It looks like this is not possible to connect PowerPivot in an online solution.
Here is a similar thread for you to take a look:
http://community.office365.com/en-us/forums/154/p/20590/96566.aspx#96566
Please mark it as answer if it helps you solving your problem
Amit Kotha

Can I label a Power View sheet created in SharePoint 2013?

Hi,
Is this possible to label a Power View sheet created in SharePoint 2013 and have it shown on the preview snapshots?
This is because in the PowerPivot Gallery in SharePoint 2013 has a really nice display of previews with Excel workbook that includes a label on top of the preview for each worksheet in the workbook.
Thanks,
Jane

P.S. if this is still not making sense create a power view report in SharePoint from a SSAS cube. Save that power view report in SharePoint.  The power view report should
have a couple of measures and 1 or 2 dimension. Open the report just to confirm it is saved correctly. Now go to SSAS and rename 1 of the measures or dimensions that you used, Save and rebuild your olap . If it’s a calculated measure
you just need to save olap.    Now open your power view report and notice that that measure/dimension you changed is no longer in the report.
IN one hand it is great that reports do not error and break; however, on the other hand the users might not know what measure/dimension changed and then be lost/mad because the report no longer
works like they want. In my opinion it would have been better if the power view broke with an error message that it cannot load because measure x does not exist than to just load fine.
In any case I need a method to know when a dimension/measure is modified what reports are using it.   Another example is this could even be a case where the dimension values are getting
modified and we need to potentially make a update to any power view/pivot using this dimension as a filter?
Ken Craig

Disable Edit Report Option from SharePoint 2013 PowerView Dasboard

Hi All,
I have PowerView Dashboard in Sharepoint 2013, In a Preview Bar there are three options i.e. File, Edit Report, Full Screen.
The requirement is disable only Edit Report Option from preview bar not all.
Please help me if there is any possibility for the same.

Hi,
Based on your description, you want to disable the edit report option from SharePoint 2013 PowerView Dasboard.
There is a workaround:
You can change the permission of the report. You should upload the report to a SharePoint library and set a user have read-only permission of the report. When the user open the report and save the changes, it will have error. The user cannot edit the report.
The article below is about change the report permission in order to disable the edit option.
http://parasdoshi.com/2013/10/30/a-note-about-edit-report-button-seen-on-power-view-in-sharepoint/
Best regards
Sara Fan
TechNet Community Support

Error launching the power pivot report builder in SharePoint 2013

Similar Messages

Maybe you are looking for