Error Log entry Unable to write file with XML Saver

Hi all,
I have just encountered the following problem. I am saving a XML file using the XML Saver. Another BLT reads the file, changes something, and saves it again with the same name.
The file is saved, but the NetWeaver SAP Log gives the error
"Unable to write file /usr/sap/<SID>/JC00/j2ee/cluster/server0/apps/sap.com/xappsxmiiear/servlet_jsp/XMII/root/CM/<folder>/file.xml"
Is it a problem with the new storage mechanism in MII 12? Even if I delete the file first and then save it again with the same name, the error is displayed (though the file is saved).
Michael

Hi Mike,
no, the Debug only says "Begin Action XML Saver" and "End Action XML Saver".
The action however writes the file, the contents has changed after the BLT has run.
Well, I have just tried the Text Saver with the same file (name and contents). It also gives the error. I now wanted to delete the folder. The folder disappered from the workbench view, and the Netweaver log says "Unable to process service message".
I then clicked "publish" on the parent folder and tried to create the folder again, but although the folder was not displayed, the workbench said "the folder already exists". When I start my BLT, it could write the file into the folder which then reappeared in the workbench.
Hm, maybe our installation has some problems? Feels like missing authorizations...
Michael

Similar Messages

FileAdapter Write file with empty payload always error

Hi All ,
I run on 10.1.3.3.1 with patch Patch 7375080 only esb not have bpel.I have to use webservice for verify data.
and response with set of objects.
I have 2 important questions about write file with FileAdapter.
1. I want to not create file if not have error from validate data but
with this xsl tranform if I uncomment when value of condition is 'N' that will error cause single line payload.
<xsl:for-each select="/tns:populateYFRIResponseElement/tns:result/tns:wrongLines">

<imp1:Child-Element>
<imp1:FrameNo>
<xsl:value-of select="concat('"',tns:frameNo,'"')"/>
</imp1:FrameNo>
<imp1:EngineNo>
<xsl:value-of select="concat('"',tns:engineNo,'"')"/>
</imp1:EngineNo>
</imp1:Child-Element>

</xsl:for-each>
but if I comment if condition 'Y' FileAdapter create csv files with empty like "","" .
2.
I must write log file with FileAdapter . I want to append file so I add attribute Append=true
to wsdl
<jca:operation
LogicalDirectory="outgoingfile"
InteractionSpec="oracle.tip.adapter.file.outbound.FileInteractionSpec"
FileNamingConvention="YFRI%yyMMdd%.log"
NumberMessages="1"
Append = "true"
>
but when run that throws errors cause properties append not found.
I view class FileInteractionSpec that have append properties .I very confuse.
Any help would be appreciated.
Regards,
Weerawat

Hi
Thank for good answer.I am newbies in esb so I don't know that have routing expression before.
I'm so glad your answer very helpful before routing but same question 1 if I have detail must not write data like below
,import file name YFRI20090616165654.DAT at Tue Jun 16 16:59:26 GMT+07:00 2009 with number of data is 2 correct line is 2
"D",0,0,
,import file name YFRI20090616170202.DAT at Tue Jun 16 17:04:40 GMT+07:00 2009 with number of data is 12 correct line is 12
"D",0,0,
YFRI.txt,import file name YFRI.txt at Tue Jun 16 19:53:48 GMT+07:00 2009 with number of data is 2 error line is 2
"D",1,3,MTOCCode:ZE8839LZ SAA is not have in DB
"D",2,3,MTOCCode:ZE8839LZ SAA is not have in DB
with
<xsd:element name="LogFile">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FileName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Desc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="Detail" nxsd:startsWith=""D"," maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence nxsd:style="array" nxsd:arrayTerminatedBy="${eol}">
<xsd:element name="line" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="""/>
<xsd:element name="column" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="""/>
<xsd:element name="desc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="""/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
ESB will display error payload If import not have verify error detail so I have to write 'D',0,0 (Detail,Line,Column).
In this situation how am I to do ?
In question 2 .Now I can append with
<jca:operation
LogicalDirectory="outgoingfile"
InteractionSpec="oracle.tip.adapter.file.outbound.FileInteractionSpec"
FileNamingConvention="YFRI%yyMMdd%.log"
NumberMessages="1"
OpaqueSchema="false"
Append="true"
>
</jca:operation>
Thank you
Weerawat

I write digital port by 'DAQmx Configure Logging.vi' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

Hello!
I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
How can I write to 1integer channel?
Attachments:
1.JPG ‏27 KB

Hey Atrina,
The actual data stored on disk is just the raw data (that is, a byte per sample in your case). It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
Read back the TDMS file as a digital waveform. Then there's a conversion function in LabVIEW called DWDT Digital to Binary. This function will convert that set of digital channels into the "port format" that you're wanting. I've attached an example of what I mean.
Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files. It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
Message Edited by AndrewMc on 01-27-2010 11:21 AM
Thanks,
Andy McRorie
NI R&D
Attachments:
digitalconvert.vi ‏13 KB

XMII 12.0: Unable to write file...

Hi all,
lately we are facing some problems using xMII. One point is that you can easily move file or folder inside the xMII 12.0 workbench because there is no confirmation popup when clicking on a folder and move it by chance.
Apparently I have moved a folder, and it seems that I produced a Catalog Server Error according to the log. Now xMII seems to be confused, because we are now getting lots of error of the kind "Unable to wirte file..." like this:
Unable to write file D:\usr\sap\MES\JC00\j2ee\cluster\server0\apps\sap.com\XMIIEnterpriseApplication\servlet_jsp\XMII\root\CM/Development/USER/xml/treestructure.xml
Have you already encountered such an error? Is it because of the "/" and "\" signs that are mixed inside the URL? Or could it be the Catalog Error mentioned above?
Thanks for a hint!
Best regards
Michael

Jeremy,
we are using xMII in combination with Adobe Flex. So xMII is going to talk to the database, and Flex as the presentation layer is calling xMII transactions to get the data.
The HTML wrapper that Flex creates and the SWF-Files are stored in the CM folder of xMII so that we can include it in the xMII Portal using the navigation wizard of xMII.
In xMII we have set up a sandbox project, so the file structure in xMII is "xMII-Root\Sandbox\Data" (Catalog) and "xMII-Root\Sandbox\WEB\Data" (Web).
When using the xMII workbench we are importing the SWF-Files into "xMII-Root\Sandbox\WEB\Data". In Flex-Builder we have set up an ant-file that deploys the SWF-Files directly into the "xMII-Root\CM\Sandbox\Data" folder after changing them. However, when only using the ant file, the copied files are gone the next day, when the WebAS restores the contents, I guess.
Using the ant files of course is much easier than using the import feature of the workbench. Maybe you can recommend a better way of deploying?
Best Regards
Michael

FDM Runtime Error Log Entry

Hi all,
I'm trying to excute a Standard Batch Loader Script, but I have always the same error.
I have realized an FDM Appication, the bacth loader script and the data file (with this name 1@JDE@Actual_Inp@August@RR ).
Adapter, Import formats, Maps and Location seems ok.
THIS IS THE ERROR LOG:
** Begin FDM Runtime Error Log Entry [2013-09-24 12:59:06] **
ERROR:
Code............................................. 6
Description...................................... Overflow
Procedure........................................ clsBatchLoader.mExecuteParallelBatchProcess
Component........................................ upsWBatchLoaderDM
Version.......................................... 1112
Thread........................................... 4100
Could someone help me?
Thanks in advance
Andrea

If I use manaul process I can see the data in Import/Validation/Export steps, if I use Batch processing no data are dispalyed....
This is the script that I'm using, maybe something is wrong?
the bacth processing settings are:
Batch Type: standard
Process Level: Up To Load
Process Methid: Serial
File Name Delimiter: @
Load Balance Server: the server name avilable on the server Group
Sub TestLoad()
'Oracle Hyperion FDM Custom Script:
'Created By: ALu
'Date Created: 9/16/2013 4:17:23 PM
'Purpose: Execute a Standard Serial Processing FDM Batch
'Standard Batch Serial Processing
'Declare Local Variables
Dim lngProcessLevel
Dim strDelimiter
Dim blnAutoMapCorrect
'Initialize Variables
lngProcessLevel = 12      'Up-To-Check
strDelimiter = "@"        'File-Name-Delimiter"
blnAutoMapCorrect = 0     'Auto Map Correction is Off
'Create the file collection
Set BATCHENG.Pcolfiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter))
'Execute a Standard Serial Batch
BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
End Sub
Thanks
Andrea

Error while relocating (Can't write file (no space)) - Help please

I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205

It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

Unable to share files with Windows

I have followed the instructions on my iMac to a "T", but am unable to share files with the wireless laptop on my network. The ethernet-wired pc can see the iMac fine and does not have to use a password to view the shared files. I must be doing something wrong with passwords - can someone please help? Thanks!

G'day v3ofushere,
You may need to provide a little more information so that we can assist you!
What version of Windows are you running on the other machines? XP, Vista, 7, 8 or 8.1? EDIT: Scratch that - I just saw that it is a Windows 7 PC from the subject!!! (DOH!).
Are your Windows computers on a domain, or are they running as a WORKGROUP?
When you say that you can't connect to the network, does this mean that you are having trouble connecting to file shares?
What are you seeing when you attempt to connect? Any error messages? Or is it simply failing to accept the login credentials and shaking the dialog box at you?
Cheers,
Rodney

Error: sp2-0310 unable to open file c:\desktop\oracle\table.sql

I am not able to open any files that I have downloaded and put into a file path. I keep getting the error sp2-0310 unable to open file. I made sure to save my files in a path with no spaces. What can I do to resolve this error message.
Thanks.

As already said, you need to verify you've really got the correct path. After that, you can also check to see that the file name is really table.sql. If you created the file in a simple text editor, sometimes the editor will append .txt to the file name. But if you have "Hide Extensions" turned on in Windows Explorer, then you wouldn't see the .txt extension. Check the file name and make sure it really is as you think and doesn't have another extension on it.
Finally, how are you trying to use the file in SQL*Plus? If the path and file name are correct, you should be able to do this:
SQL> get c:\desktop\oracle\table
and it should bring up the file into the SQL*Plus buffer. Or, you should be able to use:
SQL> @c:\desktop\oracle\table
to execute the contents of the file.
If you are simply using:
SQL> @table
then you could add the SQLPATH environment variable to point to c:\desktop\oracle and that would allow you to skip entering the path.
Hope this helps,
Karen

"error building executble. unable to create file."

Hello!
When I try to run or Build an Pocket PC application i get thes message: "error building executble. unable to create file."
I have installed:
LAbview 8
Microsoft embedded visual c++ 4.0
Microsoft Pocket PC SDK
PDA Module 8
Does anyone have a clue wats wrong?

The builder is missing the C compiler and the linker from Microsoft for the emulator target.
On my system they are located in C:\Program Files\Microsoft eMbedded C++ 4.0\EVC\wce420\bin. Check on your computer.
I couldn't find a place where to set this path (remember: I have 7.1, 8.0 may support this settings, although it's not likely).
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.

It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

Bridge opening office files with xml converter

Adobe Bridge CS3 is opening all my excel files with xml converter and promting me to save as. How do I switch it to default to Microsoft Excel when opening these files?

These options are handled in the Bridge prefs under File Associations, but if I remember correctly this is somewhat limited in CS3 since it only handles Adobe files that install their associations. Any other file type is handled by whatever the opoerating system offers. Well, you can always look and give it a try...
Mylenium

Error in LSMW Unable to write to file 'C:\ZSIGCO_CP_ZSIG

Hello,
In the Step 9 'READ DATA' I get the Error: 'Unable to write to file 'C:\ZSIGCO_CP_ZSIGCO_CP_ZSIGCO_CP.lsmw.read'
I do not know what the Problem is and how should I solve this Problem.?
Can any body help me sort out this Issue..?
Regards,
Deepak.

Thats right the file specification should look like this :-
ZXX - XX - ZXX Test
Files
Legacy Data          On the PC (Frontend)
Legacy Data          On the R/3 server (application server)
--   Imported Data        File for Imported Data (Application Server)
Imported Data                  ZXX_XX_ZXX.lsmw.read
--   Converted Data       File for Converted Data (Application Server)
Converted Data                 ZXX_XX_ZXX.lsmw.conv<<<----
destination file where to write
Wildcard Value       Value for Wildcard '*' in File Name
Reagrds
Dhirendra

Help with Web Server error log entries.

I'm having trouble turning off logging of messages from the iAS plugin to
the Web Server error log. It seems to be logging "Info" class messages to
the logs.
For example:
[24/Oct/2001:11:38:57] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/index.jsp
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:15:40:21] info ( 792): gxrequest.cpp:gxrequest() reports: End
req /NASApp/fortune/fortune
Tech support just says "uh try this this this..." and hasn't been able to
stop the logging. They won't even confirm it's a problem (logging info
messages to error logs...).
Has anyone else seen this or been able to stop it?
Thanks,

These entries normally do not get shown. Make sure you turn off
debugmode.
run kregedit and make sure iPlanet\Application Server\6.0\CCS0\HTTPAPI
is set to 0
Rodger Ball wrote:
>
I'm having trouble turning off logging of messages from the iAS plugin to
the Web Server error log. It seems to be logging "Info" class messages to
the logs.
For example:
[24/Oct/2001:11:38:57] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/index.jsp
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:11:39:02] info ( 514): gxrequest.cpp:gxrequest() reports: End
req /NASApp/wapp/PageController
[24/Oct/2001:15:40:21] info ( 792): gxrequest.cpp:gxrequest() reports: End
req /NASApp/fortune/fortune
Tech support just says "uh try this this this..." and hasn't been able to
stop the logging. They won't even confirm it's a problem (logging info
messages to error logs...).
Has anyone else seen this or been able to stop it?
Thanks,--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (SUNPS)
iPlanet e-commerce Solutions
Sun Microsystems Australia Pty Ltd

Unable to share files with other Macs after lion Upgrade

I am unable to share files other macs on my home network.
I receive an error message that the server will not allow additional users to log on.
I can connect to windows machines and can use mac screen sharing.

I have multiple machines with Lion installed (Mid 2010 MacBook Pro, 2.66 GHz Mac Mini & a late 2010 iMac) and several more runing Snow Leopard. I cannot make AFP connections to any Lion machine from any other machine, Lion or not. At the same time I can make Screen Sharing connections and several other types of connection to the Lion machines, and can make any type of connection (including AFP) from the Lion machines to the Snow Leopard machines.
After I enter my password, attempted AFP connections to Lion invariably draw the "This file server will not allow any additional users to log on" alert.
Yet the target Lion machine shows "Number of users connected 0". I don't know how to find the crash log, but no AFPFileServer process appears in the Activity Monitor's All Processes list on the 2 Lion machines I checked, so this might be the problem. I've tried repairing the file system & permissions, to no avail.
=> Spettinger's workaround - switching AFP off and SMB on - does indeed allow me to make file sharing connections to my Lion machines. Thanks spettinger!
But, how can this be? There is nothing unusual about my configuration: its all recent Apple hardware & system software, with no 3rd-party protocols & no hacking. Why doesn't everyone who shares files have this exact problem?

Error Log entry Unable to write file with XML Saver

Similar Messages

Maybe you are looking for