Error logging for data rules in owb11gr2
Hi all,
I was playing around with error logging for data rules and I realized that when an error gets logged into the error table for failing a particualar data rule for a table, some of the columns in the error table such as ORA_ERR_NUMBER$, ORA_ERR_MESG$, ORR_ERR_OPTYP$ were not filled in. Why is this so? Is there anyway to populate these fields as well when a row gets populated in? This is because the optype field may be useful to identify the operation type of the erronous row.
ALso, does anyone know whether the error table for dimensions work correctly? I replicate the portion of the mapping flow that goes to my dimension and even though the errornous row gets logged into the error table, the ERR$$$_OPERATOR_NAME for that row did not show the dimension object but instead show another of my table operator in the mapping. Pretty bewildered as to why this is the case.
The cube operator in 11gR2 also supports DML error logging (as well as orphan management handling). This is enabled by setting the property 'DML Error table name' (in group Error table) on the Cube operator inside the mapping. The error table specified will be created when the mapping is deployed (if you specify an existing one the error is trapped).
The DML error handling will catch physical errors on the load of the fact.
Cheers
David
Similar Messages
-
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
Error logging for Integrated Planning
Can I turn on error logging for Integrated Planning. Users get errors and forget to screenshot it to me, so I have no way of finding out what their error was unless I get them to duplicate it. It would be nice to look up a log of errors by user. Do they have something like that in Integrated Planning?
Thanks!Hi Dustin,
Few comments :
1. UPDATE TASK means that a new background task is create and the function is performed asyncronisly ,with that the user will not wait for the update of the DB to finish ,you can read in SAP help about CALL FUNCTION IN UPDATE
2. Be aware that the table that you create will be extremely large in no time ,you will have to delete data on a regular basis
3. The same concept of the thread can be applied to function module 'RRMS_MESSAGE_HANDLING' this function module is responsible of messaging in BEX 'some times IP related messages are invoked from it.
Regards,
Eitan. -
Error in loading the WSDL file. Check the error log for more details
Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
SachinHi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios -
Date management: XML-editor for Date Rules
Hello,
I'm looking for any documentation on the XML-editor for date rules (tags, attributes and so on).
Please send to [email protected]
Regards,
RomanHello,
I'm still looking it...
Any help will be appreciated.
Regards,
Roman -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
MGW error logs for Cpu utlization
Dear All
We are using Cisco AS5400 as mgw, we often found during call peak hrs thsi mgw's showing error logs for cpu utlization. I have following questions in regards to thsi error.
1. why this error logs comes?
2. where & what we need to chcek? any hardware or IOS issue?
3. main and important thing whether during such error logs there is load on MGW and due to over cpu utlization call which attempt on MGW may failed? if yesy its failed with MGW end or failed from source end as abondan? or else if MGW disconnect then what is ISDN casue code.
we are using PGW in signalling or nailed mode.
Please help me with this
Regards
Amit--Hi
Thanks to both of you
Here is log for Cpu utilization status during peak time as we see this error logs during peak time only
show proc cpu sorted | excl 0.00
CPU utilization for five seconds: 78%/36%; one minute: 73%; five minutes: 70
P
ID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
216 646931668 841788064 768 10.40% 9.81% 9.32% 0 CCH323_CT
211 723978128-1124958350 0 5.48% 5.51% 5.36% 0 VOIP_RTCP
77 437021944-2113488726 0 4.91% 4.60% 4.53% 0 IP Input
63 368724284 712553243 517 3.93% 3.96% 3.69% 0 ISDN
207 226701532 790289944 286 3.52% 2.89% 2.68% 0 VTSP
61 262232 529665 495 2.03% 2.16% 1.04% 0 AFW_application_
206 319808168-1186847347 0 2.62% 2.27% 2.16% 0 DSMP
233 37460 57790 648 1.63% 1.10% 0.02% 0 AFW_application_
3 293876 595003 493 1.63% 2.38% 2.06% 0 AFW_application_
205 70108356 455758882 153 1.06% 0.72% 0.74% 0 Resource Monitor
245 129219428 972383769 132 0.90% 0.93% 0.01% 0 ISDN L2 Process
208 43246508 321780241 134 0.57% 0.38% 0.37% 0 TSP
4 35595820 258014603 137 0.57% 0.32% 0.32% 0 EDDRI_MAIN
37 162961592 35154923 4635 0.40% 0.53% 0.56% 0 Per-Second Jobs
200 33113344 140290609 236 0.32% 0.56% 0.53% 0 CC-API_VCM
198 35068732 7031070 4987 0.16% 0.13% 0.13% 0 Compute load avg
175 15677516 144379255 108 0.16% 0.08% 0.08% 0 AAA SEND STOP EV
33 16841100 32895103 511 0.16% 0.07% 0.06% 0 Net Background
92 6052176 398473472 15 0.08% 0.04% 0.02% 0 RUDP Main Proces
On this MGW we have full E1 means 16 E1s & total calls we observed during this is around 458 to 482 active callslls.
our MGW IOS is 12.4(22) & we are not using Radius AAA.
Mpneers,
Can you tell me i can see few logs like callid rejected. means at that time that call rejected within MGW. so such failed call failed as what Abondon or what is ISDN cause code?
Please help me with this
Amit-- -
ADF_FACES-60097:For more information, please see the server's error log for
HI
when we login in to the Em and then try to navigate to the core applications server under the business intelligence Domain it gives the bellow Error message
Stream closed
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #5
and when we check the server error log then we got the below log
>
####<Jun 2, 2013 10:08:05 AM GST> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <obitst.oasiserp.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d02e32166b4c953b:7cceca3a:13ef5c15d45:-8000-000000000000065f> <1370153285886> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #2
java.io.IOException: Stream closed
at java.io.BufferedInputStream.getInIfOpen(BufferedInputStream.java:134)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:416)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:315)
at oracle.jsp.parse.XMLUtil.getDocument(XMLUtil.java:447)
at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:402)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:385)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:810)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:734)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.JSPFilter.doFilter(JSPFilter.java:93)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:157)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>Hi Timo,
I check it :
Caused by: java.lang.NullPointerException
at cic.portal.Currencys.createCurrency(Currencys.java:24)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
... 56 more
When i click: at cic.portal.Currencys.createCurrency(Currencys.java:24) ---> it's call to method beans:
public void createCurrency(PopupFetchEvent popupFetchEvent) {
if (popupFetchEvent.getLaunchSourceClientId().contains("create")) {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
operationBinding.execute();
this method is Popup: popupFetchListener="#{currencys.createCurrency}">
I thing lines :
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
operationBinding.execute();
it not working, i have no idea for this.. -
Dml error logging for tables in 10.2.0.5
Hi experts,
I have problems loading error records into the shadow table specified in the configuration window for tables. Upon executing the mapping, the execution results show warnings with the error records but these records were not moved to the shadow/error table.
The actual scenario is: I specified a non-null data rule on the supplier_code column in the supplier table. Inside the mapping where I used this supplier table, I choose the option "Move to error" for this non-null data rule. Upon executing, it seems that owb treats these as warnings and not errors and thus did not propagate them to the error table. Anyone has any suggestion as to how to make use of the error tables in owb?DML error logging is generated for set-based PL/SQL mappings if the following conditions are satisfied:
1. the Error table name property is set for the operator (table/view/mv)
2. the PL/SQL Generated Mode of the module that contains the mapping is set to 10gR2 and above or Default.
If the value is set to Default, ensure that location associated with the module has the Version set to 10.2 or above.
When you use a data object in a mapping, the Error Table Name property for this data object is derived from the shadow table name property of the data object . If you modify the error table name of a data object (using the shadow table name property), you must synchronize all the operators bound to this data object.
If you are still facing the issue then provide your email and I can send a simple example of data rule mapping in OWB 10.2.0.5
Sutirtha -
Not getting entry in error logs for SP2
Hi All,
I am using SP2 on Solaris 5.9. I got the below entry in the access logs.
75.187.38.17 - - [05/Dec/2007:00:25:07 -0500] "POST /test/testmac.htmlPOST " 400 147
74.197.120.159 - - [05/Dec/2007:00:26:02 -0500] "" 400 147
76.118.146.74 - - [05/Dec/2007:00:29:27 -0500] "" 400 147
66.159.193.19 - - [05/Dec/2007:00:31:17 -0500] "" 400 147
As it is visible that request resulted 400 response code, but I don't see any entry in the error logs.
Do I need to enable something for this in magnus.conf ?
At present for errors I have the following settings in the magnus.conf as
ErrorLog /data/servers/dir/logs/errors.
Any help would be highly appreciated.
Thanks and regards
-A400 bad requests are not logged in error logs. That usually means the request sent is malformed.
According to RFC http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
"10.4.1 400 Bad Request
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. "
Try attaching ssltap in between web server and browser and see what request was sent to the server.
$/usr/sfw/bin/ssltap -h
SSLTAP (C) 1997, 1998 Netscape Communications Corporation.
Usage: ssltap [-vhfsxl] [-p port] hostname:port
-v [prints version string]
-h [outputs hex instead of ASCII]
-f [turn on Fancy HTML coloring]
-s [turn on SSL decoding]
-x [turn on extra SSL hex dumps]
-p port [specify rendezvous port (default 1924)]
-l [loop - continue to wait for more connections]
$ssltap -l -p 1924 wshostname:wsport
send browser's request to 1924.
"[05/Dec/2007:08:54:37] failure (16852): Connection queue full, closing socket"
This error message means that server is under heavy load and connection queue is full. Try tweaking
MaxKeepAliveConnections and ConnQueueSize parameters in magnus.conf.
For more info refer :
Sun ONE Web Server 6.1 Performance Tuning, Sizing, and Scaling Guide
http://docs.sun.com/source/817-1836-10/index.html
P/S WS 6.1 SP2 is quite old try switching to Web Server 6.1 sp8 or Web Server 7.0 update 1.
Edited by: mv on Dec 5, 2007 2:16 PM -
Error logging into business rules
Hi,
I've installed EPM 11.1.2.1 in my PC and all the services seems to be up and running but when i'm trying to access business rules from eas console it's showing me the below error -
Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules.
Detail:Error while sending command to HBR Server running within the EAS server.
Detail:com.hyperion.hbr.excp.DatabaseException.<init>(java.lang.String, [Ljava.lang.Object;, com.hyperion.hbr.excp.ExceptionSeverity, java.lang.Throwable)
** I'm using admin login**
Any help in this will be highly appreciated.
Thanks
AgniHi,
I've seen in sum posts that it's advised to assign interactive user role to the user in this kinda issues. After doing that I'm getting a new error -
Detail:Error creating DBRules. Cannot continue.
Detail:Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
Please help...
Thanks
Agni -
PM:Action log for Settlement rule
Dear all,
May i know are there any way that i can see the changes that being done at screen maintain settlement rule. For example if I change the settlement type, system will keep the change/action log for that changes.
One more question, what the different between settlement type 'FUL' and 'PER' (impact to the settlement)
thank you so much,
Siti NorbaidaHi,
I Hope this Documentation will help you ........
Settlement type
Depending on the processing type, the settlement type determines which settlement rule is used in a particular type of settlement processing.
The SAP system supports four settlement types. The AUC and PRE settlement types are used for settlement of capital investment measures. You can only use the PER settlement type for planned settlement.
PER (periodic settlement):
Settlement with this settlement type covers only the costs for the relevant settlement period.
The following data from internal cost allocations:
Sender cost center/activity type sent
Business process
Quantities
is allocated further to the following receivers:
Cost center
Internal order
Sales order
WBS element
Cost object
Business process
Actual activity prices, elimination of internal business volume and variances can then be calculated correctly in Cost Center Accounting and Activity-Based Accounting;
FUL (full settlement):
You can use this settlement type in automatic settlements.
The difference to periodic settlement is that in full settlement you settle each time all the costs that have occurred for a sender object for all the periods prior to the settlement (and are not yet settled). If PER rules exist, they take precedence over the FUL rule.
Quantities from internal activity allocations are not sent to the receiver. This means that there is no guarantee that actual activity prices, elimination of internal business volume, and variance calculation will take place correctly. For this reason, we do not recommend that you use FUL for cost centers or business processes.
AuC (Capitalization in asset under construction):
This settlement is automatically generated if you enter a capital investment profile with an AuC as its capital investment measure in the order control data.
Settlement is conducted periodically and in full to the AuC
PRE (periodic preliminary settlement):
You can enter PRE rules in the settlement rule for the order. They are used as part of settling capital investment measures. Depending on the rules you entered, posted debits are settled to the CO receivers or to a G/L account before the periodic settlement.
It is good idea to do this for particular line items if there are additional costs assigned to a capital investment measure that should not be capitalized. This may be necessary, should you wish to monitor the total costs of the measure in controlling.
Use
Note that settlement type FUL permits quantity settlement for primary cost elements only. You cannot settle quantities to assets.
Note that you cannot manually create or change a distribution rule with settlement type AUC. This has the following effect on settlement rule maintenance:
The required rule is generated from the asset under construction, which is stored in the master data for a capital investment measure, ( order or WBS element)when you carry out settlement for the first time.
Regards,
Gangadhar -
Error in Releasing Contracts in SRM-Error Log for user WF-BATCH
Hi,
When we are releasing contracts in SRM, an error log is being generated for a user WF-BATCH with message :
"Recipient not found
The error ocurred by processing event RELEASED_NEWLY with GUID 4530EA86C23B007700000000B0000023 and object_id= 4400000238"(Where 4400000238 is our contract no)
Also our contract is not being transported to CCM even though all the relevant configurations have been done in XI.
Is this because of the error log?? What is the issue??
Any Useful answers would be suitably rewarded..
Regards,
PuneetHello Puneet,
Please check whether u have released that contract or not.
if u need to release purchase order from the contract, it needs to be released first.
from ur problme statement, it seems u haven't released that contract.
Sarabjeet -
DML Error Logging for underlying tables autocreated for dimensions
Hi,
I have problems with logging errors during mapping for underlying tables that are automatically generated for creating dimensions. I know that DML Error Logging is supposed to work only on tables, views and materialized views, and I have tried it out using a pure table in a mapping without any reference to a dimension and specifying the error table name for it. This works perfectly. The error rows were captured correctly in the error table and the correct rows were also loaded successfully to the target table.
However when it comes to mapping to a dimension, I have some issues with that. I specified the shadowtable name for the underlying table(right clicking on the table in design center and then choosing configure), and after deploying I did check that the error table/shadow table and also the target table were indeed created in the database.
The problem lies now in the mapping because I am actually mapping to a dimension and not the underlying table the dimension references to. It seems that the mapping did not manage to capture details of the error table for the underlying table that the dimension was referencing to and thus were unable to capture the errors. Only the corrected rows get loaded and there were no error messages during the loading that suggests that the incorrect rows were detected.
Would appreciate some assistance here.
Thanks!
WYHi
The DML error logging feature in 10gR2 and 11gR1 was restricted purely to tables, so the dimension operator did not support it. This is now supported in OWB 11gR2 (plus there is the orphan management functionality).
Cheers
David
Maybe you are looking for
-
Adobe Photoshop CS5 Extended trial download
Im trying to find Adobe Photoshop CS5.0 Extended trial download for Windows 7. All I can find is the CS5.1 version. The serial number I have for that won't work.
-
Improper message in iview when "Check in Now " fails in edit locally
Hi We have implemented our own repository manager. I am facing a problem while Checking in a document after edit locally. Usually edit locally undergo followings set of activities. 1. Get the content of file using Content manager implementation a
-
Hi, Can we assign the same cheque number to multiple payment documents? If so, what is the T-code and the steps. Thanks Sridevi
-
Problem with TOMCAT again !
I�m trying to deploy to TOMCAT 5028. with .war that has no access to database no problem it works fine. but whem my .war has to access a database i got: type Exception report message description The server encountered an internal error () that preven
-
Time machine has stopped working - 'the backup volume could not be found'
i'm not sure what happened, but my macbook pro hasn't been able to backup to my time machine for the past few weeks. i get a 'delayed' message, then in time machine prefs it says 'the backup volume could not be found.' i can manually mount the backup