Error -maintain archiving parameters for outgoing documents in archive link

Hi,
I am trying to archive an outgoing document from SAP i.e. an invoice to a content repository using archive link and getting the below error:
Maintain archiving parameter(s) for output type RD00 (appl. V3)
Message no. VN096
Diagnosis
At the time of output determination, the archiving parameters for output type RD00 (application V3) were incorrectly maintained in Customizing.
Additional information:
SAP object:
Archiving object:
Procedure
Maintain the archiving parameters and repeat output determination for the required document.
Kindly help as to from which transaction I can maintain archiving parameters for this transaction ???
With Regards
Neha

Hi,
Which storage device are you using? I can only speculate the problem. Ok. So output type is configured properly. Can you check the object type for your document type in Transaction code OAC3. Check it should be VBRK. If it is not then change it to VBRK. Now go to transcation code OAD5 and check every thing is configured there or not. If it is all done then it should work. I presume that all basic customization is done in your system.
Regards
Sirfraz

Similar Messages

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

Java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.

Hi Gurus,
I am working on NWDS 7.01.00 after opening NWDS, I am getting this error. My error log file is:
java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getRootPathForCompartment(DevConfFileSystemLayout.java:202)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteSCRoot(DevConfFileSystemLayout.java:76)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteTopLevelDCsRoot(DevConfFileSystemLayout.java:169)
at com.sap.tc.devconf.impl.LocalSCNode.initializeTopLevelDCNodeList(LocalSCNode.java:41)
at com.sap.tc.devconf.impl.LocalSCNode.<init>(LocalSCNode.java:24)
at com.sap.tc.devconf.impl._Factory.createLocalSCNode(_Factory.java:385)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.getTopLevelDCsForLocalCompartment(DevelopmentConfiguration.java:3415)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB._initializeLocalEntries(ComponentSyncDB.java:788)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initializeLocalEntries(ComponentSyncDB.java:759)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initialize(ComponentSyncDB.java:436)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.retainEntriesFromCompartment(ComponentSyncDB.java:824)
at com.sap.tc.devconf.impl.LocalDCScanner.refreshSyncDBForLocalDCs(LocalDCScanner.java:103)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.<init>(DevelopmentConfiguration.java:378)
at com.sap.tc.devconf.impl._Factory.createDevelopmentConfiguration(_Factory.java:354)
at com.sap.tc.devconf.Factory.createDevelopmentConfiguration(Factory.java:103)
at com.sap.tc.devconf.DevelopmentConfigurationFactory._addConfiguration(DevelopmentConfigurationFactory.java:2062)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:761)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:696)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:667)
at com.sap.ide.eclipse.component.devconf.DevConfManager.createDefaultDevConf(DevConfManager.java:341)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:442)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:109)
at com.sap.ide.eclipse.component.provider.ComponentProviderPlugin$1.run(ComponentProviderPlugin.java:82)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

Maybe some plugins are missing. Try reinstall the latest version of the nwds that matches to you server version.
http://wiki.scn.sap.com/wiki/display/Java/NWDS+Download+Links

IE07 and error 'Maintain field selection for Fleet data in Equipment List'

Hi all,
When running transaction IE07 (multi-level equipment list) , I get the following error: 'Maintain field selection for Fleet data in Equipment List (Multilevel)'
I can't see where is the missing configuration point.
We have activated business function LOG_EAM_CI_3.
Have anyone encountered this error before?
Thanks,
P.

Hi Narasimhan
Could you give more details ? where is located this setting?
Thanks,
P.

Archiving of ERS messages: maintain archiving parameters for message type

Dear experts,
I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
NACE: application "MR", output type "ERS"
details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
The archive "K1" is existing and working for other documents, but not for ERS.
Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
Regards, Karsten

Dear experts,
I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
NACE: application "MR", output type "ERS"
details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
The archive "K1" is existing and working for other documents, but not for ERS.
Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
Regards, Karsten

Regd:Error in Output determination for Delievry document

Hi,
we have set the output determination ~ Condition record for Ship-to-party Partner function for the delivery document.
The condn is set by using LAVA as the Output type and when we save the delivery doc, output is not getting triggered and when we try to enter the output details manually we get the below error
"Maintain outgoing EDI-connection data for partner XXXX " .
Could you please tell me what settings that I might have missed ?
RGds,
Vasanth.
Edited by: Vasantha Kumar Balasubramani on Jun 25, 2008 3:31 PM

Hi John & Sharath,
I have the partner profile defined in We20 for the Ship-To-Party for whom I am sending the delivery.I have set him as my customer(KU) in partner profile John.
Sharath, I know we have 2 EDI settings at VOE2 and VOE4 but both of them are for inbound messages. Could you please tell me what else EDI settings do i need to do ?
Thanks in advance.
RGds,
Vasanth.

Error in scheduling parameters for production orders

Hi Guys,
Greeting for the day u2026u2026u2026.
I am trying to create production orders creation for own order type ex MM01, but I am getting error message as u201C scheduling parameters are not defined for the order type u201C even though I have maintained following parameters as below,
Production scheduler -
xxxxx,
Detailed scheduling -
check box of scheduling ticked,
Rough cut scheduling --- scheduling id u201301, scheduling and generate capa requi,, boxes ticked,
Adjust scheduling -- requi to operation date,
Scheduling control for detailed scheduling ---backwards and check box of auto scheduling ticked
Operation segment ---setup,
All operation in order will be reduce
Do not reduce,
Could any one light on this issue,
Thanks in advance,
Mohan

Hi,
This error will come if you have not maintained Define scheduling parameters for production orders.
Check this order type whether linked with respective plant in OPU3.*And give production scheduler * mark ie, all.*
And in Define production scheduling profile - OPKP, link your order type in the page below.
In material master work scheduling view, input production sch profile or prod scheduler.
Regards,
Dharma

Error while creating Discussions for a document inside a room

Hi,
I am getting an error when i am trying to start a discussion for a document. When i go back to the details screen and try to add a discussion it shows that the discussion is actually created inspite of the error being displayed.
Thanks
Regards
Prakash

if the problem is caching try setting the useChasses to false
uc.setUseCaches(false);

Error "Account assignment 00 for purchase document does not exist " when u

Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
Upender

Hi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram

Error: No universe found for this document in the CMC

Hi,
We have a universe which drives around 45 Web Intelligence reports in Business Objects XI R2.
Recently, when I made changes in the universe and tried to export it, the Designer interface hung and further it was found that the universe file got corrupted for some reason.
Now, the administrator deleted the universe from the CMC and exported a copy of the same universe that I had saved on my local machine before exporting. He was successful in doing so. However, when the associated Webi reports are accessed, an error message " Some objects are no longer available in the universe. Error 10001 Error INF" is displayed.
In the CMC, FOLDERS> Report Properties > Universe: shows - " No document found for this document"
I know we are missing out on something simple. Any pointers will be extremely helpful.
Many thanks!!

I beleve there was a unique identifier for the old universe. You could probably restore from an old cms database backup and filestore backup to get it back that way. The other (probably better option) would be to go into the webi documents themselves and specify the universe there. I believe XIR2 had this functionality although I don't recall for sure when it was introduced (may have been 3.x). There may be some other alternatives, these are the few that came to mind initially. Good luck!

Error "maintain plant 3000 for sales area

hi,
We had two companies, 3000 and 9000. Sales order is created in company
9000, and delivery plant is 3000. however, the error message is
displayed " maintain plant 3000 for sales area". pls advice.

Hi Jojo,
Sales processing is carried out with respect to the sales area.
For a sales transaction, if u r using plant....then, plant has to be assigned to the sales organisation and distribution channel.
To assign the plant to the above stated org.units, U need to have plant in the list. Since the plant have created in other company code, U can never assign plant to the sales area of other company code.
U create a new plant in relevant company code...asign plant to company code, sales org. and dist. channel
Regards,
Praveen.

Error - Device type unsuitable for ADS documents

Hi,
I have created a print form using transaction SFP and i am doing test from transaction SFP
(Test function module )
/1BCDWB/DOCPARAMS
YCTC 0000000000
YCTCUSAGE 0000000000
Once i press f8 system asking for printer, then i have given printer name as LOCL and select print preview. then system giving error as
Cannot find PDL type for output device locl and Device type unsuitable for ADS documents
Can i anybody give info what i am doing wrong.
I have tested with FP_TEST_03 that also giving the same error
a®

Hi,
I have tried with LP01 and with some other printers in the network its giving error that "Call contained error (02)"
I tried with all FP_TEST*
but no results
a®

[CS5 Win] Switching to InDesign is slow in CS5 for certain documents. XML links?

Hi,
I put this question in the scripting part, since you might be the ones to notice such things as this, and it might relate to importing XML by scripting. Also I got no positive response in one of the other forums, "complaining" about the sluggish performance redrawing the interface when setting focus to InDesign CS5. But now I can more clearly see that it is not slow for all documents.
Having certain documents open in InDesign CS5 makes it very slow to switch to. The CPU peaks at 80-100% and it takes about a second or two until InDesign responds.
The documents do not necessarily need to be large in size, but it appears that it mostly occurrs on documents that I've imported data to (or that our customers have), using our own code, which takes care of an XML file and portions it out into templates.
One strange thing I just noticed was that selecting "relink all" by alt-clicking the relink button in the Links palette, makes InDesign look for (presumalbly) previously imported XML files. How can that be?
I never store any links to the imported XML - as far as I know. Where should I look for that kind of links?
How and why would previously imported XML file paths be stored? I just import the XML into the structure, "deal with it", and deletes the node that it was imported to. (The data is left in a structure that I build up myself.)
Does anyone know if there is a change related to any of the facts stated above, in InDesign CS5?
I'll attach a screen shot of the links dialogue (above), when it "looks for" an XML file. Could this kind of "missing file" cause the abovementioned "slowness" every time switching to InDesign from another application?
(InDesign documents that don't relate to XML doesn't make switching to InDesign slow - but it gets slow when such a document is loaded, even under a tab that is not in focus.)
Best regards,
Andreas

I've uploaded a video to demonstrate that InDesign sometimes can keep references to links:
http://www.youtube.com/watch?v=OoQOSIlfYl4
It's obvious that there are thousands of "orphans" in the documents. All XML files ever imported are kept in some way... The links (or the names of them) are obviously not removed from the document when deleting the Element in the XML Structure. Since the communication of the code with a database is built around XML import, the number of imported files is very large.
Can these orphaned link references somehow be removed? When manually checking for missing files, InDesign loops though all of the XML files as seen in the YouTube video above, but ends up saying that there are no missing files. The next time I do the same check, all links are looped through again.
Perhaps we should "link to file", using .xmlImportPreferences.createLinkToXML = true
This propery has not been explicitly set, and therfore = false. But is there any way to get rid of all the old link names that's inside the document somehow?
CS4 does the same thing, but there is "no 2 second lag time" switching from another application to InDesign CS4 with this kind of document open.

Archive Link for Outgoing Documents (BUS2201)-- Customizing

Hi experts,
I want to establish a link between SRM (7.0) and an external archiv via Archive Link.
I want to store all outgoing Purchase order within TOA table TOA02
I have mantained Basic Customizing via transaction OAC0 so far(content repository)
No I am a litte bit confused:
I mantained "actions for Document Output" for Action Profile BBP_PD_PO --> (Print and archive)
Could anyone please guide me through the other relevant customizing steps?
application server > basis-services> archive link --> basic customizing
for example
1. Edit Document Types
--> which document type do I have to chose to storage outgoing Purchase orders or where do I set the link between my Purchase Order and "my" document type?
2. Edit Links
Object Type BUS2201
Object Document --> see my question above
Contenet Repository --> my customized Content Repository
which further steps are needed?
A short guide through the basic customizign steps would be great.
Thanks a lot!
Best regards
Andreas

Hi experts,
I want to establish a link between SRM (7.0) and an external archiv via Archive Link.
I want to store all outgoing Purchase order within TOA table TOA02
I have mantained Basic Customizing via transaction OAC0 so far(content repository)
No I am a litte bit confused:
I mantained "actions for Document Output" for Action Profile BBP_PD_PO --> (Print and archive)
Could anyone please guide me through the other relevant customizing steps?
application server > basis-services> archive link --> basic customizing
for example
1. Edit Document Types
--> which document type do I have to chose to storage outgoing Purchase orders or where do I set the link between my Purchase Order and "my" document type?
2. Edit Links
Object Type BUS2201
Object Document --> see my question above
Contenet Repository --> my customized Content Repository
which further steps are needed?
A short guide through the basic customizign steps would be great.
Thanks a lot!
Best regards
Andreas

Error -maintain archiving parameters for outgoing documents in archive link

Similar Messages

Maybe you are looking for